/* SPDX-License-Identifier: GPL-2.0+ */ /* * ipmi.h * * MontaVista IPMI interface * * Author: MontaVista Software, Inc. * Corey Minyard * source@mvista.com * * Copyright 2002 MontaVista Software Inc. * */ #ifndef __LINUX_IPMI_H #define __LINUX_IPMI_H #include #include #include #include /* For acpi_handle */ struct module; struct device; /* * Opaque type for a IPMI message user. One of these is needed to * send and receive messages. */ struct ipmi_user; /* * Stuff coming from the receive interface comes as one of these. * They are allocated, the receiver must free them with * ipmi_free_recv_msg() when done with the message. The link is not * used after the message is delivered, so the upper layer may use the * link to build a linked list, if it likes. */ struct ipmi_recv_msg { struct list_head link; /* * The type of message as defined in the "Receive Types" * defines above. */ int recv_type; struct ipmi_user *user; struct ipmi_addr addr; long msgid; struct kernel_ipmi_msg msg; /* * The user_msg_data is the data supplied when a message was * sent, if this is a response to a sent message. If this is * not a response to a sent message, then user_msg_data will * be NULL. If the user above is NULL, then this will be the * intf. */ void *user_msg_data; /* * Call this when done with the message. It will presumably free * the message and do any other necessary cleanup. */ void (*done)(struct ipmi_recv_msg *msg); /* * Place-holder for the data, don't make any assumptions about * the size or existence of this, since it may change. */ unsigned char msg_data[IPMI_MAX_MSG_LENGTH]; }; /* Allocate and free the receive message. */ void ipmi_free_recv_msg(struct ipmi_recv_msg *msg); struct ipmi_user_hndl { /* * Routine type to call when a message needs to be routed to * the upper layer. This will be called with some locks held, * the only IPMI routines that can be called are ipmi_request * and the alloc/free operations. The handler_data is the * variable supplied when the receive handler was registered. */ void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg, void *user_msg_data); /* * Called when the interface detects a watchdog pre-timeout. If * this is NULL, it will be ignored for the user. */ void (*ipmi_watchdog_pretimeout)(void *handler_data); /* * If not NULL, called at panic time after the interface has * been set up to handle run to completion. */ void (*ipmi_panic_handler)(void *handler_data); /* * Called when the interface has been removed. After this returns * the user handle will be invalid. The interface may or may * not be usable when this is called, but it will return errors * if it is not usable. */ void (*shutdown)(void *handler_data); }; /* Create a new user of the IPMI layer on the given interface number. */ int ipmi_create_user(unsigned int if_num, const struct ipmi_user_hndl *handler, void *handler_data, struct ipmi_user **user); /* * Destroy the given user of the IPMI layer. Note that after this * function returns, the system is guaranteed to not call any * callbacks for the user. Thus as long as you destroy all the users * before you unload a module, you will be safe. And if you destroy * the users before you destroy the callback structures, it should be * safe, too. */ int ipmi_destroy_user(struct ipmi_user *user); /* Get the IPMI version of the BMC we are talking to. */ int ipmi_get_version(struct ipmi_user *user, unsigned char *major, unsigned char *minor); /* * Set and get the slave address and LUN that we will use for our * source messages. Note that this affects the interface, not just * this user, so it will affect all users of this interface. This is * so some initialization code can come in and do the OEM-specific * things it takes to determine your address (if not the BMC) and set * it for everyone else. Note that each channel can have its own * address. */ int ipmi_set_my_address(struct ipmi_user *user, unsigned int channel, unsigned char address); int ipmi_get_my_address(struct ipmi_user *user, unsigned int channel, unsigned char *address); int ipmi_set_my_LUN(struct ipmi_user *user, unsigned int channel, unsigned char LUN); int ipmi_get_my_LUN(struct ipmi_user *user, unsigned int channel, unsigned char *LUN); /* * Like ipmi_request, but lets you specify the number of retries and * the retry time. The retries is the number of times the message * will be resent if no reply is received. If set to -1, the default * value will be used. The retry time is the time in milliseconds * between retries. If set to zero, the default value will be * used. * * Don't use this unless you *really* have to. It's primarily for the * IPMI over LAN converter; since the LAN stuff does its own retries, * it makes no sense to do it here. However, this can be used if you * have unusual requirements. */ int ipmi_request_settime(struct ipmi_user *user, struct ipmi_addr *addr, long msgid, struct kernel_ipmi_msg *msg, void *user_msg_data, int priority, int max_retries, unsigned int retry_time_ms); /* * Like ipmi_request, but with messages supplied. This will not * allocate any memory, and the messages may be statically allocated * (just make sure to do the "done" handling on them). Note that this * is primarily for the watchdog timer, since it should be able to * send messages even if no memory is available. This is subject to * change as the system changes, so don't use it unless you REALLY * have to. */ int ipmi_request_supply_msgs(struct ipmi_user *user, struct ipmi_addr *addr, long msgid, struct kernel_ipmi_msg *msg, void *user_msg_data, void *supplied_smi, struct ipmi_recv_msg *supplied_recv, int priority); /* * Poll the IPMI interface for the user. This causes the IPMI code to * do an immediate check for information from the driver and handle * anything that is immediately pending. This will not block in any * way. This is useful if you need to spin waiting for something to * happen in the IPMI driver. */ void ipmi_poll_interface(struct ipmi_user *user); /* * When commands come in to the SMS, the user can register to receive * them. Only one user can be listening on a specific netfn/cmd/chan tuple * at a time, you will get an EBUSY error if the command is already * registered. If a command is received that does not have a user * registered, the driver will automatically return the proper * error. Channels are specified as a bitfield, use IPMI_CHAN_ALL to * mean all channels. */ int ipmi_register_for_cmd(struct ipmi_user *user, unsigned char netfn, unsigned char cmd, unsigned int chans); int ipmi_unregister_for_cmd(struct ipmi_user *user, unsigned char netfn, unsigned char cmd, unsigned int chans); /* * Go into a mode where the driver will not autonomously attempt to do * things with the interface. It will still respond to attentions and * interrupts, and it will expect that commands will complete. It * will not automatcially check for flags, events, or things of that * nature. * * This is primarily used for firmware upgrades. The idea is that * when you go into firmware upgrade mode, you do this operation * and the driver will not attempt to do anything but what you tell * it or what the BMC asks for. * * Note that if you send a command that resets the BMC, the driver * will still expect a response from that command. So the BMC should * reset itself *after* the response is sent. Resetting before the * response is just silly. * * If in auto maintenance mode, the driver will automatically go into * maintenance mode for 30 seconds if it sees a cold reset, a warm * reset, or a firmware NetFN. This means that code that uses only * firmware NetFN commands to do upgrades will work automatically * without change, assuming it sends a message every 30 seconds or * less. * * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means. */ int ipmi_get_maintenance_mode(struct ipmi_user *user); int ipmi_set_maintenance_mode(struct ipmi_user *user, int mode); /* * When the user is created, it will not receive IPMI events by * default. The user must set this to TRUE to get incoming events. * The first user that sets this to TRUE will receive all events that * have been queued while no one was waiting for events. */ int ipmi_set_gets_events(struct ipmi_user *user, bool val); /* * Called when a new SMI is registered. This will also be called on * every existing interface when a new watcher is registered with * ipmi_smi_watcher_register(). */ struct ipmi_smi_watcher { struct list_head link; /* * You must set the owner to the current module, if you are in * a module (generally just set it to "THIS_MODULE"). */ struct module *owner; /* * These two are called with read locks held for the interface * the watcher list. So you can add and remove users from the * IPMI interface, send messages, etc., but you cannot add * or remove SMI watchers or SMI interfaces. */ void (*new_smi)(int if_num, struct device *dev); void (*smi_gone)(int if_num); }; int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher); int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher); /* * The following are various helper functions for dealing with IPMI * addresses. */ /* Return the maximum length of an IPMI address given it's type. */ unsigned int ipmi_addr_length(int addr_type); /* Validate that the given IPMI address is valid. */ int ipmi_validate_addr(struct ipmi_addr *addr, int len); /* * How did the IPMI driver find out about the device? */ enum ipmi_addr_src { SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS, SI_PCI, SI_DEVICETREE, SI_PLATFORM, SI_LAST }; const char *ipmi_addr_src_to_str(enum ipmi_addr_src src); union ipmi_smi_info_union { #ifdef CONFIG_ACPI /* * the acpi_info element is defined for the SI_ACPI * address type */ struct { acpi_handle acpi_handle; } acpi_info; #endif }; struct ipmi_smi_info { enum ipmi_addr_src addr_src; /* * Base device for the interface. Don't forget to put this when * you are done. */ struct device *dev; /* * The addr_info provides more detailed info for some IPMI * devices, depending on the addr_src. Currently only SI_ACPI * info is provided. */ union ipmi_smi_info_union addr_info; }; /* This is to get the private info of struct ipmi_smi */ extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data); #endif /* __LINUX_IPMI_H */