Development tree for the kernel CSPRNG https://git.zx2c4.com/linux-rng/atom/Documentation?h=master 2025-12-03T02:20:06Z 2025-12-03T02:20:06Z Linus Torvalds torvalds@linux-foundation.org 2025-12-03T02:20:06Z urn:sha1:db425f7a0b158d0dbb07c4f4653795aaad3a7a15 Pull crypto library test updates from Eric Biggers: - Add KUnit test suites for SHA-3, BLAKE2b, and POLYVAL. These are the algorithms that have new crypto library interfaces this cycle. - Remove the crypto_shash POLYVAL tests. They're no longer needed because POLYVAL support was removed from crypto_shash. Better POLYVAL test coverage is now provided via the KUnit test suite. * tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: crypto: testmgr - Remove polyval tests lib/crypto: tests: Add KUnit tests for POLYVAL lib/crypto: tests: Add additional SHAKE tests lib/crypto: tests: Add SHA3 kunit tests lib/crypto: tests: Add KUnit tests for BLAKE2b 2025-12-03T02:01:03Z Linus Torvalds torvalds@linux-foundation.org 2025-12-03T02:01:03Z urn:sha1:5abe8d8efc022cc78b6273d01e4a453242b9f4d8 Pull crypto library updates from Eric Biggers: "This is the main crypto library pull request for 6.19. It includes: - Add SHA-3 support to lib/crypto/, including support for both the hash functions and the extendable-output functions. Reimplement the existing SHA-3 crypto_shash support on top of the library. This is motivated mainly by the upcoming support for the ML-DSA signature algorithm, which needs the SHAKE128 and SHAKE256 functions. But even on its own it's a useful cleanup. This also fixes the longstanding issue where the architecture-optimized SHA-3 code was disabled by default. - Add BLAKE2b support to lib/crypto/, and reimplement the existing BLAKE2b crypto_shash support on top of the library. This is motivated mainly by btrfs, which supports BLAKE2b checksums. With this change, all btrfs checksum algorithms now have library APIs. btrfs is planned to start just using the library directly. This refactor also improves consistency between the BLAKE2b code and BLAKE2s code. And as usual, it also fixes the issue where the architecture-optimized BLAKE2b code was disabled by default. - Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL support in crypto_shash. Reimplement HCTR2 on top of the library. This simplifies the code and improves HCTR2 performance. As usual, it also makes the architecture-optimized code be enabled by default. The generic implementation of POLYVAL is greatly improved as well. - Clean up the BLAKE2s code - Add FIPS self-tests for SHA-1, SHA-2, and SHA-3" * tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits) fscrypt: Drop obsolete recommendation to enable optimized POLYVAL crypto: polyval - Remove the polyval crypto_shash crypto: hctr2 - Convert to use POLYVAL library lib/crypto: x86/polyval: Migrate optimized code into library lib/crypto: arm64/polyval: Migrate optimized code into library lib/crypto: polyval: Add POLYVAL library crypto: polyval - Rename conflicting functions lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value lib/crypto: x86/blake2s: Improve readability lib/crypto: x86/blake2s: Use local labels for data lib/crypto: x86/blake2s: Drop check for nblocks == 0 lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit lib/crypto: arm, arm64: Drop filenames from file comments lib/crypto: arm/blake2s: Fix some comments crypto: s390/sha3 - Remove superseded SHA-3 code crypto: sha3 - Reimplement using library API crypto: jitterentropy - Use default sha3 implementation lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions lib/crypto: sha3: Support arch overrides of one-shot digest functions ... 2025-12-03T01:49:12Z Linus Torvalds torvalds@linux-foundation.org 2025-12-03T01:49:12Z urn:sha1:619f4edc8d4f785dcabf564786e787fa8108deb4 Pull thermal control updates from Rafael Wysocki: "These add Nova Lake processor support to the Intel thermal drivers and DPTF code, update thermal control documentation, simplify the ACPI DPTF code related to thermal control, add QCS8300 compatible to the tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal module and add support for it to the imx91 thermal driver, update a few other thermal drivers and fix a format string issue in a thermal utility: - Add Nova Lake processor thermal device to the int340x processor_thermal driver, add DLVR support for Nova Lake to it, add Nova Lake support to the ACPI DPTF code, document thermal throttling on Intel platforms, and update workload type hint interface documentation (Srinivas Pandruvada) - Remove int340x thermal scan handler from the ACPI DPTF code because it turned out to be unnecessary (Slawomir Rosek) - Clean up the Intel int340x thermal driver (Kaushlendra Kumar) - Document the RZ/V2H TSU DT bindings (Ovidiu Panait) - Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu Pallikunhi) - Document R-Car Gen4 and RZ/G2 support in driver comment (Marek Vasut) - Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert Uytterhoeven) - Fix format string bug in thermal-engine (Malaya Kumar Rout) - Make ipq5018 tsens standalone compatible (George Moussalem) - Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli) - Add support for the NXP i.MX91 thermal module, including the DT bindings (Pengfei Li)" * tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module dt-bindings: thermal: tsens: Add QCS8300 compatible dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible tools/thermal/thermal-engine: Fix format string bug in thermal-engine docs: driver-api/thermal/intel_dptf: Add new workload type hint thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS() thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS() Documentation: thermal: Document thermal throttling on Intel platforms ACPI: DPTF: Support Nova Lake thermal: intel: int340x: Add DLVR support for Nova Lake thermal: int340x: processor_thermal: Add Nova Lake processor thermal device thermal: intel: int340x: Replace sprintf() with sysfs_emit() thermal: intel: int340x: Use symbolic constant for UUID comparison thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU ACPI: DPTF: Remove int340x thermal scan handler thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL 2025-12-03T01:31:22Z Linus Torvalds torvalds@linux-foundation.org 2025-12-03T01:31:22Z urn:sha1:d348c22394ad3c8eaf7bc693cb0ca0edc2ec5246 Pull power management updates from Rafael Wysocki: "There are quite a few interesting things here, including new hardware support, new features, some bug fixes and documentation updates. In addition, there are a usual bunch of minor fixes and cleanups all over. In the new hardware support category, there are intel_pstate and intel_rapl driver updates to support new processors, Panther Lake, Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and bandwidth allocation support in the tegra186 cpufreq driver, and JH7110S SOC support in dt-platdev cpufreq. The new features are the PM QoS CPU latency limit for suspend-to-idle, the netlink support for the energy model management, support for terminating system suspend via a wakeup event during the sync of file systems, configurable number of hibernation compression threads, the runtime PM auto-cleanup macros, and the "poweroff" PM event that is expected to be used during system shutdown. Bugs are mostly fixed in cpuidle governors, but there are also fixes elsewhere, like in the amd-pstate cpufreq driver. Documentation updates include, but are not limited to, a new doc on debugging shutdown hangs, cross-referencing fixes and cleanups in the intel_pstate documentation, and updates of comments in the core hibernation code. Specifics: - Introduce and document a QoS limit on CPU exit latency during wakeup from suspend-to-idle (Ulf Hansson) - Add support for building libcpupower statically (Zuo An) - Add support for sending netlink notifications to user space on energy model updates (Changwoo Mini, Peng Fan) - Minor improvements to the Rust OPP interface (Tamir Duberstein) - Fixes to scope-based pointers in the OPP library (Viresh Kumar) - Use residency threshold in polling state override decisions in the menu cpuidle governor (Aboorva Devarajan) - Add sanity check for exit latency and target residency in the cpufreq core (Rafael Wysocki) - Use this_cpu_ptr() where possible in the teo governor (Christian Loehle) - Rework the handling of tick wakeups in the teo cpuidle governor to increase the likelihood of stopping the scheduler tick in the cases when tick wakeups can be counted as non-timer ones (Rafael Wysocki) - Fix a reverse condition in the teo cpuidle governor and drop a misguided target residency check from it (Rafael Wysocki) - Clean up multiple minor defects in the teo cpuidle governor (Rafael Wysocki) - Update header inclusion to make it follow the Include What You Use principle (Andy Shevchenko) - Enable MSR-based RAPL PMU support in the intel_rapl power capping driver and arrange for using it on the Panther Lake and Wildcat Lake processors (Kuppuswamy Sathyanarayanan) - Add support for Nova Lake and Wildcat Lake processors to the intel_rapl power capping driver (Kaushlendra Kumar, Srinivas Pandruvada) - Add OPP and bandwidth support for Tegra186 (Aaron Kling) - Optimizations for parameter array handling in the amd-pstate cpufreq driver (Mario Limonciello) - Fix for mode changes with offline CPUs in the amd-pstate cpufreq driver (Gautham Shenoy) - Preserve freq_table_sorted across suspend/hibernate in the cpufreq core (Zihuan Zhang) - Adjust energy model rules for Intel hybrid platforms in the intel_pstate cpufreq driver and improve printing of debug messages in it (Rafael Wysocki) - Replace deprecated strcpy() in cpufreq_unregister_governor() (Thorsten Blum) - Fix duplicate hyperlink target errors in the intel_pstate cpufreq driver documentation and use :ref: directive for internal linking in it (Swaraj Gaikwad, Bagas Sanjaya) - Add Diamond Rapids OOB mode support to the intel_pstate cpufreq driver (Kuppuswamy Sathyanarayanan) - Use mutex guard for driver locking in the intel_pstate driver and eliminate some code duplication from it (Rafael Wysocki) - Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra Kumar) - Minor improvements to various cpufreq drivers (Christian Marangi, Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu) - Replace snprintf() with scnprintf() in show_trace_dev_match() (Kaushlendra Kumar) - Fix memory allocation error handling in pm_vt_switch_required() (Malaya Kumar Rout) - Introduce CALL_PM_OP() macro and use it to simplify code in generic PM operations (Kaushlendra Kumar) - Add module param to backtrace all CPUs in the device power management watchdog (Sergey Senozhatsky) - Rework message printing in swsusp_save() (Rafael Wysocki) - Make it possible to change the number of hibernation compression threads (Xueqin Luo) - Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo) - Add document on debugging shutdown hangs to PM documentation and correct a mistaken configuration option in it (Mario Limonciello) - Shut down wakeup source timer before removing the wakeup source from the list (Kaushlendra Kumar, Rafael Wysocki) - Introduce new PMSG_POWEROFF event for system shutdown handling with the help of PM device callbacks (Mario Limonciello) - Make pm_test delay interruptible by wakeup events (Riwen Lu) - Clean up kernel-doc comment style usage in the core hibernation code and remove unuseful comments from it (Sunday Adelodun, Rafael Wysocki) - Add support for handling wakeup events and aborting the suspend process while it is syncing file systems (Samuel Wu, Rafael Wysocki) - Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari) - Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use them in the PCI core and the ACPI TAD driver (Rafael Wysocki) - Improve runtime PM in the ACPI TAD driver (Rafael Wysocki) - Update pm_runtime_allow/forbid() documentation (Rafael Wysocki) - Fix typos in runtime.c comments (Malaya Kumar Rout) - Move governor.h from devfreq under include/linux/ and rename to devfreq-governor.h to allow devfreq governor definitions in out of drivers/devfreq/ (Dmitry Baryshkov) - Use min() to improve readability in tegra30-devfreq.c (Thorsten Blum) - Fix potential use-after-free issue of OPP handling in hisi_uncore_freq.c (Pengjie Zhang) - Fix typo in DFSO_DOWNDIFFERENTIAL macro name in governor_simpleondemand.c in devfreq (Riwen Lu)" * tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits) PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name cpuidle: Warn instead of bailing out if target residency check fails cpuidle: Update header inclusion Documentation: power/cpuidle: Document the CPU system wakeup latency QoS cpuidle: Respect the CPU system wakeup QoS limit for cpuidle sched: idle: Respect the CPU system wakeup QoS limit for s2idle pmdomain: Respect the CPU system wakeup QoS limit for cpuidle pmdomain: Respect the CPU system wakeup QoS limit for s2idle PM: QoS: Introduce a CPU system wakeup QoS limit cpuidle: governors: teo: Add missing space to the description PM: hibernate: Extra cleanup of comments in swap handling code PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate PM / devfreq: hisi: Fix potential UAF in OPP handling PM / devfreq: Move governor.h to a public header location powercap: intel_rapl: Enable MSR-based RAPL PMU support powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper() PM: sleep: Add support for wakeup during filesystem sync cpufreq: ACPI: Replace udelay() with usleep_range() ... 2025-12-03T01:03:55Z Linus Torvalds torvalds@linux-foundation.org 2025-12-03T01:03:55Z urn:sha1:44fc84337b6eae580a51cf6f7ca6a22ef1349556 Pull arm64 updates from Catalin Marinas: "These are the arm64 updates for 6.19. The biggest part is the Arm MPAM driver under drivers/resctrl/. There's a patch touching mm/ to handle spurious faults for huge pmd (similar to the pte version). The corresponding arm64 part allows us to avoid the TLB maintenance if a (huge) page is reused after a write fault. There's EFI refactoring to allow runtime services with preemption enabled and the rest is the usual perf/PMU updates and several cleanups/typos. Summary: Core features: - Basic Arm MPAM (Memory system resource Partitioning And Monitoring) driver under drivers/resctrl/ which makes use of the fs/rectrl/ API Perf and PMU: - Avoid cycle counter on multi-threaded CPUs - Extend CSPMU device probing and add additional filtering support for NVIDIA implementations - Add support for the PMUs on the NoC S3 interconnect - Add additional compatible strings for new Cortex and C1 CPUs - Add support for data source filtering to the SPE driver - Add support for i.MX8QM and "DB" PMU in the imx PMU driver Memory managemennt: - Avoid broadcast TLBI if page reused in write fault - Elide TLB invalidation if the old PTE was not valid - Drop redundant cpu_set_*_tcr_t0sz() macros - Propagate pgtable_alloc() errors outside of __create_pgd_mapping() - Propagate return value from __change_memory_common() ACPI and EFI: - Call EFI runtime services without disabling preemption - Remove unused ACPI function Miscellaneous: - ptrace support to disable streaming on SME-only systems - Improve sysreg generation to include a 'Prefix' descriptor - Replace __ASSEMBLY__ with __ASSEMBLER__ - Align register dumps in the kselftest zt-test - Remove some no longer used macros/functions - Various spelling corrections" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits) arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic arm64/pageattr: Propagate return value from __change_memory_common arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS KVM: arm64: selftests: Consider all 7 possible levels of cache KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros Documentation/arm64: Fix the typo of register names ACPI: GTDT: Get rid of acpi_arch_timer_mem_init() perf: arm_spe: Add support for filtering on data source perf: Add perf_event_attr::config4 perf/imx_ddr: Add support for PMU in DB (system interconnects) perf/imx_ddr: Get and enable optional clks perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe() dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT arm64: mm: use untagged address to calculate page index MAINTAINERS: new entry for MPAM Driver arm_mpam: Add kunit tests for props_mismatch() arm_mpam: Add kunit test for bitmap reset arm_mpam: Add helper to reset saved mbwu state ... 2025-12-03T00:37:00Z Linus Torvalds torvalds@linux-foundation.org 2025-12-03T00:37:00Z urn:sha1:2547f79b0b0cd969ae6f736890af4ebd9368cda5 Pull s390 updates from Heiko Carstens: - Provide a new interface for dynamic configuration and deconfiguration of hotplug memory, allowing with and without memmap_on_memory support. This makes the way memory hotplug is handled on s390 much more similar to other architectures - Remove compat support. There shouldn't be any compat user space around anymore, therefore get rid of a lot of code which also doesn't need to be tested anymore - Add stackprotector support. GCC 16 will get new compiler options, which allow to generate code required for kernel stackprotector support - Merge pai_crypto and pai_ext PMU drivers into a new driver. This removes a lot of duplicated code. The new driver is also extendable and allows to support new PMUs - Add driver override support for AP queues - Rework and extend zcrypt and AP trace events to allow for tracing of crypto requests - Support block sizes larger than 65535 bytes for CCW tape devices - Since the rework of the virtual kernel address space the module area and the kernel image are within the same 4GB area. This eliminates the need of weak per cpu variables. Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU - Various other small improvements and fixes * tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits) watchdog: diag288_wdt: Remove KMSG_COMPONENT macro s390/entry: Use lay instead of aghik s390/vdso: Get rid of -m64 flag handling s390/vdso: Rename vdso64 to vdso s390: Rename head64.S to head.S s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros s390: Add stackprotector support s390/modules: Simplify module_finalize() slightly s390: Remove KMSG_COMPONENT macro s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU s390/ap: Restrict driver_override versus apmask and aqmask use s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex s390/ap: Support driver_override for AP queue devices s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks s390/debug: Update description of resize operation s390/syscalls: Switch to generic system call table generation s390/syscalls: Remove system call table pointer from thread_struct s390/uapi: Remove 31 bit support from uapi header files s390: Remove compat support tools: Remove s390 compat support ... 2025-12-02T19:55:58Z Linus Torvalds torvalds@linux-foundation.org 2025-12-02T19:55:58Z urn:sha1:2ae20d651091c71ef182d28cbf10ce6f8be79c99 Pull x86 resource control updates from Borislav Petkov: - Add support for AMD's Smart Data Cache Injection feature which allows for direct insertion of data from I/O devices into the L3 cache, thus bypassing DRAM and saving its bandwidth; the resctrl side of the feature allows the size of the L3 used for data injection to be controlled - Add Intel Clearwater Forest to the list of CPUs which support Sub-NUMA clustering - Other fixes and cleanups * tag 'x86_cache_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/resctrl: Update bit_usage to reflect io_alloc fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks fs/resctrl: Modify struct rdt_parse_data to pass mode and CLOSID fs/resctrl: Introduce interface to display io_alloc CBMs fs/resctrl: Add user interface to enable/disable io_alloc feature fs/resctrl: Introduce interface to display "io_alloc" support x86,fs/resctrl: Implement "io_alloc" enable/disable handlers x86,fs/resctrl: Detect io_alloc feature x86/resctrl: Add SDCIAE feature in the command line options x86/cpufeatures: Add support for L3 Smart Data Cache Injection Allocation Enforcement fs/resctrl: Consider sparse masks when initializing new group's allocation x86/resctrl: Support Sub-NUMA Cluster (SNC) mode on Clearwater Forest 2025-12-02T18:45:50Z Linus Torvalds torvalds@linux-foundation.org 2025-12-02T18:45:50Z urn:sha1:49219bba0149157774b7091c3ea9ad22b2114285 Pull EDAC updates from Borislav Petkov: - imh_edac: Add a new EDAC driver for Intel Diamond Rapids and future incarnations of this memory controllers architecture - amd64_edac: Remove the legacy csrow sysfs interface which has been deprecated and unused (we assume) for at least a decade - Add the capability to fallback to BIOS-provided address translation functionality (ACPI PRM) which can be used on systems unsupported by the current AMD address translation library - The usual fixes, fixlets, cleanups and improvements all over the place * tag 'edac_updates_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: RAS/AMD/ATL: Replace bitwise_xor_bits() with hweight16() EDAC/igen6: Fix error handling in igen6_edac driver EDAC/imh: Setup 'imh_test' debugfs testing node EDAC/{skx_comm,imh}: Detect 2-level memory configuration EDAC/skx_common: Extend the maximum number of DRAM chip row bits EDAC/{skx_common,imh}: Add EDAC driver for Intel Diamond Rapids servers EDAC/skx_common: Prepare for skx_set_hi_lo() EDAC/skx_common: Prepare for skx_get_edac_list() EDAC/{skx_common,skx,i10nm}: Make skx_register_mci() independent of pci_dev EDAC/ghes: Replace deprecated strcpy() in ghes_edac_report_mem_error() EDAC/ie31200: Fix error handling in ie31200_register_mci RAS/CEC: Replace use of system_wq with system_percpu_wq EDAC: Remove the legacy EDAC sysfs interface EDAC/amd64: Remove NUM_CONTROLLERS macro EDAC/amd64: Generate ctl_name string at runtime RAS/AMD/ATL: Require PRM support for future systems ACPI: PRM: Add acpi_prm_handler_available() RAS/AMD/ATL: Return error codes from helper functions 2025-12-02T17:54:27Z Linus Torvalds torvalds@linux-foundation.org 2025-12-02T17:54:27Z urn:sha1:5028f42416eaec08d3f6aa4f98ccca669b3f8ab3 Pull clocksource updates from Thomas Gleixner: "Updates for clocksource and clockevent drivers: - A new driver for the Realtel system timer - Prevent the unbinding of timers when the drivers do not support that - Expand the timer counter readout for the SPRD driver to 64 bit to allow IOT devices suspend times of more than 36 hours, which is the current limit of the 32-bi readout - The usual small cleanups, fixes and enhancements all over the place" * tag 'timers-clocksource-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers: Add Realtek system timer driver dt-bindings: timer: Add Realtek SYSTIMER clocksource/drivers/stm32-lp: Drop unused module alias clocksource/drivers/rda: Add sched_clock_register for RDA8810PL SoC clocksource/drivers/nxp-stm: Prevent driver unbind clocksource/drivers/nxp-pit: Prevent driver unbind clocksource/drivers/arm_arch_timer_mmio: Prevent driver unbind clocksource/drivers/nxp-stm: Fix section mismatches clocksource/drivers/sh_cmt: Always leave device running after probe clocksource/drivers/stm: Fix double deregistration on probe failure clocksource/drivers/ralink: Fix resource leaks in init error path clocksource/drivers/timer-sp804: Fix read_current_timer() issue when clock source is not registered clocksource/drivers/sprd: Enable register for timer counter from 32 bit to 64 bit 2025-12-02T17:32:53Z Linus Torvalds torvalds@linux-foundation.org 2025-12-02T17:32:53Z urn:sha1:15b87bec89cb227b55b3689bf5de31b85cf88559 Pull irq driver updates from Thomas Gleixner: "Boring updates for interrupt drivers: - Support for a couple of new ARM64 and RISCV SoC variants and their magic interrupt controllers which either can reuse existing code or require quirks due to a botched hardware implementation - More section mismatch fixes - The usual cleanups and fixes all over the place" * tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) irqchip/meson-gpio: Add support for Amlogic S6 S7 and S7D SoCs dt-bindings: interrupt-controller: Add support for Amlogic S6 S7 and S7D SoCs dt-bindings: interrupt-controller: aspeed,ast2700: Correct #interrupt-cells and interrupts count irqchip/aclint-sswi: Add Nuclei UX900 support dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC irqchip/irq-bcm7038-l1: Remove unused reg_mask_status() irqchip/sifive-plic: Fix call to __plic_toggle() in M-Mode code path irqchip/sifive-plic: Add support for UltraRISC DP1000 PLIC irqchip/sifive-plic: Cache the interrupt enable state dt-bindings: interrupt-controller: Add UltraRISC DP1000 PLIC dt-bindings: vendor-prefixes: Add UltraRISC irqchip/qcom-irq-combiner: Rename driver structure irqchip/riscv-imsic: Inline imsic_vector_from_local_id() irqchip/riscv-imsic: Embed the vector array in lpriv irqchip/riscv-imsic: Remove redundant irq_data lookups irqchip/ts4800: Drop unused module alias irqchip/mvebu-pic: Drop unused module alias irqchip/meson-gpio: Drop unused module alias ...