/* SPDX-License-Identifier: GPL-2.0-only */ /* * Fence mechanism for dma-buf to allow for asynchronous dma access * * Copyright (C) 2012 Canonical Ltd * Copyright (C) 2012 Texas Instruments * * Authors: * Rob Clark * Maarten Lankhorst */ #ifndef __LINUX_DMA_FENCE_H #define __LINUX_DMA_FENCE_H #include #include #include #include #include #include #include #include struct dma_fence; struct dma_fence_ops; struct dma_fence_cb; /** * struct dma_fence - software synchronization primitive * @refcount: refcount for this fence * @ops: dma_fence_ops associated with this fence * @rcu: used for releasing fence with kfree_rcu * @cb_list: list of all callbacks to call * @lock: spin_lock_irqsave used for locking * @context: execution context this fence belongs to, returned by * dma_fence_context_alloc() * @seqno: the sequence number of this fence inside the execution context, * can be compared to decide which fence would be signaled later. * @flags: A mask of DMA_FENCE_FLAG_* defined below * @timestamp: Timestamp when the fence was signaled. * @error: Optional, only valid if < 0, must be set before calling * dma_fence_signal, indicates that the fence has completed with an error. * * the flags member must be manipulated and read using the appropriate * atomic ops (bit_*), so taking the spinlock will not be needed most * of the time. * * DMA_FENCE_FLAG_SIGNALED_BIT - fence is already signaled * DMA_FENCE_FLAG_TIMESTAMP_BIT - timestamp recorded for fence signaling * DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT - enable_signaling might have been called * DMA_FENCE_FLAG_USER_BITS - start of the unused bits, can be used by the * implementer of the fence for its own purposes. Can be used in different * ways by different fence implementers, so do not rely on this. * * Since atomic bitops are used, this is not guaranteed to be the case. * Particularly, if the bit was set, but dma_fence_signal was called right * before this bit was set, it would have been able to set the * DMA_FENCE_FLAG_SIGNALED_BIT, before enable_signaling was called. * Adding a check for DMA_FENCE_FLAG_SIGNALED_BIT after setting * DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT closes this race, and makes sure that * after dma_fence_signal was called, any enable_signaling call will have either * been completed, or never called at all. */ struct dma_fence { spinlock_t *lock; const struct dma_fence_ops *ops; /* * We clear the callback list on kref_put so that by the time we * release the fence it is unused. No one should be adding to the * cb_list that they don't themselves hold a reference for. * * The lifetime of the timestamp is similarly tied to both the * rcu freelist and the cb_list. The timestamp is only set upon * signaling while simultaneously notifying the cb_list. Ergo, we * only use either the cb_list of timestamp. Upon destruction, * neither are accessible, and so we can use the rcu. This means * that the cb_list is *only* valid until the signal bit is set, * and to read either you *must* hold a reference to the fence, * and not just the rcu_read_lock. * * Listed in chronological order. */ union { struct list_head cb_list; /* @cb_list replaced by @timestamp on dma_fence_signal() */ ktime_t timestamp; /* @timestamp replaced by @rcu on dma_fence_release() */ struct rcu_head rcu; }; u64 context; u64 seqno; unsigned long flags; struct kref refcount; int error; }; enum dma_fence_flag_bits { DMA_FENCE_FLAG_SIGNALED_BIT, DMA_FENCE_FLAG_TIMESTAMP_BIT, DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT, DMA_FENCE_FLAG_USER_BITS, /* must always be last member */ }; typedef void (*dma_fence_func_t)(struct dma_fence *fence, struct dma_fence_cb *cb); /** * struct dma_fence_cb - callback for dma_fence_add_callback() * @node: used by dma_fence_add_callback() to append this struct to fence::cb_list * @func: dma_fence_func_t to call * * This struct will be initialized by dma_fence_add_callback(), additional * data can be passed along by embedding dma_fence_cb in another struct. */ struct dma_fence_cb { struct list_head node; dma_fence_func_t func; }; /** * struct dma_fence_ops - operations implemented for fence * */ struct dma_fence_ops { /** * @use_64bit_seqno: * * True if this dma_fence implementation uses 64bit seqno, false * otherwise. */ bool use_64bit_seqno; /** * @get_driver_name: * * Returns the driver name. This is a callback to allow drivers to * compute the name at runtime, without having it to store permanently * for each fence, or build a cache of some sort. * * This callback is mandatory. */ const char * (*get_driver_name)(struct dma_fence *fence); /** * @get_timeline_name: * * Return the name of the context this fence belongs to. This is a * callback to allow drivers to compute the name at runtime, without * having it to store permanently for each fence, or build a cache of * some sort. * * This callback is mandatory. */ const char * (*get_timeline_name)(struct dma_fence *fence); /** * @enable_signaling: * * Enable software signaling of fence. * * For fence implementations that have the capability for hw->hw * signaling, they can implement this op to enable the necessary * interrupts, or insert commands into cmdstream, etc, to avoid these * costly operations for the common case where only hw->hw * synchronization is required. This is called in the first * dma_fence_wait() or dma_fence_add_callback() path to let the fence * implementation know that there is another driver waiting on the * signal (ie. hw->sw case). * * This function can be called from atomic context, but not * from irq context, so normal spinlocks can be used. * * A return value of false indicates the fence already passed, * or some failure occurred that made it impossible to enable * signaling. True indicates successful enabling. * * &dma_fence.error may be set in enable_signaling, but only when false * is returned. * * Since many implementations can call dma_fence_signal() even when before * @enable_signaling has been called there's a race window, where the * dma_fence_signal() might result in the final fence reference being * released and its memory freed. To avoid this, implementations of this * callback should grab their own reference using dma_fence_get(), to be * released when the fence is signalled (through e.g. the interrupt * handler). * * This callback is optional. If this callback is not present, then the * driver must always have signaling enabled. */ bool (*enable_signaling)(struct dma_fence *fence); /** * @signaled: * * Peek whether the fence is signaled, as a fastpath optimization for * e.g. dma_fence_wait() or dma_fence_add_callback(). Note that this * callback does not need to make any guarantees beyond that a fence * once indicates as signalled must always return true from this * callback. This callback may return false even if the fence has * completed already, in this case information hasn't propogated throug * the system yet. See also dma_fence_is_signaled(). * * May set &dma_fence.error if returning true. * * This callback is optional. */ bool (*signaled)(struct dma_fence *fence); /** * @wait: * * Custom wait implementation, defaults to dma_fence_default_wait() if * not set. * * The dma_fence_default_wait implementation should work for any fence, as long * as @enable_signaling works correctly. This hook allows drivers to * have an optimized version for the case where a process context is * already available, e.g. if @enable_signaling for the general case * needs to set up a worker thread. * * Must return -ERESTARTSYS if the wait is intr = true and the wait was * interrupted, and remaining jiffies if fence has signaled, or 0 if wait * timed out. Can also return other error values on custom implementations, * which should be treated as if the fence is signaled. For example a hardware * lockup could be reported like that. * * This callback is optional. */ signed long (*wait)(struct dma_fence *fence, bool intr, signed long timeout); /** * @release: * * Called on destruction of fence to release additional resources. * Can be called from irq context. This callback is optional. If it is * NULL, then dma_fence_free() is instead called as the default * implementation. */ void (*release)(struct dma_fence *fence); /** * @fence_value_str: * * Callback to fill in free-form debug info specific to this fence, like * the sequence number. * * This callback is optional. */ void (*fence_value_str)(struct dma_fence *fence, char *str, int size); /** * @timeline_value_str: * * Fills in the current value of the timeline as a string, like the * sequence number. Note that the specific fence passed to this function * should not matter, drivers should only use it to look up the * corresponding timeline structures. */ void (*timeline_value_str)(struct dma_fence *fence, char *str, int size); }; void dma_fence_init(struct dma_fence *fence, const struct dma_fence_ops *ops, spinlock_t *lock, u64 context, u64 seqno); void dma_fence_release(struct kref *kref); void dma_fence_free(struct dma_fence *fence); /** * dma_fence_put - decreases refcount of the fence * @fence: fence to reduce refcount of */ static inline void dma_fence_put(struct dma_fence *fence) { if (fence) kref_put(&fence->refcount, dma_fence_release); } /** * dma_fence_get - increases refcount of the fence * @fence: fence to increase refcount of * * Returns the same fence, with refcount increased by 1. */ static inline struct dma_fence *dma_fence_get(struct dma_fence *fence) { if (fence) kref_get(&fence->refcount); return fence; } /** * dma_fence_get_rcu - get a fence from a dma_resv_list with * rcu read lock * @fence: fence to increase refcount of * * Function returns NULL if no refcount could be obtained, or the fence. */ static inline struct dma_fence *dma_fence_get_rcu(struct dma_fence *fence) { if (kref_get_unless_zero(&fence->refcount)) return fence; else return NULL; } /** * dma_fence_get_rcu_safe - acquire a reference to an RCU tracked fence * @fencep: pointer to fence to increase refcount of * * Function returns NULL if no refcount could be obtained, or the fence. * This function handles acquiring a reference to a fence that may be * reallocated within the RCU grace period (such as with SLAB_TYPESAFE_BY_RCU), * so long as the caller is using RCU on the pointer to the fence. * * An alternative mechanism is to employ a seqlock to protect a bunch of * fences, such as used by struct dma_resv. When using a seqlock, * the seqlock must be taken before and checked after a reference to the * fence is acquired (as shown here). * * The caller is required to hold the RCU read lock. */ static inline struct dma_fence * dma_fence_get_rcu_safe(struct dma_fence __rcu **fencep) { do { struct dma_fence *fence; fence = rcu_dereference(*fencep); if (!fence) return NULL; if (!dma_fence_get_rcu(fence)) continue; /* The atomic_inc_not_zero() inside dma_fence_get_rcu() * provides a full memory barrier upon success (such as now). * This is paired with the write barrier from assigning * to the __rcu protected fence pointer so that if that * pointer still matches the current fence, we know we * have successfully acquire a reference to it. If it no * longer matches, we are holding a reference to some other * reallocated pointer. This is possible if the allocator * is using a freelist like SLAB_TYPESAFE_BY_RCU where the * fence remains valid for the RCU grace period, but it * may be reallocated. When using such allocators, we are * responsible for ensuring the reference we get is to * the right fence, as below. */ if (fence == rcu_access_pointer(*fencep)) return rcu_pointer_handoff(fence); dma_fence_put(fence); } while (1); } int dma_fence_signal(struct dma_fence *fence); int dma_fence_signal_locked(struct dma_fence *fence); signed long dma_fence_default_wait(struct dma_fence *fence, bool intr, signed long timeout); int dma_fence_add_callback(struct dma_fence *fence, struct dma_fence_cb *cb, dma_fence_func_t func); bool dma_fence_remove_callback(struct dma_fence *fence, struct dma_fence_cb *cb); void dma_fence_enable_sw_signaling(struct dma_fence *fence); /** * dma_fence_is_signaled_locked - Return an indication if the fence * is signaled yet. * @fence: the fence to check * * Returns true if the fence was already signaled, false if not. Since this * function doesn't enable signaling, it is not guaranteed to ever return * true if dma_fence_add_callback(), dma_fence_wait() or * dma_fence_enable_sw_signaling() haven't been called before. * * This function requires &dma_fence.lock to be held. * * See also dma_fence_is_signaled(). */ static inline bool dma_fence_is_signaled_locked(struct dma_fence *fence) { if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) return true; if (fence->ops->signaled && fence->ops->signaled(fence)) { dma_fence_signal_locked(fence); return true; } return false; } /** * dma_fence_is_signaled - Return an indication if the fence is signaled yet. * @fence: the fence to check * * Returns true if the fence was already signaled, false if not. Since this * function doesn't enable signaling, it is not guaranteed to ever return * true if dma_fence_add_callback(), dma_fence_wait() or * dma_fence_enable_sw_signaling() haven't been called before. * * It's recommended for seqno fences to call dma_fence_signal when the * operation is complete, it makes it possible to prevent issues from * wraparound between time of issue and time of use by checking the return * value of this function before calling hardware-specific wait instructions. * * See also dma_fence_is_signaled_locked(). */ static inline bool dma_fence_is_signaled(struct dma_fence *fence) { if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) return true; if (fence->ops->signaled && fence->ops->signaled(fence)) { dma_fence_signal(fence); return true; } return false; } /** * __dma_fence_is_later - return if f1 is chronologically later than f2 * @f1: the first fence's seqno * @f2: the second fence's seqno from the same context * @ops: dma_fence_ops associated with the seqno * * Returns true if f1 is chronologically later than f2. Both fences must be * from the same context, since a seqno is not common across contexts. */ static inline bool __dma_fence_is_later(u64 f1, u64 f2, const struct dma_fence_ops *ops) { /* This is for backward compatibility with drivers which can only handle * 32bit sequence numbers. Use a 64bit compare when the driver says to * do so. */ if (ops->use_64bit_seqno) return f1 > f2; return (int)(lower_32_bits(f1) - lower_32_bits(f2)) > 0; } /** * dma_fence_is_later - return if f1 is chronologically later than f2 * @f1: the first fence from the same context * @f2: the second fence from the same context * * Returns true if f1 is chronologically later than f2. Both fences must be * from the same context, since a seqno is not re-used across contexts. */ static inline bool dma_fence_is_later(struct dma_fence *f1, struct dma_fence *f2) { if (WARN_ON(f1->context != f2->context)) return false; return __dma_fence_is_later(f1->seqno, f2->seqno, f1->ops); } /** * dma_fence_later - return the chronologically later fence * @f1: the first fence from the same context * @f2: the second fence from the same context * * Returns NULL if both fences are signaled, otherwise the fence that would be * signaled last. Both fences must be from the same context, since a seqno is * not re-used across contexts. */ static inline struct dma_fence *dma_fence_later(struct dma_fence *f1, struct dma_fence *f2) { if (WARN_ON(f1->context != f2->context)) return NULL; /* * Can't check just DMA_FENCE_FLAG_SIGNALED_BIT here, it may never * have been set if enable_signaling wasn't called, and enabling that * here is overkill. */ if (dma_fence_is_later(f1, f2)) return dma_fence_is_signaled(f1) ? NULL : f1; else return dma_fence_is_signaled(f2) ? NULL : f2; } /** * dma_fence_get_status_locked - returns the status upon completion * @fence: the dma_fence to query * * Drivers can supply an optional error status condition before they signal * the fence (to indicate whether the fence was completed due to an error * rather than success). The value of the status condition is only valid * if the fence has been signaled, dma_fence_get_status_locked() first checks * the signal state before reporting the error status. * * Returns 0 if the fence has not yet been signaled, 1 if the fence has * been signaled without an error condition, or a negative error code * if the fence has been completed in err. */ static inline int dma_fence_get_status_locked(struct dma_fence *fence) { if (dma_fence_is_signaled_locked(fence)) return fence->error ?: 1; else return 0; } int dma_fence_get_status(struct dma_fence *fence); /** * dma_fence_set_error - flag an error condition on the fence * @fence: the dma_fence * @error: the error to store * * Drivers can supply an optional error status condition before they signal * the fence, to indicate that the fence was completed due to an error * rather than success. This must be set before signaling (so that the value * is visible before any waiters on the signal callback are woken). This * helper exists to help catching erroneous setting of #dma_fence.error. */ static inline void dma_fence_set_error(struct dma_fence *fence, int error) { WARN_ON(test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)); WARN_ON(error >= 0 || error < -MAX_ERRNO); fence->error = error; } signed long dma_fence_wait_timeout(struct dma_fence *, bool intr, signed long timeout); signed long dma_fence_wait_any_timeout(struct dma_fence **fences, uint32_t count, bool intr, signed long timeout, uint32_t *idx); /** * dma_fence_wait - sleep until the fence gets signaled * @fence: the fence to wait on * @intr: if true, do an interruptible wait * * This function will return -ERESTARTSYS if interrupted by a signal, * or 0 if the fence was signaled. Other error values may be * returned on custom implementations. * * Performs a synchronous wait on this fence. It is assumed the caller * directly or indirectly holds a reference to the fence, otherwise the * fence might be freed before return, resulting in undefined behavior. * * See also dma_fence_wait_timeout() and dma_fence_wait_any_timeout(). */ static inline signed long dma_fence_wait(struct dma_fence *fence, bool intr) { signed long ret; /* Since dma_fence_wait_timeout cannot timeout with * MAX_SCHEDULE_TIMEOUT, only valid return values are * -ERESTARTSYS and MAX_SCHEDULE_TIMEOUT. */ ret = dma_fence_wait_timeout(fence, intr, MAX_SCHEDULE_TIMEOUT); return ret < 0 ? ret : 0; } struct dma_fence *dma_fence_get_stub(void); u64 dma_fence_context_alloc(unsigned num); #define DMA_FENCE_TRACE(f, fmt, args...) \ do { \ struct dma_fence *__ff = (f); \ if (IS_ENABLED(CONFIG_DMA_FENCE_TRACE)) \ pr_info("f %llu#%llu: " fmt, \ __ff->context, __ff->seqno, ##args); \ } while (0) #define DMA_FENCE_WARN(f, fmt, args...) \ do { \ struct dma_fence *__ff = (f); \ pr_warn("f %llu#%llu: " fmt, __ff->context, __ff->seqno,\ ##args); \ } while (0) #define DMA_FENCE_ERR(f, fmt, args...) \ do { \ struct dma_fence *__ff = (f); \ pr_err("f %llu#%llu: " fmt, __ff->context, __ff->seqno, \ ##args); \ } while (0) #endif /* __LINUX_DMA_FENCE_H */