/* SPDX-License-Identifier: GPL-2.0-only */ /* * devfreq: Generic Dynamic Voltage and Frequency Scaling (DVFS) Framework * for Non-CPU Devices. * * Copyright (C) 2011 Samsung Electronics * MyungJoo Ham */ #ifndef __LINUX_DEVFREQ_H__ #define __LINUX_DEVFREQ_H__ #include #include #include #define DEVFREQ_NAME_LEN 16 /* DEVFREQ governor name */ #define DEVFREQ_GOV_SIMPLE_ONDEMAND "simple_ondemand" #define DEVFREQ_GOV_PERFORMANCE "performance" #define DEVFREQ_GOV_POWERSAVE "powersave" #define DEVFREQ_GOV_USERSPACE "userspace" #define DEVFREQ_GOV_PASSIVE "passive" /* DEVFREQ notifier interface */ #define DEVFREQ_TRANSITION_NOTIFIER (0) /* Transition notifiers of DEVFREQ_TRANSITION_NOTIFIER */ #define DEVFREQ_PRECHANGE (0) #define DEVFREQ_POSTCHANGE (1) struct devfreq; struct devfreq_governor; /** * struct devfreq_dev_status - Data given from devfreq user device to * governors. Represents the performance * statistics. * @total_time: The total time represented by this instance of * devfreq_dev_status * @busy_time: The time that the device was working among the * total_time. * @current_frequency: The operating frequency. * @private_data: An entry not specified by the devfreq framework. * A device and a specific governor may have their * own protocol with private_data. However, because * this is governor-specific, a governor using this * will be only compatible with devices aware of it. */ struct devfreq_dev_status { /* both since the last measure */ unsigned long total_time; unsigned long busy_time; unsigned long current_frequency; void *private_data; }; /* * The resulting frequency should be at most this. (this bound is the * least upper bound; thus, the resulting freq should be lower or same) * If the flag is not set, the resulting frequency should be at most the * bound (greatest lower bound) */ #define DEVFREQ_FLAG_LEAST_UPPER_BOUND 0x1 /** * struct devfreq_dev_profile - Devfreq's user device profile * @initial_freq: The operating frequency when devfreq_add_device() is * called. * @polling_ms: The polling interval in ms. 0 disables polling. * @target: The device should set its operating frequency at * freq or lowest-upper-than-freq value. If freq is * higher than any operable frequency, set maximum. * Before returning, target function should set * freq at the current frequency. * The "flags" parameter's possible values are * explained above with "DEVFREQ_FLAG_*" macros. * @get_dev_status: The device should provide the current performance * status to devfreq. Governors are recommended not to * use this directly. Instead, governors are recommended * to use devfreq_update_stats() along with * devfreq.last_status. * @get_cur_freq: The device should provide the current frequency * at which it is operating. * @exit: An optional callback that is called when devfreq * is removing the devfreq object due to error or * from devfreq_remove_device() call. If the user * has registered devfreq->nb at a notifier-head, * this is the time to unregister it. * @freq_table: Optional list of frequencies to support statistics * and freq_table must be generated in ascending order. * @max_state: The size of freq_table. */ struct devfreq_dev_profile { unsigned long initial_freq; unsigned int polling_ms; int (*target)(struct device *dev, unsigned long *freq, u32 flags); int (*get_dev_status)(struct device *dev, struct devfreq_dev_status *stat); int (*get_cur_freq)(struct device *dev, unsigned long *freq); void (*exit)(struct device *dev); unsigned long *freq_table; unsigned int max_state; }; /** * struct devfreq - Device devfreq structure * @node: list node - contains the devices with devfreq that have been * registered. * @lock: a mutex to protect accessing devfreq. * @dev: device registered by devfreq class. dev.parent is the device * using devfreq. * @profile: device-specific devfreq profile * @governor: method how to choose frequency based on the usage. * @governor_name: devfreq governor name for use with this devfreq * @nb: notifier block used to notify devfreq object that it should * reevaluate operable frequencies. Devfreq users may use * devfreq.nb to the corresponding register notifier call chain. * @work: delayed work for load monitoring. * @previous_freq: previously configured frequency value. * @data: Private data of the governor. The devfreq framework does not * touch this. * @min_freq: Limit minimum frequency requested by user (0: none) * @max_freq: Limit maximum frequency requested by user (0: none) * @scaling_min_freq: Limit minimum frequency requested by OPP interface * @scaling_max_freq: Limit maximum frequency requested by OPP interface * @stop_polling: devfreq polling status of a device. * @suspend_freq: frequency of a device set during suspend phase. * @resume_freq: frequency of a device set in resume phase. * @suspend_count: suspend requests counter for a device. * @total_trans: Number of devfreq transitions * @trans_table: Statistics of devfreq transitions * @time_in_state: Statistics of devfreq states * @last_stat_updated: The last time stat updated * @transition_notifier_list: list head of DEVFREQ_TRANSITION_NOTIFIER notifier * * This structure stores the devfreq information for a give device. * * Note that when a governor accesses entries in struct devfreq in its * functions except for the context of callbacks defined in struct * devfreq_governor, the governor should protect its access with the * struct mutex lock in struct devfreq. A governor may use this mutex * to protect its own private data in void *data as well. */ struct devfreq { struct list_head node; struct mutex lock; struct device dev; struct devfreq_dev_profile *profile; const struct devfreq_governor *governor; char governor_name[DEVFREQ_NAME_LEN]; struct notifier_block nb; struct delayed_work work; unsigned long previous_freq; struct devfreq_dev_status last_status; void *data; /* private data for governors */ unsigned long min_freq; unsigned long max_freq; unsigned long scaling_min_freq; unsigned long scaling_max_freq; bool stop_polling; unsigned long suspend_freq; unsigned long resume_freq; atomic_t suspend_count; /* information for device frequency transition */ unsigned int total_trans; unsigned int *trans_table; unsigned long *time_in_state; unsigned long last_stat_updated; struct srcu_notifier_head transition_notifier_list; }; struct devfreq_freqs { unsigned long old; unsigned long new; }; #if defined(CONFIG_PM_DEVFREQ) extern struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, const char *governor_name, void *data); extern int devfreq_remove_device(struct devfreq *devfreq); extern struct devfreq *devm_devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, const char *governor_name, void *data); extern void devm_devfreq_remove_device(struct device *dev, struct devfreq *devfreq); /* Supposed to be called by PM callbacks */ extern int devfreq_suspend_device(struct devfreq *devfreq); extern int devfreq_resume_device(struct devfreq *devfreq); extern void devfreq_suspend(void); extern void devfreq_resume(void); /** * update_devfreq() - Reevaluate the device and configure frequency * @devfreq: the devfreq device * * Note: devfreq->lock must be held */ extern int update_devfreq(struct devfreq *devfreq); /* Helper functions for devfreq user device driver with OPP. */ extern struct dev_pm_opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags); extern int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq); extern int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq); extern int devm_devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq); extern void devm_devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq); extern int devfreq_register_notifier(struct devfreq *devfreq, struct notifier_block *nb, unsigned int list); extern int devfreq_unregister_notifier(struct devfreq *devfreq, struct notifier_block *nb, unsigned int list); extern int devm_devfreq_register_notifier(struct device *dev, struct devfreq *devfreq, struct notifier_block *nb, unsigned int list); extern void devm_devfreq_unregister_notifier(struct device *dev, struct devfreq *devfreq, struct notifier_block *nb, unsigned int list); extern struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index); #if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) /** * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq * and devfreq_add_device * @upthreshold: If the load is over this value, the frequency jumps. * Specify 0 to use the default. Valid value = 0 to 100. * @downdifferential: If the load is under upthreshold - downdifferential, * the governor may consider slowing the frequency down. * Specify 0 to use the default. Valid value = 0 to 100. * downdifferential < upthreshold must hold. * * If the fed devfreq_simple_ondemand_data pointer is NULL to the governor, * the governor uses the default values. */ struct devfreq_simple_ondemand_data { unsigned int upthreshold; unsigned int downdifferential; }; #endif #if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) /** * struct devfreq_passive_data - void *data fed to struct devfreq * and devfreq_add_device * @parent: the devfreq instance of parent device. * @get_target_freq: Optional callback, Returns desired operating frequency * for the device using passive governor. That is called * when passive governor should decide the next frequency * by using the new frequency of parent devfreq device * using governors except for passive governor. * If the devfreq device has the specific method to decide * the next frequency, should use this callback. * @this: the devfreq instance of own device. * @nb: the notifier block for DEVFREQ_TRANSITION_NOTIFIER list * * The devfreq_passive_data have to set the devfreq instance of parent * device with governors except for the passive governor. But, don't need to * initialize the 'this' and 'nb' field because the devfreq core will handle * them. */ struct devfreq_passive_data { /* Should set the devfreq instance of parent device */ struct devfreq *parent; /* Optional callback to decide the next frequency of passvice device */ int (*get_target_freq)(struct devfreq *this, unsigned long *freq); /* For passive governor's internal use. Don't need to set them */ struct devfreq *this; struct notifier_block nb; }; #endif #else /* !CONFIG_PM_DEVFREQ */ static inline struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, const char *governor_name, void *data) { return ERR_PTR(-ENOSYS); } static inline int devfreq_remove_device(struct devfreq *devfreq) { return 0; } static inline struct devfreq *devm_devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, const char *governor_name, void *data) { return ERR_PTR(-ENOSYS); } static inline void devm_devfreq_remove_device(struct device *dev, struct devfreq *devfreq) { } static inline int devfreq_suspend_device(struct devfreq *devfreq) { return 0; } static inline int devfreq_resume_device(struct devfreq *devfreq) { return 0; } static inline void devfreq_suspend(void) {} static inline void devfreq_resume(void) {} static inline struct dev_pm_opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { return ERR_PTR(-EINVAL); } static inline int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq) { return -EINVAL; } static inline int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq) { return -EINVAL; } static inline int devm_devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq) { return -EINVAL; } static inline void devm_devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq) { } static inline int devfreq_register_notifier(struct devfreq *devfreq, struct notifier_block *nb, unsigned int list) { return 0; } static inline int devfreq_unregister_notifier(struct devfreq *devfreq, struct notifier_block *nb, unsigned int list) { return 0; } static inline int devm_devfreq_register_notifier(struct device *dev, struct devfreq *devfreq, struct notifier_block *nb, unsigned int list) { return 0; } static inline void devm_devfreq_unregister_notifier(struct device *dev, struct devfreq *devfreq, struct notifier_block *nb, unsigned int list) { } static inline struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index) { return ERR_PTR(-ENODEV); } static inline int devfreq_update_stats(struct devfreq *df) { return -EINVAL; } #endif /* CONFIG_PM_DEVFREQ */ #endif /* __LINUX_DEVFREQ_H__ */