/* $Id: sbus.h,v 1.22 2000/02/18 13:50:50 davem Exp $ * sbus.h: Defines for the Sun SBus. * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) */ #ifndef _SPARC_SBUS_H #define _SPARC_SBUS_H #include #include #include #include #include #include /* We scan which devices are on the SBus using the PROM node device * tree. SBus devices are described in two different ways. You can * either get an absolute address at which to access the device, or * you can get a SBus 'slot' number and an offset within that slot. */ /* The base address at which to calculate device OBIO addresses. */ #define SUN_SBUS_BVADDR 0xf8000000 #define SBUS_OFF_MASK 0x01ffffff /* These routines are used to calculate device address from slot * numbers + offsets, and vice versa. */ static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) { return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset)); } static inline int sbus_dev_slot(unsigned long dev_addr) { return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25); } struct sbus_bus; /* Linux SBUS device tables */ struct sbus_dev { struct of_device ofdev; struct sbus_bus *bus; struct sbus_dev *next; struct sbus_dev *child; struct sbus_dev *parent; int prom_node; char prom_name[64]; int slot; struct resource resource[PROMREG_MAX]; struct linux_prom_registers reg_addrs[PROMREG_MAX]; int num_registers; struct linux_prom_ranges device_ranges[PROMREG_MAX]; int num_device_ranges; unsigned int irqs[4]; int num_irqs; }; #define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) /* This struct describes the SBus(s) found on this machine. */ struct sbus_bus { struct of_device ofdev; void *iommu; /* Opaque IOMMU cookie */ struct sbus_dev *devices; /* Link to devices on this SBus */ struct sbus_bus *next; /* next SBus, if more than one SBus */ int prom_node; /* PROM device tree node for this SBus */ char prom_name[64]; /* Usually "sbus" or "sbi" */ int clock_freq; struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; int num_sbus_ranges; int devid; int board; }; #define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) extern struct sbus_bus *sbus_root; static inline int sbus_is_slave(struct sbus_dev *dev) { /* XXX Have to write this for sun4c's */ return 0; } /* Device probing routines could find these handy */ #define for_each_sbus(bus) \ for((bus) = sbus_root; (bus); (bus)=(bus)->next) #define for_each_sbusdev(device, bus) \ for((device) = (bus)->devices; (device); (device)=(device)->next) #define for_all_sbusdev(device, bus) \ for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ for ((device) = (bus)->devices; (device); (device) = (device)->next) /* Driver DVMA interfaces. */ #define sbus_can_dma_64bit(sdev) (0) /* actually, sparc_cpu_model==sun4d */ #define sbus_can_burst64(sdev) (0) /* actually, sparc_cpu_model==sun4d */ extern void sbus_set_sbus64(struct sbus_dev *, int); extern void sbus_fill_device_irq(struct sbus_dev *); /* These yield IOMMU mappings in consistent mode. */ extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp); extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32); void prom_adjust_ranges(struct linux_prom_ranges *, int, struct linux_prom_ranges *, int); #define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL #define SBUS_DMA_TODEVICE DMA_TO_DEVICE #define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE #define SBUS_DMA_NONE DMA_NONE /* All the rest use streaming mode mappings. */ extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int); extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int); extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int); extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int); /* Finally, allow explicit synchronization of streamable mappings. */ extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int); #define sbus_dma_sync_single sbus_dma_sync_single_for_cpu extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int); extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int); #define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int); /* Eric Brower (ebrower@usa.net) * Translate SBus interrupt levels to ino values-- * this is used when converting sbus "interrupts" OBP * node values to "intr" node values, and is platform * dependent. If only we could call OBP with * "sbus-intr>cpu (sbint -- ino)" from kernel... * See .../drivers/sbus/sbus.c for details. */ BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int) #define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint) extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); extern int sbus_arch_preinit(void); extern void sbus_arch_postinit(void); #endif /* !(_SPARC_SBUS_H) */