#include #include #include #include #include #include #include #include #include #include #include "amba-clcd-versatile.h" static struct clcd_panel vga = { .mode = { .name = "VGA", .refresh = 60, .xres = 640, .yres = 480, .pixclock = 39721, .left_margin = 40, .right_margin = 24, .upper_margin = 32, .lower_margin = 11, .hsync_len = 96, .vsync_len = 2, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, .bpp = 16, }; static struct clcd_panel xvga = { .mode = { .name = "XVGA", .refresh = 60, .xres = 1024, .yres = 768, .pixclock = 15748, .left_margin = 152, .right_margin = 48, .upper_margin = 23, .lower_margin = 3, .hsync_len = 104, .vsync_len = 4, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, .bpp = 16, }; /* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */ static struct clcd_panel sanyo_tm38qv67a02a = { .mode = { .name = "Sanyo TM38QV67A02A", .refresh = 116, .xres = 320, .yres = 240, .pixclock = 100000, .left_margin = 6, .right_margin = 6, .upper_margin = 5, .lower_margin = 5, .hsync_len = 6, .vsync_len = 6, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551, .bpp = 16, }; static struct clcd_panel sanyo_2_5_in = { .mode = { .name = "Sanyo QVGA Portrait", .refresh = 116, .xres = 240, .yres = 320, .pixclock = 100000, .left_margin = 20, .right_margin = 10, .upper_margin = 2, .lower_margin = 2, .hsync_len = 10, .vsync_len = 2, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551, .bpp = 16, }; /* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */ static struct clcd_panel epson_l2f50113t00 = { .mode = { .name = "Epson L2F50113T00", .refresh = 390, .xres = 176, .yres = 220, .pixclock = 62500, .left_margin = 3, .right_margin = 2, .upper_margin = 1, .lower_margin = 0, .hsync_len = 3, .vsync_len = 2, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .caps = CLCD_CAP_5551, .bpp = 16, }; static struct clcd_panel *panels[] = { &vga, &xvga, &sanyo_tm38qv67a02a, &sanyo_2_5_in, &epson_l2f50113t00, }; struct clcd_panel *versatile_clcd_get_panel(const char *name) { int i; for (i = 0; i < ARRAY_SIZE(panels); i++) if (strcmp(panels[i]->mode.name, name) == 0) break; if (i < ARRAY_SIZE(panels)) return panels[i]; pr_err("CLCD: couldn't get parameters for panel %s\n", name); return NULL; } int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) { dma_addr_t dma; fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, framesize, &dma, GFP_KERNEL); if (!fb->fb.screen_base) { pr_err("CLCD: unable to map framebuffer\n"); return -ENOMEM; } fb->fb.fix.smem_start = dma; fb->fb.fix.smem_len = framesize; return 0; } int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) { return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, fb->fb.fix.smem_start, fb->fb.fix.smem_len); } void versatile_clcd_remove_dma(struct clcd_fb *fb) { dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, fb->fb.fix.smem_start); } #ifdef CONFIG_OF static struct regmap *versatile_syscon_map; static struct regmap *versatile_ib2_map; /* * We detect the different syscon types from the compatible strings. */ enum versatile_clcd { INTEGRATOR_CLCD_CM, VERSATILE_CLCD, REALVIEW_CLCD_EB, REALVIEW_CLCD_PB1176, REALVIEW_CLCD_PB11MP, REALVIEW_CLCD_PBA8, REALVIEW_CLCD_PBX, }; static const struct of_device_id versatile_clcd_of_match[] = { { .compatible = "arm,core-module-integrator", .data = (void *)INTEGRATOR_CLCD_CM, }, { .compatible = "arm,versatile-sysreg", .data = (void *)VERSATILE_CLCD, }, { .compatible = "arm,realview-eb-syscon", .data = (void *)REALVIEW_CLCD_EB, }, { .compatible = "arm,realview-pb1176-syscon", .data = (void *)REALVIEW_CLCD_PB1176, }, { .compatible = "arm,realview-pb11mp-syscon", .data = (void *)REALVIEW_CLCD_PB11MP, }, { .compatible = "arm,realview-pba8-syscon", .data = (void *)REALVIEW_CLCD_PBA8, }, { .compatible = "arm,realview-pbx-syscon", .data = (void *)REALVIEW_CLCD_PBX, }, {}, }; /* * Core module CLCD control on the Integrator/CP, bits * 8 thru 19 of the CM_CONTROL register controls a bunch * of CLCD settings. */ #define INTEGRATOR_HDR_CTRL_OFFSET 0x0C #define INTEGRATOR_CLCD_LCDBIASEN BIT(8) #define INTEGRATOR_CLCD_LCDBIASUP BIT(9) #define INTEGRATOR_CLCD_LCDBIASDN BIT(10) /* Bits 11,12,13 controls the LCD type */ #define INTEGRATOR_CLCD_LCDMUX_MASK (BIT(11)|BIT(12)|BIT(13)) #define INTEGRATOR_CLCD_LCDMUX_LCD24 BIT(11) #define INTEGRATOR_CLCD_LCDMUX_VGA565 BIT(12) #define INTEGRATOR_CLCD_LCDMUX_SHARP (BIT(11)|BIT(12)) #define INTEGRATOR_CLCD_LCDMUX_VGA555 BIT(13) #define INTEGRATOR_CLCD_LCDMUX_VGA24 (BIT(11)|BIT(12)|BIT(13)) #define INTEGRATOR_CLCD_LCD0_EN BIT(14) #define INTEGRATOR_CLCD_LCD1_EN BIT(15) /* R/L flip on Sharp */ #define INTEGRATOR_CLCD_LCD_STATIC1 BIT(16) /* U/D flip on Sharp */ #define INTEGRATOR_CLCD_LCD_STATIC2 BIT(17) /* No connection on Sharp */ #define INTEGRATOR_CLCD_LCD_STATIC BIT(18) /* 0 = 24bit VGA, 1 = 18bit VGA */ #define INTEGRATOR_CLCD_LCD_N24BITEN BIT(19) #define INTEGRATOR_CLCD_MASK (INTEGRATOR_CLCD_LCDBIASEN | \ INTEGRATOR_CLCD_LCDBIASUP | \ INTEGRATOR_CLCD_LCDBIASDN | \ INTEGRATOR_CLCD_LCDMUX_MASK | \ INTEGRATOR_CLCD_LCD0_EN | \ INTEGRATOR_CLCD_LCD1_EN | \ INTEGRATOR_CLCD_LCD_STATIC1 | \ INTEGRATOR_CLCD_LCD_STATIC2 | \ INTEGRATOR_CLCD_LCD_STATIC | \ INTEGRATOR_CLCD_LCD_N24BITEN) static void integrator_clcd_enable(struct clcd_fb *fb) { struct fb_var_screeninfo *var = &fb->fb.var; u32 val; dev_info(&fb->dev->dev, "enable Integrator CLCD connectors\n"); /* FIXME: really needed? */ val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 | INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN; if (var->bits_per_pixel <= 8 || (var->bits_per_pixel == 16 && var->green.length == 5)) /* Pseudocolor, RGB555, BGR555 */ val |= INTEGRATOR_CLCD_LCDMUX_VGA555; else if (fb->fb.var.bits_per_pixel <= 16) /* truecolor RGB565 */ val |= INTEGRATOR_CLCD_LCDMUX_VGA565; else val = 0; /* no idea for this, don't trust the docs */ regmap_update_bits(versatile_syscon_map, INTEGRATOR_HDR_CTRL_OFFSET, INTEGRATOR_CLCD_MASK, val); } /* * This configuration register in the Versatile and RealView * family is uniformly present but appears more and more * unutilized starting with the RealView series. */ #define SYS_CLCD 0x50 #define SYS_CLCD_MODE_MASK (BIT(0)|BIT(1)) #define SYS_CLCD_MODE_888 0 #define SYS_CLCD_MODE_5551 BIT(0) #define SYS_CLCD_MODE_565_R_LSB BIT(1) #define SYS_CLCD_MODE_565_B_LSB (BIT(0)|BIT(1)) #define SYS_CLCD_CONNECTOR_MASK (BIT(2)|BIT(3)|BIT(4)|BIT(5)) #define SYS_CLCD_NLCDIOON BIT(2) #define SYS_CLCD_VDDPOSSWITCH BIT(3) #define SYS_CLCD_PWR3V5SWITCH BIT(4) #define SYS_CLCD_VDDNEGSWITCH BIT(5) #define SYS_CLCD_TSNSS BIT(6) /* touchscreen enable */ #define SYS_CLCD_SSPEXP BIT(7) /* SSP expansion enable */ /* The Versatile can detect the connected panel type */ #define SYS_CLCD_CLCDID_MASK (BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)) #define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) #define SYS_CLCD_ID_SHARP_8_4 (0x01 << 8) #define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) #define SYS_CLCD_TSNDAV BIT(13) /* data ready from TS */ /* IB2 control register for the Versatile daughterboard */ #define IB2_CTRL 0x00 #define IB2_CTRL_LCD_SD BIT(1) /* 1 = shut down LCD */ #define IB2_CTRL_LCD_BL_ON BIT(0) #define IB2_CTRL_LCD_MASK (BIT(0)|BIT(1)) static void versatile_clcd_disable(struct clcd_fb *fb) { dev_info(&fb->dev->dev, "disable Versatile CLCD connectors\n"); regmap_update_bits(versatile_syscon_map, SYS_CLCD, SYS_CLCD_CONNECTOR_MASK, 0); /* If we're on an IB2 daughterboard, turn off display */ if (versatile_ib2_map) { dev_info(&fb->dev->dev, "disable IB2 display\n"); regmap_update_bits(versatile_ib2_map, IB2_CTRL, IB2_CTRL_LCD_MASK, IB2_CTRL_LCD_SD); } } static void versatile_clcd_enable(struct clcd_fb *fb) { struct fb_var_screeninfo *var = &fb->fb.var; u32 val = 0; dev_info(&fb->dev->dev, "enable Versatile CLCD connectors\n"); switch (var->green.length) { case 5: val |= SYS_CLCD_MODE_5551; break; case 6: if (var->red.offset == 0) val |= SYS_CLCD_MODE_565_R_LSB; else val |= SYS_CLCD_MODE_565_B_LSB; break; case 8: val |= SYS_CLCD_MODE_888; break; } /* Set up the MUX */ regmap_update_bits(versatile_syscon_map, SYS_CLCD, SYS_CLCD_MODE_MASK, val); /* Then enable the display */ regmap_update_bits(versatile_syscon_map, SYS_CLCD, SYS_CLCD_CONNECTOR_MASK, SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH); /* If we're on an IB2 daughterboard, turn on display */ if (versatile_ib2_map) { dev_info(&fb->dev->dev, "enable IB2 display\n"); regmap_update_bits(versatile_ib2_map, IB2_CTRL, IB2_CTRL_LCD_MASK, IB2_CTRL_LCD_BL_ON); } } static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) { clcdfb_decode(fb, regs); /* Always clear BGR for RGB565: we do the routing externally */ if (fb->fb.var.green.length == 6) regs->cntl &= ~CNTL_BGR; } static void realview_clcd_disable(struct clcd_fb *fb) { dev_info(&fb->dev->dev, "disable RealView CLCD connectors\n"); regmap_update_bits(versatile_syscon_map, SYS_CLCD, SYS_CLCD_CONNECTOR_MASK, 0); } static void realview_clcd_enable(struct clcd_fb *fb) { dev_info(&fb->dev->dev, "enable RealView CLCD connectors\n"); regmap_update_bits(versatile_syscon_map, SYS_CLCD, SYS_CLCD_CONNECTOR_MASK, SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH); } struct versatile_panel { u32 id; char *compatible; bool ib2; }; static const struct versatile_panel versatile_panels[] = { { .id = SYS_CLCD_ID_VGA, .compatible = "VGA", }, { .id = SYS_CLCD_ID_SANYO_3_8, .compatible = "sanyo,tm38qv67a02a", }, { .id = SYS_CLCD_ID_SHARP_8_4, .compatible = "sharp,lq084v1dg21", }, { .id = SYS_CLCD_ID_EPSON_2_2, .compatible = "epson,l2f50113t00", }, { .id = SYS_CLCD_ID_SANYO_2_5, .compatible = "sanyo,alr252rgt", .ib2 = true, }, }; static void versatile_panel_probe(struct device *dev, struct device_node *panel) { struct versatile_panel const *vpanel = NULL; u32 val; int ret; int i; /* * The Versatile CLCD has a panel auto-detection mechanism. * We use this and look for the compatible panel in the * device tree. */ ret = regmap_read(versatile_syscon_map, SYS_CLCD, &val); if (ret) { dev_err(dev, "cannot read CLCD syscon register\n"); return; } val &= SYS_CLCD_CLCDID_MASK; /* First find corresponding panel information */ for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) { vpanel = &versatile_panels[i]; if (val == vpanel->id) { dev_err(dev, "autodetected panel \"%s\"\n", vpanel->compatible); break; } } if (i == ARRAY_SIZE(versatile_panels)) { dev_err(dev, "could not auto-detect panel\n"); return; } if (!of_device_is_compatible(panel, vpanel->compatible)) dev_err(dev, "panel in DT is not compatible with the " "auto-detected panel, continuing anyway\n"); /* * If we have a Sanyo 2.5" port * that we're running on an IB2 and proceed to look for the * IB2 syscon regmap. */ if (!vpanel->ib2) return; versatile_ib2_map = syscon_regmap_lookup_by_compatible( "arm,versatile-ib2-syscon"); if (IS_ERR(versatile_ib2_map)) { dev_err(dev, "could not locate IB2 control register\n"); versatile_ib2_map = NULL; return; } } int versatile_clcd_init_panel(struct clcd_fb *fb, struct device_node *panel) { const struct of_device_id *clcd_id; enum versatile_clcd versatile_clcd_type; struct device_node *np; struct regmap *map; struct device *dev = &fb->dev->dev; np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match, &clcd_id); if (!np) { /* Vexpress does not have this */ return 0; } versatile_clcd_type = (enum versatile_clcd)clcd_id->data; map = syscon_node_to_regmap(np); if (IS_ERR(map)) { dev_err(dev, "no Versatile syscon regmap\n"); return PTR_ERR(map); } switch (versatile_clcd_type) { case INTEGRATOR_CLCD_CM: versatile_syscon_map = map; fb->board->enable = integrator_clcd_enable; /* Override the caps, we have only these */ fb->board->caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888; dev_info(dev, "set up callbacks for Integrator PL110\n"); break; case VERSATILE_CLCD: versatile_syscon_map = map; fb->board->enable = versatile_clcd_enable; fb->board->disable = versatile_clcd_disable; fb->board->decode = versatile_clcd_decode; versatile_panel_probe(dev, panel); dev_info(dev, "set up callbacks for Versatile\n"); break; case REALVIEW_CLCD_EB: case REALVIEW_CLCD_PB1176: case REALVIEW_CLCD_PB11MP: case REALVIEW_CLCD_PBA8: case REALVIEW_CLCD_PBX: versatile_syscon_map = map; fb->board->enable = realview_clcd_enable; fb->board->disable = realview_clcd_disable; dev_info(dev, "set up callbacks for RealView PL111\n"); break; default: dev_info(dev, "unknown Versatile system controller\n"); break; } return 0; } EXPORT_SYMBOL_GPL(versatile_clcd_init_panel); #endif