aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
blob: 9988c9d185678a678ca262e9dfdc6b5f09ce30ae (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
 */
#include "sja1105.h"

/* In the dynamic configuration interface, the switch exposes a register-like
 * view of some of the static configuration tables.
 * Many times the field organization of the dynamic tables is abbreviated (not
 * all fields are dynamically reconfigurable) and different from the static
 * ones, but the key reason for having it is that we can spare a switch reset
 * for settings that can be changed dynamically.
 *
 * This file creates a per-switch-family abstraction called
 * struct sja1105_dynamic_table_ops and two operations that work with it:
 * - sja1105_dynamic_config_write
 * - sja1105_dynamic_config_read
 *
 * Compared to the struct sja1105_table_ops from sja1105_static_config.c,
 * the dynamic accessors work with a compound buffer:
 *
 * packed_buf
 *
 * |
 * V
 * +-----------------------------------------+------------------+
 * |              ENTRY BUFFER               |  COMMAND BUFFER  |
 * +-----------------------------------------+------------------+
 *
 * <----------------------- packed_size ------------------------>
 *
 * The ENTRY BUFFER may or may not have the same layout, or size, as its static
 * configuration table entry counterpart. When it does, the same packing
 * function is reused (bar exceptional cases - see
 * sja1105pqrs_dyn_l2_lookup_entry_packing).
 *
 * The reason for the COMMAND BUFFER being at the end is to be able to send
 * a dynamic write command through a single SPI burst. By the time the switch
 * reacts to the command, the ENTRY BUFFER is already populated with the data
 * sent by the core.
 *
 * The COMMAND BUFFER is always SJA1105_SIZE_DYN_CMD bytes (one 32-bit word) in
 * size.
 *
 * Sometimes the ENTRY BUFFER does not really exist (when the number of fields
 * that can be reconfigured is small), then the switch repurposes some of the
 * unused 32 bits of the COMMAND BUFFER to hold ENTRY data.
 *
 * The key members of struct sja1105_dynamic_table_ops are:
 * - .entry_packing: A function that deals with packing an ENTRY structure
 *		     into an SPI buffer, or retrieving an ENTRY structure
 *		     from one.
 *		     The @packed_buf pointer it's given does always point to
 *		     the ENTRY portion of the buffer.
 * - .cmd_packing: A function that deals with packing/unpacking the COMMAND
 *		   structure to/from the SPI buffer.
 *		   It is given the same @packed_buf pointer as .entry_packing,
 *		   so most of the time, the @packed_buf points *behind* the
 *		   COMMAND offset inside the buffer.
 *		   To access the COMMAND portion of the buffer, the function
 *		   knows its correct offset.
 *		   Giving both functions the same pointer is handy because in
 *		   extreme cases (see sja1105pqrs_dyn_l2_lookup_entry_packing)
 *		   the .entry_packing is able to jump to the COMMAND portion,
 *		   or vice-versa (sja1105pqrs_l2_lookup_cmd_packing).
 * - .access: A bitmap of:
 *	OP_READ: Set if the hardware manual marks the ENTRY portion of the
 *		 dynamic configuration table buffer as R (readable) after
 *		 an SPI read command (the switch will populate the buffer).
 *	OP_WRITE: Set if the manual marks the ENTRY portion of the dynamic
 *		  table buffer as W (writable) after an SPI write command
 *		  (the switch will read the fields provided in the buffer).
 *	OP_DEL: Set if the manual says the VALIDENT bit is supported in the
 *		COMMAND portion of this dynamic config buffer (i.e. the
 *		specified entry can be invalidated through a SPI write
 *		command).
 *	OP_SEARCH: Set if the manual says that the index of an entry can
 *		   be retrieved in the COMMAND portion of the buffer based
 *		   on its ENTRY portion, as a result of a SPI write command.
 *		   Only the TCAM-based FDB table on SJA1105 P/Q/R/S supports
 *		   this.
 * - .max_entry_count: The number of entries, counting from zero, that can be
 *		       reconfigured through the dynamic interface. If a static
 *		       table can be reconfigured at all dynamically, this
 *		       number always matches the maximum number of supported
 *		       static entries.
 * - .packed_size: The length in bytes of the compound ENTRY + COMMAND BUFFER.
 *		   Note that sometimes the compound buffer may contain holes in
 *		   it (see sja1105_vlan_lookup_cmd_packing). The @packed_buf is
 *		   contiguous however, so @packed_size includes any unused
 *		   bytes.
 * - .addr: The base SPI address at which the buffer must be written to the
 *	    switch's memory. When looking at the hardware manual, this must
 *	    always match the lowest documented address for the ENTRY, and not
 *	    that of the COMMAND, since the other 32-bit words will follow along
 *	    at the correct addresses.
 */

#define SJA1105_SIZE_DYN_CMD					4

#define SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY			\
	SJA1105_SIZE_DYN_CMD

#define SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD			\
	(SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_L2_LOOKUP_ENTRY)

#define SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD			\
	(SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY)

#define SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD			\
	(SJA1105_SIZE_DYN_CMD + 4 + SJA1105_SIZE_VLAN_LOOKUP_ENTRY)

#define SJA1105_SIZE_L2_FORWARDING_DYN_CMD			\
	(SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_FORWARDING_ENTRY)

#define SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD			\
	(SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY)

#define SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD			\
	(SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY)

#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD			\
	SJA1105_SIZE_DYN_CMD

#define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD			\
	SJA1105_SIZE_DYN_CMD

#define SJA1105_MAX_DYN_CMD_SIZE				\
	SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD

struct sja1105_dyn_cmd {
	bool search;
	u64 valid;
	u64 rdwrset;
	u64 errors;
	u64 valident;
	u64 index;
};

enum sja1105_hostcmd {
	SJA1105_HOSTCMD_SEARCH = 1,
	SJA1105_HOSTCMD_READ = 2,
	SJA1105_HOSTCMD_WRITE = 3,
	SJA1105_HOSTCMD_INVALIDATE = 4,
};

static void
sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				  enum packing_op op)
{
	u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
	const int size = SJA1105_SIZE_DYN_CMD;
	u64 hostcmd;

	sja1105_packing(p, &cmd->valid,    31, 31, size, op);
	sja1105_packing(p, &cmd->rdwrset,  30, 30, size, op);
	sja1105_packing(p, &cmd->errors,   29, 29, size, op);
	sja1105_packing(p, &cmd->valident, 27, 27, size, op);

	/* VALIDENT is supposed to indicate "keep or not", but in SJA1105 E/T,
	 * using it to delete a management route was unsupported. UM10944
	 * said about it:
	 *
	 *   In case of a write access with the MGMTROUTE flag set,
	 *   the flag will be ignored. It will always be found cleared
	 *   for read accesses with the MGMTROUTE flag set.
	 *
	 * SJA1105 P/Q/R/S keeps the same behavior w.r.t. VALIDENT, but there
	 * is now another flag called HOSTCMD which does more stuff (quoting
	 * from UM11040):
	 *
	 *   A write request is accepted only when HOSTCMD is set to write host
	 *   or invalid. A read request is accepted only when HOSTCMD is set to
	 *   search host or read host.
	 *
	 * So it is possible to translate a RDWRSET/VALIDENT combination into
	 * HOSTCMD so that we keep the dynamic command API in place, and
	 * at the same time achieve compatibility with the management route
	 * command structure.
	 */
	if (cmd->rdwrset == SPI_READ) {
		if (cmd->search)
			hostcmd = SJA1105_HOSTCMD_SEARCH;
		else
			hostcmd = SJA1105_HOSTCMD_READ;
	} else {
		/* SPI_WRITE */
		if (cmd->valident)
			hostcmd = SJA1105_HOSTCMD_WRITE;
		else
			hostcmd = SJA1105_HOSTCMD_INVALIDATE;
	}
	sja1105_packing(p, &hostcmd, 25, 23, size, op);

	/* Hack - The hardware takes the 'index' field within
	 * struct sja1105_l2_lookup_entry as the index on which this command
	 * will operate. However it will ignore everything else, so 'index'
	 * is logically part of command but physically part of entry.
	 * Populate the 'index' entry field from within the command callback,
	 * such that our API doesn't need to ask for a full-blown entry
	 * structure when e.g. a delete is requested.
	 */
	sja1105_packing(buf, &cmd->index, 15, 6,
			SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, op);
}

/* The switch is so retarded that it makes our command/entry abstraction
 * crumble apart.
 *
 * On P/Q/R/S, the switch tries to say whether a FDB entry
 * is statically programmed or dynamically learned via a flag called LOCKEDS.
 * The hardware manual says about this fiels:
 *
 *   On write will specify the format of ENTRY.
 *   On read the flag will be found cleared at times the VALID flag is found
 *   set.  The flag will also be found cleared in response to a read having the
 *   MGMTROUTE flag set.  In response to a read with the MGMTROUTE flag
 *   cleared, the flag be set if the most recent access operated on an entry
 *   that was either loaded by configuration or through dynamic reconfiguration
 *   (as opposed to automatically learned entries).
 *
 * The trouble with this flag is that it's part of the *command* to access the
 * dynamic interface, and not part of the *entry* retrieved from it.
 * Otherwise said, for a sja1105_dynamic_config_read, LOCKEDS is supposed to be
 * an output from the switch into the command buffer, and for a
 * sja1105_dynamic_config_write, the switch treats LOCKEDS as an input
 * (hence we can write either static, or automatically learned entries, from
 * the core).
 * But the manual contradicts itself in the last phrase where it says that on
 * read, LOCKEDS will be set to 1 for all FDB entries written through the
 * dynamic interface (therefore, the value of LOCKEDS from the
 * sja1105_dynamic_config_write is not really used for anything, it'll store a
 * 1 anyway).
 * This means you can't really write a FDB entry with LOCKEDS=0 (automatically
 * learned) into the switch, which kind of makes sense.
 * As for reading through the dynamic interface, it doesn't make too much sense
 * to put LOCKEDS into the command, since the switch will inevitably have to
 * ignore it (otherwise a command would be like "read the FDB entry 123, but
 * only if it's dynamically learned" <- well how am I supposed to know?) and
 * just use it as an output buffer for its findings. But guess what... that's
 * what the entry buffer is for!
 * Unfortunately, what really breaks this abstraction is the fact that it
 * wasn't designed having the fact in mind that the switch can output
 * entry-related data as writeback through the command buffer.
 * However, whether a FDB entry is statically or dynamically learned *is* part
 * of the entry and not the command data, no matter what the switch thinks.
 * In order to do that, we'll need to wrap around the
 * sja1105pqrs_l2_lookup_entry_packing from sja1105_static_config.c, and take
 * a peek outside of the caller-supplied @buf (the entry buffer), to reach the
 * command buffer.
 */
static size_t
sja1105pqrs_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr,
					enum packing_op op)
{
	struct sja1105_l2_lookup_entry *entry = entry_ptr;
	u8 *cmd = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
	const int size = SJA1105_SIZE_DYN_CMD;

	sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op);

	return sja1105pqrs_l2_lookup_entry_packing(buf, entry_ptr, op);
}

static void
sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				enum packing_op op)
{
	u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
	const int size = SJA1105_SIZE_DYN_CMD;

	sja1105_packing(p, &cmd->valid,    31, 31, size, op);
	sja1105_packing(p, &cmd->rdwrset,  30, 30, size, op);
	sja1105_packing(p, &cmd->errors,   29, 29, size, op);
	sja1105_packing(p, &cmd->valident, 27, 27, size, op);
	/* Hack - see comments above. */
	sja1105_packing(buf, &cmd->index, 29, 20,
			SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op);
}

static size_t sja1105et_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr,
						    enum packing_op op)
{
	struct sja1105_l2_lookup_entry *entry = entry_ptr;
	u8 *cmd = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
	const int size = SJA1105_SIZE_DYN_CMD;

	sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op);

	return sja1105et_l2_lookup_entry_packing(buf, entry_ptr, op);
}

static void
sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				 enum packing_op op)
{
	u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
	u64 mgmtroute = 1;

	sja1105et_l2_lookup_cmd_packing(buf, cmd, op);
	if (op == PACK)
		sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD);
}

static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr,
						 enum packing_op op)
{
	struct sja1105_mgmt_entry *entry = entry_ptr;
	const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY;

	/* UM10944: To specify if a PTP egress timestamp shall be captured on
	 * each port upon transmission of the frame, the LSB of VLANID in the
	 * ENTRY field provided by the host must be set.
	 * Bit 1 of VLANID then specifies the register where the timestamp for
	 * this port is stored in.
	 */
	sja1105_packing(buf, &entry->tsreg,     85, 85, size, op);
	sja1105_packing(buf, &entry->takets,    84, 84, size, op);
	sja1105_packing(buf, &entry->macaddr,   83, 36, size, op);
	sja1105_packing(buf, &entry->destports, 35, 31, size, op);
	sja1105_packing(buf, &entry->enfport,   30, 30, size, op);
	return size;
}

static void
sja1105pqrs_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				   enum packing_op op)
{
	u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
	u64 mgmtroute = 1;

	sja1105pqrs_l2_lookup_cmd_packing(buf, cmd, op);
	if (op == PACK)
		sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD);
}

static size_t sja1105pqrs_mgmt_route_entry_packing(void *buf, void *entry_ptr,
						   enum packing_op op)
{
	const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
	struct sja1105_mgmt_entry *entry = entry_ptr;

	/* In P/Q/R/S, enfport got renamed to mgmtvalid, but its purpose
	 * is the same (driver uses it to confirm that frame was sent).
	 * So just keep the name from E/T.
	 */
	sja1105_packing(buf, &entry->tsreg,     71, 71, size, op);
	sja1105_packing(buf, &entry->takets,    70, 70, size, op);
	sja1105_packing(buf, &entry->macaddr,   69, 22, size, op);
	sja1105_packing(buf, &entry->destports, 21, 17, size, op);
	sja1105_packing(buf, &entry->enfport,   16, 16, size, op);
	return size;
}

/* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29,
 * and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap
 * between entry (0x2d, 0x2e) and command (0x30).
 */
static void
sja1105_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				enum packing_op op)
{
	u8 *p = buf + SJA1105_SIZE_VLAN_LOOKUP_ENTRY + 4;
	const int size = SJA1105_SIZE_DYN_CMD;

	sja1105_packing(p, &cmd->valid,    31, 31, size, op);
	sja1105_packing(p, &cmd->rdwrset,  30, 30, size, op);
	sja1105_packing(p, &cmd->valident, 27, 27, size, op);
	/* Hack - see comments above, applied for 'vlanid' field of
	 * struct sja1105_vlan_lookup_entry.
	 */
	sja1105_packing(buf, &cmd->index, 38, 27,
			SJA1105_SIZE_VLAN_LOOKUP_ENTRY, op);
}

static void
sja1105_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				  enum packing_op op)
{
	u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY;
	const int size = SJA1105_SIZE_DYN_CMD;

	sja1105_packing(p, &cmd->valid,   31, 31, size, op);
	sja1105_packing(p, &cmd->errors,  30, 30, size, op);
	sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
	sja1105_packing(p, &cmd->index,    4,  0, size, op);
}

static void
sja1105et_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				 enum packing_op op)
{
	const int size = SJA1105_SIZE_DYN_CMD;
	/* Yup, user manual definitions are reversed */
	u8 *reg1 = buf + 4;

	sja1105_packing(reg1, &cmd->valid, 31, 31, size, op);
	sja1105_packing(reg1, &cmd->index, 26, 24, size, op);
}

static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr,
						 enum packing_op op)
{
	const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY;
	struct sja1105_mac_config_entry *entry = entry_ptr;
	/* Yup, user manual definitions are reversed */
	u8 *reg1 = buf + 4;
	u8 *reg2 = buf;

	sja1105_packing(reg1, &entry->speed,     30, 29, size, op);
	sja1105_packing(reg1, &entry->drpdtag,   23, 23, size, op);
	sja1105_packing(reg1, &entry->drpuntag,  22, 22, size, op);
	sja1105_packing(reg1, &entry->retag,     21, 21, size, op);
	sja1105_packing(reg1, &entry->dyn_learn, 20, 20, size, op);
	sja1105_packing(reg1, &entry->egress,    19, 19, size, op);
	sja1105_packing(reg1, &entry->ingress,   18, 18, size, op);
	sja1105_packing(reg1, &entry->ing_mirr,  17, 17, size, op);
	sja1105_packing(reg1, &entry->egr_mirr,  16, 16, size, op);
	sja1105_packing(reg1, &entry->vlanprio,  14, 12, size, op);
	sja1105_packing(reg1, &entry->vlanid,    11,  0, size, op);
	sja1105_packing(reg2, &entry->tp_delin,  31, 16, size, op);
	sja1105_packing(reg2, &entry->tp_delout, 15,  0, size, op);
	/* MAC configuration table entries which can't be reconfigured:
	 * top, base, enabled, ifg, maxage, drpnona664
	 */
	/* Bogus return value, not used anywhere */
	return 0;
}

static void
sja1105pqrs_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				   enum packing_op op)
{
	const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY;
	u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY;

	sja1105_packing(p, &cmd->valid,   31, 31, size, op);
	sja1105_packing(p, &cmd->errors,  30, 30, size, op);
	sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
	sja1105_packing(p, &cmd->index,    2,  0, size, op);
}

static void
sja1105et_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				       enum packing_op op)
{
	sja1105_packing(buf, &cmd->valid, 31, 31,
			SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op);
}

static size_t
sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr,
					 enum packing_op op)
{
	struct sja1105_l2_lookup_params_entry *entry = entry_ptr;

	sja1105_packing(buf, &entry->poly, 7, 0,
			SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op);
	/* Bogus return value, not used anywhere */
	return 0;
}

static void
sja1105et_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
				     enum packing_op op)
{
	const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD;

	sja1105_packing(buf, &cmd->valid,  31, 31, size, op);
	sja1105_packing(buf, &cmd->errors, 30, 30, size, op);
}

static size_t
sja1105et_general_params_entry_packing(void *buf, void *entry_ptr,
				       enum packing_op op)
{
	struct sja1105_general_params_entry *entry = entry_ptr;
	const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD;

	sja1105_packing(buf, &entry->mirr_port, 2, 0, size, op);
	/* Bogus return value, not used anywhere */
	return 0;
}

#define OP_READ		BIT(0)
#define OP_WRITE	BIT(1)
#define OP_DEL		BIT(2)
#define OP_SEARCH	BIT(3)

/* SJA1105E/T: First generation */
struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
	[BLK_IDX_L2_LOOKUP] = {
		.entry_packing = sja1105et_dyn_l2_lookup_entry_packing,
		.cmd_packing = sja1105et_l2_lookup_cmd_packing,
		.access = (OP_READ | OP_WRITE | OP_DEL),
		.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
		.packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD,
		.addr = 0x20,
	},
	[BLK_IDX_MGMT_ROUTE] = {
		.entry_packing = sja1105et_mgmt_route_entry_packing,
		.cmd_packing = sja1105et_mgmt_route_cmd_packing,
		.access = (OP_READ | OP_WRITE),
		.max_entry_count = SJA1105_NUM_PORTS,
		.packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD,
		.addr = 0x20,
	},
	[BLK_IDX_L2_POLICING] = {0},
	[BLK_IDX_VLAN_LOOKUP] = {
		.entry_packing = sja1105_vlan_lookup_entry_packing,
		.cmd_packing = sja1105_vlan_lookup_cmd_packing,
		.access = (OP_WRITE | OP_DEL),
		.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
		.packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD,
		.addr = 0x27,
	},
	[BLK_IDX_L2_FORWARDING] = {
		.entry_packing = sja1105_l2_forwarding_entry_packing,
		.cmd_packing = sja1105_l2_forwarding_cmd_packing,
		.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
		.access = OP_WRITE,
		.packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD,
		.addr = 0x24,
	},
	[BLK_IDX_MAC_CONFIG] = {
		.entry_packing = sja1105et_mac_config_entry_packing,
		.cmd_packing = sja1105et_mac_config_cmd_packing,
		.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
		.access = OP_WRITE,
		.packed_size = SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD,
		.addr = 0x36,
	},
	[BLK_IDX_L2_LOOKUP_PARAMS] = {
		.entry_packing = sja1105et_l2_lookup_params_entry_packing,
		.cmd_packing = sja1105et_l2_lookup_params_cmd_packing,
		.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
		.access = OP_WRITE,
		.packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD,
		.addr = 0x38,
	},
	[BLK_IDX_L2_FORWARDING_PARAMS] = {0},
	[BLK_IDX_AVB_PARAMS] = {0},
	[BLK_IDX_GENERAL_PARAMS] = {
		.entry_packing = sja1105et_general_params_entry_packing,
		.cmd_packing = sja1105et_general_params_cmd_packing,
		.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
		.access = OP_WRITE,
		.packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD,
		.addr = 0x34,
	},
	[BLK_IDX_XMII_PARAMS] = {0},
};

/* SJA1105P/Q/R/S: Second generation */
struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
	[BLK_IDX_L2_LOOKUP] = {
		.entry_packing = sja1105pqrs_dyn_l2_lookup_entry_packing,
		.cmd_packing = sja1105pqrs_l2_lookup_cmd_packing,
		.access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH),
		.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
		.packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD,
		.addr = 0x24,
	},
	[BLK_IDX_MGMT_ROUTE] = {
		.entry_packing = sja1105pqrs_mgmt_route_entry_packing,
		.cmd_packing = sja1105pqrs_mgmt_route_cmd_packing,
		.access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH),
		.max_entry_count = SJA1105_NUM_PORTS,
		.packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD,
		.addr = 0x24,
	},
	[BLK_IDX_L2_POLICING] = {0},
	[BLK_IDX_VLAN_LOOKUP] = {
		.entry_packing = sja1105_vlan_lookup_entry_packing,
		.cmd_packing = sja1105_vlan_lookup_cmd_packing,
		.access = (OP_READ | OP_WRITE | OP_DEL),
		.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
		.packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD,
		.addr = 0x2D,
	},
	[BLK_IDX_L2_FORWARDING] = {
		.entry_packing = sja1105_l2_forwarding_entry_packing,
		.cmd_packing = sja1105_l2_forwarding_cmd_packing,
		.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
		.access = OP_WRITE,
		.packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD,
		.addr = 0x2A,
	},
	[BLK_IDX_MAC_CONFIG] = {
		.entry_packing = sja1105pqrs_mac_config_entry_packing,
		.cmd_packing = sja1105pqrs_mac_config_cmd_packing,
		.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
		.access = (OP_READ | OP_WRITE),
		.packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD,
		.addr = 0x4B,
	},
	[BLK_IDX_L2_LOOKUP_PARAMS] = {
		.entry_packing = sja1105et_l2_lookup_params_entry_packing,
		.cmd_packing = sja1105et_l2_lookup_params_cmd_packing,
		.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
		.access = (OP_READ | OP_WRITE),
		.packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD,
		.addr = 0x38,
	},
	[BLK_IDX_L2_FORWARDING_PARAMS] = {0},
	[BLK_IDX_AVB_PARAMS] = {0},
	[BLK_IDX_GENERAL_PARAMS] = {
		.entry_packing = sja1105et_general_params_entry_packing,
		.cmd_packing = sja1105et_general_params_cmd_packing,
		.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
		.access = OP_WRITE,
		.packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD,
		.addr = 0x34,
	},
	[BLK_IDX_XMII_PARAMS] = {0},
};

/* Provides read access to the settings through the dynamic interface
 * of the switch.
 * @blk_idx	is used as key to select from the sja1105_dynamic_table_ops.
 *		The selection is limited by the hardware in respect to which
 *		configuration blocks can be read through the dynamic interface.
 * @index	is used to retrieve a particular table entry. If negative,
 *		(and if the @blk_idx supports the searching operation) a search
 *		is performed by the @entry parameter.
 * @entry	Type-casted to an unpacked structure that holds a table entry
 *		of the type specified in @blk_idx.
 *		Usually an output argument. If @index is negative, then this
 *		argument is used as input/output: it should be pre-populated
 *		with the element to search for. Entries which support the
 *		search operation will have an "index" field (not the @index
 *		argument to this function) and that is where the found index
 *		will be returned (or left unmodified - thus negative - if not
 *		found).
 */
int sja1105_dynamic_config_read(struct sja1105_private *priv,
				enum sja1105_blk_idx blk_idx,
				int index, void *entry)
{
	const struct sja1105_dynamic_table_ops *ops;
	struct sja1105_dyn_cmd cmd = {0};
	/* SPI payload buffer */
	u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0};
	int retries = 3;
	int rc;

	if (blk_idx >= BLK_IDX_MAX_DYN)
		return -ERANGE;

	ops = &priv->info->dyn_ops[blk_idx];

	if (index >= 0 && index >= ops->max_entry_count)
		return -ERANGE;
	if (index < 0 && !(ops->access & OP_SEARCH))
		return -EOPNOTSUPP;
	if (!(ops->access & OP_READ))
		return -EOPNOTSUPP;
	if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE)
		return -ERANGE;
	if (!ops->cmd_packing)
		return -EOPNOTSUPP;
	if (!ops->entry_packing)
		return -EOPNOTSUPP;

	cmd.valid = true; /* Trigger action on table entry */
	cmd.rdwrset = SPI_READ; /* Action is read */
	if (index < 0) {
		/* Avoid copying a signed negative number to an u64 */
		cmd.index = 0;
		cmd.search = true;
	} else {
		cmd.index = index;
		cmd.search = false;
	}
	cmd.valident = true;
	ops->cmd_packing(packed_buf, &cmd, PACK);

	if (cmd.search)
		ops->entry_packing(packed_buf, entry, PACK);

	/* Send SPI write operation: read config table entry */
	rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr,
					 packed_buf, ops->packed_size);
	if (rc < 0)
		return rc;

	/* Loop until we have confirmation that hardware has finished
	 * processing the command and has cleared the VALID field
	 */
	do {
		memset(packed_buf, 0, ops->packed_size);

		/* Retrieve the read operation's result */
		rc = sja1105_spi_send_packed_buf(priv, SPI_READ, ops->addr,
						 packed_buf, ops->packed_size);
		if (rc < 0)
			return rc;

		cmd = (struct sja1105_dyn_cmd) {0};
		ops->cmd_packing(packed_buf, &cmd, UNPACK);
		/* UM10944: [valident] will always be found cleared
		 * during a read access with MGMTROUTE set.
		 * So don't error out in that case.
		 */
		if (!cmd.valident && blk_idx != BLK_IDX_MGMT_ROUTE)
			return -ENOENT;
		cpu_relax();
	} while (cmd.valid && --retries);

	if (cmd.valid)
		return -ETIMEDOUT;

	/* Don't dereference possibly NULL pointer - maybe caller
	 * only wanted to see whether the entry existed or not.
	 */
	if (entry)
		ops->entry_packing(packed_buf, entry, UNPACK);
	return 0;
}

int sja1105_dynamic_config_write(struct sja1105_private *priv,
				 enum sja1105_blk_idx blk_idx,
				 int index, void *entry, bool keep)
{
	const struct sja1105_dynamic_table_ops *ops;
	struct sja1105_dyn_cmd cmd = {0};
	/* SPI payload buffer */
	u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0};
	int rc;

	if (blk_idx >= BLK_IDX_MAX_DYN)
		return -ERANGE;

	ops = &priv->info->dyn_ops[blk_idx];

	if (index >= ops->max_entry_count)
		return -ERANGE;
	if (index < 0)
		return -ERANGE;
	if (!(ops->access & OP_WRITE))
		return -EOPNOTSUPP;
	if (!keep && !(ops->access & OP_DEL))
		return -EOPNOTSUPP;
	if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE)
		return -ERANGE;

	cmd.valident = keep; /* If false, deletes entry */
	cmd.valid = true; /* Trigger action on table entry */
	cmd.rdwrset = SPI_WRITE; /* Action is write */
	cmd.index = index;

	if (!ops->cmd_packing)
		return -EOPNOTSUPP;
	ops->cmd_packing(packed_buf, &cmd, PACK);

	if (!ops->entry_packing)
		return -EOPNOTSUPP;
	/* Don't dereference potentially NULL pointer if just
	 * deleting a table entry is what was requested. For cases
	 * where 'index' field is physically part of entry structure,
	 * and needed here, we deal with that in the cmd_packing callback.
	 */
	if (keep)
		ops->entry_packing(packed_buf, entry, PACK);

	/* Send SPI write operation: read config table entry */
	rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr,
					 packed_buf, ops->packed_size);
	if (rc < 0)
		return rc;

	cmd = (struct sja1105_dyn_cmd) {0};
	ops->cmd_packing(packed_buf, &cmd, UNPACK);
	if (cmd.errors)
		return -EINVAL;

	return 0;
}

static u8 sja1105_crc8_add(u8 crc, u8 byte, u8 poly)
{
	int i;

	for (i = 0; i < 8; i++) {
		if ((crc ^ byte) & (1 << 7)) {
			crc <<= 1;
			crc ^= poly;
		} else {
			crc <<= 1;
		}
		byte <<= 1;
	}
	return crc;
}

/* CRC8 algorithm with non-reversed input, non-reversed output,
 * no input xor and no output xor. Code customized for receiving
 * the SJA1105 E/T FDB keys (vlanid, macaddr) as input. CRC polynomial
 * is also received as argument in the Koopman notation that the switch
 * hardware stores it in.
 */
u8 sja1105et_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid)
{
	struct sja1105_l2_lookup_params_entry *l2_lookup_params =
		priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS].entries;
	u64 poly_koopman = l2_lookup_params->poly;
	/* Convert polynomial from Koopman to 'normal' notation */
	u8 poly = (u8)(1 + (poly_koopman << 1));
	u64 vlanid = l2_lookup_params->shared_learn ? 0 : vid;
	u64 input = (vlanid << 48) | ether_addr_to_u64(addr);
	u8 crc = 0; /* seed */
	int i;

	/* Mask the eight bytes starting from MSB one at a time */
	for (i = 56; i >= 0; i -= 8) {
		u8 byte = (input & (0xffull << i)) >> i;

		crc = sja1105_crc8_add(crc, byte, poly);
	}
	return crc;
}