// SPDX-License-Identifier: GPL-2.0-or-later /* * Watchdog Timer Driver * for ITE IT87xx Environment Control - Low Pin Count Input / Output * * (c) Copyright 2007 Oliver Schuster * * Based on softdog.c by Alan Cox, * 83977f_wdt.c by Jose Goncalves, * it87.c by Chris Gauthron, Jean Delvare * * Data-sheets: Publicly available at the ITE website * http://www.ite.com.tw/ * * Support of the watchdog timers, which are available on * IT8607, IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686, * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728, * and IT8783. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #define WATCHDOG_NAME "IT87 WDT" /* Defaults for Module Parameter */ #define DEFAULT_TIMEOUT 60 #define DEFAULT_TESTMODE 0 #define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT /* IO Ports */ #define REG 0x2e #define VAL 0x2f /* Logical device Numbers LDN */ #define GPIO 0x07 /* Configuration Registers and Functions */ #define LDNREG 0x07 #define CHIPID 0x20 #define CHIPREV 0x22 /* Chip Id numbers */ #define NO_DEV_ID 0xffff #define IT8607_ID 0x8607 #define IT8620_ID 0x8620 #define IT8622_ID 0x8622 #define IT8625_ID 0x8625 #define IT8628_ID 0x8628 #define IT8655_ID 0x8655 #define IT8665_ID 0x8665 #define IT8686_ID 0x8686 #define IT8702_ID 0x8702 #define IT8705_ID 0x8705 #define IT8712_ID 0x8712 #define IT8716_ID 0x8716 #define IT8718_ID 0x8718 #define IT8720_ID 0x8720 #define IT8721_ID 0x8721 #define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */ #define IT8728_ID 0x8728 #define IT8783_ID 0x8783 /* GPIO Configuration Registers LDN=0x07 */ #define WDTCTRL 0x71 #define WDTCFG 0x72 #define WDTVALLSB 0x73 #define WDTVALMSB 0x74 /* GPIO Bits WDTCFG */ #define WDT_TOV1 0x80 #define WDT_KRST 0x40 #define WDT_TOVE 0x20 #define WDT_PWROK 0x10 /* not in it8721 */ #define WDT_INT_MASK 0x0f static unsigned int max_units, chip_type; static unsigned int timeout = DEFAULT_TIMEOUT; static int testmode = DEFAULT_TESTMODE; static bool nowayout = DEFAULT_NOWAYOUT; module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" __MODULE_STRING(DEFAULT_TIMEOUT)); module_param(testmode, int, 0); MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" __MODULE_STRING(DEFAULT_TESTMODE)); module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" __MODULE_STRING(WATCHDOG_NOWAYOUT)); /* Superio Chip */ static inline int superio_enter(void) { /* * Try to reserve REG and REG + 1 for exclusive access. */ if (!request_muxed_region(REG, 2, WATCHDOG_NAME)) return -EBUSY; outb(0x87, REG); outb(0x01, REG); outb(0x55, REG); outb(0x55, REG); return 0; } static inline void superio_exit(void) { outb(0x02, REG); outb(0x02, VAL); release_region(REG, 2); } static inline void superio_select(int ldn) { outb(LDNREG, REG); outb(ldn, VAL); } static inline int superio_inb(int reg) { outb(reg, REG); return inb(VAL); } static inline void superio_outb(int val, int reg) { outb(reg, REG); outb(val, VAL); } static inline int superio_inw(int reg) { int val; outb(reg++, REG); val = inb(VAL) << 8; outb(reg, REG); val |= inb(VAL); return val; } static inline void superio_outw(int val, int reg) { outb(reg++, REG); outb(val >> 8, VAL); outb(reg, REG); outb(val, VAL); } /* Internal function, should be called after superio_select(GPIO) */ static void _wdt_update_timeout(unsigned int t) { unsigned char cfg = WDT_KRST; if (testmode) cfg = 0; if (t <= max_units) cfg |= WDT_TOV1; else t /= 60; if (chip_type != IT8721_ID) cfg |= WDT_PWROK; superio_outb(cfg, WDTCFG); superio_outb(t, WDTVALLSB); if (max_units > 255) superio_outb(t >> 8, WDTVALMSB); } static int wdt_update_timeout(unsigned int t) { int ret; ret = superio_enter(); if (ret) return ret; superio_select(GPIO); _wdt_update_timeout(t); superio_exit(); return 0; } static int wdt_round_time(int t) { t += 59; t -= t % 60; return t; } /* watchdog timer handling */ static int wdt_start(struct watchdog_device *wdd) { return wdt_update_timeout(wdd->timeout); } static int wdt_stop(struct watchdog_device *wdd) { return wdt_update_timeout(0); } /** * wdt_set_timeout - set a new timeout value with watchdog ioctl * @t: timeout value in seconds * * The hardware device has a 8 or 16 bit watchdog timer (depends on * chip version) that can be configured to count seconds or minutes. * * Used within WDIOC_SETTIMEOUT watchdog device ioctl. */ static int wdt_set_timeout(struct watchdog_device *wdd, unsigned int t) { int ret = 0; if (t > max_units) t = wdt_round_time(t); wdd->timeout = t; if (watchdog_hw_running(wdd)) ret = wdt_update_timeout(t); return ret; } static const struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, .firmware_version = 1, .identity = WATCHDOG_NAME, }; static const struct watchdog_ops wdt_ops = { .owner = THIS_MODULE, .start = wdt_start, .stop = wdt_stop, .set_timeout = wdt_set_timeout, }; static struct watchdog_device wdt_dev = { .info = &ident, .ops = &wdt_ops, .min_timeout = 1, }; static int __init it87_wdt_init(void) { u8 chip_rev; int rc; rc = superio_enter(); if (rc) return rc; chip_type = superio_inw(CHIPID); chip_rev = superio_inb(CHIPREV) & 0x0f; superio_exit(); switch (chip_type) { case IT8702_ID: max_units = 255; break; case IT8712_ID: max_units = (chip_rev < 8) ? 255 : 65535; break; case IT8716_ID: case IT8726_ID: max_units = 65535; break; case IT8607_ID: case IT8620_ID: case IT8622_ID: case IT8625_ID: case IT8628_ID: case IT8655_ID: case IT8665_ID: case IT8686_ID: case IT8718_ID: case IT8720_ID: case IT8721_ID: case IT8728_ID: case IT8783_ID: max_units = 65535; break; case IT8705_ID: pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", chip_type, chip_rev); return -ENODEV; case NO_DEV_ID: pr_err("no device\n"); return -ENODEV; default: pr_err("Unknown Chip found, Chip %04x Revision %04x\n", chip_type, chip_rev); return -ENODEV; } rc = superio_enter(); if (rc) return rc; superio_select(GPIO); superio_outb(WDT_TOV1, WDTCFG); superio_outb(0x00, WDTCTRL); superio_exit(); if (timeout < 1 || timeout > max_units * 60) { timeout = DEFAULT_TIMEOUT; pr_warn("Timeout value out of range, use default %d sec\n", DEFAULT_TIMEOUT); } if (timeout > max_units) timeout = wdt_round_time(timeout); wdt_dev.timeout = timeout; wdt_dev.max_timeout = max_units * 60; watchdog_stop_on_reboot(&wdt_dev); rc = watchdog_register_device(&wdt_dev); if (rc) { pr_err("Cannot register watchdog device (err=%d)\n", rc); return rc; } pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", chip_type, chip_rev, timeout, nowayout, testmode); return 0; } static void __exit it87_wdt_exit(void) { watchdog_unregister_device(&wdt_dev); } module_init(it87_wdt_init); module_exit(it87_wdt_exit); MODULE_AUTHOR("Oliver Schuster"); MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O"); MODULE_LICENSE("GPL");