linux-rng/drivers/net, branch master

Merge tag 'fpsimd-on-stack-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux

2025-12-03T02:53:50Z

Pull arm64 FPSIMD on-stack buffer updates from Eric Biggers: "This is a core arm64 change. However, I was asked to take this because most uses of kernel-mode FPSIMD are in crypto or CRC code. In v6.8, the size of task_struct on arm64 increased by 528 bytes due to the new 'kernel_fpsimd_state' field. This field was added to allow kernel-mode FPSIMD code to be preempted. Unfortunately, 528 bytes is kind of a lot for task_struct. This regression in the task_struct size was noticed and reported. Recover that space by making this state be allocated on the stack at the beginning of each kernel-mode FPSIMD section. To make it easier for all the users of kernel-mode FPSIMD to do that correctly, introduce and use a 'scoped_ksimd' abstraction" * tag 'fpsimd-on-stack-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (23 commits) lib/crypto: arm64: Move remaining algorithms to scoped ksimd API lib/crypto: arm/blake2b: Move to scoped ksimd API arm64/fpsimd: Allocate kernel mode FP/SIMD buffers on the stack arm64/fpu: Enforce task-context only for generic kernel mode FPU net/mlx5: Switch to more abstract scoped ksimd guard API on arm64 arm64/xorblocks: Switch to 'ksimd' scoped guard API crypto/arm64: sm4 - Switch to 'ksimd' scoped guard API crypto/arm64: sm3 - Switch to 'ksimd' scoped guard API crypto/arm64: sha3 - Switch to 'ksimd' scoped guard API crypto/arm64: polyval - Switch to 'ksimd' scoped guard API crypto/arm64: nhpoly1305 - Switch to 'ksimd' scoped guard API crypto/arm64: aes-gcm - Switch to 'ksimd' scoped guard API crypto/arm64: aes-blk - Switch to 'ksimd' scoped guard API crypto/arm64: aes-ccm - Switch to 'ksimd' scoped guard API raid6: Move to more abstract 'ksimd' guard API crypto: aegis128-neon - Move to more abstract 'ksimd' guard API crypto/arm64: sm4-ce-gcm - Avoid pointless yield of the NEON unit crypto/arm64: sm4-ce-ccm - Avoid pointless yield of the NEON unit crypto/arm64: aes-ce-ccm - Avoid pointless yield of the NEON unit lib/crc: Switch ARM and arm64 to 'ksimd' scoped guard API ...

Merge tag 'libcrypto-at-least-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux

2025-12-03T02:26:54Z

Pull 'at_least' array size update from Eric Biggers: "C supports lower bounds on the sizes of array parameters, using the static keyword as follows: 'void f(int a[static 32]);'. This allows the compiler to warn about a too-small array being passed. As discussed, this reuse of the 'static' keyword, while standard, is a bit obscure. Therefore, add an alias 'at_least' to compiler_types.h. Then, add this 'at_least' annotation to the array parameters of various crypto library functions" * tag 'libcrypto-at-least-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crypto: sha2: Add at_least decoration to fixed-size array params lib/crypto: sha1: Add at_least decoration to fixed-size array params lib/crypto: poly1305: Add at_least decoration to fixed-size array params lib/crypto: md5: Add at_least decoration to fixed-size array params lib/crypto: curve25519: Add at_least decoration to fixed-size array params lib/crypto: chacha: Add at_least decoration to fixed-size array params lib/crypto: chacha20poly1305: Statically check fixed array lengths compiler_types: introduce at_least parameter decoration pseudo keyword wifi: iwlwifi: trans: rename at_least variable to min_mode

Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux

2025-12-03T02:01:03Z

Pull crypto library updates from Eric Biggers: "This is the main crypto library pull request for 6.19. It includes: - Add SHA-3 support to lib/crypto/, including support for both the hash functions and the extendable-output functions. Reimplement the existing SHA-3 crypto_shash support on top of the library. This is motivated mainly by the upcoming support for the ML-DSA signature algorithm, which needs the SHAKE128 and SHAKE256 functions. But even on its own it's a useful cleanup. This also fixes the longstanding issue where the architecture-optimized SHA-3 code was disabled by default. - Add BLAKE2b support to lib/crypto/, and reimplement the existing BLAKE2b crypto_shash support on top of the library. This is motivated mainly by btrfs, which supports BLAKE2b checksums. With this change, all btrfs checksum algorithms now have library APIs. btrfs is planned to start just using the library directly. This refactor also improves consistency between the BLAKE2b code and BLAKE2s code. And as usual, it also fixes the issue where the architecture-optimized BLAKE2b code was disabled by default. - Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL support in crypto_shash. Reimplement HCTR2 on top of the library. This simplifies the code and improves HCTR2 performance. As usual, it also makes the architecture-optimized code be enabled by default. The generic implementation of POLYVAL is greatly improved as well. - Clean up the BLAKE2s code - Add FIPS self-tests for SHA-1, SHA-2, and SHA-3" * tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits) fscrypt: Drop obsolete recommendation to enable optimized POLYVAL crypto: polyval - Remove the polyval crypto_shash crypto: hctr2 - Convert to use POLYVAL library lib/crypto: x86/polyval: Migrate optimized code into library lib/crypto: arm64/polyval: Migrate optimized code into library lib/crypto: polyval: Add POLYVAL library crypto: polyval - Rename conflicting functions lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value lib/crypto: x86/blake2s: Improve readability lib/crypto: x86/blake2s: Use local labels for data lib/crypto: x86/blake2s: Drop check for nblocks == 0 lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit lib/crypto: arm, arm64: Drop filenames from file comments lib/crypto: arm/blake2s: Fix some comments crypto: s390/sha3 - Remove superseded SHA-3 code crypto: sha3 - Reimplement using library API crypto: jitterentropy - Use default sha3 implementation lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions lib/crypto: sha3: Support arch overrides of one-shot digest functions ...

net: fec: do not register PPS event for PEROUT

2025-11-27T10:57:45Z

There are currently two situations that can trigger the PTP interrupt, one is the PPS event, the other is the PEROUT event. However, the irq handler fec_pps_interrupt() does not check the irq event type and directly registers a PPS event into the system, but the event may be a PEROUT event. This is incorrect because PEROUT is an output signal, while PPS is the input of the kernel PPS system. Therefore, add a check for the event type, if pps_enable is true, it means that the current event is a PPS event, and then the PPS event is registered. Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS") Signed-off-by: Wei Fang Link: https://patch.msgid.link/20251125085210.1094306-5-wei.fang@nxp.com Signed-off-by: Paolo Abeni

net: fec: do not allow enabling PPS and PEROUT simultaneously

2025-11-27T10:57:45Z

In the current driver, PPS and PEROUT use the same channel to generate the events, so they cannot be enabled at the same time. Otherwise, the later configuration will overwrite the earlier configuration. Therefore, when configuring PPS, the driver will check whether PEROUT is enabled. Similarly, when configuring PEROUT, the driver will check whether PPS is enabled. Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS") Signed-off-by: Wei Fang Link: https://patch.msgid.link/20251125085210.1094306-4-wei.fang@nxp.com Signed-off-by: Paolo Abeni

net: fec: do not update PEROUT if it is enabled

2025-11-27T10:57:45Z

If the previously set PEROUT is already active, updating it will cause the new PEROUT to start immediately instead of at the specified time. This is because fep->reload_period is updated whithout check whether the PEROUT is enabled, and the old PEROUT is not disabled. Therefore, the pulse period will be updated immediately in the pulse interrupt handler fec_pps_interrupt(). Currently, the driver does not support directly updating PEROUT and it will make the logic be more complicated. To fix the current issue, add a check before enabling the PEROUT, the driver will return an error if PEROUT is enabled. If users wants to update a new PEROUT, they should disable the old PEROUT first. Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS") Signed-off-by: Wei Fang Link: https://patch.msgid.link/20251125085210.1094306-3-wei.fang@nxp.com Signed-off-by: Paolo Abeni

net: fec: cancel perout_timer when PEROUT is disabled

2025-11-27T10:57:45Z

The PEROUT allows the user to set a specified future time to output the periodic signal. If the future time is far from the current time, the FEC driver will use hrtimer to configure PEROUT one second before the future time. However, the hrtimer will not be canceled if the PEROUT is disabled before the hrtimer expires. So the PEROUT will be configured when the hrtimer expires, which is not as expected. Therefore, cancel the hrtimer in fec_ptp_pps_disable() to fix this issue. Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS") Signed-off-by: Wei Fang Link: https://patch.msgid.link/20251125085210.1094306-2-wei.fang@nxp.com Signed-off-by: Paolo Abeni

Merge tag 'linux-can-fixes-for-6.18-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

2025-11-27T03:56:00Z

Marc Kleine-Budde says: ==================== pull-request: can 2025-11-26 this is a pull request of 8 patches for net/main. Seungjin Bae provides a patch for the kvaser_usb driver to fix a potential infinite loop in the USB data stream command parser. Thomas Mühlbacher's patch for the sja1000 driver IRQ handler's max loop handling, that might lead to unhandled interrupts. 3 patches by me for the gs_usb driver fix handling of failed transmit URBs and add checking of the actual length of received URBs before accessing the data. The next patch is by me and is a port of Thomas Mühlbacher's patch (fix IRQ handler's max loop handling, that might lead to unhandled interrupts.) to the sun4i_can driver. Biju Das provides a patch for the rcar_canfd driver to fix the CAN-FD mode setting. The last patch is by Shaurya Rane for the em_canid filter to ensure that the complete CAN frame is present in the linear data buffer before accessing it. * tag 'linux-can-fixes-for-6.18-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: net/sched: em_canid: fix uninit-value in em_canid_match can: rcar_canfd: Fix CAN-FD mode as default can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing data can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing header can: gs_usb: gs_usb_xmit_callback(): fix handling of failed transmitted URBs can: sja1000: fix max irq loop handling can: kvaser_usb: leaf: Fix potential infinite loop in command parsers ==================== Link: https://patch.msgid.link/20251126155713.217105-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski

net: atlantic: fix fragment overflow handling in RX path

2025-11-27T03:52:49Z

The atlantic driver can receive packets with more than MAX_SKB_FRAGS (17) fragments when handling large multi-descriptor packets. This causes an out-of-bounds write in skb_add_rx_frag_netmem() leading to kernel panic. The issue occurs because the driver doesn't check the total number of fragments before calling skb_add_rx_frag(). When a packet requires more than MAX_SKB_FRAGS fragments, the fragment index exceeds the array bounds. Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE, then all fragments are accounted for. And reusing the existing check to prevent the overflow earlier in the code path. This crash occurred in production with an Aquantia AQC113 10G NIC. Stack trace from production environment: ``` RIP: 0010:skb_add_rx_frag_netmem+0x29/0xd0 Code: 90 f3 0f 1e fa 0f 1f 44 00 00 48 89 f8 41 89 ca 48 89 d7 48 63 ce 8b 90 c0 00 00 00 48 c1 e1 04 48 01 ca 48 03 90 c8 00 00 00 <48> 89 7a 30 44 89 52 3c 44 89 42 38 40 f6 c7 01 75 74 48 89 fa 83 RSP: 0018:ffffa9bec02a8d50 EFLAGS: 00010287 RAX: ffff925b22e80a00 RBX: ffff925ad38d2700 RCX: fffffffe0a0c8000 RDX: ffff9258ea95bac0 RSI: ffff925ae0a0c800 RDI: 0000000000037a40 RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000021 R10: 0000000000000848 R11: 0000000000000000 R12: ffffa9bec02a8e24 R13: ffff925ad8615570 R14: 0000000000000000 R15: ffff925b22e80a00 FS: 0000000000000000(0000) GS:ffff925e47880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9258ea95baf0 CR3: 0000000166022004 CR4: 0000000000f72ef0 PKRU: 55555554 Call Trace: aq_ring_rx_clean+0x175/0xe60 [atlantic] ? aq_ring_rx_clean+0x14d/0xe60 [atlantic] ? aq_ring_tx_clean+0xdf/0x190 [atlantic] ? kmem_cache_free+0x348/0x450 ? aq_vec_poll+0x81/0x1d0 [atlantic] ? __napi_poll+0x28/0x1c0 ? net_rx_action+0x337/0x420 ``` Fixes: 6aecbba12b5c ("net: atlantic: add check for MAX_SKB_FRAGS") Changes in v4: - Add Fixes: tag to satisfy patch validation requirements. Changes in v3: - Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE, then all fragments are accounted for. Signed-off-by: Jiefeng Zhang Link: https://patch.msgid.link/20251126032249.69358-1-jiefeng.z.zhang@gmail.com Signed-off-by: Jakub Kicinski

virtio-net: avoid unnecessary checksum calculation on guest RX

2025-11-27T03:45:54Z

Commit a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.") inadvertently altered checksum offload behavior for guests not using UDP GSO tunneling. Before, tun_put_user called tun_vnet_hdr_from_skb, which passed has_data_valid = true to virtio_net_hdr_from_skb. After, tun_put_user began calling tun_vnet_hdr_tnl_from_skb instead, which passes has_data_valid = false into both call sites. This caused virtio hdr flags to not include VIRTIO_NET_HDR_F_DATA_VALID for SKBs where skb->ip_summed == CHECKSUM_UNNECESSARY. As a result, guests are forced to recalculate checksums unnecessarily. Restore the previous behavior by ensuring has_data_valid = true is passed in the !tnl_gso_type case, but only from tun side, as virtio_net_hdr_tnl_from_skb() is used also by the virtio_net driver, which in turn must not use VIRTIO_NET_HDR_F_DATA_VALID on tx. cc: stable@vger.kernel.org Fixes: a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.") Signed-off-by: Jon Kohler Acked-by: Michael S. Tsirkin Acked-by: Jason Wang Link: https://patch.msgid.link/20251125222754.1737443-1-jon@nutanix.com Signed-off-by: Jakub Kicinski