#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # This test is for checking IPv4 and IPv6 FIB rules API # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 ret=0 PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} IP="ip -netns testns" RTABLE=100 GW_IP4=192.51.100.2 SRC_IP=192.51.100.3 GW_IP6=2001:db8:1::2 SRC_IP6=2001:db8:1::3 DEV_ADDR=192.51.100.1 DEV_ADDR6=2001:db8:1::1 DEV=dummy0 TESTS="fib_rule6 fib_rule4" log_test() { local rc=$1 local expected=$2 local msg="$3" if [ ${rc} -eq ${expected} ]; then nsuccess=$((nsuccess+1)) printf "\n TEST: %-50s [ OK ]\n" "${msg}" else ret=1 nfail=$((nfail+1)) printf "\n TEST: %-50s [FAIL]\n" "${msg}" if [ "${PAUSE_ON_FAIL}" = "yes" ]; then echo echo "hit enter to continue, 'q' to quit" read a [ "$a" = "q" ] && exit 1 fi fi } log_section() { echo echo "######################################################################" echo "TEST SECTION: $*" echo "######################################################################" } setup() { set -e ip netns add testns $IP link set dev lo up $IP link add dummy0 type dummy $IP link set dev dummy0 up $IP address add $DEV_ADDR/24 dev dummy0 $IP -6 address add $DEV_ADDR6/64 dev dummy0 set +e } cleanup() { $IP link del dev dummy0 &> /dev/null ip netns del testns } fib_check_iproute_support() { ip rule help 2>&1 | grep -q $1 if [ $? -ne 0 ]; then echo "SKIP: iproute2 iprule too old, missing $1 match" return 1 fi ip route get help 2>&1 | grep -q $2 if [ $? -ne 0 ]; then echo "SKIP: iproute2 get route too old, missing $2 match" return 1 fi return 0 } fib_rule6_del() { $IP -6 rule del $1 log_test $? 0 "rule6 del $1" } fib_rule6_del_by_pref() { pref=$($IP -6 rule show $1 table $RTABLE | cut -d ":" -f 1) $IP -6 rule del pref $pref } fib_rule6_test_match_n_redirect() { local match="$1" local getmatch="$2" local description="$3" $IP -6 rule add $match table $RTABLE $IP -6 route get $GW_IP6 $getmatch | grep -q "table $RTABLE" log_test $? 0 "rule6 check: $description" fib_rule6_del_by_pref "$match" log_test $? 0 "rule6 del by pref: $description" } fib_rule6_test_reject() { local match="$1" local rc $IP -6 rule add $match table $RTABLE 2>/dev/null rc=$? log_test $rc 2 "rule6 check: $match" if [ $rc -eq 0 ]; then $IP -6 rule del $match table $RTABLE fi } fib_rule6_test() { local getmatch local match local cnt # setup the fib rule redirect route $IP -6 route add table $RTABLE default via $GW_IP6 dev $DEV onlink match="oif $DEV" fib_rule6_test_match_n_redirect "$match" "$match" "oif redirect to table" match="from $SRC_IP6 iif $DEV" fib_rule6_test_match_n_redirect "$match" "$match" "iif redirect to table" # Reject dsfield (tos) options which have ECN bits set for cnt in $(seq 1 3); do match="dsfield $cnt" fib_rule6_test_reject "$match" done # Don't take ECN bits into account when matching on dsfield match="tos 0x10" for cnt in "0x10" "0x11" "0x12" "0x13"; do # Using option 'tos' instead of 'dsfield' as old iproute2 # versions don't support 'dsfield' in ip rule show. getmatch="tos $cnt" fib_rule6_test_match_n_redirect "$match" "$getmatch" \ "$getmatch redirect to table" done match="fwmark 0x64" getmatch="mark 0x64" fib_rule6_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table" fib_check_iproute_support "uidrange" "uid" if [ $? -eq 0 ]; then match="uidrange 100-100" getmatch="uid 100" fib_rule6_test_match_n_redirect "$match" "$getmatch" "uid redirect to table" fi fib_check_iproute_support "sport" "sport" if [ $? -eq 0 ]; then match="sport 666 dport 777" fib_rule6_test_match_n_redirect "$match" "$match" "sport and dport redirect to table" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto tcp" fib_rule6_test_match_n_redirect "$match" "$match" "ipproto match" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto ipv6-icmp" fib_rule6_test_match_n_redirect "$match" "$match" "ipproto ipv6-icmp match" fi } fib_rule4_del() { $IP rule del $1 log_test $? 0 "del $1" } fib_rule4_del_by_pref() { pref=$($IP rule show $1 table $RTABLE | cut -d ":" -f 1) $IP rule del pref $pref } fib_rule4_test_match_n_redirect() { local match="$1" local getmatch="$2" local description="$3" $IP rule add $match table $RTABLE $IP route get $GW_IP4 $getmatch | grep -q "table $RTABLE" log_test $? 0 "rule4 check: $description" fib_rule4_del_by_pref "$match" log_test $? 0 "rule4 del by pref: $description" } fib_rule4_test_reject() { local match="$1" local rc $IP rule add $match table $RTABLE 2>/dev/null rc=$? log_test $rc 2 "rule4 check: $match" if [ $rc -eq 0 ]; then $IP rule del $match table $RTABLE fi } fib_rule4_test() { local getmatch local match local cnt # setup the fib rule redirect route $IP route add table $RTABLE default via $GW_IP4 dev $DEV onlink match="oif $DEV" fib_rule4_test_match_n_redirect "$match" "$match" "oif redirect to table" # need enable forwarding and disable rp_filter temporarily as all the # addresses are in the same subnet and egress device == ingress device. ip netns exec testns sysctl -qw net.ipv4.ip_forward=1 ip netns exec testns sysctl -qw net.ipv4.conf.$DEV.rp_filter=0 match="from $SRC_IP iif $DEV" fib_rule4_test_match_n_redirect "$match" "$match" "iif redirect to table" ip netns exec testns sysctl -qw net.ipv4.ip_forward=0 # Reject dsfield (tos) options which have ECN bits set for cnt in $(seq 1 3); do match="dsfield $cnt" fib_rule4_test_reject "$match" done # Don't take ECN bits into account when matching on dsfield match="tos 0x10" for cnt in "0x10" "0x11" "0x12" "0x13"; do # Using option 'tos' instead of 'dsfield' as old iproute2 # versions don't support 'dsfield' in ip rule show. getmatch="tos $cnt" fib_rule4_test_match_n_redirect "$match" "$getmatch" \ "$getmatch redirect to table" done match="fwmark 0x64" getmatch="mark 0x64" fib_rule4_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table" fib_check_iproute_support "uidrange" "uid" if [ $? -eq 0 ]; then match="uidrange 100-100" getmatch="uid 100" fib_rule4_test_match_n_redirect "$match" "$getmatch" "uid redirect to table" fi fib_check_iproute_support "sport" "sport" if [ $? -eq 0 ]; then match="sport 666 dport 777" fib_rule4_test_match_n_redirect "$match" "$match" "sport and dport redirect to table" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto tcp" fib_rule4_test_match_n_redirect "$match" "$match" "ipproto tcp match" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto icmp" fib_rule4_test_match_n_redirect "$match" "$match" "ipproto icmp match" fi } run_fibrule_tests() { log_section "IPv4 fib rule" fib_rule4_test log_section "IPv6 fib rule" fib_rule6_test } ################################################################################ # usage usage() { cat < Test(s) to run (default: all) (options: $TESTS) EOF } ################################################################################ # main while getopts ":t:h" opt; do case $opt in t) TESTS=$OPTARG;; h) usage; exit 0;; *) usage; exit 1;; esac done if [ "$(id -u)" -ne 0 ];then echo "SKIP: Need root privileges" exit $ksft_skip fi if [ ! -x "$(command -v ip)" ]; then echo "SKIP: Could not run test without ip tool" exit $ksft_skip fi # start clean cleanup &> /dev/null setup for t in $TESTS do case $t in fib_rule6_test|fib_rule6) fib_rule6_test;; fib_rule4_test|fib_rule4) fib_rule4_test;; help) echo "Test names: $TESTS"; exit 0;; esac done cleanup if [ "$TESTS" != "none" ]; then printf "\nTests passed: %3d\n" ${nsuccess} printf "Tests failed: %3d\n" ${nfail} fi exit $ret