/****************************************************************************** * * Name: acmacros.h - C macros for the entire subsystem. * *****************************************************************************/ /* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #ifndef __ACMACROS_H__ #define __ACMACROS_H__ /* * Data manipulation macros */ #define ACPI_LOWORD(l) ((u16)(u32)(l)) #define ACPI_HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF)) #define ACPI_LOBYTE(l) ((u8)(u16)(l)) #define ACPI_HIBYTE(l) ((u8)((((u16)(l)) >> 8) & 0xFF)) #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) #if ACPI_MACHINE_WIDTH == 16 /* * For 16-bit addresses, we have to assume that the upper 32 bits * are zero. */ #define ACPI_LODWORD(l) ((u32)(l)) #define ACPI_HIDWORD(l) ((u32)(0)) #define ACPI_GET_ADDRESS(a) ((a).lo) #define ACPI_STORE_ADDRESS(a,b) {(a).hi=0;(a).lo=(u32)(b);} #define ACPI_VALID_ADDRESS(a) ((a).hi | (a).lo) #else #ifdef ACPI_NO_INTEGER64_SUPPORT /* * acpi_integer is 32-bits, no 64-bit support on this platform */ #define ACPI_LODWORD(l) ((u32)(l)) #define ACPI_HIDWORD(l) ((u32)(0)) #define ACPI_GET_ADDRESS(a) (a) #define ACPI_STORE_ADDRESS(a,b) ((a)=(b)) #define ACPI_VALID_ADDRESS(a) (a) #else /* * Full 64-bit address/integer on both 32-bit and 64-bit platforms */ #define ACPI_LODWORD(l) ((u32)(u64)(l)) #define ACPI_HIDWORD(l) ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi)) #define ACPI_GET_ADDRESS(a) (a) #define ACPI_STORE_ADDRESS(a,b) ((a)=(acpi_physical_address)(b)) #define ACPI_VALID_ADDRESS(a) (a) #endif #endif /* * printf() format helpers */ /* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */ #define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i),ACPI_LODWORD(i) /* * Extract a byte of data using a pointer. Any more than a byte and we * get into potential aligment issues -- see the STORE macros below */ #define ACPI_GET8(addr) (*(u8*)(addr)) /* Pointer arithmetic */ #define ACPI_PTR_ADD(t,a,b) (t *) (void *)((char *)(a) + (acpi_native_uint)(b)) #define ACPI_PTR_DIFF(a,b) (acpi_native_uint) ((char *)(a) - (char *)(b)) /* Pointer/Integer type conversions */ #define ACPI_TO_POINTER(i) ACPI_PTR_ADD (void, (void *) NULL,(acpi_native_uint)i) #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL) #define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL) #define ACPI_FADT_OFFSET(f) ACPI_OFFSET (FADT_DESCRIPTOR, f) #define ACPI_CAST_PTR(t, p) ((t *)(void *)(p)) #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **)(void *)(p)) #if ACPI_MACHINE_WIDTH == 16 #define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s) #define ACPI_PHYSADDR_TO_PTR(i) (void *)(i) #define ACPI_PTR_TO_PHYSADDR(i) (u32) (char *)(i) #else #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) #endif /* * Macros for moving data around to/from buffers that are possibly unaligned. * If the hardware supports the transfer of unaligned data, just do the store. * Otherwise, we have to move one byte at a time. */ #ifdef ACPI_BIG_ENDIAN /* * Macros for big-endian machines */ /* This macro sets a buffer index, starting from the end of the buffer */ #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran))) /* These macros reverse the bytes during the move, converting little-endian to big endian */ /* Big Endian <== Little Endian */ /* Hi...Lo Lo...Hi */ /* 16-bit source, 16/32/64 destination */ #define ACPI_MOVE_16_TO_16(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];} #define ACPI_MOVE_16_TO_32(d,s) {(*(u32 *)(void *)(d))=0;\ ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} #define ACPI_MOVE_16_TO_64(d,s) {(*(u64 *)(void *)(d))=0;\ ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} /* 32-bit source, 16/32/64 destination */ #define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_32_TO_32(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\ (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} #define ACPI_MOVE_32_TO_64(d,s) {(*(u64 *)(void *)(d))=0;\ ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} /* 64-bit source, 16/32/64 destination */ #define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ #define ACPI_MOVE_64_TO_64(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\ (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\ (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\ (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} #else /* * Macros for little-endian machines */ /* This macro sets a buffer index, starting from the beginning of the buffer */ #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset) #ifdef ACPI_MISALIGNED_TRANSFERS /* The hardware supports unaligned transfers, just do the little-endian move */ #if ACPI_MACHINE_WIDTH == 16 /* No 64-bit integers */ /* 16-bit source, 16/32/64 destination */ #define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) #define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s) #define ACPI_MOVE_16_TO_64(d,s) ACPI_MOVE_16_TO_32(d,s) /* 32-bit source, 16/32/64 destination */ #define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s) #define ACPI_MOVE_32_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s) /* 64-bit source, 16/32/64 destination */ #define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ #define ACPI_MOVE_64_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s) #else /* 16-bit source, 16/32/64 destination */ #define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) #define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s) #define ACPI_MOVE_16_TO_64(d,s) *(u64 *)(void *)(d) = *(u16 *)(void *)(s) /* 32-bit source, 16/32/64 destination */ #define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s) #define ACPI_MOVE_32_TO_64(d,s) *(u64 *)(void *)(d) = *(u32 *)(void *)(s) /* 64-bit source, 16/32/64 destination */ #define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ #define ACPI_MOVE_64_TO_64(d,s) *(u64 *)(void *)(d) = *(u64 *)(void *)(s) #endif #else /* * The hardware does not support unaligned transfers. We must move the * data one byte at a time. These macros work whether the source or * the destination (or both) is/are unaligned. (Little-endian move) */ /* 16-bit source, 16/32/64 destination */ #define ACPI_MOVE_16_TO_16(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];} #define ACPI_MOVE_16_TO_32(d,s) {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);} #define ACPI_MOVE_16_TO_64(d,s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);} /* 32-bit source, 16/32/64 destination */ #define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_32_TO_32(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];} #define ACPI_MOVE_32_TO_64(d,s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);} /* 64-bit source, 16/32/64 destination */ #define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */ #define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */ #define ACPI_MOVE_64_TO_64(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\ (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\ (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\ (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\ (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];} #endif #endif /* Macros based on machine integer width */ #if ACPI_MACHINE_WIDTH == 16 #define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) #elif ACPI_MACHINE_WIDTH == 32 #define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_32_TO_16(d,s) #elif ACPI_MACHINE_WIDTH == 64 #define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_64_TO_16(d,s) #else #error unknown ACPI_MACHINE_WIDTH #endif /* * Fast power-of-two math macros for non-optimized compilers */ #define _ACPI_DIV(value,power_of2) ((u32) ((value) >> (power_of2))) #define _ACPI_MUL(value,power_of2) ((u32) ((value) << (power_of2))) #define _ACPI_MOD(value,divisor) ((u32) ((value) & ((divisor) -1))) #define ACPI_DIV_2(a) _ACPI_DIV(a,1) #define ACPI_MUL_2(a) _ACPI_MUL(a,1) #define ACPI_MOD_2(a) _ACPI_MOD(a,2) #define ACPI_DIV_4(a) _ACPI_DIV(a,2) #define ACPI_MUL_4(a) _ACPI_MUL(a,2) #define ACPI_MOD_4(a) _ACPI_MOD(a,4) #define ACPI_DIV_8(a) _ACPI_DIV(a,3) #define ACPI_MUL_8(a) _ACPI_MUL(a,3) #define ACPI_MOD_8(a) _ACPI_MOD(a,8) #define ACPI_DIV_16(a) _ACPI_DIV(a,4) #define ACPI_MUL_16(a) _ACPI_MUL(a,4) #define ACPI_MOD_16(a) _ACPI_MOD(a,16) /* * Rounding macros (Power of two boundaries only) */ #define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & (~(((acpi_native_uint) boundary)-1))) #define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + (((acpi_native_uint) boundary)-1)) & (~(((acpi_native_uint) boundary)-1))) #define ACPI_ROUND_DOWN_TO_32_BITS(a) ACPI_ROUND_DOWN(a,4) #define ACPI_ROUND_DOWN_TO_64_BITS(a) ACPI_ROUND_DOWN(a,8) #define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,ALIGNED_ADDRESS_BOUNDARY) #define ACPI_ROUND_UP_to_32_bITS(a) ACPI_ROUND_UP(a,4) #define ACPI_ROUND_UP_to_64_bITS(a) ACPI_ROUND_UP(a,8) #define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,ALIGNED_ADDRESS_BOUNDARY) #define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7) #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a)) #define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10) /* Generic (non-power-of-two) rounding */ #define ACPI_ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary)) /* * Bitmask creation * Bit positions start at zero. * MASK_BITS_ABOVE creates a mask starting AT the position and above * MASK_BITS_BELOW creates a mask starting one bit BELOW the position */ #define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position)))) #define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position))) #define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7')) /* Bitfields within ACPI registers */ #define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask) #define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask) /* * An struct acpi_namespace_node * can appear in some contexts, * where a pointer to an union acpi_operand_object can also * appear. This macro is used to distinguish them. * * The "Descriptor" field is the first field in both structures. */ #define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->descriptor_id) #define ACPI_SET_DESCRIPTOR_TYPE(d,t) (((union acpi_descriptor *)(void *)(d))->descriptor_id = t) /* Macro to test the object type */ #define ACPI_GET_OBJECT_TYPE(d) (((union acpi_operand_object *)(void *)(d))->common.type) /* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */ #define ACPI_IS_SINGLE_TABLE(x) (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0) /* * Macros for the master AML opcode table */ #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT) #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags) {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type} #else #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags) {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type} #endif #ifdef ACPI_DISASSEMBLER #define ACPI_DISASM_ONLY_MEMBERS(a) a; #else #define ACPI_DISASM_ONLY_MEMBERS(a) #endif #define ARG_TYPE_WIDTH 5 #define ARG_1(x) ((u32)(x)) #define ARG_2(x) ((u32)(x) << (1 * ARG_TYPE_WIDTH)) #define ARG_3(x) ((u32)(x) << (2 * ARG_TYPE_WIDTH)) #define ARG_4(x) ((u32)(x) << (3 * ARG_TYPE_WIDTH)) #define ARG_5(x) ((u32)(x) << (4 * ARG_TYPE_WIDTH)) #define ARG_6(x) ((u32)(x) << (5 * ARG_TYPE_WIDTH)) #define ARGI_LIST1(a) (ARG_1(a)) #define ARGI_LIST2(a,b) (ARG_1(b)|ARG_2(a)) #define ARGI_LIST3(a,b,c) (ARG_1(c)|ARG_2(b)|ARG_3(a)) #define ARGI_LIST4(a,b,c,d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a)) #define ARGI_LIST5(a,b,c,d,e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a)) #define ARGI_LIST6(a,b,c,d,e,f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a)) #define ARGP_LIST1(a) (ARG_1(a)) #define ARGP_LIST2(a,b) (ARG_1(a)|ARG_2(b)) #define ARGP_LIST3(a,b,c) (ARG_1(a)|ARG_2(b)|ARG_3(c)) #define ARGP_LIST4(a,b,c,d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)) #define ARGP_LIST5(a,b,c,d,e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)) #define ARGP_LIST6(a,b,c,d,e,f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f)) #define GET_CURRENT_ARG_TYPE(list) (list & ((u32) 0x1F)) #define INCREMENT_ARG_LIST(list) (list >>= ((u32) ARG_TYPE_WIDTH)) /* * Reporting macros that are never compiled out */ #define ACPI_PARAM_LIST(pl) pl /* * Error reporting. These versions add callers module and line#. Since * _THIS_MODULE gets compiled out when ACPI_DEBUG_OUTPUT isn't defined, only * use it in debug mode. */ #ifdef ACPI_DEBUG_OUTPUT #define ACPI_REPORT_INFO(fp) {acpi_ut_report_info(_THIS_MODULE,__LINE__,_COMPONENT); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error(_THIS_MODULE,__LINE__,_COMPONENT); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning(_THIS_MODULE,__LINE__,_COMPONENT); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error(_THIS_MODULE,__LINE__,_COMPONENT, s, e); #define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error(_THIS_MODULE,__LINE__,_COMPONENT, s, n, p, e); #else #define ACPI_REPORT_INFO(fp) {acpi_ut_report_info("ACPI",__LINE__,_COMPONENT); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error("ACPI",__LINE__,_COMPONENT); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning("ACPI",__LINE__,_COMPONENT); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error("ACPI",__LINE__,_COMPONENT, s, e); #define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error("ACPI",__LINE__,_COMPONENT, s, n, p, e); #endif /* Error reporting. These versions pass thru the module and line# */ #define _ACPI_REPORT_INFO(a,b,c,fp) {acpi_ut_report_info(a,b,c); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define _ACPI_REPORT_ERROR(a,b,c,fp) {acpi_ut_report_error(a,b,c); \ acpi_os_printf ACPI_PARAM_LIST(fp);} #define _ACPI_REPORT_WARNING(a,b,c,fp) {acpi_ut_report_warning(a,b,c); \ acpi_os_printf ACPI_PARAM_LIST(fp);} /* * Debug macros that are conditionally compiled */ #ifdef ACPI_DEBUG_OUTPUT #define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_THIS_MODULE = name; /* * Function entry tracing. * The first parameter should be the procedure name as a quoted string. This is declared * as a local string ("_proc_name) so that it can be also used by the function exit macros below. */ #define ACPI_FUNCTION_NAME(a) struct acpi_debug_print_info _debug_info; \ _debug_info.component_id = _COMPONENT; \ _debug_info.proc_name = a; \ _debug_info.module_name = _THIS_MODULE; #define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \ acpi_ut_trace(__LINE__,&_debug_info) #define ACPI_FUNCTION_TRACE_PTR(a,b) ACPI_FUNCTION_NAME(a) \ acpi_ut_trace_ptr(__LINE__,&_debug_info,(void *)b) #define ACPI_FUNCTION_TRACE_U32(a,b) ACPI_FUNCTION_NAME(a) \ acpi_ut_trace_u32(__LINE__,&_debug_info,(u32)b) #define ACPI_FUNCTION_TRACE_STR(a,b) ACPI_FUNCTION_NAME(a) \ acpi_ut_trace_str(__LINE__,&_debug_info,(char *)b) #define ACPI_FUNCTION_ENTRY() acpi_ut_track_stack_ptr() /* * Function exit tracing. * WARNING: These macros include a return statement. This is usually considered * bad form, but having a separate exit macro is very ugly and difficult to maintain. * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros * so that "_proc_name" is defined. */ #ifdef ACPI_USE_DO_WHILE_0 #define ACPI_DO_WHILE0(a) do a while(0) #else #define ACPI_DO_WHILE0(a) a #endif #define return_VOID ACPI_DO_WHILE0 ({acpi_ut_exit(__LINE__,&_debug_info);return;}) #define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({acpi_ut_status_exit(__LINE__,&_debug_info,(s));return((s));}) #define return_VALUE(s) ACPI_DO_WHILE0 ({acpi_ut_value_exit(__LINE__,&_debug_info,(acpi_integer)(s));return((s));}) #define return_PTR(s) ACPI_DO_WHILE0 ({acpi_ut_ptr_exit(__LINE__,&_debug_info,(u8 *)(s));return((s));}) /* Conditional execution */ #define ACPI_DEBUG_EXEC(a) a #define ACPI_NORMAL_EXEC(a) #define ACPI_DEBUG_DEFINE(a) a; #define ACPI_DEBUG_ONLY_MEMBERS(a) a; #define _VERBOSE_STRUCTURES /* Stack and buffer dumping */ #define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a),0) #define ACPI_DUMP_OPERANDS(a,b,c,d,e) acpi_ex_dump_operands(a,b,c,d,e,_THIS_MODULE,__LINE__) #define ACPI_DUMP_ENTRY(a,b) acpi_ns_dump_entry (a,b) #ifdef ACPI_FUTURE_USAGE #define ACPI_DUMP_TABLES(a,b) acpi_ns_dump_tables(a,b) #endif #define ACPI_DUMP_PATHNAME(a,b,c,d) acpi_ns_dump_pathname(a,b,c,d) #define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a) #define ACPI_DUMP_BUFFER(a,b) acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT) #define ACPI_BREAK_MSG(a) acpi_os_signal (ACPI_SIGNAL_BREAKPOINT,(a)) /* * Generate INT3 on ACPI_ERROR (Debug only!) */ #define ACPI_ERROR_BREAK #ifdef ACPI_ERROR_BREAK #define ACPI_BREAK_ON_ERROR(lvl) if ((lvl)&ACPI_ERROR) \ acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n") #else #define ACPI_BREAK_ON_ERROR(lvl) #endif /* * Master debug print macros * Print iff: * 1) Debug print for the current component is enabled * 2) Debug error level or trace level for the print statement is enabled */ #define ACPI_DEBUG_PRINT(pl) acpi_ut_debug_print ACPI_PARAM_LIST(pl) #define ACPI_DEBUG_PRINT_RAW(pl) acpi_ut_debug_print_raw ACPI_PARAM_LIST(pl) #else /* * This is the non-debug case -- make everything go away, * leaving no executable debug code! */ #define ACPI_MODULE_NAME(name) #define _THIS_MODULE "" #define ACPI_DEBUG_EXEC(a) #define ACPI_NORMAL_EXEC(a) a; #define ACPI_DEBUG_DEFINE(a) #define ACPI_DEBUG_ONLY_MEMBERS(a) #define ACPI_FUNCTION_NAME(a) #define ACPI_FUNCTION_TRACE(a) #define ACPI_FUNCTION_TRACE_PTR(a,b) #define ACPI_FUNCTION_TRACE_U32(a,b) #define ACPI_FUNCTION_TRACE_STR(a,b) #define ACPI_FUNCTION_EXIT #define ACPI_FUNCTION_STATUS_EXIT(s) #define ACPI_FUNCTION_VALUE_EXIT(s) #define ACPI_FUNCTION_ENTRY() #define ACPI_DUMP_STACK_ENTRY(a) #define ACPI_DUMP_OPERANDS(a,b,c,d,e) #define ACPI_DUMP_ENTRY(a,b) #ifdef ACPI_FUTURE_USAGE #define ACPI_DUMP_TABLES(a,b) #endif #define ACPI_DUMP_PATHNAME(a,b,c,d) #define ACPI_DUMP_RESOURCE_LIST(a) #define ACPI_DUMP_BUFFER(a,b) #define ACPI_DEBUG_PRINT(pl) #define ACPI_DEBUG_PRINT_RAW(pl) #define ACPI_BREAK_MSG(a) #define return_VOID return #define return_ACPI_STATUS(s) return(s) #define return_VALUE(s) return(s) #define return_PTR(s) return(s) #endif /* * Some code only gets executed when the debugger is built in. * Note that this is entirely independent of whether the * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not. */ #ifdef ACPI_DEBUGGER #define ACPI_DEBUGGER_EXEC(a) a #else #define ACPI_DEBUGGER_EXEC(a) #endif /* * For 16-bit code, we want to shrink some things even though * we are using ACPI_DEBUG_OUTPUT to get the debug output */ #if ACPI_MACHINE_WIDTH == 16 #undef ACPI_DEBUG_ONLY_MEMBERS #undef _VERBOSE_STRUCTURES #define ACPI_DEBUG_ONLY_MEMBERS(a) #endif #ifdef ACPI_DEBUG_OUTPUT /* * 1) Set name to blanks * 2) Copy the object name */ #define ACPI_ADD_OBJECT_NAME(a,b) ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\ ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name)) #else #define ACPI_ADD_OBJECT_NAME(a,b) #endif /* * Memory allocation tracking (DEBUG ONLY) */ #ifndef ACPI_DBG_TRACK_ALLOCATIONS /* Memory allocation */ #define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a),_COMPONENT,_THIS_MODULE,__LINE__) #define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate((acpi_size)(a), _COMPONENT,_THIS_MODULE,__LINE__) #define ACPI_MEM_FREE(a) acpi_os_free(a) #define ACPI_MEM_TRACKING(a) #else /* Memory allocation */ #define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_THIS_MODULE,__LINE__) #define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate_and_track((acpi_size)(a), _COMPONENT,_THIS_MODULE,__LINE__) #define ACPI_MEM_FREE(a) acpi_ut_free_and_track(a,_COMPONENT,_THIS_MODULE,__LINE__) #define ACPI_MEM_TRACKING(a) a #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ #endif /* ACMACROS_H */