/* * driver.h -- SoC Regulator driver support. * * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. * * Author: Liam Girdwood * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Regulator Driver Interface. */ #ifndef __LINUX_REGULATOR_DRIVER_H_ #define __LINUX_REGULATOR_DRIVER_H_ #include #include struct regulator_dev; struct regulator_init_data; /** * struct regulator_ops - regulator operations. * * This struct describes regulator operations which can be implemented by * regulator chip drivers. * * @enable: Enable the regulator. * @disable: Disable the regulator. * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. * * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. * @get_voltage: Return the currently configured voltage for the regulator. * * @set_current_limit: Configure a limit for a current-limited regulator. * @get_current_limit: Get the limit for a current-limited regulator. * * @set_mode: Set the operating mode for the regulator. * @get_mode: Get the current operating mode for the regulator. * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. * @set_suspend_enable: Mark the regulator as enabled when the system is * suspended. * @set_suspend_disable: Mark the regulator as disabled when the system is * suspended. * @set_suspend_mode: Set the operating mode for the regulator when the * system is suspended. */ struct regulator_ops { /* get/set regulator voltage */ int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV); int (*get_voltage) (struct regulator_dev *); /* get/set regulator current */ int (*set_current_limit) (struct regulator_dev *, int min_uA, int max_uA); int (*get_current_limit) (struct regulator_dev *); /* enable/disable regulator */ int (*enable) (struct regulator_dev *); int (*disable) (struct regulator_dev *); int (*is_enabled) (struct regulator_dev *); /* get/set regulator operating mode (defined in regulator.h) */ int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); /* get most efficient regulator operating mode for load */ unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, int output_uV, int load_uA); /* the operations below are for configuration of regulator state when * its parent PMIC enters a global STANDBY/HIBERNATE state */ /* set regulator suspend voltage */ int (*set_suspend_voltage) (struct regulator_dev *, int uV); /* enable/disable regulator in suspend state */ int (*set_suspend_enable) (struct regulator_dev *); int (*set_suspend_disable) (struct regulator_dev *); /* set regulator suspend operating mode (defined in regulator.h) */ int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode); }; /* * Regulators can either control voltage or current. */ enum regulator_type { REGULATOR_VOLTAGE, REGULATOR_CURRENT, }; /** * struct regulator_desc - Regulator descriptor * * Each regulator registered with the core is described with a structure of * this type. * * @name: Identifying name for the regulator. * @id: Numerical identifier for the regulator. * @ops: Regulator operations table. * @irq: Interrupt number for the regulator. * @type: Indicates if the regulator is a voltage or current regulator. * @owner: Module providing the regulator, used for refcounting. */ struct regulator_desc { const char *name; int id; struct regulator_ops *ops; int irq; enum regulator_type type; struct module *owner; }; struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, struct device *dev, void *driver_data); void regulator_unregister(struct regulator_dev *rdev); int regulator_notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); void *rdev_get_drvdata(struct regulator_dev *rdev); struct device *rdev_get_dev(struct regulator_dev *rdev); int rdev_get_id(struct regulator_dev *rdev); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); #endif