#ifndef _LINUX_PTRACE_H #define _LINUX_PTRACE_H #include /* For unlikely. */ #include /* For struct task_struct. */ #include /* for IS_ERR_VALUE */ #include /* For BUG_ON. */ #include /* * Ptrace flags * * The owner ship rules for task->ptrace which holds the ptrace * flags is simple. When a task is running it owns it's task->ptrace * flags. When the a task is stopped the ptracer owns task->ptrace. */ #define PT_SEIZED 0x00010000 /* SEIZE used, enable new behavior */ #define PT_PTRACED 0x00000001 #define PT_DTRACE 0x00000002 /* delayed trace (used on m68k, i386) */ #define PT_PTRACE_CAP 0x00000004 /* ptracer can follow suid-exec */ #define PT_OPT_FLAG_SHIFT 3 /* PT_TRACE_* event enable flags */ #define PT_EVENT_FLAG(event) (1 << (PT_OPT_FLAG_SHIFT + (event))) #define PT_TRACESYSGOOD PT_EVENT_FLAG(0) #define PT_TRACE_FORK PT_EVENT_FLAG(PTRACE_EVENT_FORK) #define PT_TRACE_VFORK PT_EVENT_FLAG(PTRACE_EVENT_VFORK) #define PT_TRACE_CLONE PT_EVENT_FLAG(PTRACE_EVENT_CLONE) #define PT_TRACE_EXEC PT_EVENT_FLAG(PTRACE_EVENT_EXEC) #define PT_TRACE_VFORK_DONE PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE) #define PT_TRACE_EXIT PT_EVENT_FLAG(PTRACE_EVENT_EXIT) #define PT_TRACE_SECCOMP PT_EVENT_FLAG(PTRACE_EVENT_SECCOMP) #define PT_EXITKILL (PTRACE_O_EXITKILL << PT_OPT_FLAG_SHIFT) /* single stepping state bits (used on ARM and PA-RISC) */ #define PT_SINGLESTEP_BIT 31 #define PT_SINGLESTEP (1<real_parent, child->parent); } static inline void ptrace_unlink(struct task_struct *child) { if (unlikely(child->ptrace)) __ptrace_unlink(child); } int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr, unsigned long data); int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr, unsigned long data); /** * ptrace_parent - return the task that is tracing the given task * @task: task to consider * * Returns %NULL if no one is tracing @task, or the &struct task_struct * pointer to its tracer. * * Must called under rcu_read_lock(). The pointer returned might be kept * live only by RCU. During exec, this may be called with task_lock() held * on @task, still held from when check_unsafe_exec() was called. */ static inline struct task_struct *ptrace_parent(struct task_struct *task) { if (unlikely(task->ptrace)) return rcu_dereference(task->parent); return NULL; } /** * ptrace_event_enabled - test whether a ptrace event is enabled * @task: ptracee of interest * @event: %PTRACE_EVENT_* to test * * Test whether @event is enabled for ptracee @task. * * Returns %true if @event is enabled, %false otherwise. */ static inline bool ptrace_event_enabled(struct task_struct *task, int event) { return task->ptrace & PT_EVENT_FLAG(event); } /** * ptrace_event - possibly stop for a ptrace event notification * @event: %PTRACE_EVENT_* value to report * @message: value for %PTRACE_GETEVENTMSG to return * * Check whether @event is enabled and, if so, report @event and @message * to the ptrace parent. * * Called without locks. */ static inline void ptrace_event(int event, unsigned long message) { if (unlikely(ptrace_event_enabled(current, event))) { current->ptrace_message = message; ptrace_notify((event << 8) | SIGTRAP); } else if (event == PTRACE_EVENT_EXEC) { /* legacy EXEC report via SIGTRAP */ if ((current->ptrace & (PT_PTRACED|PT_SEIZED)) == PT_PTRACED) send_sig(SIGTRAP, current, 0); } } /** * ptrace_init_task - initialize ptrace state for a new child * @child: new child task * @ptrace: true if child should be ptrace'd by parent's tracer * * This is called immediately after adding @child to its parent's children * list. @ptrace is false in the normal case, and true to ptrace @child. * * Called with current's siglock and write_lock_irq(&tasklist_lock) held. */ static inline void ptrace_init_task(struct task_struct *child, bool ptrace) { INIT_LIST_HEAD(&child->ptrace_entry); INIT_LIST_HEAD(&child->ptraced); child->jobctl = 0; child->ptrace = 0; child->parent = child->real_parent; if (unlikely(ptrace) && current->ptrace) { child->ptrace = current->ptrace; __ptrace_link(child, current->parent); if (child->ptrace & PT_SEIZED) task_set_jobctl_pending(child, JOBCTL_TRAP_STOP); else sigaddset(&child->pending.signal, SIGSTOP); set_tsk_thread_flag(child, TIF_SIGPENDING); } } /** * ptrace_release_task - final ptrace-related cleanup of a zombie being reaped * @task: task in %EXIT_DEAD state * * Called with write_lock(&tasklist_lock) held. */ static inline void ptrace_release_task(struct task_struct *task) { BUG_ON(!list_empty(&task->ptraced)); ptrace_unlink(task); BUG_ON(!list_empty(&task->ptrace_entry)); } #ifndef force_successful_syscall_return /* * System call handlers that, upon successful completion, need to return a * negative value should call force_successful_syscall_return() right before * returning. On architectures where the syscall convention provides for a * separate error flag (e.g., alpha, ia64, ppc{,64}, sparc{,64}, possibly * others), this macro can be used to ensure that the error flag will not get * set. On architectures which do not support a separate error flag, the macro * is a no-op and the spurious error condition needs to be filtered out by some * other means (e.g., in user-level, by passing an extra argument to the * syscall handler, or something along those lines). */ #define force_successful_syscall_return() do { } while (0) #endif #ifndef is_syscall_success /* * On most systems we can tell if a syscall is a success based on if the retval * is an error value. On some systems like ia64 and powerpc they have different * indicators of success/failure and must define their own. */ #define is_syscall_success(regs) (!IS_ERR_VALUE((unsigned long)(regs_return_value(regs)))) #endif /* * should define the following things inside #ifdef __KERNEL__. * * These do-nothing inlines are used when the arch does not * implement single-step. The kerneldoc comments are here * to document the interface for all arch definitions. */ #ifndef arch_has_single_step /** * arch_has_single_step - does this CPU support user-mode single-step? * * If this is defined, then there must be function declarations or * inlines for user_enable_single_step() and user_disable_single_step(). * arch_has_single_step() should evaluate to nonzero iff the machine * supports instruction single-step for user mode. * It can be a constant or it can test a CPU feature bit. */ #define arch_has_single_step() (0) /** * user_enable_single_step - single-step in user-mode task * @task: either current or a task stopped in %TASK_TRACED * * This can only be called when arch_has_single_step() has returned nonzero. * Set @task so that when it returns to user mode, it will trap after the * next single instruction executes. If arch_has_block_step() is defined, * this must clear the effects of user_enable_block_step() too. */ static inline void user_enable_single_step(struct task_struct *task) { BUG(); /* This can never be called. */ } /** * user_disable_single_step - cancel user-mode single-step * @task: either current or a task stopped in %TASK_TRACED * * Clear @task of the effects of user_enable_single_step() and * user_enable_block_step(). This can be called whether or not either * of those was ever called on @task, and even if arch_has_single_step() * returned zero. */ static inline void user_disable_single_step(struct task_struct *task) { } #else extern void user_enable_single_step(struct task_struct *); extern void user_disable_single_step(struct task_struct *); #endif /* arch_has_single_step */ #ifndef arch_has_block_step /** * arch_has_block_step - does this CPU support user-mode block-step? * * If this is defined, then there must be a function declaration or inline * for user_enable_block_step(), and arch_has_single_step() must be defined * too. arch_has_block_step() should evaluate to nonzero iff the machine * supports step-until-branch for user mode. It can be a constant or it * can test a CPU feature bit. */ #define arch_has_block_step() (0) /** * user_enable_block_step - step until branch in user-mode task * @task: either current or a task stopped in %TASK_TRACED * * This can only be called when arch_has_block_step() has returned nonzero, * and will never be called when single-instruction stepping is being used. * Set @task so that when it returns to user mode, it will trap after the * next branch or trap taken. */ static inline void user_enable_block_step(struct task_struct *task) { BUG(); /* This can never be called. */ } #else extern void user_enable_block_step(struct task_struct *); #endif /* arch_has_block_step */ #ifdef ARCH_HAS_USER_SINGLE_STEP_INFO extern void user_single_step_siginfo(struct task_struct *tsk, struct pt_regs *regs, siginfo_t *info); #else static inline void user_single_step_siginfo(struct task_struct *tsk, struct pt_regs *regs, siginfo_t *info) { memset(info, 0, sizeof(*info)); info->si_signo = SIGTRAP; } #endif #ifndef arch_ptrace_stop_needed /** * arch_ptrace_stop_needed - Decide whether arch_ptrace_stop() should be called * @code: current->exit_code value ptrace will stop with * @info: siginfo_t pointer (or %NULL) for signal ptrace will stop with * * This is called with the siglock held, to decide whether or not it's * necessary to release the siglock and call arch_ptrace_stop() with the * same @code and @info arguments. It can be defined to a constant if * arch_ptrace_stop() is never required, or always is. On machines where * this makes sense, it should be defined to a quick test to optimize out * calling arch_ptrace_stop() when it would be superfluous. For example, * if the thread has not been back to user mode since the last stop, the * thread state might indicate that nothing needs to be done. */ #define arch_ptrace_stop_needed(code, info) (0) #endif #ifndef arch_ptrace_stop /** * arch_ptrace_stop - Do machine-specific work before stopping for ptrace * @code: current->exit_code value ptrace will stop with * @info: siginfo_t pointer (or %NULL) for signal ptrace will stop with * * This is called with no locks held when arch_ptrace_stop_needed() has * just returned nonzero. It is allowed to block, e.g. for user memory * access. The arch can have machine-specific work to be done before * ptrace stops. On ia64, register backing store gets written back to user * memory here. Since this can be costly (requires dropping the siglock), * we only do it when the arch requires it for this particular stop, as * indicated by arch_ptrace_stop_needed(). */ #define arch_ptrace_stop(code, info) do { } while (0) #endif #ifndef current_pt_regs #define current_pt_regs() task_pt_regs(current) #endif #ifndef ptrace_signal_deliver #define ptrace_signal_deliver() ((void)0) #endif /* * unlike current_pt_regs(), this one is equal to task_pt_regs(current) * on *all* architectures; the only reason to have a per-arch definition * is optimisation. */ #ifndef signal_pt_regs #define signal_pt_regs() task_pt_regs(current) #endif #ifndef current_user_stack_pointer #define current_user_stack_pointer() user_stack_pointer(current_pt_regs()) #endif extern int task_current_syscall(struct task_struct *target, long *callno, unsigned long args[6], unsigned int maxargs, unsigned long *sp, unsigned long *pc); #endif