#ifndef _LINUX_INIT_H #define _LINUX_INIT_H #include #include /* These macros are used to mark some functions or * initialized data (doesn't apply to uninitialized data) * as `initialization' functions. The kernel can take this * as hint that the function is used only during the initialization * phase and free up used memory resources after * * Usage: * For functions: * * You should add __init immediately before the function name, like: * * static void __init initme(int x, int y) * { * extern int z; z = x * y; * } * * If the function has a prototype somewhere, you can also add * __init between closing brace of the prototype and semicolon: * * extern int initialize_foobar_device(int, int, int) __init; * * For initialized data: * You should insert __initdata or __initconst between the variable name * and equal sign followed by value, e.g.: * * static int init_variable __initdata = 0; * static const char linux_logo[] __initconst = { 0x32, 0x36, ... }; * * Don't forget to initialize data not at file scope, i.e. within a function, * as gcc otherwise puts the data into the bss section and not into the init * section. */ /* These are for everybody (although not all archs will actually discard it in modules) */ #define __init __section(.init.text) __cold notrace #define __initdata __section(.init.data) #define __initconst __constsection(.init.rodata) #define __exitdata __section(.exit.data) #define __exit_call __used __section(.exitcall.exit) /* * Some architecture have tool chains which do not handle rodata attributes * correctly. For those disable special sections for const, so that other * architectures can annotate correctly. */ #ifdef CONFIG_BROKEN_RODATA #define __constsection(x) #else #define __constsection(x) __section(x) #endif /* * modpost check for section mismatches during the kernel build. * A section mismatch happens when there are references from a * code or data section to an init section (both code or data). * The init sections are (for most archs) discarded by the kernel * when early init has completed so all such references are potential bugs. * For exit sections the same issue exists. * * The following markers are used for the cases where the reference to * the *init / *exit section (code or data) is valid and will teach * modpost not to issue a warning. Intended semantics is that a code or * data tagged __ref* can reference code or data from init section without * producing a warning (of course, no warning does not mean code is * correct, so optimally document why the __ref is needed and why it's OK). * * The markers follow same syntax rules as __init / __initdata. */ #define __ref __section(.ref.text) noinline #define __refdata __section(.ref.data) #define __refconst __constsection(.ref.rodata) /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref #ifdef MODULE #define __exitused #else #define __exitused __used #endif #define __exit __section(.exit.text) __exitused __cold notrace /* temporary, until all users are removed */ #define __cpuinit #define __cpuinitdata #define __cpuinitconst #define __cpuexit #define __cpuexitdata #define __cpuexitconst /* Used for MEMORY_HOTPLUG */ #define __meminit __section(.meminit.text) __cold notrace #define __meminitdata __section(.meminit.data) #define __meminitconst __constsection(.meminit.rodata) #define __memexit __section(.memexit.text) __exitused __cold notrace #define __memexitdata __section(.memexit.data) #define __memexitconst __constsection(.memexit.rodata) /* For assembly routines */ #define __HEAD .section ".head.text","ax" #define __INIT .section ".init.text","ax" #define __FINIT .previous #define __INITDATA .section ".init.data","aw",%progbits #define __INITRODATA .section ".init.rodata","a",%progbits #define __FINITDATA .previous /* temporary, until all users are removed */ #define __CPUINIT #define __MEMINIT .section ".meminit.text", "ax" #define __MEMINITDATA .section ".meminit.data", "aw" #define __MEMINITRODATA .section ".meminit.rodata", "a" /* silence warnings when references are OK */ #define __REF .section ".ref.text", "ax" #define __REFDATA .section ".ref.data", "aw" #define __REFCONST .section ".ref.rodata", "a" #ifndef __ASSEMBLY__ /* * Used for initialization calls.. */ typedef int (*initcall_t)(void); typedef void (*exitcall_t)(void); extern initcall_t __con_initcall_start[], __con_initcall_end[]; extern initcall_t __security_initcall_start[], __security_initcall_end[]; /* Used for contructor calls. */ typedef void (*ctor_fn_t)(void); /* Defined in init/main.c */ extern int do_one_initcall(initcall_t fn); extern char __initdata boot_command_line[]; extern char *saved_command_line; extern unsigned int reset_devices; /* used by init/main.c */ void setup_arch(char **); void prepare_namespace(void); void __init load_default_modules(void); int __init init_rootfs(void); extern void (*late_time_init)(void); extern bool initcall_debug; #endif #ifndef MODULE #ifndef __ASSEMBLY__ #ifdef CONFIG_LTO /* Work around a LTO gcc problem: when there is no reference to a variable * in a module it will be moved to the end of the program. This causes * reordering of initcalls which the kernel does not like. * Add a dummy reference function to avoid this. The function is * deleted by the linker. */ #define LTO_REFERENCE_INITCALL(x) \ ; /* yes this is needed */ \ static __used __exit void *reference_##x(void) \ { \ return &x; \ } #else #define LTO_REFERENCE_INITCALL(x) #endif /* initcalls are now grouped by functionality into separate * subsections. Ordering inside the subsections is determined * by link order. * For backwards compatibility, initcall() puts the call in * the device init subsection. * * The `id' arg to __define_initcall() is needed so that multiple initcalls * can point at the same handler without causing duplicate-symbol build errors. */ #define __define_initcall(fn, id) \ static initcall_t __initcall_##fn##id __used \ __attribute__((__section__(".initcall" #id ".init"))) = fn; \ LTO_REFERENCE_INITCALL(__initcall_##fn##id) /* * Early initcalls run before initializing SMP. * * Only for built-in code, not modules. */ #define early_initcall(fn) __define_initcall(fn, early) /* * A "pure" initcall has no dependencies on anything else, and purely * initializes variables that couldn't be statically initialized. * * This only exists for built-in code, not for modules. * Keep main.c:initcall_level_names[] in sync. */ #define pure_initcall(fn) __define_initcall(fn, 0) #define core_initcall(fn) __define_initcall(fn, 1) #define core_initcall_sync(fn) __define_initcall(fn, 1s) #define postcore_initcall(fn) __define_initcall(fn, 2) #define postcore_initcall_sync(fn) __define_initcall(fn, 2s) #define arch_initcall(fn) __define_initcall(fn, 3) #define arch_initcall_sync(fn) __define_initcall(fn, 3s) #define subsys_initcall(fn) __define_initcall(fn, 4) #define subsys_initcall_sync(fn) __define_initcall(fn, 4s) #define fs_initcall(fn) __define_initcall(fn, 5) #define fs_initcall_sync(fn) __define_initcall(fn, 5s) #define rootfs_initcall(fn) __define_initcall(fn, rootfs) #define device_initcall(fn) __define_initcall(fn, 6) #define device_initcall_sync(fn) __define_initcall(fn, 6s) #define late_initcall(fn) __define_initcall(fn, 7) #define late_initcall_sync(fn) __define_initcall(fn, 7s) #define __initcall(fn) device_initcall(fn) #define __exitcall(fn) \ static exitcall_t __exitcall_##fn __exit_call = fn #define console_initcall(fn) \ static initcall_t __initcall_##fn \ __used __section(.con_initcall.init) = fn #define security_initcall(fn) \ static initcall_t __initcall_##fn \ __used __section(.security_initcall.init) = fn struct obs_kernel_param { const char *str; int (*setup_func)(char *); int early; }; /* * Only for really core code. See moduleparam.h for the normal way. * * Force the alignment so the compiler doesn't space elements of the * obs_kernel_param "array" too far apart in .init.setup. */ #define __setup_param(str, unique_id, fn, early) \ static const char __setup_str_##unique_id[] __initconst \ __aligned(1) = str; \ static struct obs_kernel_param __setup_##unique_id \ __used __section(.init.setup) \ __attribute__((aligned((sizeof(long))))) \ = { __setup_str_##unique_id, fn, early } #define __setup(str, fn) \ __setup_param(str, fn, fn, 0) /* NOTE: fn is as per module_param, not __setup! Emits warning if fn * returns non-zero. */ #define early_param(str, fn) \ __setup_param(str, fn, fn, 1) /* Relies on boot_command_line being set */ void __init parse_early_param(void); void __init parse_early_options(char *cmdline); #endif /* __ASSEMBLY__ */ /** * module_init() - driver initialization entry point * @x: function to be run at kernel boot time or module insertion * * module_init() will either be called during do_initcalls() (if * builtin) or at module insertion time (if a module). There can only * be one per module. */ #define module_init(x) __initcall(x); /** * module_exit() - driver exit entry point * @x: function to be run when driver is removed * * module_exit() will wrap the driver clean-up code * with cleanup_module() when used with rmmod when * the driver is a module. If the driver is statically * compiled into the kernel, module_exit() has no effect. * There can only be one per module. */ #define module_exit(x) __exitcall(x); #else /* MODULE */ /* * In most cases loadable modules do not need custom * initcall levels. There are still some valid cases where * a driver may be needed early if built in, and does not * matter when built as a loadable module. Like bus * snooping debug drivers. */ #define early_initcall(fn) module_init(fn) #define core_initcall(fn) module_init(fn) #define core_initcall_sync(fn) module_init(fn) #define postcore_initcall(fn) module_init(fn) #define postcore_initcall_sync(fn) module_init(fn) #define arch_initcall(fn) module_init(fn) #define subsys_initcall(fn) module_init(fn) #define subsys_initcall_sync(fn) module_init(fn) #define fs_initcall(fn) module_init(fn) #define fs_initcall_sync(fn) module_init(fn) #define rootfs_initcall(fn) module_init(fn) #define device_initcall(fn) module_init(fn) #define device_initcall_sync(fn) module_init(fn) #define late_initcall(fn) module_init(fn) #define late_initcall_sync(fn) module_init(fn) #define console_initcall(fn) module_init(fn) #define security_initcall(fn) module_init(fn) /* Each module must use one module_init(). */ #define module_init(initfn) \ static inline initcall_t __inittest(void) \ { return initfn; } \ int init_module(void) __attribute__((alias(#initfn))); /* This is only required if you want to be unloadable. */ #define module_exit(exitfn) \ static inline exitcall_t __exittest(void) \ { return exitfn; } \ void cleanup_module(void) __attribute__((alias(#exitfn))); #define __setup_param(str, unique_id, fn) /* nothing */ #define __setup(str, func) /* nothing */ #endif /* Data marked not to be saved by software suspend */ #define __nosavedata __section(.data..nosave) /* This means "can be init if no module support, otherwise module load may call it." */ #ifdef CONFIG_MODULES #define __init_or_module #define __initdata_or_module #define __initconst_or_module #define __INIT_OR_MODULE .text #define __INITDATA_OR_MODULE .data #define __INITRODATA_OR_MODULE .section ".rodata","a",%progbits #else #define __init_or_module __init #define __initdata_or_module __initdata #define __initconst_or_module __initconst #define __INIT_OR_MODULE __INIT #define __INITDATA_OR_MODULE __INITDATA #define __INITRODATA_OR_MODULE __INITRODATA #endif /*CONFIG_MODULES*/ #ifdef MODULE #define __exit_p(x) x #else #define __exit_p(x) NULL #endif #endif /* _LINUX_INIT_H */