perf-report(1) ============== NAME ---- perf-report - Read perf.data (created by perf record) and display the profile SYNOPSIS -------- [verse] 'perf report' [-i | --input=file] DESCRIPTION ----------- This command displays the performance counter profile information recorded via perf record. OPTIONS ------- -i:: --input=:: Input file name. (default: perf.data unless stdin is a fifo) -v:: --verbose:: Be more verbose. (show symbol address, etc) -n:: --show-nr-samples:: Show the number of samples for each symbol --show-cpu-utilization:: Show sample percentage for different cpu modes. -T:: --threads:: Show per-thread event counters. The input data file should be recorded with -s option. -c:: --comms=:: Only consider symbols in these comms. CSV that understands file://filename entries. This option will affect the percentage of the overhead column. See --percentage for more info. --pid=:: Only show events for given process ID (comma separated list). --tid=:: Only show events for given thread ID (comma separated list). -d:: --dsos=:: Only consider symbols in these dsos. CSV that understands file://filename entries. This option will affect the percentage of the overhead column. See --percentage for more info. -S:: --symbols=:: Only consider these symbols. CSV that understands file://filename entries. This option will affect the percentage of the overhead column. See --percentage for more info. --symbol-filter=:: Only show symbols that match (partially) with this filter. -U:: --hide-unresolved:: Only display entries resolved to a symbol. -s:: --sort=:: Sort histogram entries by given key(s) - multiple keys can be specified in CSV format. Following sort keys are available: pid, comm, dso, symbol, parent, cpu, socket, srcline, weight, local_weight. Each key has following meaning: - comm: command (name) of the task which can be read via /proc//comm - pid: command and tid of the task - dso: name of library or module executed at the time of sample - symbol: name of function executed at the time of sample - parent: name of function matched to the parent regex filter. Unmatched entries are displayed as "[other]". - cpu: cpu number the task ran at the time of sample - socket: processor socket number the task ran at the time of sample - srcline: filename and line number executed at the time of sample. The DWARF debugging info must be provided. - srcfile: file name of the source file of the same. Requires dwarf information. - weight: Event specific weight, e.g. memory latency or transaction abort cost. This is the global weight. - local_weight: Local weight version of the weight above. - transaction: Transaction abort flags. - overhead: Overhead percentage of sample - overhead_sys: Overhead percentage of sample running in system mode - overhead_us: Overhead percentage of sample running in user mode - overhead_guest_sys: Overhead percentage of sample running in system mode on guest machine - overhead_guest_us: Overhead percentage of sample running in user mode on guest machine - sample: Number of sample - period: Raw number of event count of sample By default, comm, dso and symbol keys are used. (i.e. --sort comm,dso,symbol) If --branch-stack option is used, following sort keys are also available: dso_from, dso_to, symbol_from, symbol_to, mispredict. - dso_from: name of library or module branched from - dso_to: name of library or module branched to - symbol_from: name of function branched from - symbol_to: name of function branched to - mispredict: "N" for predicted branch, "Y" for mispredicted branch - in_tx: branch in TSX transaction - abort: TSX transaction abort. - cycles: Cycles in basic block And default sort keys are changed to comm, dso_from, symbol_from, dso_to and symbol_to, see '--branch-stack'. -F:: --fields=:: Specify output field - multiple keys can be specified in CSV format. Following fields are available: overhead, overhead_sys, overhead_us, overhead_children, sample and period. Also it can contain any sort key(s). By default, every sort keys not specified in -F will be appended automatically. If --mem-mode option is used, following sort keys are also available (incompatible with --branch-stack): symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline. - symbol_daddr: name of data symbol being executed on at the time of sample - dso_daddr: name of library or module containing the data being executed on at the time of sample - locked: whether the bus was locked at the time of sample - tlb: type of tlb access for the data at the time of sample - mem: type of memory access for the data at the time of sample - snoop: type of snoop (if any) for the data at the time of sample - dcacheline: the cacheline the data address is on at the time of sample And default sort keys are changed to local_weight, mem, sym, dso, symbol_daddr, dso_daddr, snoop, tlb, locked, see '--mem-mode'. -p:: --parent=:: A regex filter to identify parent. The parent is a caller of this function and searched through the callchain, thus it requires callchain information recorded. The pattern is in the exteneded regex format and defaults to "\^sys_|^do_page_fault", see '--sort parent'. -x:: --exclude-other:: Only display entries with parent-match. -w:: --column-widths=:: Force each column width to the provided list, for large terminal readability. 0 means no limit (default behavior). -t:: --field-separator=:: Use a special separator character and don't pad with spaces, replacing all occurrences of this separator in symbol names (and other output) with a '.' character, that thus it's the only non valid separator. -D:: --dump-raw-trace:: Dump raw trace in ASCII. -g:: --call-graph=:: Display call chains using type, min percent threshold, print limit, call order, sort key and branch. Note that ordering of parameters is not fixed so any parement can be given in an arbitraty order. One exception is the print_limit which should be preceded by threshold. print_type can be either: - flat: single column, linear exposure of call chains. - graph: use a graph tree, displaying absolute overhead rates. (default) - fractal: like graph, but displays relative rates. Each branch of the tree is considered as a new profiled object. - none: disable call chain display. threshold is a percentage value which specifies a minimum percent to be included in the output call graph. Default is 0.5 (%). print_limit is only applied when stdio interface is used. It's to limit number of call graph entries in a single hist entry. Note that it needs to be given after threshold (but not necessarily consecutive). Default is 0 (unlimited). order can be either: - callee: callee based call graph. - caller: inverted caller based call graph. Default is 'caller' when --children is used, otherwise 'callee'. sort_key can be: - function: compare on functions (default) - address: compare on individual code addresses branch can be: - branch: include last branch information in callgraph when available. Usually more convenient to use --branch-history for this. --children:: Accumulate callchain of children to parent entry so that then can show up in the output. The output will have a new "Children" column and will be sorted on the data. It requires callchains are recorded. See the `overhead calculation' section for more details. --max-stack:: Set the stack depth limit when parsing the callchain, anything beyond the specified depth will be ignored. This is a trade-off between information loss and faster processing especially for workloads that can have a very long callchain stack. Note that when using the --itrace option the synthesized callchain size will override this value if the synthesized callchain size is bigger. Default: 127 -G:: --inverted:: alias for inverted caller based call graph. --ignore-callees=:: Ignore callees of the function(s) matching the given regex. This has the effect of collecting the callers of each such function into one place in the call-graph tree. --pretty=:: Pretty printing style. key: normal, raw --stdio:: Use the stdio interface. --tui:: Use the TUI interface, that is integrated with annotate and allows zooming into DSOs or threads, among other features. Use of --tui requires a tty, if one is not present, as when piping to other commands, the stdio interface is used. --gtk:: Use the GTK2 interface. -k:: --vmlinux=:: vmlinux pathname --kallsyms=:: kallsyms pathname -m:: --modules:: Load module symbols. WARNING: This should only be used with -k and a LIVE kernel. -f:: --force:: Don't complain, do it. --symfs=:: Look for files with symbols relative to this directory. -C:: --cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can be provided as a comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. Default is to report samples on all CPUs. -M:: --disassembler-style=:: Set disassembler style for objdump. --source:: Interleave source code with assembly code. Enabled by default, disable with --no-source. --asm-raw:: Show raw instruction encoding of assembly instructions. --show-total-period:: Show a column with the sum of periods. -I:: --show-info:: Display extended information about the perf.data file. This adds information which may be very large and thus may clutter the display. It currently includes: cpu and numa topology of the host system. -b:: --branch-stack:: Use the addresses of sampled taken branches instead of the instruction address to build the histograms. To generate meaningful output, the perf.data file must have been obtained using perf record -b or perf record --branch-filter xxx where xxx is a branch filter option. perf report is able to auto-detect whether a perf.data file contains branch stacks and it will automatically switch to the branch view mode, unless --no-branch-stack is used. --branch-history:: Add the addresses of sampled taken branches to the callstack. This allows to examine the path the program took to each sample. The data collection must have used -b (or -j) and -g. --objdump=:: Path to objdump binary. --group:: Show event group information together. --demangle:: Demangle symbol names to human readable form. It's enabled by default, disable with --no-demangle. --demangle-kernel:: Demangle kernel symbol names to human readable form (for C++ kernels). --mem-mode:: Use the data addresses of samples in addition to instruction addresses to build the histograms. To generate meaningful output, the perf.data file must have been obtained using perf record -d -W and using a special event -e cpu/mem-loads/ or -e cpu/mem-stores/. See 'perf mem' for simpler access. --percent-limit:: Do not show entries which have an overhead under that percent. (Default: 0). --percentage:: Determine how to display the overhead percentage of filtered entries. Filters can be applied by --comms, --dsos and/or --symbols options and Zoom operations on the TUI (thread, dso, etc). "relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied. --header:: Show header information in the perf.data file. This includes various information like hostname, OS and perf version, cpu/mem info, perf command line, event list and so on. Currently only --stdio output supports this feature. --header-only:: Show only perf.data header (forces --stdio). --itrace:: Options for decoding instruction tracing data. The options are: include::itrace.txt[] To disable decoding entirely, use --no-itrace. --full-source-path:: Show the full path for source files for srcline output. --show-ref-call-graph:: When multiple events are sampled, it may not be needed to collect callgraphs for all of them. The sample sites are usually nearby, and it's enough to collect the callgraphs on a reference event. So user can use "call-graph=no" event modifier to disable callgraph for other events to reduce the overhead. However, perf report cannot show callgraphs for the event which disable the callgraph. This option extends the perf report to show reference callgraphs, which collected by reference event, in no callgraph event. --socket-filter:: Only report the samples on the processor socket that match with this filter include::callchain-overhead-calculation.txt[] SEE ALSO -------- linkperf:perf-stat[1], linkperf:perf-annotate[1]