/****************************************************************************** * xen_netif.h * * Unified network-device I/O interface for Xen guest OSes. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to * deal in the Software without restriction, including without limitation the * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Copyright (c) 2003-2004, Keir Fraser */ #ifndef __XEN_PUBLIC_IO_XEN_NETIF_H__ #define __XEN_PUBLIC_IO_XEN_NETIF_H__ #include "ring.h" #include "../grant_table.h" /* * Older implementation of Xen network frontend / backend has an * implicit dependency on the MAX_SKB_FRAGS as the maximum number of * ring slots a skb can use. Netfront / netback may not work as * expected when frontend and backend have different MAX_SKB_FRAGS. * * A better approach is to add mechanism for netfront / netback to * negotiate this value. However we cannot fix all possible * frontends, so we need to define a value which states the minimum * slots backend must support. * * The minimum value derives from older Linux kernel's MAX_SKB_FRAGS * (18), which is proved to work with most frontends. Any new backend * which doesn't negotiate with frontend should expect frontend to * send a valid packet using slots up to this value. */ #define XEN_NETIF_NR_SLOTS_MIN 18 /* * Notifications after enqueuing any type of message should be conditional on * the appropriate req_event or rsp_event field in the shared ring. * If the client sends notification for rx requests then it should specify * feature 'feature-rx-notify' via xenbus. Otherwise the backend will assume * that it cannot safely queue packets (as it may not be kicked to send them). */ /* * "feature-split-event-channels" is introduced to separate guest TX * and RX notification. Backend either doesn't support this feature or * advertises it via xenstore as 0 (disabled) or 1 (enabled). * * To make use of this feature, frontend should allocate two event * channels for TX and RX, advertise them to backend as * "event-channel-tx" and "event-channel-rx" respectively. If frontend * doesn't want to use this feature, it just writes "event-channel" * node as before. */ /* * Multiple transmit and receive queues: * If supported, the backend will write the key "multi-queue-max-queues" to * the directory for that vif, and set its value to the maximum supported * number of queues. * Frontends that are aware of this feature and wish to use it can write the * key "multi-queue-num-queues", set to the number they wish to use, which * must be greater than zero, and no more than the value reported by the backend * in "multi-queue-max-queues". * * Queues replicate the shared rings and event channels. * "feature-split-event-channels" may optionally be used when using * multiple queues, but is not mandatory. * * Each queue consists of one shared ring pair, i.e. there must be the same * number of tx and rx rings. * * For frontends requesting just one queue, the usual event-channel and * ring-ref keys are written as before, simplifying the backend processing * to avoid distinguishing between a frontend that doesn't understand the * multi-queue feature, and one that does, but requested only one queue. * * Frontends requesting two or more queues must not write the toplevel * event-channel (or event-channel-{tx,rx}) and {tx,rx}-ring-ref keys, * instead writing those keys under sub-keys having the name "queue-N" where * N is the integer ID of the queue for which those keys belong. Queues * are indexed from zero. For example, a frontend with two queues and split * event channels must write the following set of queue-related keys: * * /local/domain/1/device/vif/0/multi-queue-num-queues = "2" * /local/domain/1/device/vif/0/queue-0 = "" * /local/domain/1/device/vif/0/queue-0/tx-ring-ref = "" * /local/domain/1/device/vif/0/queue-0/rx-ring-ref = "" * /local/domain/1/device/vif/0/queue-0/event-channel-tx = "" * /local/domain/1/device/vif/0/queue-0/event-channel-rx = "" * /local/domain/1/device/vif/0/queue-1 = "" * /local/domain/1/device/vif/0/queue-1/tx-ring-ref = "" * /local/domain/1/device/vif/0/queue-1/rx-ring-ref = "//feature-ctrl-ring = "1" * * The frontend provides a control ring to the backend by setting: * * /local/domain//device/vif//ctrl-ring-ref = * /local/domain//device/vif//event-channel-ctrl = * * where is the grant reference of the shared page used to * implement the control ring and is an event channel to be used * as a mailbox interrupt. These keys must be set before the frontend * moves into the connected state. * * The control ring uses a fixed request/response message size and is * balanced (i.e. one request to one response), so operationally it is much * the same as a transmit or receive ring. * Note that there is no requirement that responses are issued in the same * order as requests. */ /* * Hash types * ========== * * For the purposes of the definitions below, 'Packet[]' is an array of * octets containing an IP packet without options, 'Array[X..Y]' means a * sub-array of 'Array' containing bytes X thru Y inclusive, and '+' is * used to indicate concatenation of arrays. */ /* * A hash calculated over an IP version 4 header as follows: * * Buffer[0..8] = Packet[12..15] (source address) + * Packet[16..19] (destination address) * * Result = Hash(Buffer, 8) */ #define _XEN_NETIF_CTRL_HASH_TYPE_IPV4 0 #define XEN_NETIF_CTRL_HASH_TYPE_IPV4 \ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4) /* * A hash calculated over an IP version 4 header and TCP header as * follows: * * Buffer[0..12] = Packet[12..15] (source address) + * Packet[16..19] (destination address) + * Packet[20..21] (source port) + * Packet[22..23] (destination port) * * Result = Hash(Buffer, 12) */ #define _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP 1 #define XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP \ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP) /* * A hash calculated over an IP version 6 header as follows: * * Buffer[0..32] = Packet[8..23] (source address ) + * Packet[24..39] (destination address) * * Result = Hash(Buffer, 32) */ #define _XEN_NETIF_CTRL_HASH_TYPE_IPV6 2 #define XEN_NETIF_CTRL_HASH_TYPE_IPV6 \ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6) /* * A hash calculated over an IP version 6 header and TCP header as * follows: * * Buffer[0..36] = Packet[8..23] (source address) + * Packet[24..39] (destination address) + * Packet[40..41] (source port) + * Packet[42..43] (destination port) * * Result = Hash(Buffer, 36) */ #define _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP 3 #define XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP \ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP) /* * Hash algorithms * =============== */ #define XEN_NETIF_CTRL_HASH_ALGORITHM_NONE 0 /* * Toeplitz hash: */ #define XEN_NETIF_CTRL_HASH_ALGORITHM_TOEPLITZ 1 /* * This algorithm uses a 'key' as well as the data buffer itself. * (Buffer[] and Key[] are treated as shift-registers where the MSB of * Buffer/Key[0] is considered 'left-most' and the LSB of Buffer/Key[N-1] * is the 'right-most'). * * Value = 0 * For number of bits in Buffer[] * If (left-most bit of Buffer[] is 1) * Value ^= left-most 32 bits of Key[] * Key[] << 1 * Buffer[] << 1 * * The code below is provided for convenience where an operating system * does not already provide an implementation. */ #ifdef XEN_NETIF_DEFINE_TOEPLITZ static uint32_t xen_netif_toeplitz_hash(const uint8_t *key, unsigned int keylen, const uint8_t *buf, unsigned int buflen) { unsigned int keyi, bufi; uint64_t prefix = 0; uint64_t hash = 0; /* Pre-load prefix with the first 8 bytes of the key */ for (keyi = 0; keyi < 8; keyi++) { prefix <<= 8; prefix |= (keyi < keylen) ? key[keyi] : 0; } for (bufi = 0; bufi < buflen; bufi++) { uint8_t byte = buf[bufi]; unsigned int bit; for (bit = 0; bit < 8; bit++) { if (byte & 0x80) hash ^= prefix; prefix <<= 1; byte <<= 1; } /* * 'prefix' has now been left-shifted by 8, so * OR in the next byte. */ prefix |= (keyi < keylen) ? key[keyi] : 0; keyi++; } /* The valid part of the hash is in the upper 32 bits. */ return hash >> 32; } #endif /* XEN_NETIF_DEFINE_TOEPLITZ */ /* * Control requests (struct xen_netif_ctrl_request) * ================================================ * * All requests have the following format: * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * | id | type | data[0] | * +-----+-----+-----+-----+-----+-----+-----+-----+ * | data[1] | data[2] | * +-----+-----+-----+-----+-----------------------+ * * id: the request identifier, echoed in response. * type: the type of request (see below) * data[]: any data associated with the request (determined by type) */ struct xen_netif_ctrl_request { uint16_t id; uint16_t type; #define XEN_NETIF_CTRL_TYPE_INVALID 0 #define XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS 1 #define XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS 2 #define XEN_NETIF_CTRL_TYPE_SET_HASH_KEY 3 #define XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE 4 #define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE 5 #define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING 6 #define XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM 7 uint32_t data[3]; }; /* * Control responses (struct xen_netif_ctrl_response) * ================================================== * * All responses have the following format: * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * | id | type | status | * +-----+-----+-----+-----+-----+-----+-----+-----+ * | data | * +-----+-----+-----+-----+ * * id: the corresponding request identifier * type: the type of the corresponding request * status: the status of request processing * data: any data associated with the response (determined by type and * status) */ struct xen_netif_ctrl_response { uint16_t id; uint16_t type; uint32_t status; #define XEN_NETIF_CTRL_STATUS_SUCCESS 0 #define XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED 1 #define XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER 2 #define XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW 3 uint32_t data; }; /* * Control messages * ================ * * XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM * -------------------------------------- * * This is sent by the frontend to set the desired hash algorithm. * * Request: * * type = XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM * data[0] = a XEN_NETIF_CTRL_HASH_ALGORITHM_* value * data[1] = 0 * data[2] = 0 * * Response: * * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not * supported * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The algorithm is not * supported * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful * * NOTE: Setting data[0] to XEN_NETIF_CTRL_HASH_ALGORITHM_NONE disables * hashing and the backend is free to choose how it steers packets * to queues (which is the default behaviour). * * XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS * ---------------------------------- * * This is sent by the frontend to query the types of hash supported by * the backend. * * Request: * * type = XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS * data[0] = 0 * data[1] = 0 * data[2] = 0 * * Response: * * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful * data = supported hash types (if operation was successful) * * NOTE: A valid hash algorithm must be selected before this operation can * succeed. * * XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS * ---------------------------------- * * This is sent by the frontend to set the types of hash that the backend * should calculate. (See above for hash type definitions). * Note that the 'maximal' type of hash should always be chosen. For * example, if the frontend sets both IPV4 and IPV4_TCP hash types then * the latter hash type should be calculated for any TCP packet and the * former only calculated for non-TCP packets. * * Request: * * type = XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS * data[0] = bitwise OR of XEN_NETIF_CTRL_HASH_TYPE_* values * data[1] = 0 * data[2] = 0 * * Response: * * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not * supported * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - One or more flag * value is invalid or * unsupported * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful * data = 0 * * NOTE: A valid hash algorithm must be selected before this operation can * succeed. * Also, setting data[0] to zero disables hashing and the backend * is free to choose how it steers packets to queues. * * XEN_NETIF_CTRL_TYPE_SET_HASH_KEY * -------------------------------- * * This is sent by the frontend to set the key of the hash if the algorithm * requires it. (See hash algorithms above). * * Request: * * type = XEN_NETIF_CTRL_TYPE_SET_HASH_KEY * data[0] = grant reference of page containing the key (assumed to * start at beginning of grant) * data[1] = size of key in octets * data[2] = 0 * * Response: * * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not * supported * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Key size is invalid * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Key size is larger * than the backend * supports * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful * data = 0 * * NOTE: Any key octets not specified are assumed to be zero (the key * is assumed to be empty by default) and specifying a new key * invalidates any previous key, hence specifying a key size of * zero will clear the key (which ensures that the calculated hash * will always be zero). * The maximum size of key is algorithm and backend specific, but * is also limited by the single grant reference. * The grant reference may be read-only and must remain valid until * the response has been processed. * * XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE * ----------------------------------------- * * This is sent by the frontend to query the maximum size of mapping * table supported by the backend. The size is specified in terms of * table entries. * * Request: * * type = XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE * data[0] = 0 * data[1] = 0 * data[2] = 0 * * Response: * * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful * data = maximum number of entries allowed in the mapping table * (if operation was successful) or zero if a mapping table is * not supported (i.e. hash mapping is done only by modular * arithmetic). * * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE * ------------------------------------- * * This is sent by the frontend to set the actual size of the mapping * table to be used by the backend. The size is specified in terms of * table entries. * Any previous table is invalidated by this message and any new table * is assumed to be zero filled. * * Request: * * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE * data[0] = number of entries in mapping table * data[1] = 0 * data[2] = 0 * * Response: * * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not * supported * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size is invalid * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful * data = 0 * * NOTE: Setting data[0] to 0 means that hash mapping should be done * using modular arithmetic. * * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING * ------------------------------------ * * This is sent by the frontend to set the content of the table mapping * hash value to queue number. The backend should calculate the hash from * the packet header, use it as an index into the table (modulo the size * of the table) and then steer the packet to the queue number found at * that index. * * Request: * * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING * data[0] = grant reference of page containing the mapping (sub-)table * (assumed to start at beginning of grant) * data[1] = size of (sub-)table in entries * data[2] = offset, in entries, of sub-table within overall table * * Response: * * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not * supported * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size or content * is invalid * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Table size is larger * than the backend * supports * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful * data = 0 * * NOTE: The overall table has the following format: * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * | mapping[0] | mapping[1] | * +-----+-----+-----+-----+-----+-----+-----+-----+ * | . | * | . | * | . | * +-----+-----+-----+-----+-----+-----+-----+-----+ * | mapping[N-2] | mapping[N-1] | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * where N is specified by a XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE * message and each mapping must specifies a queue between 0 and * "multi-queue-num-queues" (see above). * The backend may support a mapping table larger than can be * mapped by a single grant reference. Thus sub-tables within a * larger table can be individually set by sending multiple messages * with differing offset values. Specifying a new sub-table does not * invalidate any table data outside that range. * The grant reference may be read-only and must remain valid until * the response has been processed. */ DEFINE_RING_TYPES(xen_netif_ctrl, struct xen_netif_ctrl_request, struct xen_netif_ctrl_response); /* * Guest transmit * ============== * * This is the 'wire' format for transmit (frontend -> backend) packets: * * Fragment 1: xen_netif_tx_request_t - flags = XEN_NETTXF_* * size = total packet size * [Extra 1: xen_netif_extra_info_t] - (only if fragment 1 flags include * XEN_NETTXF_extra_info) * ... * [Extra N: xen_netif_extra_info_t] - (only if extra N-1 flags include * XEN_NETIF_EXTRA_MORE) * ... * Fragment N: xen_netif_tx_request_t - (only if fragment N-1 flags include * XEN_NETTXF_more_data - flags on preceding * extras are not relevant here) * flags = 0 * size = fragment size * * NOTE: * * This format slightly is different from that used for receive * (backend -> frontend) packets. Specifically, in a multi-fragment * packet the actual size of fragment 1 can only be determined by * subtracting the sizes of fragments 2..N from the total packet size. * * Ring slot size is 12 octets, however not all request/response * structs use the full size. * * tx request data (xen_netif_tx_request_t) * ------------------------------------ * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * | grant ref | offset | flags | * +-----+-----+-----+-----+-----+-----+-----+-----+ * | id | size | * +-----+-----+-----+-----+ * * grant ref: Reference to buffer page. * offset: Offset within buffer page. * flags: XEN_NETTXF_*. * id: request identifier, echoed in response. * size: packet size in bytes. * * tx response (xen_netif_tx_response_t) * --------------------------------- * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * | id | status | unused | * +-----+-----+-----+-----+-----+-----+-----+-----+ * | unused | * +-----+-----+-----+-----+ * * id: reflects id in transmit request * status: XEN_NETIF_RSP_* * * Guest receive * ============= * * This is the 'wire' format for receive (backend -> frontend) packets: * * Fragment 1: xen_netif_rx_request_t - flags = XEN_NETRXF_* * size = fragment size * [Extra 1: xen_netif_extra_info_t] - (only if fragment 1 flags include * XEN_NETRXF_extra_info) * ... * [Extra N: xen_netif_extra_info_t] - (only if extra N-1 flags include * XEN_NETIF_EXTRA_MORE) * ... * Fragment N: xen_netif_rx_request_t - (only if fragment N-1 flags include * XEN_NETRXF_more_data - flags on preceding * extras are not relevant here) * flags = 0 * size = fragment size * * NOTE: * * This format slightly is different from that used for transmit * (frontend -> backend) packets. Specifically, in a multi-fragment * packet the size of the packet can only be determined by summing the * sizes of fragments 1..N. * * Ring slot size is 8 octets. * * rx request (xen_netif_rx_request_t) * ------------------------------- * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * | id | pad | gref | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * id: request identifier, echoed in response. * gref: reference to incoming granted frame. * * rx response (xen_netif_rx_response_t) * --------------------------------- * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * | id | offset | flags | status | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * id: reflects id in receive request * offset: offset in page of start of received packet * flags: XEN_NETRXF_* * status: -ve: XEN_NETIF_RSP_*; +ve: Rx'ed pkt size. * * NOTE: Historically, to support GSO on the frontend receive side, Linux * netfront does not make use of the rx response id (because, as * described below, extra info structures overlay the id field). * Instead it assumes that responses always appear in the same ring * slot as their corresponding request. Thus, to maintain * compatibility, backends must make sure this is the case. * * Extra Info * ========== * * Can be present if initial request or response has NET{T,R}XF_extra_info, * or previous extra request has XEN_NETIF_EXTRA_MORE. * * The struct therefore needs to fit into either a tx or rx slot and * is therefore limited to 8 octets. * * NOTE: Because extra info data overlays the usual request/response * structures, there is no id information in the opposite direction. * So, if an extra info overlays an rx response the frontend can * assume that it is in the same ring slot as the request that was * consumed to make the slot available, and the backend must ensure * this assumption is true. * * extra info (xen_netif_extra_info_t) * ------------------------------- * * General format: * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * |type |flags| type specific data | * +-----+-----+-----+-----+-----+-----+-----+-----+ * | padding for tx | * +-----+-----+-----+-----+ * * type: XEN_NETIF_EXTRA_TYPE_* * flags: XEN_NETIF_EXTRA_FLAG_* * padding for tx: present only in the tx case due to 8 octet limit * from rx case. Not shown in type specific entries * below. * * XEN_NETIF_EXTRA_TYPE_GSO: * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * |type |flags| size |type | pad | features | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * type: Must be XEN_NETIF_EXTRA_TYPE_GSO * flags: XEN_NETIF_EXTRA_FLAG_* * size: Maximum payload size of each segment. For example, * for TCP this is just the path MSS. * type: XEN_NETIF_GSO_TYPE_*: This determines the protocol of * the packet and any extra features required to segment the * packet properly. * features: EN_XEN_NETIF_GSO_FEAT_*: This specifies any extra GSO * features required to process this packet, such as ECN * support for TCPv4. * * XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}: * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * |type |flags| addr | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * type: Must be XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL} * flags: XEN_NETIF_EXTRA_FLAG_* * addr: address to add/remove * * XEN_NETIF_EXTRA_TYPE_HASH: * * A backend that supports teoplitz hashing is assumed to accept * this type of extra info in transmit packets. * A frontend that enables hashing is assumed to accept * this type of extra info in receive packets. * * 0 1 2 3 4 5 6 7 octet * +-----+-----+-----+-----+-----+-----+-----+-----+ * |type |flags|htype| alg |LSB ---- value ---- MSB| * +-----+-----+-----+-----+-----+-----+-----+-----+ * * type: Must be XEN_NETIF_EXTRA_TYPE_HASH * flags: XEN_NETIF_EXTRA_FLAG_* * htype: Hash type (one of _XEN_NETIF_CTRL_HASH_TYPE_* - see above) * alg: The algorithm used to calculate the hash (one of * XEN_NETIF_CTRL_HASH_TYPE_ALGORITHM_* - see above) * value: Hash value */ /* Protocol checksum field is blank in the packet (hardware offload)? */ #define _XEN_NETTXF_csum_blank (0) #define XEN_NETTXF_csum_blank (1U<<_XEN_NETTXF_csum_blank) /* Packet data has been validated against protocol checksum. */ #define _XEN_NETTXF_data_validated (1) #define XEN_NETTXF_data_validated (1U<<_XEN_NETTXF_data_validated) /* Packet continues in the next request descriptor. */ #define _XEN_NETTXF_more_data (2) #define XEN_NETTXF_more_data (1U<<_XEN_NETTXF_more_data) /* Packet to be followed by extra descriptor(s). */ #define _XEN_NETTXF_extra_info (3) #define XEN_NETTXF_extra_info (1U<<_XEN_NETTXF_extra_info) #define XEN_NETIF_MAX_TX_SIZE 0xFFFF struct xen_netif_tx_request { grant_ref_t gref; uint16_t offset; uint16_t flags; uint16_t id; uint16_t size; }; /* Types of xen_netif_extra_info descriptors. */ #define XEN_NETIF_EXTRA_TYPE_NONE (0) /* Never used - invalid */ #define XEN_NETIF_EXTRA_TYPE_GSO (1) /* u.gso */ #define XEN_NETIF_EXTRA_TYPE_MCAST_ADD (2) /* u.mcast */ #define XEN_NETIF_EXTRA_TYPE_MCAST_DEL (3) /* u.mcast */ #define XEN_NETIF_EXTRA_TYPE_HASH (4) /* u.hash */ #define XEN_NETIF_EXTRA_TYPE_MAX (5) /* xen_netif_extra_info_t flags. */ #define _XEN_NETIF_EXTRA_FLAG_MORE (0) #define XEN_NETIF_EXTRA_FLAG_MORE (1U<<_XEN_NETIF_EXTRA_FLAG_MORE) /* GSO types */ #define XEN_NETIF_GSO_TYPE_NONE (0) #define XEN_NETIF_GSO_TYPE_TCPV4 (1) #define XEN_NETIF_GSO_TYPE_TCPV6 (2) /* * This structure needs to fit within both xen_netif_tx_request_t and * xen_netif_rx_response_t for compatibility. */ struct xen_netif_extra_info { uint8_t type; uint8_t flags; union { struct { uint16_t size; uint8_t type; uint8_t pad; uint16_t features; } gso; struct { uint8_t addr[6]; } mcast; struct { uint8_t type; uint8_t algorithm; uint8_t value[4]; } hash; uint16_t pad[3]; } u; }; struct xen_netif_tx_response { uint16_t id; int16_t status; }; struct xen_netif_rx_request { uint16_t id; /* Echoed in response message. */ uint16_t pad; grant_ref_t gref; }; /* Packet data has been validated against protocol checksum. */ #define _XEN_NETRXF_data_validated (0) #define XEN_NETRXF_data_validated (1U<<_XEN_NETRXF_data_validated) /* Protocol checksum field is blank in the packet (hardware offload)? */ #define _XEN_NETRXF_csum_blank (1) #define XEN_NETRXF_csum_blank (1U<<_XEN_NETRXF_csum_blank) /* Packet continues in the next request descriptor. */ #define _XEN_NETRXF_more_data (2) #define XEN_NETRXF_more_data (1U<<_XEN_NETRXF_more_data) /* Packet to be followed by extra descriptor(s). */ #define _XEN_NETRXF_extra_info (3) #define XEN_NETRXF_extra_info (1U<<_XEN_NETRXF_extra_info) /* Packet has GSO prefix. Deprecated but included for compatibility */ #define _XEN_NETRXF_gso_prefix (4) #define XEN_NETRXF_gso_prefix (1U<<_XEN_NETRXF_gso_prefix) struct xen_netif_rx_response { uint16_t id; uint16_t offset; uint16_t flags; int16_t status; }; /* * Generate xen_netif ring structures and types. */ DEFINE_RING_TYPES(xen_netif_tx, struct xen_netif_tx_request, struct xen_netif_tx_response); DEFINE_RING_TYPES(xen_netif_rx, struct xen_netif_rx_request, struct xen_netif_rx_response); #define XEN_NETIF_RSP_DROPPED -2 #define XEN_NETIF_RSP_ERROR -1 #define XEN_NETIF_RSP_OKAY 0 /* No response: used for auxiliary requests (e.g., xen_netif_extra_info_t). */ #define XEN_NETIF_RSP_NULL 1 #endif