path: root/drivers/staging/rtl8192su/r8192S_phyreg.h

/*****************************************************************************
 *	Copyright(c) 2008,  RealTEK Technology Inc. All Right Reserved.
 *
 * Module:	__INC_HAL8192SPHYREG_H
 *
 *
 * Note:	1. Define PMAC/BB register map
 *			2. Define RF register map
 *			3. PMAC/BB register bit mask.
 *			4. RF reg bit mask.
 *			5. Other BB/RF relative definition.
 *
 *
 * Export:	Constants, macro, functions(API), global variables(None).
 *
 * Abbrev:
 *
 * History:
 *		Data		Who		Remark
 *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
 *							2. Reorganize code architecture.
 *	09/25/2008	MH		1. Add RL6052 register definition
 *
 *****************************************************************************/
#ifndef __INC_HAL8192SPHYREG_H
#define __INC_HAL8192SPHYREG_H


/*--------------------------Define Parameters-------------------------------*/

//============================================================
//       8192S Regsiter offset definition
//============================================================

//
// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
// 3. RF register 0x00-2E
// 4. Bit Mask for BB/RF register
// 5. Other defintion for BB/RF R/W
//


//
// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
// 1. Page1(0x100)
//
#define		rPMAC_Reset					0x100
#define		rPMAC_TxStart				0x104
#define		rPMAC_TxLegacySIG			0x108
#define		rPMAC_TxHTSIG1				0x10c
#define		rPMAC_TxHTSIG2				0x110
#define		rPMAC_PHYDebug				0x114
#define		rPMAC_TxPacketNum			0x118
#define		rPMAC_TxIdle					0x11c
#define		rPMAC_TxMACHeader0			0x120
#define		rPMAC_TxMACHeader1			0x124
#define		rPMAC_TxMACHeader2			0x128
#define		rPMAC_TxMACHeader3			0x12c
#define		rPMAC_TxMACHeader4			0x130
#define		rPMAC_TxMACHeader5			0x134
#define		rPMAC_TxDataType			0x138
#define		rPMAC_TxRandomSeed			0x13c
#define		rPMAC_CCKPLCPPreamble		0x140
#define		rPMAC_CCKPLCPHeader		0x144
#define		rPMAC_CCKCRC16				0x148
#define		rPMAC_OFDMRxCRC32OK		0x170
#define		rPMAC_OFDMRxCRC32Er		0x174
#define		rPMAC_OFDMRxParityEr		0x178
#define		rPMAC_OFDMRxCRC8Er		0x17c
#define		rPMAC_CCKCRxRC16Er			0x180
#define		rPMAC_CCKCRxRC32Er			0x184
#define		rPMAC_CCKCRxRC32OK		0x188
#define		rPMAC_TxStatus				0x18c

//
// 2. Page2(0x200)
//
// The following two definition are only used for USB interface.
#define		RF_BB_CMD_ADDR			0x02c0	// RF/BB read/write command address.
#define		RF_BB_CMD_DATA			0x02c4	// RF/BB read/write command data.

//
// 3. Page8(0x800)
//
#define		rFPGA0_RFMOD				0x800	//RF mode & CCK TxSC // RF BW Setting??

#define		rFPGA0_TxInfo				0x804	// Status report??
#define		rFPGA0_PSDFunction			0x808

#define		rFPGA0_TxGainStage			0x80c	// Set TX PWR init gain?

#define		rFPGA0_RFTiming1			0x810	// Useless now
#define		rFPGA0_RFTiming2			0x814
//#define rFPGA0_XC_RFTiming        		0x818
//#define rFPGA0_XD_RFTiming        		0x81c

#define		rFPGA0_XA_HSSIParameter1		0x820	// RF 3 wire register
#define		rFPGA0_XA_HSSIParameter2		0x824
#define		rFPGA0_XB_HSSIParameter1		0x828
#define		rFPGA0_XB_HSSIParameter2		0x82c
#define		rFPGA0_XC_HSSIParameter1		0x830
#define		rFPGA0_XC_HSSIParameter2		0x834
#define		rFPGA0_XD_HSSIParameter1		0x838
#define		rFPGA0_XD_HSSIParameter2		0x83c
#define		rFPGA0_XA_LSSIParameter		0x840
#define		rFPGA0_XB_LSSIParameter		0x844
#define		rFPGA0_XC_LSSIParameter		0x848
#define		rFPGA0_XD_LSSIParameter		0x84c

#define		rFPGA0_RFWakeUpParameter		0x850	// Useless now
#define		rFPGA0_RFSleepUpParameter		0x854

#define		rFPGA0_XAB_SwitchControl		0x858	// RF Channel switch
#define		rFPGA0_XCD_SwitchControl		0x85c

#define		rFPGA0_XA_RFInterfaceOE		0x860	// RF Channel switch
#define		rFPGA0_XB_RFInterfaceOE		0x864
#define		rFPGA0_XC_RFInterfaceOE		0x868
#define		rFPGA0_XD_RFInterfaceOE		0x86c

#define		rFPGA0_XAB_RFInterfaceSW		0x870	// RF Interface Software Control
#define		rFPGA0_XCD_RFInterfaceSW		0x874

#define		rFPGA0_XAB_RFParameter		0x878	// RF Parameter
#define		rFPGA0_XCD_RFParameter		0x87c

#define		rFPGA0_AnalogParameter1		0x880	// Crystal cap setting RF-R/W protection for parameter4??
#define		rFPGA0_AnalogParameter2		0x884
#define		rFPGA0_AnalogParameter3		0x888	// Useless now
#define		rFPGA0_AnalogParameter4		0x88c

#define		rFPGA0_XA_LSSIReadBack		0x8a0	// Tranceiver LSSI Readback
#define		rFPGA0_XB_LSSIReadBack		0x8a4
#define		rFPGA0_XC_LSSIReadBack		0x8a8
#define		rFPGA0_XD_LSSIReadBack		0x8ac

#define		rFPGA0_PSDReport			0x8b4	// Useless now
#define		TransceiverA_HSPI_Readback	0x8b8	// Transceiver A HSPI Readback
#define		TransceiverB_HSPI_Readback	0x8bc	// Transceiver B HSPI Readback
#define		rFPGA0_XAB_RFInterfaceRB	0x8e0	// Useless now // RF Interface Readback Value
#define		rFPGA0_XCD_RFInterfaceRB	0x8e4	// Useless now

//
// 4. Page9(0x900)
//
#define		rFPGA1_RFMOD				0x900	//RF mode & OFDM TxSC // RF BW Setting??

#define		rFPGA1_TxBlock				0x904	// Useless now
#define		rFPGA1_DebugSelect			0x908	// Useless now
#define		rFPGA1_TxInfo				0x90c	// Useless now // Status report??

//
// 5. PageA(0xA00)
//
// Set Control channel to upper or lower. These settings are required only for 40MHz
#define		rCCK0_System				0xa00

#define		rCCK0_AFESetting				0xa04	// Disable init gain now // Select RX path by RSSI
#define		rCCK0_CCA					0xa08	// Disable init gain now // Init gain

#define		rCCK0_RxAGC1				0xa0c 	//AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series
#define		rCCK0_RxAGC2				0xa10 	//AGC & DAGC

#define		rCCK0_RxHP					0xa14

#define		rCCK0_DSPParameter1			0xa18	//Timing recovery & Channel estimation threshold
#define		rCCK0_DSPParameter2			0xa1c	//SQ threshold

#define		rCCK0_TxFilter1				0xa20
#define		rCCK0_TxFilter2				0xa24
#define		rCCK0_DebugPort				0xa28	//debug port and Tx filter3
#define		rCCK0_FalseAlarmReport		0xa2c	//0xa2d	useless now 0xa30-a4f channel report
#define		rCCK0_TRSSIReport         		0xa50
#define		rCCK0_RxReport            		0xa54  //0xa57
#define		rCCK0_FACounterLower      		0xa5c  //0xa5b
#define		rCCK0_FACounterUpper      		0xa58  //0xa5c

//
// 6. PageC(0xC00)
//
#define		rOFDM0_LSTF				0xc00

#define		rOFDM0_TRxPathEnable		0xc04
#define		rOFDM0_TRMuxPar			0xc08
#define		rOFDM0_TRSWIsolation		0xc0c

#define		rOFDM0_XARxAFE				0xc10  //RxIQ DC offset, Rx digital filter, DC notch filter
#define		rOFDM0_XARxIQImbalance    	0xc14  //RxIQ imblance matrix
#define		rOFDM0_XBRxAFE            		0xc18
#define		rOFDM0_XBRxIQImbalance    	0xc1c
#define		rOFDM0_XCRxAFE            		0xc20
#define		rOFDM0_XCRxIQImbalance    	0xc24
#define		rOFDM0_XDRxAFE            		0xc28
#define		rOFDM0_XDRxIQImbalance    	0xc2c

#define		rOFDM0_RxDetector1			0xc30  //PD,BW & SBD	// DM tune init gain
#define		rOFDM0_RxDetector2			0xc34  //SBD & Fame Sync.
#define		rOFDM0_RxDetector3			0xc38  //Frame Sync.
#define		rOFDM0_RxDetector4			0xc3c  //PD, SBD, Frame Sync & Short-GI

#define		rOFDM0_RxDSP				0xc40  //Rx Sync Path
#define		rOFDM0_CFOandDAGC			0xc44  //CFO & DAGC
#define		rOFDM0_CCADropThreshold		0xc48 //CCA Drop threshold
#define		rOFDM0_ECCAThreshold		0xc4c // energy CCA

#define		rOFDM0_XAAGCCore1			0xc50	// DIG
#define		rOFDM0_XAAGCCore2			0xc54
#define		rOFDM0_XBAGCCore1			0xc58
#define		rOFDM0_XBAGCCore2			0xc5c
#define		rOFDM0_XCAGCCore1			0xc60
#define		rOFDM0_XCAGCCore2			0xc64
#define		rOFDM0_XDAGCCore1			0xc68
#define		rOFDM0_XDAGCCore2			0xc6c

#define		rOFDM0_AGCParameter1		0xc70
#define		rOFDM0_AGCParameter2		0xc74
#define		rOFDM0_AGCRSSITable		0xc78
#define		rOFDM0_HTSTFAGC			0xc7c

#define		rOFDM0_XATxIQImbalance		0xc80	// TX PWR TRACK and DIG
#define		rOFDM0_XATxAFE				0xc84
#define		rOFDM0_XBTxIQImbalance		0xc88
#define		rOFDM0_XBTxAFE				0xc8c
#define		rOFDM0_XCTxIQImbalance		0xc90
#define		rOFDM0_XCTxAFE            		0xc94
#define		rOFDM0_XDTxIQImbalance		0xc98
#define		rOFDM0_XDTxAFE				0xc9c

#define		rOFDM0_RxHPParameter		0xce0
#define		rOFDM0_TxPseudoNoiseWgt	0xce4
#define		rOFDM0_FrameSync			0xcf0
#define		rOFDM0_DFSReport			0xcf4
#define		rOFDM0_TxCoeff1				0xca4
#define		rOFDM0_TxCoeff2				0xca8
#define		rOFDM0_TxCoeff3				0xcac
#define		rOFDM0_TxCoeff4				0xcb0
#define		rOFDM0_TxCoeff5				0xcb4
#define		rOFDM0_TxCoeff6				0xcb8


//
// 7. PageD(0xD00)
//
#define		rOFDM1_LSTF				0xd00
#define		rOFDM1_TRxPathEnable		0xd04
#define		rOFDM1_CFO					0xd08	// No setting now
#define		rOFDM1_CSI1				0xd10
#define		rOFDM1_SBD					0xd14
#define		rOFDM1_CSI2				0xd18
#define		rOFDM1_CFOTracking			0xd2c
#define		rOFDM1_TRxMesaure1			0xd34
#define		rOFDM1_IntfDet				0xd3c
#define		rOFDM1_PseudoNoiseStateAB	0xd50
#define		rOFDM1_PseudoNoiseStateCD	0xd54
#define		rOFDM1_RxPseudoNoiseWgt	0xd58

#define		rOFDM_PHYCounter1			0xda0  //cca, parity fail
#define		rOFDM_PHYCounter2			0xda4  //rate illegal, crc8 fail
#define		rOFDM_PHYCounter3			0xda8  //MCS not support
#define		rOFDM_ShortCFOAB			0xdac	// No setting now
#define		rOFDM_ShortCFOCD			0xdb0
#define		rOFDM_LongCFOAB			0xdb4
#define		rOFDM_LongCFOCD			0xdb8
#define		rOFDM_TailCFOAB				0xdbc
#define		rOFDM_TailCFOCD				0xdc0
#define		rOFDM_PWMeasure1          		0xdc4
#define		rOFDM_PWMeasure2          		0xdc8
#define		rOFDM_BWReport				0xdcc
#define		rOFDM_AGCReport				0xdd0
#define		rOFDM_RxSNR				0xdd4
#define		rOFDM_RxEVMCSI				0xdd8
#define		rOFDM_SIGReport				0xddc


//
// 8. PageE(0xE00)
//
#define		rTxAGC_Rate18_06			0xe00
#define		rTxAGC_Rate54_24			0xe04
#define		rTxAGC_CCK_Mcs32			0xe08
#define		rTxAGC_Mcs03_Mcs00			0xe10
#define		rTxAGC_Mcs07_Mcs04			0xe14
#define		rTxAGC_Mcs11_Mcs08			0xe18
#define		rTxAGC_Mcs15_Mcs12			0xe1c

//
// 7. RF Register 0x00-0x2E (RF 8256)
//    RF-0222D 0x00-3F
//
//Zebra1
#define		rZebra1_HSSIEnable			0x0	// Useless now
#define		rZebra1_TRxEnable1			0x1
#define		rZebra1_TRxEnable2			0x2
#define		rZebra1_AGC					0x4
#define		rZebra1_ChargePump			0x5
//#if (RTL92SE_FPGA_VERIFY == 1)
#define		rZebra1_Channel				0x7	// RF channel switch
//#else

//#endif
#define		rZebra1_TxGain				0x8	// Useless now
#define		rZebra1_TxLPF				0x9
#define		rZebra1_RxLPF				0xb
#define		rZebra1_RxHPFCorner			0xc

//Zebra4
#define		rGlobalCtrl					0	// Useless now
#define		rRTL8256_TxLPF				19
#define		rRTL8256_RxLPF				11

//RTL8258
#define		rRTL8258_TxLPF				0x11	// Useless now
#define		rRTL8258_RxLPF				0x13
#define		rRTL8258_RSSILPF			0xa

//
// RL6052 Register definition
//
#define		RF_AC						0x00	//

#define		RF_IQADJ_G1				0x01	//
#define		RF_IQADJ_G2				0x02	//
#define		RF_POW_TRSW				0x05	//

#define		RF_GAIN_RX					0x06	//
#define		RF_GAIN_TX					0x07	//

#define		RF_TXM_IDAC				0x08	//
#define		RF_BS_IQGEN				0x0F	//

#define		RF_MODE1					0x10	//
#define		RF_MODE2					0x11	//

#define		RF_RX_AGC_HP				0x12	//
#define		RF_TX_AGC					0x13	//
#define		RF_BIAS						0x14	//
#define		RF_IPA						0x15	//
#define		RF_POW_ABILITY				0x17	//
#define		RF_MODE_AG					0x18	//
#define		rRfChannel					0x18	// RF channel and BW switch
#define		RF_CHNLBW					0x18	// RF channel and BW switch
#define		RF_TOP						0x19	//

#define		RF_RX_G1					0x1A	//
#define		RF_RX_G2					0x1B	//

#define		RF_RX_BB2					0x1C	//
#define		RF_RX_BB1					0x1D	//

#define		RF_RCK1						0x1E	//
#define		RF_RCK2						0x1F	//

#define		RF_TX_G1					0x20	//
#define		RF_TX_G2					0x21	//
#define		RF_TX_G3					0x22	//

#define		RF_TX_BB1					0x23	//

#define		RF_T_METER					0x24	//

#define		RF_SYN_G1					0x25	// RF TX Power control
#define		RF_SYN_G2					0x26	// RF TX Power control
#define		RF_SYN_G3					0x27	// RF TX Power control
#define		RF_SYN_G4					0x28	// RF TX Power control
#define		RF_SYN_G5					0x29	// RF TX Power control
#define		RF_SYN_G6					0x2A	// RF TX Power control
#define		RF_SYN_G7					0x2B	// RF TX Power control
#define		RF_SYN_G8					0x2C	// RF TX Power control

#define		RF_RCK_OS					0x30	// RF TX PA control

#define		RF_TXPA_G1					0x31	// RF TX PA control
#define		RF_TXPA_G2					0x32	// RF TX PA control
#define		RF_TXPA_G3					0x33	// RF TX PA control

//
//Bit Mask
//
// 1. Page1(0x100)
#define		bBBResetB					0x100	// Useless now?
#define		bGlobalResetB				0x200
#define		bOFDMTxStart				0x4
#define		bCCKTxStart					0x8
#define		bCRC32Debug					0x100
#define		bPMACLoopback				0x10
#define		bTxLSIG						0xffffff
#define		bOFDMTxRate					0xf
#define		bOFDMTxReserved				0x10
#define		bOFDMTxLength				0x1ffe0
#define		bOFDMTxParity				0x20000
#define		bTxHTSIG1					0xffffff
#define		bTxHTMCSRate				0x7f
#define		bTxHTBW					0x80
#define		bTxHTLength					0xffff00
#define		bTxHTSIG2					0xffffff
#define		bTxHTSmoothing				0x1
#define		bTxHTSounding				0x2
#define		bTxHTReserved				0x4
#define		bTxHTAggreation				0x8
#define		bTxHTSTBC					0x30
#define		bTxHTAdvanceCoding			0x40
#define		bTxHTShortGI					0x80
#define		bTxHTNumberHT_LTF			0x300
#define		bTxHTCRC8					0x3fc00
#define		bCounterReset				0x10000
#define		bNumOfOFDMTx				0xffff
#define		bNumOfCCKTx				0xffff0000
#define		bTxIdleInterval				0xffff
#define		bOFDMService				0xffff0000
#define		bTxMACHeader				0xffffffff
#define		bTxDataInit					0xff
#define		bTxHTMode					0x100
#define		bTxDataType					0x30000
#define		bTxRandomSeed				0xffffffff
#define		bCCKTxPreamble				0x1
#define		bCCKTxSFD					0xffff0000
#define		bCCKTxSIG					0xff
#define		bCCKTxService				0xff00
#define		bCCKLengthExt				0x8000
#define		bCCKTxLength				0xffff0000
#define		bCCKTxCRC16				0xffff
#define		bCCKTxStatus					0x1
#define		bOFDMTxStatus				0x2

#define 		IS_BB_REG_OFFSET_92S(_Offset)		((_Offset >= 0x800) && (_Offset <= 0xfff))

// 2. Page8(0x800)
#define		bRFMOD						0x1	// Reg 0x800 rFPGA0_RFMOD
#define		bJapanMode					0x2
#define		bCCKTxSC					0x30
#define		bCCKEn						0x1000000
#define		bOFDMEn					0x2000000

#define		bOFDMRxADCPhase           		0x10000	// Useless now
#define		bOFDMTxDACPhase           		0x40000
#define		bXATxAGC                  			0x3f

#define		bXBTxAGC                  			0xf00	// Reg 80c rFPGA0_TxGainStage
#define		bXCTxAGC                  			0xf000
#define		bXDTxAGC                  			0xf0000

#define		bPAStart                  			0xf0000000	// Useless now
#define		bTRStart                  			0x00f00000
#define		bRFStart                  			0x0000f000
#define		bBBStart                  			0x000000f0
#define		bBBCCKStart               			0x0000000f
#define		bPAEnd                    			0xf          //Reg0x814
#define		bTREnd                    			0x0f000000
#define		bRFEnd                    			0x000f0000
#define		bCCAMask                  			0x000000f0   //T2R
#define		bR2RCCAMask               			0x00000f00
#define		bHSSI_R2TDelay            		0xf8000000
#define		bHSSI_T2RDelay            		0xf80000
#define		bContTxHSSI               			0x400     //chane gain at continue Tx
#define		bIGFromCCK                			0x200
#define		bAGCAddress               			0x3f
#define		bRxHPTx                   			0x7000
#define		bRxHPT2R                  			0x38000
#define		bRxHPCCKIni               			0xc0000
#define		bAGCTxCode                			0xc00000
#define		bAGCRxCode                			0x300000

#define		b3WireDataLength          		0x800	// Reg 0x820~84f rFPGA0_XA_HSSIParameter1
#define		b3WireAddressLength       		0x400

#define		b3WireRFPowerDown         		0x1	// Useless now
//#define bHWSISelect               		0x8
#define		b5GPAPEPolarity           			0x40000000
#define		b2GPAPEPolarity           			0x80000000
#define		bRFSW_TxDefaultAnt        		0x3
#define		bRFSW_TxOptionAnt         		0x30
#define		bRFSW_RxDefaultAnt        		0x300
#define		bRFSW_RxOptionAnt         		0x3000
#define		bRFSI_3WireData           		0x1
#define		bRFSI_3WireClock          		0x2
#define		bRFSI_3WireLoad           		0x4
#define		bRFSI_3WireRW             		0x8
#define		bRFSI_3Wire               			0xf

#define		bRFSI_RFENV               			0x10	// Reg 0x870 rFPGA0_XAB_RFInterfaceSW

#define		bRFSI_TRSW                			0x20	// Useless now
#define		bRFSI_TRSWB               			0x40
#define		bRFSI_ANTSW               			0x100
#define		bRFSI_ANTSWB              		0x200
#define		bRFSI_PAPE                			0x400
#define		bRFSI_PAPE5G              			0x800
#define		bBandSelect               			0x1
#define		bHTSIG2_GI                			0x80
#define		bHTSIG2_Smoothing         		0x01
#define		bHTSIG2_Sounding          		0x02
#define		bHTSIG2_Aggreaton         		0x08
#define		bHTSIG2_STBC              		0x30
#define		bHTSIG2_AdvCoding         		0x40
#define		bHTSIG2_NumOfHTLTF        		0x300
#define		bHTSIG2_CRC8              		0x3fc
#define		bHTSIG1_MCS               			0x7f
#define		bHTSIG1_BandWidth         		0x80
#define		bHTSIG1_HTLength          		0xffff
#define		bLSIG_Rate                			0xf
#define		bLSIG_Reserved            		0x10
#define		bLSIG_Length              			0x1fffe
#define		bLSIG_Parity              			0x20
#define		bCCKRxPhase               		0x4
#define		bLSSIReadAddress          		0x7f800000   // T65 RF
#define		bLSSIReadEdge             		0x80000000   //LSSI "Read" edge signal
#define		bLSSIReadBackData         		0xfffff		// T65 RF
#define		bLSSIReadOKFlag           		0x1000	// Useless now
#define		bCCKSampleRate            		0x8       //0: 44MHz, 1:88MHz
#define		bRegulator0Standby        		0x1
#define		bRegulatorPLLStandby      		0x2
#define		bRegulator1Standby        		0x4
#define		bPLLPowerUp               			0x8
#define		bDPLLPowerUp              		0x10
#define		bDA10PowerUp              		0x20
#define		bAD7PowerUp               			0x200
#define		bDA6PowerUp               			0x2000
#define		bXtalPowerUp              			0x4000
#define		b40MDClkPowerUP           		0x8000
#define		bDA6DebugMode             		0x20000
#define		bDA6Swing                 			0x380000

#define		bADClkPhase               			0x4000000	// Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ

#define		b80MClkDelay              			0x18000000	// Useless
#define		bAFEWatchDogEnable        		0x20000000

#define		bXtalCap01                			0xc0000000	// Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap
#define		bXtalCap23                			0x3
#define		bXtalCap92x					0x0f000000
#define 		bXtalCap                				0x0f000000

#define		bIntDifClkEnable          		0x400	// Useless
#define		bExtSigClkEnable         	 	0x800
#define		bBandgapMbiasPowerUp      	0x10000
#define		bAD11SHGain               		0xc0000
#define		bAD11InputRange           		0x700000
#define		bAD11OPCurrent            		0x3800000
#define		bIPathLoopback            		0x4000000
#define		bQPathLoopback            		0x8000000
#define		bAFELoopback              		0x10000000
#define		bDA10Swing                		0x7e0
#define		bDA10Reverse              		0x800
#define		bDAClkSource              		0x1000
#define		bAD7InputRange            		0x6000
#define		bAD7Gain                  			0x38000
#define		bAD7OutputCMMode          		0x40000
#define		bAD7InputCMMode           		0x380000
#define		bAD7Current               			0xc00000
#define		bRegulatorAdjust          		0x7000000
#define		bAD11PowerUpAtTx          		0x1
#define		bDA10PSAtTx               		0x10
#define		bAD11PowerUpAtRx          		0x100
#define		bDA10PSAtRx               		0x1000
#define		bCCKRxAGCFormat           		0x200
#define		bPSDFFTSamplepPoint       		0xc000
#define		bPSDAverageNum            		0x3000
#define		bIQPathControl            		0xc00
#define		bPSDFreq                  			0x3ff
#define		bPSDAntennaPath           		0x30
#define		bPSDIQSwitch              		0x40
#define		bPSDRxTrigger             		0x400000
#define		bPSDTxTrigger             		0x80000000
#define		bPSDSineToneScale        		0x7f000000
#define		bPSDReport                			0xffff

// 3. Page9(0x900)
#define		bOFDMTxSC                 		0x30000000	// Useless
#define		bCCKTxOn                  			0x1
#define		bOFDMTxOn                 		0x2
#define		bDebugPage                		0xfff  //reset debug page and also HWord, LWord
#define		bDebugItem                		0xff   //reset debug page and LWord
#define		bAntL              	       		0x10
#define		bAntNonHT           	      			0x100
#define		bAntHT1               			0x1000
#define		bAntHT2                   			0x10000
#define		bAntHT1S1                 			0x100000
#define		bAntNonHTS1               		0x1000000

// 4. PageA(0xA00)
#define		bCCKBBMode                		0x3	// Useless
#define		bCCKTxPowerSaving         		0x80
#define		bCCKRxPowerSaving         		0x40

#define		bCCKSideBand              		0x10	// Reg 0xa00 rCCK0_System 20/40 switch

#define		bCCKScramble              		0x8	// Useless
#define		bCCKAntDiversity    		      	0x8000
#define		bCCKCarrierRecovery   	    	0x4000
#define		bCCKTxRate           		     	0x3000
#define		bCCKDCCancel             	 	0x0800
#define		bCCKISICancel             		0x0400
#define		bCCKMatchFilter           		0x0200
#define		bCCKEqualizer             		0x0100
#define		bCCKPreambleDetect       	 	0x800000
#define		bCCKFastFalseCCA          		0x400000
#define		bCCKChEstStart            		0x300000
#define		bCCKCCACount              		0x080000
#define		bCCKcs_lim                			0x070000
#define		bCCKBistMode              		0x80000000
#define		bCCKCCAMask             	  	0x40000000
#define		bCCKTxDACPhase         	   	0x4
#define		bCCKRxADCPhase         	   	0x20000000   //r_rx_clk
#define		bCCKr_cp_mode0         	   	0x0100
#define		bCCKTxDCOffset           	 	0xf0
#define		bCCKRxDCOffset           	 	0xf
#define		bCCKCCAMode              	 	0xc000
#define		bCCKFalseCS_lim           		0x3f00
#define		bCCKCS_ratio              		0xc00000
#define		bCCKCorgBit_sel           		0x300000
#define		bCCKPD_lim                			0x0f0000
#define		bCCKNewCCA                		0x80000000
#define		bCCKRxHPofIG              		0x8000
#define		bCCKRxIG                  			0x7f00
#define		bCCKLNAPolarity           		0x800000
#define		bCCKRx1stGain             		0x7f0000
#define		bCCKRFExtend              		0x20000000 //CCK Rx Iinital gain polarity
#define		bCCKRxAGCSatLevel        	 	0x1f000000
#define		bCCKRxAGCSatCount       	  	0xe0
#define		bCCKRxRFSettle            		0x1f       //AGCsamp_dly
#define		bCCKFixedRxAGC           	 	0x8000
//#define bCCKRxAGCFormat         	 	0x4000   //remove to HSSI register 0x824
#define		bCCKAntennaPolarity      	 	0x2000
#define		bCCKTxFilterType          		0x0c00
#define		bCCKRxAGCReportType   	   	0x0300
#define		bCCKRxDAGCEn              		0x80000000
#define		bCCKRxDAGCPeriod        	  	0x20000000
#define		bCCKRxDAGCSatLevel     	   	0x1f000000
#define		bCCKTimingRecovery       	 	0x800000
#define		bCCKTxC0                  			0x3f0000
#define		bCCKTxC1                  			0x3f000000
#define		bCCKTxC2                  			0x3f
#define		bCCKTxC3                  			0x3f00
#define		bCCKTxC4                  			0x3f0000
#define		bCCKTxC5                  			0x3f000000
#define		bCCKTxC6                  			0x3f
#define		bCCKTxC7                  			0x3f00
#define		bCCKDebugPort             		0xff0000
#define		bCCKDACDebug              		0x0f000000
#define		bCCKFalseAlarmEnable      		0x8000
#define		bCCKFalseAlarmRead        		0x4000
#define		bCCKTRSSI                 			0x7f
#define		bCCKRxAGCReport           		0xfe
#define		bCCKRxReport_AntSel       		0x80000000
#define		bCCKRxReport_MFOff        		0x40000000
#define		bCCKRxRxReport_SQLoss     	0x20000000
#define		bCCKRxReport_Pktloss      		0x10000000
#define		bCCKRxReport_Lockedbit    	0x08000000
#define		bCCKRxReport_RateError    	0x04000000
#define		bCCKRxReport_RxRate       		0x03000000
#define		bCCKRxFACounterLower      	0xff
#define		bCCKRxFACounterUpper      	0xff000000
#define		bCCKRxHPAGCStart          		0xe000
#define		bCCKRxHPAGCFinal          		0x1c00
#define		bCCKRxFalseAlarmEnable    	0x8000
#define		bCCKFACounterFreeze       		0x4000
#define		bCCKTxPathSel             		0x10000000
#define		bCCKDefaultRxPath         		0xc000000
#define		bCCKOptionRxPath          		0x3000000

// 5. PageC(0xC00)
#define		bNumOfSTF                			0x3	// Useless
#define		bShift_L                 			0xc0
#define		bGI_TH                   			0xc
#define		bRxPathA                 			0x1
#define		bRxPathB                 			0x2
#define		bRxPathC                 			0x4
#define		bRxPathD                 			0x8
#define		bTxPathA                 			0x1
#define		bTxPathB                 			0x2
#define		bTxPathC                 			0x4
#define		bTxPathD                 			0x8
#define		bTRSSIFreq               			0x200
#define		bADCBackoff              			0x3000
#define		bDFIRBackoff             			0xc000
#define		bTRSSILatchPhase         		0x10000
#define		bRxIDCOffset             			0xff
#define		bRxQDCOffset             			0xff00
#define		bRxDFIRMode              		0x1800000
#define		bRxDCNFType              		0xe000000
#define		bRXIQImb_A               			0x3ff
#define		bRXIQImb_B               			0xfc00
#define		bRXIQImb_C               			0x3f0000
#define		bRXIQImb_D               			0xffc00000
#define		bDC_dc_Notch             		0x60000
#define		bRxNBINotch              			0x1f000000
#define		bPD_TH                   			0xf
#define		bPD_TH_Opt2              		0xc000
#define		bPWED_TH                 			0x700
#define		bIfMF_Win_L              			0x800
#define		bPD_Option               			0x1000
#define		bMF_Win_L                			0xe000
#define		bBW_Search_L             		0x30000
#define		bwin_enh_L               			0xc0000
#define		bBW_TH                   			0x700000
#define		bED_TH2                  			0x3800000
#define		bBW_option               			0x4000000
#define		bRatio_TH                			0x18000000
#define		bWindow_L                			0xe0000000
#define		bSBD_Option              			0x1
#define		bFrame_TH                			0x1c
#define		bFS_Option               			0x60
#define		bDC_Slope_check          		0x80
#define		bFGuard_Counter_DC_L     		0xe00
#define		bFrame_Weight_Short      		0x7000
#define		bSub_Tune                			0xe00000
#define		bFrame_DC_Length         		0xe000000
#define		bSBD_start_offset        		0x30000000
#define		bFrame_TH_2              		0x7
#define		bFrame_GI2_TH            		0x38
#define		bGI2_Sync_en             		0x40
#define		bSarch_Short_Early       		0x300
#define		bSarch_Short_Late        		0xc00
#define		bSarch_GI2_Late          		0x70000
#define		bCFOAntSum               		0x1
#define		bCFOAcc                  			0x2
#define		bCFOStartOffset          		0xc
#define		bCFOLookBack             		0x70
#define		bCFOSumWeight            		0x80
#define		bDAGCEnable              			0x10000
#define		bTXIQImb_A               			0x3ff
#define		bTXIQImb_B               			0xfc00
#define		bTXIQImb_C               			0x3f0000
#define		bTXIQImb_D               			0xffc00000
#define		bTxIDCOffset             			0xff
#define		bTxQDCOffset             			0xff00
#define		bTxDFIRMode              		0x10000
#define		bTxPesudoNoiseOn         		0x4000000
#define		bTxPesudoNoise_A         		0xff
#define		bTxPesudoNoise_B         		0xff00
#define		bTxPesudoNoise_C         		0xff0000
#define		bTxPesudoNoise_D         		0xff000000
#define		bCCADropOption           		0x20000
#define		bCCADropThres            		0xfff00000
#define		bEDCCA_H                 			0xf
#define		bEDCCA_L                 			0xf0
#define		bLambda_ED               0x300
#define		bRxInitialGain           0x7f
#define		bRxAntDivEn              0x80
#define		bRxAGCAddressForLNA      0x7f00
#define		bRxHighPowerFlow         0x8000
#define		bRxAGCFreezeThres        0xc0000
#define		bRxFreezeStep_AGC1       0x300000
#define		bRxFreezeStep_AGC2       0xc00000
#define		bRxFreezeStep_AGC3       0x3000000
#define		bRxFreezeStep_AGC0       0xc000000
#define		bRxRssi_Cmp_En           0x10000000
#define		bRxQuickAGCEn            0x20000000
#define		bRxAGCFreezeThresMode    0x40000000
#define		bRxOverFlowCheckType     0x80000000
#define		bRxAGCShift              0x7f
#define		bTRSW_Tri_Only           0x80
#define		bPowerThres              0x300
#define		bRxAGCEn                 0x1
#define		bRxAGCTogetherEn         0x2
#define		bRxAGCMin                0x4
#define		bRxHP_Ini                0x7
#define		bRxHP_TRLNA              0x70
#define		bRxHP_RSSI               0x700
#define		bRxHP_BBP1               0x7000
#define		bRxHP_BBP2               0x70000
#define		bRxHP_BBP3               0x700000
#define		bRSSI_H                  0x7f0000     //the threshold for high power
#define		bRSSI_Gen                0x7f000000   //the threshold for ant diversity
#define		bRxSettle_TRSW           0x7
#define		bRxSettle_LNA            0x38
#define		bRxSettle_RSSI           0x1c0
#define		bRxSettle_BBP            0xe00
#define		bRxSettle_RxHP           0x7000
#define		bRxSettle_AntSW_RSSI     0x38000
#define		bRxSettle_AntSW          0xc0000
#define		bRxProcessTime_DAGC      0x300000
#define		bRxSettle_HSSI           0x400000
#define		bRxProcessTime_BBPPW     0x800000
#define		bRxAntennaPowerShift     0x3000000
#define		bRSSITableSelect         0xc000000
#define		bRxHP_Final              0x7000000
#define		bRxHTSettle_BBP          0x7
#define		bRxHTSettle_HSSI         0x8
#define		bRxHTSettle_RxHP         0x70
#define		bRxHTSettle_BBPPW        0x80
#define		bRxHTSettle_Idle         0x300
#define		bRxHTSettle_Reserved     0x1c00
#define		bRxHTRxHPEn              0x8000
#define		bRxHTAGCFreezeThres      0x30000
#define		bRxHTAGCTogetherEn       0x40000
#define		bRxHTAGCMin              0x80000
#define		bRxHTAGCEn               0x100000
#define		bRxHTDAGCEn              0x200000
#define		bRxHTRxHP_BBP            0x1c00000
#define		bRxHTRxHP_Final          0xe0000000
#define		bRxPWRatioTH             0x3
#define		bRxPWRatioEn             0x4
#define		bRxMFHold                0x3800
#define		bRxPD_Delay_TH1          0x38
#define		bRxPD_Delay_TH2          0x1c0
#define		bRxPD_DC_COUNT_MAX       0x600
//#define bRxMF_Hold               0x3800
#define		bRxPD_Delay_TH           0x8000
#define		bRxProcess_Delay         0xf0000
#define		bRxSearchrange_GI2_Early 0x700000
#define		bRxFrame_Guard_Counter_L 0x3800000
#define		bRxSGI_Guard_L           0xc000000
#define		bRxSGI_Search_L          0x30000000
#define		bRxSGI_TH                0xc0000000
#define		bDFSCnt0                 0xff
#define		bDFSCnt1                 0xff00
#define		bDFSFlag                 0xf0000
#define		bMFWeightSum             0x300000
#define		bMinIdxTH                0x7f000000
#define		bDAFormat                0x40000
#define		bTxChEmuEnable           0x01000000
#define		bTRSWIsolation_A         0x7f
#define		bTRSWIsolation_B         0x7f00
#define		bTRSWIsolation_C         0x7f0000
#define		bTRSWIsolation_D         0x7f000000
#define		bExtLNAGain              0x7c00

// 6. PageE(0xE00)
#define		bSTBCEn                  0x4	// Useless
#define		bAntennaMapping          0x10
#define		bNss                     0x20
#define		bCFOAntSumD              0x200
#define		bPHYCounterReset         0x8000000
#define		bCFOReportGet            0x4000000
#define		bOFDMContinueTx          0x10000000
#define		bOFDMSingleCarrier       0x20000000
#define		bOFDMSingleTone          0x40000000
//#define bRxPath1                 0x01
//#define bRxPath2                 0x02
//#define bRxPath3                 0x04
//#define bRxPath4                 0x08
//#define bTxPath1                 0x10
//#define bTxPath2                 0x20
#define		bHTDetect                0x100
#define		bCFOEn                   0x10000
#define		bCFOValue                0xfff00000
#define		bSigTone_Re              0x3f
#define		bSigTone_Im              0x7f00
#define		bCounter_CCA             0xffff
#define		bCounter_ParityFail      0xffff0000
#define		bCounter_RateIllegal     0xffff
#define		bCounter_CRC8Fail        0xffff0000
#define		bCounter_MCSNoSupport    0xffff
#define		bCounter_FastSync        0xffff
#define		bShortCFO                0xfff
#define		bShortCFOTLength         12   //total
#define		bShortCFOFLength         11   //fraction
#define		bLongCFO                 0x7ff
#define		bLongCFOTLength          11
#define		bLongCFOFLength          11
#define		bTailCFO                 0x1fff
#define		bTailCFOTLength          13
#define		bTailCFOFLength          12
#define		bmax_en_pwdB             0xffff
#define		bCC_power_dB             0xffff0000
#define		bnoise_pwdB              0xffff
#define		bPowerMeasTLength        10
#define		bPowerMeasFLength        3
#define		bRx_HT_BW                0x1
#define		bRxSC                    0x6
#define		bRx_HT                   0x8
#define		bNB_intf_det_on          0x1
#define		bIntf_win_len_cfg        0x30
#define		bNB_Intf_TH_cfg          0x1c0
#define		bRFGain                  0x3f
#define		bTableSel                0x40
#define		bTRSW                    0x80
#define		bRxSNR_A                 0xff
#define		bRxSNR_B                 0xff00
#define		bRxSNR_C                 0xff0000
#define		bRxSNR_D                 0xff000000
#define		bSNREVMTLength           8
#define		bSNREVMFLength           1
#define		bCSI1st                  0xff
#define		bCSI2nd                  0xff00
#define		bRxEVM1st                0xff0000
#define		bRxEVM2nd                0xff000000
#define		bSIGEVM                  0xff
#define		bPWDB                    0xff00
#define		bSGIEN                   0x10000

#define		bSFactorQAM1             0xf	// Useless
#define		bSFactorQAM2             0xf0
#define		bSFactorQAM3             0xf00
#define		bSFactorQAM4             0xf000
#define		bSFactorQAM5             0xf0000
#define		bSFactorQAM6             0xf0000
#define		bSFactorQAM7             0xf00000
#define		bSFactorQAM8             0xf000000
#define		bSFactorQAM9             0xf0000000
#define		bCSIScheme               0x100000

#define		bNoiseLvlTopSet          0x3	// Useless
#define		bChSmooth                0x4
#define		bChSmoothCfg1            0x38
#define		bChSmoothCfg2            0x1c0
#define		bChSmoothCfg3            0xe00
#define		bChSmoothCfg4            0x7000
#define		bMRCMode                 0x800000
#define		bTHEVMCfg                0x7000000

#define		bLoopFitType             0x1	// Useless
#define		bUpdCFO                  0x40
#define		bUpdCFOOffData           0x80
#define		bAdvUpdCFO               0x100
#define		bAdvTimeCtrl             0x800
#define		bUpdClko                 0x1000
#define		bFC                      0x6000
#define		bTrackingMode            0x8000
#define		bPhCmpEnable             0x10000
#define		bUpdClkoLTF              0x20000
#define		bComChCFO                0x40000
#define		bCSIEstiMode             0x80000
#define		bAdvUpdEqz               0x100000
#define		bUChCfg                  0x7000000
#define		bUpdEqz                  0x8000000

#define		bTxAGCRate18_06			0x7f7f7f7f	// Useless
#define		bTxAGCRate54_24			0x7f7f7f7f
#define		bTxAGCRateMCS32			0x7f
#define		bTxAGCRateCCK			0x7f00
#define		bTxAGCRateMCS3_MCS0		0x7f7f7f7f
#define		bTxAGCRateMCS7_MCS4		0x7f7f7f7f
#define		bTxAGCRateMCS11_MCS8	0x7f7f7f7f
#define		bTxAGCRateMCS15_MCS12	0x7f7f7f7f

//Rx Pseduo noise
#define		bRxPesudoNoiseOn         0x20000000	// Useless
#define		bRxPesudoNoise_A         0xff
#define		bRxPesudoNoise_B         0xff00
#define		bRxPesudoNoise_C         0xff0000
#define		bRxPesudoNoise_D         0xff000000
#define		bPesudoNoiseState_A      0xffff
#define		bPesudoNoiseState_B      0xffff0000
#define		bPesudoNoiseState_C      0xffff
#define		bPesudoNoiseState_D      0xffff0000

//7. RF Register
//Zebra1
#define		bZebra1_HSSIEnable        0x8		// Useless
#define		bZebra1_TRxControl        0xc00
#define		bZebra1_TRxGainSetting    0x07f
#define		bZebra1_RxCorner          0xc00
#define		bZebra1_TxChargePump      0x38
#define		bZebra1_RxChargePump      0x7
#define		bZebra1_ChannelNum        0xf80
#define		bZebra1_TxLPFBW           0x400
#define		bZebra1_RxLPFBW           0x600

//Zebra4
#define		bRTL8256RegModeCtrl1      0x100	// Useless
#define		bRTL8256RegModeCtrl0      0x40
#define		bRTL8256_TxLPFBW          0x18
#define		bRTL8256_RxLPFBW          0x600

//RTL8258
#define		bRTL8258_TxLPFBW          0xc	// Useless
#define		bRTL8258_RxLPFBW          0xc00
#define		bRTL8258_RSSILPFBW        0xc0


//
// Other Definition
//

//byte endable for sb_write
#define		bByte0                    0x1	// Useless
#define		bByte1                    0x2
#define		bByte2                    0x4
#define		bByte3                    0x8
#define		bWord0                    0x3
#define		bWord1                    0xc
#define		bDWord                    0xf

//for PutRegsetting & GetRegSetting BitMask
#define		bMaskByte0                0xff	// Reg 0xc50 rOFDM0_XAAGCCore~0xC6f
#define		bMaskByte1                0xff00
#define		bMaskByte2                0xff0000
#define		bMaskByte3                0xff000000
#define		bMaskHWord                0xffff0000
#define		bMaskLWord                0x0000ffff
#define		bMaskDWord                0xffffffff

//for PutRFRegsetting & GetRFRegSetting BitMask
#define		bMask12Bits               0xfffff	// RF Reg mask bits
#define		bMask20Bits               0xfffff	// RF Reg mask bits T65 RF
#define 		bRFRegOffsetMask		0xfffff

#define		bEnable                   0x1	// Useless
#define		bDisable                  0x0

#define		LeftAntenna               0x0	// Useless
#define		RightAntenna              0x1

#define		tCheckTxStatus            500   //500ms // Useless
#define		tUpdateRxCounter          100   //100ms

#define		rateCCK     0	// Useless
#define		rateOFDM    1
#define		rateHT      2

//define Register-End
#define		bPMAC_End                 0x1ff	// Useless
#define		bFPGAPHY0_End             0x8ff
#define		bFPGAPHY1_End             0x9ff
#define		bCCKPHY0_End              0xaff
#define		bOFDMPHY0_End             0xcff
#define		bOFDMPHY1_End             0xdff

//define max debug item in each debug page
//#define bMaxItem_FPGA_PHY0        0x9
//#define bMaxItem_FPGA_PHY1        0x3
//#define bMaxItem_PHY_11B          0x16
//#define bMaxItem_OFDM_PHY0        0x29
//#define bMaxItem_OFDM_PHY1        0x0

#define		bPMACControl              0x0		// Useless
#define		bWMACControl              0x1
#define		bWNICControl              0x2

#define		PathA                     0x0	// Useless
#define		PathB                     0x1
#define		PathC                     0x2
#define		PathD                     0x3

/*--------------------------Define Parameters-------------------------------*/


#endif	//__INC_HAL8192SPHYREG_H