path: root/drivers/staging/rdma/hfi1/eprom.c

/*
 * Copyright(c) 2015, 2016 Intel Corporation.
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * BSD LICENSE
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  - Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  - Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  - Neither the name of Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
#include <linux/delay.h>
#include "hfi.h"
#include "common.h"
#include "eprom.h"

/*
 * The EPROM is logically divided into three partitions:
 *	partition 0: the first 128K, visible from PCI ROM BAR
 *	partition 1: 4K config file (sector size)
 *	partition 2: the rest
 */
#define P0_SIZE (128 * 1024)
#define P1_SIZE   (4 * 1024)
#define P1_START P0_SIZE
#define P2_START (P0_SIZE + P1_SIZE)

/* erase sizes supported by the controller */
#define SIZE_4KB (4 * 1024)
#define MASK_4KB (SIZE_4KB - 1)

#define SIZE_32KB (32 * 1024)
#define MASK_32KB (SIZE_32KB - 1)

#define SIZE_64KB (64 * 1024)
#define MASK_64KB (SIZE_64KB - 1)

/* controller page size, in bytes */
#define EP_PAGE_SIZE 256
#define EEP_PAGE_MASK (EP_PAGE_SIZE - 1)

/* controller commands */
#define CMD_SHIFT 24
#define CMD_NOP			    (0)
#define CMD_PAGE_PROGRAM(addr)	    ((0x02 << CMD_SHIFT) | addr)
#define CMD_READ_DATA(addr)	    ((0x03 << CMD_SHIFT) | addr)
#define CMD_READ_SR1		    ((0x05 << CMD_SHIFT))
#define CMD_WRITE_ENABLE	    ((0x06 << CMD_SHIFT))
#define CMD_SECTOR_ERASE_4KB(addr)  ((0x20 << CMD_SHIFT) | addr)
#define CMD_SECTOR_ERASE_32KB(addr) ((0x52 << CMD_SHIFT) | addr)
#define CMD_CHIP_ERASE		    ((0x60 << CMD_SHIFT))
#define CMD_READ_MANUF_DEV_ID	    ((0x90 << CMD_SHIFT))
#define CMD_RELEASE_POWERDOWN_NOID  ((0xab << CMD_SHIFT))
#define CMD_SECTOR_ERASE_64KB(addr) ((0xd8 << CMD_SHIFT) | addr)

/* controller interface speeds */
#define EP_SPEED_FULL 0x2	/* full speed */

/* controller status register 1 bits */
#define SR1_BUSY 0x1ull		/* the BUSY bit in SR1 */

/* sleep length while waiting for controller */
#define WAIT_SLEEP_US 100	/* must be larger than 5 (see usage) */
#define COUNT_DELAY_SEC(n) ((n) * (1000000 / WAIT_SLEEP_US))

/* GPIO pins */
#define EPROM_WP_N BIT_ULL(14)	/* EPROM write line */

/*
 * How long to wait for the EPROM to become available, in ms.
 * The spec 32 Mb EPROM takes around 40s to erase then write.
 * Double it for safety.
 */
#define EPROM_TIMEOUT 80000 /* ms */

/*
 * Turn on external enable line that allows writing on the flash.
 */
static void write_enable(struct hfi1_devdata *dd)
{
	/* raise signal */
	write_csr(dd, ASIC_GPIO_OUT, read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N);
	/* raise enable */
	write_csr(dd, ASIC_GPIO_OE, read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N);
}

/*
 * Turn off external enable line that allows writing on the flash.
 */
static void write_disable(struct hfi1_devdata *dd)
{
	/* lower signal */
	write_csr(dd, ASIC_GPIO_OUT, read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N);
	/* lower enable */
	write_csr(dd, ASIC_GPIO_OE, read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N);
}

/*
 * Wait for the device to become not busy.  Must be called after all
 * write or erase operations.
 */
static int wait_for_not_busy(struct hfi1_devdata *dd)
{
	unsigned long count = 0;
	u64 reg;
	int ret = 0;

	/* starts page mode */
	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_SR1);
	while (1) {
		udelay(WAIT_SLEEP_US);
		usleep_range(WAIT_SLEEP_US - 5, WAIT_SLEEP_US + 5);
		count++;
		reg = read_csr(dd, ASIC_EEP_DATA);
		if ((reg & SR1_BUSY) == 0)
			break;
		/* 200s is the largest time for a 128Mb device */
		if (count > COUNT_DELAY_SEC(200)) {
			dd_dev_err(dd, "waited too long for SPI FLASH busy to clear - failing\n");
			ret = -ETIMEDOUT;
			break; /* break, not goto - must stop page mode */
		}
	}

	/* stop page mode with a NOP */
	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP);

	return ret;
}

/*
 * Read the device ID from the SPI controller.
 */
static u32 read_device_id(struct hfi1_devdata *dd)
{
	/* read the Manufacture Device ID */
	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_MANUF_DEV_ID);
	return (u32)read_csr(dd, ASIC_EEP_DATA);
}

/*
 * Erase the whole flash.
 */
static int erase_chip(struct hfi1_devdata *dd)
{
	int ret;

	write_enable(dd);

	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_CHIP_ERASE);
	ret = wait_for_not_busy(dd);

	write_disable(dd);

	return ret;
}

/*
 * Erase a range.
 */
static int erase_range(struct hfi1_devdata *dd, u32 start, u32 len)
{
	u32 end = start + len;
	int ret = 0;

	if (end < start)
		return -EINVAL;

	/* check the end points for the minimum erase */
	if ((start & MASK_4KB) || (end & MASK_4KB)) {
		dd_dev_err(dd,
			   "%s: non-aligned range (0x%x,0x%x) for a 4KB erase\n",
			   __func__, start, end);
		return -EINVAL;
	}

	write_enable(dd);

	while (start < end) {
		write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
		/* check in order of largest to smallest */
		if (((start & MASK_64KB) == 0) && (start + SIZE_64KB <= end)) {
			write_csr(dd, ASIC_EEP_ADDR_CMD,
				  CMD_SECTOR_ERASE_64KB(start));
			start += SIZE_64KB;
		} else if (((start & MASK_32KB) == 0) &&
			   (start + SIZE_32KB <= end)) {
			write_csr(dd, ASIC_EEP_ADDR_CMD,
				  CMD_SECTOR_ERASE_32KB(start));
			start += SIZE_32KB;
		} else {	/* 4KB will work */
			write_csr(dd, ASIC_EEP_ADDR_CMD,
				  CMD_SECTOR_ERASE_4KB(start));
			start += SIZE_4KB;
		}
		ret = wait_for_not_busy(dd);
		if (ret)
			goto done;
	}

done:
	write_disable(dd);

	return ret;
}

/*
 * Read a 256 byte (64 dword) EPROM page.
 * All callers have verified the offset is at a page boundary.
 */
static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result)
{
	int i;

	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset));
	for (i = 0; i < EP_PAGE_SIZE / sizeof(u32); i++)
		result[i] = (u32)read_csr(dd, ASIC_EEP_DATA);
	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */
}

/*
 * Read length bytes starting at offset.  Copy to user address addr.
 */
static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
{
	u32 offset;
	u32 buffer[EP_PAGE_SIZE / sizeof(u32)];
	int ret = 0;

	/* reject anything not on an EPROM page boundary */
	if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK))
		return -EINVAL;

	for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
		read_page(dd, start + offset, buffer);
		if (copy_to_user((void __user *)(addr + offset),
				 buffer, EP_PAGE_SIZE)) {
			ret = -EFAULT;
			goto done;
		}
	}

done:
	return ret;
}

/*
 * Write a 256 byte (64 dword) EPROM page.
 * All callers have verified the offset is at a page boundary.
 */
static int write_page(struct hfi1_devdata *dd, u32 offset, u32 *data)
{
	int i;

	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
	write_csr(dd, ASIC_EEP_DATA, data[0]);
	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_PAGE_PROGRAM(offset));
	for (i = 1; i < EP_PAGE_SIZE / sizeof(u32); i++)
		write_csr(dd, ASIC_EEP_DATA, data[i]);
	/* will close the open page */
	return wait_for_not_busy(dd);
}

/*
 * Write length bytes starting at offset.  Read from user address addr.
 */
static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
{
	u32 offset;
	u32 buffer[EP_PAGE_SIZE / sizeof(u32)];
	int ret = 0;

	/* reject anything not on an EPROM page boundary */
	if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK))
		return -EINVAL;

	write_enable(dd);

	for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
		if (copy_from_user(buffer, (void __user *)(addr + offset),
				   EP_PAGE_SIZE)) {
			ret = -EFAULT;
			goto done;
		}
		ret = write_page(dd, start + offset, buffer);
		if (ret)
			goto done;
	}

done:
	write_disable(dd);
	return ret;
}

/* convert an range composite to a length, in bytes */
static inline u32 extract_rlen(u32 composite)
{
	return (composite & 0xffff) * EP_PAGE_SIZE;
}

/* convert an range composite to a start, in bytes */
static inline u32 extract_rstart(u32 composite)
{
	return (composite >> 16) * EP_PAGE_SIZE;
}

/*
 * Perform the given operation on the EPROM.  Called from user space.  The
 * user credentials have already been checked.
 *
 * Return 0 on success, -ERRNO on error
 */
int handle_eprom_command(struct file *fp, const struct hfi1_cmd *cmd)
{
	struct hfi1_devdata *dd;
	u32 dev_id;
	u32 rlen;	/* range length */
	u32 rstart;	/* range start */
	int i_minor;
	int ret = 0;

	/*
	 * Map the device file to device data using the relative minor.
	 * The device file minor number is the unit number + 1.  0 is
	 * the generic device file - reject it.
	 */
	i_minor = iminor(file_inode(fp)) - HFI1_USER_MINOR_BASE;
	if (i_minor <= 0)
		return -EINVAL;
	dd = hfi1_lookup(i_minor - 1);
	if (!dd) {
		pr_err("%s: cannot find unit %d!\n", __func__, i_minor);
		return -EINVAL;
	}

	/* some devices do not have an EPROM */
	if (!dd->eprom_available)
		return -EOPNOTSUPP;

	ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT);
	if (ret) {
		dd_dev_err(dd, "%s: unable to acquire EPROM resource\n",
			   __func__);
		goto done_asic;
	}

	dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n",
		    __func__, cmd->type, cmd->len, cmd->addr);

	switch (cmd->type) {
	case HFI1_CMD_EP_INFO:
		if (cmd->len != sizeof(u32)) {
			ret = -ERANGE;
			break;
		}
		dev_id = read_device_id(dd);
		/* addr points to a u32 user buffer */
		if (copy_to_user((void __user *)cmd->addr, &dev_id,
				 sizeof(u32)))
			ret = -EFAULT;
		break;

	case HFI1_CMD_EP_ERASE_CHIP:
		ret = erase_chip(dd);
		break;

	case HFI1_CMD_EP_ERASE_RANGE:
		rlen = extract_rlen(cmd->len);
		rstart = extract_rstart(cmd->len);
		ret = erase_range(dd, rstart, rlen);
		break;

	case HFI1_CMD_EP_READ_RANGE:
		rlen = extract_rlen(cmd->len);
		rstart = extract_rstart(cmd->len);
		ret = read_length(dd, rstart, rlen, cmd->addr);
		break;

	case HFI1_CMD_EP_WRITE_RANGE:
		rlen = extract_rlen(cmd->len);
		rstart = extract_rstart(cmd->len);
		ret = write_length(dd, rstart, rlen, cmd->addr);
		break;

	default:
		dd_dev_err(dd, "%s: unexpected command %d\n",
			   __func__, cmd->type);
		ret = -EINVAL;
		break;
	}

	release_chip_resource(dd, CR_EPROM);
done_asic:
	return ret;
}

/*
 * Initialize the EPROM handler.
 */
int eprom_init(struct hfi1_devdata *dd)
{
	int ret = 0;

	/* only the discrete chip has an EPROM */
	if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0)
		return 0;

	/*
	 * It is OK if both HFIs reset the EPROM as long as they don't
	 * do it at the same time.
	 */
	ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT);
	if (ret) {
		dd_dev_err(dd,
			   "%s: unable to acquire EPROM resource, no EPROM support\n",
			   __func__);
		goto done_asic;
	}

	/* reset EPROM to be sure it is in a good state */

	/* set reset */
	write_csr(dd, ASIC_EEP_CTL_STAT, ASIC_EEP_CTL_STAT_EP_RESET_SMASK);
	/* clear reset, set speed */
	write_csr(dd, ASIC_EEP_CTL_STAT,
		  EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT);

	/* wake the device with command "release powerdown NoID" */
	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID);

	dd->eprom_available = true;
	release_chip_resource(dd, CR_EPROM);
done_asic:
	return ret;
}