# SPDX-License-Identifier: GPL-2.0-only menu "Audio support for Texas Instruments SoCs" depends on DMA_OMAP || TI_EDMA || COMPILE_TEST config SND_SOC_TI_EDMA_PCM tristate select SND_SOC_GENERIC_DMAENGINE_PCM config SND_SOC_TI_SDMA_PCM tristate select SND_SOC_GENERIC_DMAENGINE_PCM comment "Texas Instruments DAI support for:" config SND_SOC_DAVINCI_ASP tristate "daVinci Audio Serial Port (ASP) or McBSP support" depends on ARCH_DAVINCI || COMPILE_TEST select SND_SOC_TI_EDMA_PCM help Say Y or M here if you want audio support via daVinci ASP or McBSP. The driver only implements the ASP support which is a subset of daVinci McBSP (w/o the multichannel support). config SND_SOC_DAVINCI_MCASP tristate "Multichannel Audio Serial Port (McASP) support" select SND_SOC_TI_EDMA_PCM select SND_SOC_TI_SDMA_PCM help Say Y or M here if you want to have support for McASP IP found in various Texas Instruments SoCs like: - daVinci devices - Sitara line of SoCs (AM335x, AM438x, etc) - DRA7x devices - Keystone devices config SND_SOC_DAVINCI_VCIF tristate "daVinci Voice Interface (VCIF) support" depends on ARCH_DAVINCI || COMPILE_TEST select SND_SOC_TI_EDMA_PCM help Say Y or M here if you want audio support via daVinci VCIF. config SND_SOC_OMAP_DMIC tristate "Digital Microphone Module (DMIC) support" depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST select SND_SOC_TI_SDMA_PCM help Say Y or M here if you want to have support for DMIC IP found in OMAP4 and OMAP5. config SND_SOC_OMAP_MCBSP tristate "Multichannel Buffered Serial Port (McBSP) support" depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST select SND_SOC_TI_SDMA_PCM help Say Y or M here if you want to have support for McBSP IP found in Texas Instruments OMAP1/2/3/4/5 SoCs. config SND_SOC_OMAP_MCPDM tristate "Multichannel PDM Controller (McPDM) support" depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST select SND_SOC_TI_SDMA_PCM help Say Y or M here if you want to have support for McPDM IP found in OMAP4 and OMAP5. comment "Audio support for boards with Texas Instruments SoCs" config SND_SOC_NOKIA_N810 tristate "SoC Audio support for Nokia N810" depends on MACH_NOKIA_N810 && I2C select SND_SOC_OMAP_MCBSP select SND_SOC_TLV320AIC3X help Say Y or M if you want to add support for SoC audio on Nokia N810. config SND_SOC_NOKIA_RX51 tristate "SoC Audio support for Nokia RX-51" depends on ARCH_OMAP3 && I2C && GPIOLIB select SND_SOC_OMAP_MCBSP select SND_SOC_TLV320AIC3X select SND_SOC_TPA6130A2 help Say Y or M if you want to add support for SoC audio on Nokia RX-51 hardware. This is also known as Nokia N900 product. config SND_SOC_OMAP3_PANDORA tristate "SoC Audio support for OMAP3 Pandora" depends on ARCH_OMAP3 depends on TWL4030_CORE select SND_SOC_OMAP_MCBSP select SND_SOC_TWL4030 help Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora. config SND_SOC_OMAP3_TWL4030 tristate "SoC Audio support for OMAP3 based boards with twl4030 codec" depends on ARCH_OMAP3 || COMPILE_TEST depends on TWL4030_CORE select SND_SOC_OMAP_MCBSP select SND_SOC_TWL4030 help Say Y or M if you want to add support for SoC audio on OMAP3 based boards using twl4030 as codec. This driver currently supports: - Beagleboard or Devkit8000 - Gumstix Overo or CompuLab CM-T35/CM-T3730 - IGEP v2 - OMAP3EVM - SDP3430 - Zoom2 config SND_SOC_OMAP_ABE_TWL6040 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" depends on TWL6040_CORE && COMMON_CLK depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST select SND_SOC_OMAP_DMIC select SND_SOC_OMAP_MCPDM select SND_SOC_TWL6040 help Say Y or M if you want to add support for SoC audio on OMAP boards using ABE and twl6040 codec. This driver currently supports: - SDP4430/Blaze boards - PandaBoard (4430) - PandaBoardES (4460) - OMAP5 uEVM config SND_SOC_OMAP_AMS_DELTA tristate "SoC Audio support for Amstrad E3 (Delta) videophone" depends on MACH_AMS_DELTA && TTY select SND_SOC_OMAP_MCBSP select SND_SOC_CX20442 help Say Y or M if you want to add support for SoC audio device connected to a handset and a speakerphone found on Amstrad E3 (Delta) videophone. Note that in order to get those devices fully supported, you have to build the kernel with standard serial port driver included and configured for at least 4 ports. Then, from userspace, you must load a line discipline #19 on the modem (ttyS3) serial line. The simplest way to achieve this is to install util-linux-ng and use the included ldattach utility. This can be started automatically from udev, a simple rule like this one should do the trick (it does for me): ACTION=="add", KERNEL=="controlC0", \ RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" config SND_SOC_OMAP_HDMI tristate "OMAP4/5 HDMI audio support" depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST select SND_SOC_TI_SDMA_PCM help For HDMI audio to work OMAPDSS HDMI support should be enabled. The hdmi audio driver implements cpu-dai component using the callbacks provided by OMAPDSS and registers the component under DSS HDMI device. Omap-pcm is registered for platform component also under DSS HDMI device. Dummy codec is used as as codec component. The hdmi audio driver implements also the card and registers it under its own platform device. The device for the driver is registered by OMAPDSS hdmi driver. config SND_SOC_OMAP_OSK5912 tristate "SoC Audio support for omap osk5912" depends on MACH_OMAP_OSK && I2C select SND_SOC_OMAP_MCBSP select SND_SOC_TLV320AIC23_I2C help Say Y or M if you want to add support for SoC audio on osk5912. config SND_SOC_DAVINCI_EVM tristate "SoC Audio support for DaVinci EVMs" depends on ARCH_DAVINCI && I2C select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446 select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM select SND_SOC_TLV320AIC3X help Say Y if you want to add support for SoC audio on the following TI DaVinci EVM platforms: - DM355 - DM365 - DM6446 - DM6447 - DM830 - DM850 choice prompt "DM365 codec select" depends on SND_SOC_DAVINCI_EVM depends on MACH_DAVINCI_DM365_EVM config SND_SOC_DM365_AIC3X_CODEC bool "Audio Codec - AIC3101" help Say Y if you want to add support for AIC3101 audio codec config SND_SOC_DM365_VOICE_CODEC bool "Voice Codec - CQ93VC" help Say Y if you want to add support for SoC On-chip voice codec endchoice config SND_SOC_DM365_VOICE_CODEC_MODULE def_tristate y depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC select MFD_DAVINCI_VOICECODEC select SND_SOC_CQ0093VC help The is an internal symbol needed to ensure that the codec and MFD driver can be built as loadable modules if necessary. endmenu