aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)AuthorFilesLines
2011-10-26Merge branch 'next' into for-linusDmitry Torokhov15-137/+531
2011-10-24input: Convert mc13783-ts to mc13xxx APIUwe Kleine-König1-17/+17
This is the first step to also support the touch interface of the mc13892 pmic chip. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-11Input: tsc2007 - make sure that X plate resistance is specifiedPhilip Rakity1-0/+6
Abort driver initialization if X plate resistance was not specified in platform data as it will cause pressure to be always calculated as 0, and making userspace ignore touch coordinates. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEPDmitry Torokhov1-4/+2
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in the context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): ad7879-i2c.c: warning: 'ad7879_i2c_resume' defined but not used Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: atmel_mxt_ts - use snprintf for sysfs attribute show methodDaniel Kurtz1-6/+15
Sysfs attribute show methods are always passed a buffer of length PAGE_SIZE. To keep from overwriting this buffer and causing havoc, use snprintf() to guarantee we never write more than the buffer can hold. In addition, at least for my touchscreen, the number and size of objects was far too big to fit in a single 4K page. Therefore, this patch also trims some redundant framing text to leave more room for actual data. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-28Input: add a driver for TSC-40 serial touchscreenSebastian Andrzej Siewior3-0/+197
This patch adds the TSC-40 serial touchscreen driver and should be compatible with TSC-10 and TSC-25. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - simplify unregister procedureDmitry Torokhov1-4/+4
Since touchscreen driver does not handle any events to be sent to the device we can close serio port first and then unregister the input device. Tested-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - rework handling of different protocolsDmitry Torokhov1-56/+64
Instead of having one large switch based on product ID use pointer to function actually doing protocol decoding. Tested-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 6250 supportJohn Sung1-0/+23
Add multi touch support for PenMount 6250 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 3000 supportJohn Sung1-4/+75
Add dual touch support for PenMount 3000 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 6000 supportJohn Sung1-8/+57
Add support for PenMount 6000 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - fix the protocolJohn Sung1-6/+8
The MSB and LSB of the XY axis value are switched according to the PenMount 9000 protocol. The driver name is also changed from penmountlpc, since it is not for LPC interface at all. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08Input: wacom - add POINTER and DIRECT device propertiesJason Gerecke1-0/+2
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the hardware supported by the Wacom driver. The DIRECT property is assigned to devices with an embedded screen (i.e. touchscreens and display tablets). The POINTER property is assigned to those without embedded screens. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Input: remove IRQF_DISABLED from driversYong Zhang7-8/+8
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Merge commit 'v3.1-rc4' into nextDmitry Torokhov4-2/+18
2011-08-26Input: tsc2007 - add open and close methodsDmitry Torokhov1-8/+38
This will ensure that the device delivers input events only when there are users. Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: tsc2007 - convert to threaded IRQDmitry Torokhov1-84/+66
Instead of using hard IRQ and workqueue solution switch to using threaded interrupt handler to simplify the code and locking rules. Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: wacom_w8001 - simplify w8001_removeDmitry Torokhov1-4/+4
Since touchscreen driver does not handle any events to be sent to the device we can close serio port first and then unregister the input device. Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: wacom_w8001 - implement open and closeDmitry Torokhov1-1/+20
Implement open() and close() methods for the input device so that we do not start the device unless there are users listening to the events. Acked-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-21Input: tnetv107x-ts - add missing include of linux/module.hAxel Lin1-0/+1
tnetv107x-ts.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-20Input: max11801_ts - correct license statementJiejing Zhang1-1/+2
The original license statement was confusing since it was unclear if the license was pure GPLv2 or GPLv2+ and did not match the license of the driver max11801_ts was derived from. The license is GPLv2+. Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16Input: atmel_mxt_ts - report pressure information from the driverYufeng Shen1-0/+12
Atmel mxt1386 touch controller has the touch pressure information so let's report it to the user space. [dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.] Signed-off-by: Yufeng Shen <miletus@chromium.org> Acked-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-02Input: ad7879 - fix deficient device disableMichael Hennerich1-1/+3
Input close or device disable should not interact with the exported gpiolib functionality. However that's the case. __ad7879_disable() clears the entire AD7879_REG_CTRL2, while it should just power down the ADC and its reference. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18Input: intel-mid-touch - remove pointless checking for variable 'found'Axel Lin1-10/+5
The implementation does break from the for loop after we assign 'i' to variable 'found'. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform dataAxel Lin1-0/+2
The implementation in cy8ctmg110_probe() does not properly set reset_pin and irq_pin from platform data. Let's fix it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13Input: cy8ctmg110_ts - constify i2c_device_id tableAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-13Input: cy8ctmg110_ts - fix checking return value of i2c_master_sendAxel Lin1-2/+2
i2c_master_send returns negative errno, or else the number of bytes written. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: wm97xx - mark channels which need pen_downWolfram Sang3-15/+20
Currently, battery drivers also use poll_sample() provided by the wm97xx-core but this code always checks if the pen is down. Mark the channels which really need this (i.e. for the touchscreen) with the PEN_DOWN bit, and skip the checks otherwise. Now, the battery channels can always be read. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: wm97xx - refactor channel selection in poll_sample()Wolfram Sang3-25/+21
The current implementation of poll_sample() has the problem that one of its arguments, the channel to be selected, differs from wm9713 to other variants. This parameter gets passed to the (currently unused) mach-specific functions pre_sample() and post_sample() which thus have to deal with codec-specific differences. Refactor the routine so that the argument to poll_sample() is generic for all codecs and do necessary conversions only in the codec-specific driver. The outcome even uses less code and removes the non-standard use of the PEN_DOWN bit to mark the AUX-channels. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: wm97xx - remove redundant defineWolfram Sang4-9/+9
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: atmel_mxt_ts - handle objects with multiple instances correctlyIiro Valkonen1-2/+4
Handle the objects with multiple instances correctly when the configuration data is loaded. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04Input: atmel_mxt_ts - update object listIiro Valkonen1-81/+101
Update the object list to include new objects, and add unique identifiers so we can distinguish between old & new generation of the same object. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-29Input: update author email for gpio_mouse, at32psif, and atmel-wm97xxHans-Christian Egtvedt1-1/+1
This patch updates the email address of the gpio_mouse, at32psif, and atmel-wm97xx drivers supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27Input: ads7846 - cleanup GPIO initializationIgor Grinberg1-10/+5
Use gpio_request_one() instead of multiple gpiolib calls. This also simplifies error handling a bit. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27Input: tnetv107x-ts - fix MODULE_ALIASAxel Lin1-1/+1
Remove the space between "platform:" prefix and the driver name. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-24Merge branch 'next' into for-linusDmitry Torokhov17-70/+399
2011-05-17Input: tsc2007 - add X, Y and Z fuzz factors to platform dataThierry Reding1-3/+4
These new platform-specific values can be used to set the fuzz parameter passed to the input_set_abs_params() function for the ABS_X, ABS_Y and ABS_PRESSURE axes. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add poll_period parameter to platform dataThierry Reding1-3/+3
This new parameter allows the polling frequency to be configured while keeping the default of once every millisecond. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add poll_delay parameter to platform dataThierry Reding1-2/+3
Depending on the quality of the touch panel, the time for the X-, X+, Y- and Y+ inputs to settle may vary. The poll_delay parameter can be used to override the default of 1 millisecond. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add max_rt parameter to platform dataThierry Reding1-1/+3
Finger touch events or very quick stylus events on low-quality panels can cause the tsc2007 to read bogus values. Looking at oscilloscope snapshots, this seems to be caused by the touch event disappearing during the measurements. These bogus values result in misclicks, where the X and Y values deviate from the real position. Most of these misclicks can be filtered out by setting a low enough threshold for the maximum resistance (which is loosely the inverse of the pressure) allowed to consider a set of values valid. Since this behaviour is largely dependent on the type and quality of the panel, this commit introduces the max_rt parameter. The default value is kept at MAX_12BIT. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - debounce pressure measurementThierry Reding1-1/+3
When the controller signals a pen-down event via the platform-specific GPIO, while the sample values indicate an invalid measurement, the measurement needs to be repeated. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-14Input: atmel_tsadcc - correct call to input_free_deviceJulia Lawall1-1/+1
This error handling code can be reached before ts_dev->input is initialized, so it is safer to always use the original name, input_dev. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: ads7846 - fix gpio_pendown configurationIgor Grinberg1-0/+7
The pendown gpio was requested but not configured for input. Configure it for input. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: ads7846 - add possibility to use external vref on ads7846Alexander Stein1-8/+11
Just set vref_mv in your platform config to use external vref. Otherwise the internal one is used. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - remove unused variable from struct ads7845_ser_reqAlexander Stein1-1/+0
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - make transfer buffers DMA safeAlexander Stein1-2/+10
req.sample needs its own cacheline otherwise accessing req.msg fetches it in again. Note: This effect doesn't occur if the underlying SPI driver doesn't use DMA at all. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03Input: h3600_ts_input - fix a leak of the IRQ during init failureAxel Lin1-4/+4
Make sure we are passing the same cookie in all calls to request_irq() and free_irq(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - move BTN_TOUCH reporting to data transferMark Brown1-3/+2
Don't report BTN_TOUCH until we've got data as some less robust applications can be confused by getting a touch event by itself and it doesn't seem unreasonable for them to expect coordinates along with a touch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - allow IRQ flags to be specifiedMark Brown1-3/+13
This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - fix races with IRQ managementMark Brown1-5/+49
If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.