#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # # Setup/topology: # # NS1 NS2 NS3 # veth1 <---> veth2 veth3 <---> veth4 (the top route) # veth5 <---> veth6 veth7 <---> veth8 (the bottom route) # # each vethN gets IPv[4|6]_N address # # IPv*_SRC = IPv*_1 # IPv*_DST = IPv*_4 # # all tests test pings from IPv*_SRC to IPv*_DST # # by default, routes are configured to allow packets to go # IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) # # a GRE device is installed in NS3 with IPv*_GRE, and # NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8 # (the bottom route) # # Tests: # # 1. routes NS2->IPv*_DST are brought down, so the only way a ping # from IP*_SRC to IP*_DST can work is via IPv*_GRE # # 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 # that encaps the packets with an IP/GRE header to route to IPv*_GRE # # ping: SRC->[encap at veth1:egress]->GRE:decap->DST # ping replies go DST->SRC directly # # 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 # that encaps the packets with an IP/GRE header to route to IPv*_GRE # # ping: SRC->[encap at veth2:ingress]->GRE:decap->DST # ping replies go DST->SRC directly if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" echo "FAIL" exit 1 fi readonly NS1="ns1-$(mktemp -u XXXXXX)" readonly NS2="ns2-$(mktemp -u XXXXXX)" readonly NS3="ns3-$(mktemp -u XXXXXX)" readonly IPv4_1="172.16.1.100" readonly IPv4_2="172.16.2.100" readonly IPv4_3="172.16.3.100" readonly IPv4_4="172.16.4.100" readonly IPv4_5="172.16.5.100" readonly IPv4_6="172.16.6.100" readonly IPv4_7="172.16.7.100" readonly IPv4_8="172.16.8.100" readonly IPv4_GRE="172.16.16.100" readonly IPv4_SRC=$IPv4_1 readonly IPv4_DST=$IPv4_4 readonly IPv6_1="fb01::1" readonly IPv6_2="fb02::1" readonly IPv6_3="fb03::1" readonly IPv6_4="fb04::1" readonly IPv6_5="fb05::1" readonly IPv6_6="fb06::1" readonly IPv6_7="fb07::1" readonly IPv6_8="fb08::1" readonly IPv6_GRE="fb10::1" readonly IPv6_SRC=$IPv6_1 readonly IPv6_DST=$IPv6_4 TEST_STATUS=0 TESTS_SUCCEEDED=0 TESTS_FAILED=0 TMPFILE="" process_test_results() { if [[ "${TEST_STATUS}" -eq 0 ]] ; then echo "PASS" TESTS_SUCCEEDED=$((TESTS_SUCCEEDED+1)) else echo "FAIL" TESTS_FAILED=$((TESTS_FAILED+1)) fi } print_test_summary_and_exit() { echo "passed tests: ${TESTS_SUCCEEDED}" echo "failed tests: ${TESTS_FAILED}" if [ "${TESTS_FAILED}" -eq "0" ] ; then exit 0 else exit 1 fi } setup() { set -e # exit on error TEST_STATUS=0 # create devices and namespaces ip netns add "${NS1}" ip netns add "${NS2}" ip netns add "${NS3}" ip link add veth1 type veth peer name veth2 ip link add veth3 type veth peer name veth4 ip link add veth5 type veth peer name veth6 ip link add veth7 type veth peer name veth8 ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1 ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1 ip link set veth1 netns ${NS1} ip link set veth2 netns ${NS2} ip link set veth3 netns ${NS2} ip link set veth4 netns ${NS3} ip link set veth5 netns ${NS1} ip link set veth6 netns ${NS2} ip link set veth7 netns ${NS2} ip link set veth8 netns ${NS3} # configure addesses: the top route (1-2-3-4) ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1 ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2 ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3 ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4 ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1 ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2 ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3 ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4 # configure addresses: the bottom route (5-6-7-8) ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5 ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6 ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7 ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8 ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5 ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6 ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7 ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8 ip -netns ${NS1} link set dev veth1 up ip -netns ${NS2} link set dev veth2 up ip -netns ${NS2} link set dev veth3 up ip -netns ${NS3} link set dev veth4 up ip -netns ${NS1} link set dev veth5 up ip -netns ${NS2} link set dev veth6 up ip -netns ${NS2} link set dev veth7 up ip -netns ${NS3} link set dev veth8 up # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default; # the bottom route to specific bottom addresses # NS1 # top route ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} # go top by default ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} # go top by default # bottom route ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} # NS2 # top route ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 # bottom route ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 # NS3 # top route ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4 ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3} ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3} ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4 ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3} ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3} # bottom route ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8 ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7} ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7} ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8 ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7} ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7} # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 ip -netns ${NS3} link set gre_dev up ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 ip -netns ${NS3} link set gre6_dev up ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} # rp_filter gets confused by what these tests are doing, so disable it ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) sleep 1 # reduce flakiness set +e } cleanup() { if [ -f ${TMPFILE} ] ; then rm ${TMPFILE} fi ip netns del ${NS1} 2> /dev/null ip netns del ${NS2} 2> /dev/null ip netns del ${NS3} 2> /dev/null } trap cleanup EXIT remove_routes_to_gredev() { ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 } add_unreachable_routes_to_gredev() { ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 } test_ping() { local readonly PROTO=$1 local readonly EXPECTED=$2 local RET=0 if [ "${PROTO}" == "IPv4" ] ; then ip netns exec ${NS1} ping -c 1 -W 1 -I ${IPv4_SRC} ${IPv4_DST} 2>&1 > /dev/null RET=$? elif [ "${PROTO}" == "IPv6" ] ; then ip netns exec ${NS1} ping6 -c 1 -W 6 -I ${IPv6_SRC} ${IPv6_DST} 2>&1 > /dev/null RET=$? else echo " test_ping: unknown PROTO: ${PROTO}" TEST_STATUS=1 fi if [ "0" != "${RET}" ]; then RET=1 fi if [ "${EXPECTED}" != "${RET}" ] ; then echo " test_ping failed: expected: ${EXPECTED}; got ${RET}" TEST_STATUS=1 fi } test_gso() { local readonly PROTO=$1 local readonly PKT_SZ=5000 local IP_DST="" : > ${TMPFILE} # trim the capture file # check that nc is present command -v nc >/dev/null 2>&1 || \ { echo >&2 "nc is not available: skipping TSO tests"; return; } # listen on IPv*_DST, capture TCP into $TMPFILE if [ "${PROTO}" == "IPv4" ] ; then IP_DST=${IPv4_DST} ip netns exec ${NS3} bash -c \ "nc -4 -l -s ${IPv4_DST} -p 9000 > ${TMPFILE} &" elif [ "${PROTO}" == "IPv6" ] ; then IP_DST=${IPv6_DST} ip netns exec ${NS3} bash -c \ "nc -6 -l -s ${IPv6_DST} -p 9000 > ${TMPFILE} &" RET=$? else echo " test_gso: unknown PROTO: ${PROTO}" TEST_STATUS=1 fi sleep 1 # let nc start listening # send a packet larger than MTU ip netns exec ${NS1} bash -c \ "dd if=/dev/zero bs=$PKT_SZ count=1 > /dev/tcp/${IP_DST}/9000 2>/dev/null" sleep 2 # let the packet get delivered # verify we received all expected bytes SZ=$(stat -c %s ${TMPFILE}) if [ "$SZ" != "$PKT_SZ" ] ; then echo " test_gso failed: ${PROTO}" TEST_STATUS=1 fi } test_egress() { local readonly ENCAP=$1 echo "starting egress ${ENCAP} encap test" setup # by default, pings work test_ping IPv4 0 test_ping IPv6 0 # remove NS2->DST routes, ping fails ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 test_ping IPv4 1 test_ping IPv6 1 # install replacement routes (LWT/eBPF), pings succeed if [ "${ENCAP}" == "IPv4" ] ; then ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre dev veth1 ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre dev veth1 elif [ "${ENCAP}" == "IPv6" ] ; then ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre6 dev veth1 ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre6 dev veth1 else echo " unknown encap ${ENCAP}" TEST_STATUS=1 fi test_ping IPv4 0 test_ping IPv6 0 test_gso IPv4 test_gso IPv6 # a negative test: remove routes to GRE devices: ping fails remove_routes_to_gredev test_ping IPv4 1 test_ping IPv6 1 # another negative test add_unreachable_routes_to_gredev test_ping IPv4 1 test_ping IPv6 1 cleanup process_test_results } test_ingress() { local readonly ENCAP=$1 echo "starting ingress ${ENCAP} encap test" setup # need to wait a bit for IPv6 to autoconf, otherwise # ping6 sometimes fails with "unable to bind to address" # by default, pings work test_ping IPv4 0 test_ping IPv6 0 # remove NS2->DST routes, pings fail ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 test_ping IPv4 1 test_ping IPv6 1 # install replacement routes (LWT/eBPF), pings succeed if [ "${ENCAP}" == "IPv4" ] ; then ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre dev veth2 ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre dev veth2 elif [ "${ENCAP}" == "IPv6" ] ; then ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre6 dev veth2 ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre6 dev veth2 else echo "FAIL: unknown encap ${ENCAP}" TEST_STATUS=1 fi test_ping IPv4 0 test_ping IPv6 0 # a negative test: remove routes to GRE devices: ping fails remove_routes_to_gredev test_ping IPv4 1 test_ping IPv6 1 # another negative test add_unreachable_routes_to_gredev test_ping IPv4 1 test_ping IPv6 1 cleanup process_test_results } test_egress IPv4 test_egress IPv6 test_ingress IPv4 test_ingress IPv6 print_test_summary_and_exit