// SPDX-License-Identifier: GPL-2.0+ /* * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget * * hub.c - virtual hub handling * * Copyright 2017 IBM Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "vhub.h" /* usb 2.0 hub device descriptor * * A few things we may want to improve here: * * - We may need to indicate TT support * - We may need a device qualifier descriptor * as devices can pretend to be usb1 or 2 * - Make vid/did overridable * - make it look like usb1 if usb1 mode forced */ #define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff)) #define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff)) enum { AST_VHUB_STR_MANUF = 3, AST_VHUB_STR_PRODUCT = 2, AST_VHUB_STR_SERIAL = 1, }; static const struct usb_device_descriptor ast_vhub_dev_desc = { .bLength = USB_DT_DEVICE_SIZE, .bDescriptorType = USB_DT_DEVICE, .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_HUB, .bDeviceSubClass = 0, .bDeviceProtocol = 1, .bMaxPacketSize0 = 64, .idVendor = cpu_to_le16(0x1d6b), .idProduct = cpu_to_le16(0x0107), .bcdDevice = cpu_to_le16(0x0100), .iManufacturer = AST_VHUB_STR_MANUF, .iProduct = AST_VHUB_STR_PRODUCT, .iSerialNumber = AST_VHUB_STR_SERIAL, .bNumConfigurations = 1, }; /* Patches to the above when forcing USB1 mode */ static void ast_vhub_patch_dev_desc_usb1(struct usb_device_descriptor *desc) { desc->bcdUSB = cpu_to_le16(0x0100); desc->bDeviceProtocol = 0; } /* * Configuration descriptor: same comments as above * regarding handling USB1 mode. */ /* * We don't use sizeof() as Linux definition of * struct usb_endpoint_descriptor contains 2 * extra bytes */ #define AST_VHUB_CONF_DESC_SIZE (USB_DT_CONFIG_SIZE + \ USB_DT_INTERFACE_SIZE + \ USB_DT_ENDPOINT_SIZE) static const struct ast_vhub_full_cdesc { struct usb_config_descriptor cfg; struct usb_interface_descriptor intf; struct usb_endpoint_descriptor ep; } __attribute__ ((packed)) ast_vhub_conf_desc = { .cfg = { .bLength = USB_DT_CONFIG_SIZE, .bDescriptorType = USB_DT_CONFIG, .wTotalLength = cpu_to_le16(AST_VHUB_CONF_DESC_SIZE), .bNumInterfaces = 1, .bConfigurationValue = 1, .iConfiguration = 0, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER | USB_CONFIG_ATT_WAKEUP, .bMaxPower = 0, }, .intf = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 0, .bAlternateSetting = 0, .bNumEndpoints = 1, .bInterfaceClass = USB_CLASS_HUB, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, .iInterface = 0, }, .ep = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = 0x81, .bmAttributes = USB_ENDPOINT_XFER_INT, .wMaxPacketSize = cpu_to_le16(1), .bInterval = 0x0c, }, }; #define AST_VHUB_HUB_DESC_SIZE (USB_DT_HUB_NONVAR_SIZE + 2) static const struct usb_hub_descriptor ast_vhub_hub_desc = { .bDescLength = AST_VHUB_HUB_DESC_SIZE, .bDescriptorType = USB_DT_HUB, .bNbrPorts = AST_VHUB_NUM_PORTS, .wHubCharacteristics = cpu_to_le16(HUB_CHAR_NO_LPSM), .bPwrOn2PwrGood = 10, .bHubContrCurrent = 0, .u.hs.DeviceRemovable[0] = 0, .u.hs.DeviceRemovable[1] = 0xff, }; /* * These strings converted to UTF-16 must be smaller than * our EP0 buffer. */ static const struct usb_string ast_vhub_str_array[] = { { .id = AST_VHUB_STR_SERIAL, .s = "00000000" }, { .id = AST_VHUB_STR_PRODUCT, .s = "USB Virtual Hub" }, { .id = AST_VHUB_STR_MANUF, .s = "Aspeed" }, { } }; static const struct usb_gadget_strings ast_vhub_strings = { .language = 0x0409, .strings = (struct usb_string *)ast_vhub_str_array }; static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep, u16 wIndex, u16 wValue) { u8 st0; EPDBG(ep, "GET_STATUS(dev)\n"); /* * Mark it as self-powered, I doubt the BMC is powered off * the USB bus ... */ st0 = 1 << USB_DEVICE_SELF_POWERED; /* * Need to double check how remote wakeup actually works * on that chip and what triggers it. */ if (ep->vhub->wakeup_en) st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; return ast_vhub_simple_reply(ep, st0, 0); } static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep, u16 wIndex, u16 wValue) { int ep_num; u8 st0 = 0; ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num); /* On the hub we have only EP 0 and 1 */ if (ep_num == 1) { if (ep->vhub->ep1_stalled) st0 |= 1 << USB_ENDPOINT_HALT; } else if (ep_num != 0) return std_req_stall; return ast_vhub_simple_reply(ep, st0, 0); } static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep, u16 wIndex, u16 wValue, bool is_set) { EPDBG(ep, "%s_FEATURE(dev val=%02x)\n", is_set ? "SET" : "CLEAR", wValue); if (wValue != USB_DEVICE_REMOTE_WAKEUP) return std_req_stall; ep->vhub->wakeup_en = is_set; EPDBG(ep, "Hub remote wakeup %s\n", is_set ? "enabled" : "disabled"); return std_req_complete; } static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep, u16 wIndex, u16 wValue, bool is_set) { int ep_num; u32 reg; ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n", is_set ? "SET" : "CLEAR", ep_num, wValue); if (ep_num > 1) return std_req_stall; if (wValue != USB_ENDPOINT_HALT) return std_req_stall; if (ep_num == 0) return std_req_complete; EPDBG(ep, "%s stall on EP 1\n", is_set ? "setting" : "clearing"); ep->vhub->ep1_stalled = is_set; reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL); if (is_set) { reg |= VHUB_EP1_CTRL_STALL; } else { reg &= ~VHUB_EP1_CTRL_STALL; reg |= VHUB_EP1_CTRL_RESET_TOGGLE; } writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL); return std_req_complete; } static int ast_vhub_rep_desc(struct ast_vhub_ep *ep, u8 desc_type, u16 len) { size_t dsize; EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type); /* * Copy first to EP buffer and send from there, so * we can do some in-place patching if needed. We know * the EP buffer is big enough but ensure that doesn't * change. We do that now rather than later after we * have checked sizes etc... to avoid a gcc bug where * it thinks len is constant and barfs about read * overflows in memcpy. */ switch(desc_type) { case USB_DT_DEVICE: dsize = USB_DT_DEVICE_SIZE; memcpy(ep->buf, &ast_vhub_dev_desc, dsize); BUILD_BUG_ON(dsize > sizeof(ast_vhub_dev_desc)); BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET); break; case USB_DT_CONFIG: dsize = AST_VHUB_CONF_DESC_SIZE; memcpy(ep->buf, &ast_vhub_conf_desc, dsize); BUILD_BUG_ON(dsize > sizeof(ast_vhub_conf_desc)); BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); break; case USB_DT_HUB: dsize = AST_VHUB_HUB_DESC_SIZE; memcpy(ep->buf, &ast_vhub_hub_desc, dsize); BUILD_BUG_ON(dsize > sizeof(ast_vhub_hub_desc)); BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); break; default: return std_req_stall; } /* Crop requested length */ if (len > dsize) len = dsize; /* Patch it if forcing USB1 */ if (desc_type == USB_DT_DEVICE && ep->vhub->force_usb1) ast_vhub_patch_dev_desc_usb1(ep->buf); /* Shoot it from the EP buffer */ return ast_vhub_reply(ep, NULL, len); } static int ast_vhub_rep_string(struct ast_vhub_ep *ep, u8 string_id, u16 lang_id, u16 len) { int rc = usb_gadget_get_string (&ast_vhub_strings, string_id, ep->buf); /* * This should never happen unless we put too big strings in * the array above */ BUG_ON(rc >= AST_VHUB_EP0_MAX_PACKET); if (rc < 0) return std_req_stall; /* Shoot it from the EP buffer */ return ast_vhub_reply(ep, NULL, min_t(u16, rc, len)); } enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, struct usb_ctrlrequest *crq) { struct ast_vhub *vhub = ep->vhub; u16 wValue, wIndex, wLength; wValue = le16_to_cpu(crq->wValue); wIndex = le16_to_cpu(crq->wIndex); wLength = le16_to_cpu(crq->wLength); /* First packet, grab speed */ if (vhub->speed == USB_SPEED_UNKNOWN) { u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS); if (ustat & VHUB_USBSTS_HISPEED) vhub->speed = USB_SPEED_HIGH; else vhub->speed = USB_SPEED_FULL; UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat, vhub->speed == USB_SPEED_HIGH ? "high" : "full"); } switch ((crq->bRequestType << 8) | crq->bRequest) { /* SET_ADDRESS */ case DeviceOutRequest | USB_REQ_SET_ADDRESS: EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue); writel(wValue, vhub->regs + AST_VHUB_CONF); return std_req_complete; /* GET_STATUS */ case DeviceRequest | USB_REQ_GET_STATUS: return ast_vhub_hub_dev_status(ep, wIndex, wValue); case InterfaceRequest | USB_REQ_GET_STATUS: return ast_vhub_simple_reply(ep, 0, 0); case EndpointRequest | USB_REQ_GET_STATUS: return ast_vhub_hub_ep_status(ep, wIndex, wValue); /* SET/CLEAR_FEATURE */ case DeviceOutRequest | USB_REQ_SET_FEATURE: return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true); case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false); case EndpointOutRequest | USB_REQ_SET_FEATURE: return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true); case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false); /* GET/SET_CONFIGURATION */ case DeviceRequest | USB_REQ_GET_CONFIGURATION: return ast_vhub_simple_reply(ep, 1); case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: if (wValue != 1) return std_req_stall; return std_req_complete; /* GET_DESCRIPTOR */ case DeviceRequest | USB_REQ_GET_DESCRIPTOR: switch (wValue >> 8) { case USB_DT_DEVICE: case USB_DT_CONFIG: return ast_vhub_rep_desc(ep, wValue >> 8, wLength); case USB_DT_STRING: return ast_vhub_rep_string(ep, wValue & 0xff, wIndex, wLength); } return std_req_stall; /* GET/SET_INTERFACE */ case DeviceRequest | USB_REQ_GET_INTERFACE: return ast_vhub_simple_reply(ep, 0); case DeviceOutRequest | USB_REQ_SET_INTERFACE: if (wValue != 0 || wIndex != 0) return std_req_stall; return std_req_complete; } return std_req_stall; } static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub, unsigned int port) { /* Update HW EP1 response */ u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG); u32 pmask = (1 << (port + 1)); if (vhub->ports[port].change) reg |= pmask; else reg &= ~pmask; writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG); } static void ast_vhub_change_port_stat(struct ast_vhub *vhub, unsigned int port, u16 clr_flags, u16 set_flags, bool set_c) { struct ast_vhub_port *p = &vhub->ports[port]; u16 prev; /* Update port status */ prev = p->status; p->status = (prev & ~clr_flags) | set_flags; DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n", port + 1, prev, p->status, set_c); /* Update change bits if needed */ if (set_c) { u16 chg = p->status ^ prev; /* Only these are relevant for change */ chg &= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | USB_PORT_STAT_C_OVERCURRENT | USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_L1; p->change |= chg; ast_vhub_update_hub_ep1(vhub, port); } } static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub) { u32 reg = readl(vhub->regs + AST_VHUB_CTRL); UDCDBG(vhub, "Waking up host !\n"); reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP; writel(reg, vhub->regs + AST_VHUB_CTRL); } void ast_vhub_device_connect(struct ast_vhub *vhub, unsigned int port, bool on) { if (on) ast_vhub_change_port_stat(vhub, port, 0, USB_PORT_STAT_CONNECTION, true); else ast_vhub_change_port_stat(vhub, port, USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE, 0, true); /* * If the hub is set to wakup the host on connection events * then send a wakeup. */ if (vhub->wakeup_en) ast_vhub_send_host_wakeup(vhub); } static void ast_vhub_wake_work(struct work_struct *work) { struct ast_vhub *vhub = container_of(work, struct ast_vhub, wake_work); unsigned long flags; unsigned int i; /* * Wake all sleeping ports. If a port is suspended by * the host suspend (without explicit state suspend), * we let the normal host wake path deal with it later. */ spin_lock_irqsave(&vhub->lock, flags); for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { struct ast_vhub_port *p = &vhub->ports[i]; if (!(p->status & USB_PORT_STAT_SUSPEND)) continue; ast_vhub_change_port_stat(vhub, i, USB_PORT_STAT_SUSPEND, 0, true); ast_vhub_dev_resume(&p->dev); } ast_vhub_send_host_wakeup(vhub); spin_unlock_irqrestore(&vhub->lock, flags); } void ast_vhub_hub_wake_all(struct ast_vhub *vhub) { /* * A device is trying to wake the world, because this * can recurse into the device, we break the call chain * using a work queue */ schedule_work(&vhub->wake_work); } static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port) { struct ast_vhub_port *p = &vhub->ports[port]; u16 set, clr, speed; /* First mark disabled */ ast_vhub_change_port_stat(vhub, port, USB_PORT_STAT_ENABLE | USB_PORT_STAT_SUSPEND, USB_PORT_STAT_RESET, false); if (!p->dev.driver) return; /* * This will either "start" the port or reset the * device if already started... */ ast_vhub_dev_reset(&p->dev); /* Grab the right speed */ speed = p->dev.driver->max_speed; if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed) speed = vhub->speed; switch (speed) { case USB_SPEED_LOW: set = USB_PORT_STAT_LOW_SPEED; clr = USB_PORT_STAT_HIGH_SPEED; break; case USB_SPEED_FULL: set = 0; clr = USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED; break; case USB_SPEED_HIGH: set = USB_PORT_STAT_HIGH_SPEED; clr = USB_PORT_STAT_LOW_SPEED; break; default: UDCDBG(vhub, "Unsupported speed %d when" " connecting device\n", speed); return; } clr |= USB_PORT_STAT_RESET; set |= USB_PORT_STAT_ENABLE; /* This should ideally be delayed ... */ ast_vhub_change_port_stat(vhub, port, clr, set, true); } static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep, u8 port, u16 feat) { struct ast_vhub *vhub = ep->vhub; struct ast_vhub_port *p; if (port == 0 || port > AST_VHUB_NUM_PORTS) return std_req_stall; port--; p = &vhub->ports[port]; switch(feat) { case USB_PORT_FEAT_SUSPEND: if (!(p->status & USB_PORT_STAT_ENABLE)) return std_req_complete; ast_vhub_change_port_stat(vhub, port, 0, USB_PORT_STAT_SUSPEND, false); ast_vhub_dev_suspend(&p->dev); return std_req_complete; case USB_PORT_FEAT_RESET: EPDBG(ep, "Port reset !\n"); ast_vhub_port_reset(vhub, port); return std_req_complete; case USB_PORT_FEAT_POWER: /* * On Power-on, we mark the connected flag changed, * if there's a connected device, some hosts will * otherwise fail to detect it. */ if (p->status & USB_PORT_STAT_CONNECTION) { p->change |= USB_PORT_STAT_C_CONNECTION; ast_vhub_update_hub_ep1(vhub, port); } return std_req_complete; case USB_PORT_FEAT_TEST: case USB_PORT_FEAT_INDICATOR: /* We don't do anything with these */ return std_req_complete; } return std_req_stall; } static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep, u8 port, u16 feat) { struct ast_vhub *vhub = ep->vhub; struct ast_vhub_port *p; if (port == 0 || port > AST_VHUB_NUM_PORTS) return std_req_stall; port--; p = &vhub->ports[port]; switch(feat) { case USB_PORT_FEAT_ENABLE: ast_vhub_change_port_stat(vhub, port, USB_PORT_STAT_ENABLE | USB_PORT_STAT_SUSPEND, 0, false); ast_vhub_dev_suspend(&p->dev); return std_req_complete; case USB_PORT_FEAT_SUSPEND: if (!(p->status & USB_PORT_STAT_SUSPEND)) return std_req_complete; ast_vhub_change_port_stat(vhub, port, USB_PORT_STAT_SUSPEND, 0, false); ast_vhub_dev_resume(&p->dev); return std_req_complete; case USB_PORT_FEAT_POWER: /* We don't do power control */ return std_req_complete; case USB_PORT_FEAT_INDICATOR: /* We don't have indicators */ return std_req_complete; case USB_PORT_FEAT_C_CONNECTION: case USB_PORT_FEAT_C_ENABLE: case USB_PORT_FEAT_C_SUSPEND: case USB_PORT_FEAT_C_OVER_CURRENT: case USB_PORT_FEAT_C_RESET: /* Clear state-change feature */ p->change &= ~(1u << (feat - 16)); ast_vhub_update_hub_ep1(vhub, port); return std_req_complete; } return std_req_stall; } static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep, u8 port) { struct ast_vhub *vhub = ep->vhub; u16 stat, chg; if (port == 0 || port > AST_VHUB_NUM_PORTS) return std_req_stall; port--; stat = vhub->ports[port].status; chg = vhub->ports[port].change; /* We always have power */ stat |= USB_PORT_STAT_POWER; EPDBG(ep, " port status=%04x change=%04x\n", stat, chg); return ast_vhub_simple_reply(ep, stat & 0xff, stat >> 8, chg & 0xff, chg >> 8); } enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, struct usb_ctrlrequest *crq) { u16 wValue, wIndex, wLength; wValue = le16_to_cpu(crq->wValue); wIndex = le16_to_cpu(crq->wIndex); wLength = le16_to_cpu(crq->wLength); switch ((crq->bRequestType << 8) | crq->bRequest) { case GetHubStatus: EPDBG(ep, "GetHubStatus\n"); return ast_vhub_simple_reply(ep, 0, 0, 0, 0); case GetPortStatus: EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff); return ast_vhub_get_port_stat(ep, wIndex & 0xf); case GetHubDescriptor: if (wValue != (USB_DT_HUB << 8)) return std_req_stall; EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff); return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength); case SetHubFeature: case ClearHubFeature: EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue); /* No feature, just complete the requests */ if (wValue == C_HUB_LOCAL_POWER || wValue == C_HUB_OVER_CURRENT) return std_req_complete; return std_req_stall; case SetPortFeature: EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue); return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue); case ClearPortFeature: EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue); return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue); default: EPDBG(ep, "Unknown class request\n"); } return std_req_stall; } void ast_vhub_hub_suspend(struct ast_vhub *vhub) { unsigned int i; UDCDBG(vhub, "USB bus suspend\n"); if (vhub->suspended) return; vhub->suspended = true; /* * Forward to unsuspended ports without changing * their connection status. */ for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { struct ast_vhub_port *p = &vhub->ports[i]; if (!(p->status & USB_PORT_STAT_SUSPEND)) ast_vhub_dev_suspend(&p->dev); } } void ast_vhub_hub_resume(struct ast_vhub *vhub) { unsigned int i; UDCDBG(vhub, "USB bus resume\n"); if (!vhub->suspended) return; vhub->suspended = false; /* * Forward to unsuspended ports without changing * their connection status. */ for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { struct ast_vhub_port *p = &vhub->ports[i]; if (!(p->status & USB_PORT_STAT_SUSPEND)) ast_vhub_dev_resume(&p->dev); } } void ast_vhub_hub_reset(struct ast_vhub *vhub) { unsigned int i; UDCDBG(vhub, "USB bus reset\n"); /* * Is the speed known ? If not we don't care, we aren't * initialized yet and ports haven't been enabled. */ if (vhub->speed == USB_SPEED_UNKNOWN) return; /* We aren't suspended anymore obviously */ vhub->suspended = false; /* No speed set */ vhub->speed = USB_SPEED_UNKNOWN; /* Wakeup not enabled anymore */ vhub->wakeup_en = false; /* * Clear all port status, disable gadgets and "suspend" * them. They will be woken up by a port reset. */ for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { struct ast_vhub_port *p = &vhub->ports[i]; /* Only keep the connected flag */ p->status &= USB_PORT_STAT_CONNECTION; p->change = 0; /* Suspend the gadget if any */ ast_vhub_dev_suspend(&p->dev); } /* Cleanup HW */ writel(0, vhub->regs + AST_VHUB_CONF); writel(0, vhub->regs + AST_VHUB_EP0_CTRL); writel(VHUB_EP1_CTRL_RESET_TOGGLE | VHUB_EP1_CTRL_ENABLE, vhub->regs + AST_VHUB_EP1_CTRL); writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); } void ast_vhub_init_hub(struct ast_vhub *vhub) { vhub->speed = USB_SPEED_UNKNOWN; INIT_WORK(&vhub->wake_work, ast_vhub_wake_work); }