/* linux/include/linux/clocksource.h * * This file contains the structure definitions for clocksources. * * If you are not a clocksource, or timekeeping code, you should * not be including this file! */ #ifndef _LINUX_CLOCKSOURCE_H #define _LINUX_CLOCKSOURCE_H #include #include #include #include #include #include #include #include /* clocksource cycle base type */ typedef u64 cycle_t; struct clocksource; /** * struct clocksource - hardware abstraction for a free running counter * Provides mostly state-free accessors to the underlying hardware. * * @name: ptr to clocksource name * @list: list head for registration * @rating: rating value for selection (higher is better) * To avoid rating inflation the following * list should give you a guide as to how * to assign your clocksource a rating * 1-99: Unfit for real use * Only available for bootup and testing purposes. * 100-199: Base level usability. * Functional for real use, but not desired. * 200-299: Good. * A correct and usable clocksource. * 300-399: Desired. * A reasonably fast and accurate clocksource. * 400-499: Perfect * The ideal clocksource. A must-use where * available. * @read: returns a cycle value * @mask: bitmask for two's complement * subtraction of non 64 bit counters * @mult: cycle to nanosecond multiplier (adjusted by NTP) * @mult_orig: cycle to nanosecond multiplier (unadjusted by NTP) * @shift: cycle to nanosecond divisor (power of two) * @flags: flags describing special properties * @vread: vsyscall based read * @resume: resume function for the clocksource, if necessary * @cycle_interval: Used internally by timekeeping core, please ignore. * @xtime_interval: Used internally by timekeeping core, please ignore. */ struct clocksource { /* * First part of structure is read mostly */ char *name; struct list_head list; int rating; cycle_t (*read)(void); cycle_t mask; u32 mult; u32 mult_orig; u32 shift; unsigned long flags; cycle_t (*vread)(void); void (*resume)(void); #ifdef CONFIG_IA64 void *fsys_mmio; /* used by fsyscall asm code */ #define CLKSRC_FSYS_MMIO_SET(mmio, addr) ((mmio) = (addr)) #else #define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0) #endif /* timekeeping specific data, ignore */ cycle_t cycle_interval; u64 xtime_interval; u32 raw_interval; /* * Second part is written at each timer interrupt * Keep it in a different cache line to dirty no * more than one cache line. */ cycle_t cycle_last ____cacheline_aligned_in_smp; u64 xtime_nsec; s64 error; struct timespec raw_time; #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ struct list_head wd_list; cycle_t wd_last; #endif }; extern struct clocksource *clock; /* current clocksource */ /* * Clock source flags bits:: */ #define CLOCK_SOURCE_IS_CONTINUOUS 0x01 #define CLOCK_SOURCE_MUST_VERIFY 0x02 #define CLOCK_SOURCE_WATCHDOG 0x10 #define CLOCK_SOURCE_VALID_FOR_HRES 0x20 /* simplify initialization of mask field */ #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1) /** * clocksource_khz2mult - calculates mult from khz and shift * @khz: Clocksource frequency in KHz * @shift_constant: Clocksource shift factor * * Helper functions that converts a khz counter frequency to a timsource * multiplier, given the clocksource shift value */ static inline u32 clocksource_khz2mult(u32 khz, u32 shift_constant) { /* khz = cyc/(Million ns) * mult/2^shift = ns/cyc * mult = ns/cyc * 2^shift * mult = 1Million/khz * 2^shift * mult = 1000000 * 2^shift / khz * mult = (1000000<read(); } /** * cyc2ns - converts clocksource cycles to nanoseconds * @cs: Pointer to clocksource * @cycles: Cycles * * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds. * * XXX - This could use some mult_lxl_ll() asm optimization */ static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles) { u64 ret = (u64)cycles; ret = (ret * cs->mult) >> cs->shift; return ret; } /** * clocksource_calculate_interval - Calculates a clocksource interval struct * * @c: Pointer to clocksource. * @length_nsec: Desired interval length in nanoseconds. * * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment * pair and interval request. * * Unless you're the timekeeping code, you should not be using this! */ static inline void clocksource_calculate_interval(struct clocksource *c, unsigned long length_nsec) { u64 tmp; /* Do the ns -> cycle conversion first, using original mult */ tmp = length_nsec; tmp <<= c->shift; tmp += c->mult_orig/2; do_div(tmp, c->mult_orig); c->cycle_interval = (cycle_t)tmp; if (c->cycle_interval == 0) c->cycle_interval = 1; /* Go back from cycles -> shifted ns, this time use ntp adjused mult */ c->xtime_interval = (u64)c->cycle_interval * c->mult; c->raw_interval = ((u64)c->cycle_interval * c->mult_orig) >> c->shift; } /* used to install a new clocksource */ extern int clocksource_register(struct clocksource*); extern void clocksource_unregister(struct clocksource*); extern void clocksource_touch_watchdog(void); extern struct clocksource* clocksource_get_next(void); extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_resume(void); #ifdef CONFIG_GENERIC_TIME_VSYSCALL extern void update_vsyscall(struct timespec *ts, struct clocksource *c); extern void update_vsyscall_tz(void); #else static inline void update_vsyscall(struct timespec *ts, struct clocksource *c) { } static inline void update_vsyscall_tz(void) { } #endif #endif /* _LINUX_CLOCKSOURCE_H */