#ifndef _M32104UT_M32104UT_PLD_H #define _M32104UT_M32104UT_PLD_H /* * include/asm-m32r/m32104ut/m32104ut_pld.h * * Definitions for Programable Logic Device(PLD) on M32104UT board. * Based on m32700ut_pld.h * * Copyright (c) 2002 Takeo Takahashi * Copyright (c) 2005 Naoto Sugai * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of * this archive for more details. */ #if defined(CONFIG_PLAT_M32104UT) #define PLD_PLAT_BASE 0x02c00000 #else #error "no platform configuration" #endif #ifndef __ASSEMBLY__ /* * C functions use non-cache address. */ #define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) #define __reg8 (volatile unsigned char *) #define __reg16 (volatile unsigned short *) #define __reg32 (volatile unsigned int *) #else #define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) #define __reg8 #define __reg16 #define __reg32 #endif /* __ASSEMBLY__ */ /* CFC */ #define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) #define PLD_CFSTS __reg16(PLD_BASE + 0x0002) #define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) #define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) /* MMC */ #define PLD_MMCCR __reg16(PLD_BASE + 0x4000) #define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) #define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) #define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) #define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) #define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) #define PLD_MMCDET __reg16(PLD_BASE + 0x4010) #define PLD_MMCWP __reg16(PLD_BASE + 0x4012) #define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) #define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) #define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) #define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) /* ICU * ICUISTS: status register * ICUIREQ0: request register * ICUIREQ1: request register * ICUCR3: control register for CFIREQ# interrupt * ICUCR4: control register for CFC Card insert interrupt * ICUCR5: control register for CFC Card eject interrupt * ICUCR6: control register for external interrupt * ICUCR11: control register for MMC Card insert/eject interrupt * ICUCR13: control register for SC error interrupt * ICUCR14: control register for SC receive interrupt * ICUCR15: control register for SC send interrupt */ #define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */ #define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */ #define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */ #define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */ #define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */ #define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ #define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */ #define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */ #define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */ #define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) #define PLD_ICUISTS_VECB_MASK (0xf000) #define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) #define PLD_ICUISTS_ISN_MASK (0x07c0) #define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) #define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) #define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) #define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) #define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) #define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) #define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) #define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) #define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) #define PLD_ICUCR_IEN (0x1000) #define PLD_ICUCR_IREQ (0x0100) #define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ #define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ #define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ #define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ #define PLD_ICUCR_ILEVEL0 (0x0000) #define PLD_ICUCR_ILEVEL1 (0x0001) #define PLD_ICUCR_ILEVEL2 (0x0002) #define PLD_ICUCR_ILEVEL3 (0x0003) #define PLD_ICUCR_ILEVEL4 (0x0004) #define PLD_ICUCR_ILEVEL5 (0x0005) #define PLD_ICUCR_ILEVEL6 (0x0006) #define PLD_ICUCR_ILEVEL7 (0x0007) /* Power Control of MMC and CF */ #define PLD_CPCR __reg16(PLD_BASE + 0x14000) #define PLD_CPCR_CDP 0x0001 /* LED Control * * 1: DIP swich side * 2: Reset switch side */ #define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) #define PLD_IOLED_1_ON 0x001 #define PLD_IOLED_1_OFF 0x000 #define PLD_IOLED_2_ON 0x002 #define PLD_IOLED_2_OFF 0x000 /* DIP Switch * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) * 1: - * 2: - * 3: - */ #define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) #define PLD_IOSWSTS_IOSW2 0x0200 #define PLD_IOSWSTS_IOSW1 0x0100 #define PLD_IOSWSTS_IOWP0 0x0001 /* CRC */ #define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) #define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) #define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) #define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) #define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) #define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) /* RTC */ #define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) #define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) #define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) #define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) #define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) /* SIM Card */ #define PLD_SCCR __reg16(PLD_BASE + 0x38000) #define PLD_SCMOD __reg16(PLD_BASE + 0x38004) #define PLD_SCSTS __reg16(PLD_BASE + 0x38006) #define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) #define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) #define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) #define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) #endif /* _M32104UT_M32104UT_PLD_H */