| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-7-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-6-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-4-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-3-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-2-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
During init of the bus, the module checks that the bus is idle.
If one of the lines are stuck try to recover them first before failing.
Sometimes SDA and SCL are low if improper reset occurs (e.g., reboot).
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry@gmail.com>
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250328193252.1570811-1-mohammed.0.elbadry@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
'struct i2c_algorithm' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
11027 646 16 11689 2da9 drivers/i2c/busses/i2c-rzv2m.o
After:
=====
text data bss dec hex filename
11107 566 16 11689 2da9 drivers/i2c/busses/i2c-rzv2m.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/537d93441ced53bffa6553b8ec93d007e64cb9a5.1743258995.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add corresponding error messages if DMA channels are not available during
probe. Using dev_err_probe adds deferred probe messages as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250408100300.556703-1-alexander.stein@ew.tq-group.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The PCC driver now handles mapping and unmapping of shared memory
areas as part of pcc_mbox_{request,free}_channel(). Without these before,
this xgene-slimpro I2C driver did handling of those mappings like several
other PCC mailbox client drivers.
There were redundant operations, leading to unnecessary code. Maintaining
the consistency across these driver was harder due to scattered handling
of shmem.
Just use the mapped shmem and remove all redundant operations from this
driver.
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411112303.1149086-1-sudeep.holla@arm.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add check for the return value of clk_enable() to catch
the potential error.
This is similar to the commit 8332e6670997
("spi: zynq-qspi: Add check for clk_enable()").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250412193713.105838-1-chenyuan0y@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Return value from npcm_i2c_get_slave_addr() directly instead of taking
this in another redundant variable.
This improvement has been suggested by Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Zhang Songyi <zhang.songyi@zte.com.cn>
Link: https://lore.kernel.org/r/20250320004321.1914366-1-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Since we have generic definitions for bus frequencies, let's use them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250322144736.472777-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The tj_max value obtained from the Intel TCC library are in Celsius,
whereas the thermal subsystem operates in milli-Celsius.
This discrepancy leads to incorrect trip temperature calculations.
Fix bogus trip temperature by converting tj_max to milli-Celsius Unit.
Fixes: 8ef0ca4a177d ("Merge back other thermal control material for 6.3.")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: zhang ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/all/TY2PR01MB3786EF0FE24353026293F5ACCD97A@TY2PR01MB3786.jpnprd01.prod.outlook.com/
Tested-by: zhang ning <zhangn1985@outlook.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Link: https://patch.msgid.link/20250519070901.1031233-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge updates of multiple thermal drivers for 6.16 from Daniel Lezcano:
"- Make the Hisilicon driver to compile by default when ARCH_HISI is
set (Krzysztof Kozlowski)
- Cleanup printk format with use of %pC instead of %pCn in the bcm2835
driver (Luca Ceresoli)
- Fix variable naming coding style in the AmLogic driver (Enrique
Isidoro Vazquez Ramos)
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS driver (AngeloGioacchino Del Regno)
- Remove the unused lvts_debugfs_exit() function as the devm variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann)
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi)
- Add ipq5018 compatible string DT binding, cleanup and add its suppot
in the QCom Tsens driver driver (Sricharan Ramabadhran and George
Moussalem)
- Fix comments typos in the Airoha driver (Christian Marangi)"
* tag 'thermal-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/airoha: Fix spelling mistake
thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
thermal/drivers: Add support for Airoha EN7581 thermal sensor
dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
vsprintf: remove redundant and unused %pCn format specifier
thermal/drivers/bcm2835: Use %pC instead of %pCn
thermal/drivers/hisi: Do not enable by default during compile testing
|
|
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Merge an update of the Intel int340x thermal driver adding Platform
Temperature Control (PTC) support to it (Srinivas Pandruvada).
* thermal-intel:
thermal: int340x: processor_thermal: Platform temperature control documentation
thermal: intel: int340x: Enable platform temperature control
thermal: intel: int340x: Add platform temperature control interface
|
|
The keyboard is properly initialized by the firmware on Loongson
platform, so full reset of the keyboard is not needed. Switch the
default to avoid performing full reset of the keyboard.
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250401094154.11527-1-zhaoqunqin@loongson.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In this driver file, many functions call sub-functions and use ret
to store the error code of the sub-functions.
However, instead of directly returning ret to the caller, they use a
converted error code, which prevents the end-user from clearly
understanding the root cause of the error.
Therefore, the code needs to be modified to directly return the error
code from the sub-functions.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-7-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
If the VF device driver is not loaded in the Guest OS and we attempt to
perform device data migration, the address of the migrated data will
be NULL.
The live migration recovery operation on the destination side will
access a null address value, which will cause access errors.
Therefore, live migration of VMs without added VF device drivers
does not require device data migration.
In addition, when the queue address data obtained by the destination
is empty, device queue recovery processing will not be performed.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-6-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In a live migration scenario. If the number of VFs at the
destination is greater than the source, the recovery operation
will fail and qemu will not be able to complete the process and
exit after shutting down the device FD.
This will cause the driver to be unable to be unloaded normally due
to abnormal reference counting of the live migration driver caused
by the abnormal closing operation of fd.
Therefore, make sure the migration file descriptor references are
always released when the device is closed.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-5-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
At present, cache write-back is placed in the device data
copy stage after stopping the device operation.
Writing back to the cache at this stage will cause the data
obtained by the cache to be written back to be empty.
In order to ensure that the cache data is written back
successfully, the data needs to be written back into the
stop device stage.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-4-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In order to ensure that the task packets of the accelerator
device are not lost during the migration process, it is necessary
to send an EQ and AEQ command to the device after the live migration
is completed and to update the completion position of the task queue.
Let the device recheck the completed tasks data and if there are
uncollected packets, device resend a task completion interrupt
to the software.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The dma addresses of EQE and AEQE are wrong after migration and
results in guest kernel-mode encryption services failure.
Comparing the definition of hardware registers, we found that
there was an error when the data read from the register was
combined into an address. Therefore, the address combination
sequence needs to be corrected.
Even after fixing the above problem, we still have an issue
where the Guest from an old kernel can get migrated to
new kernel and may result in wrong data.
In order to ensure that the address is correct after migration,
if an old magic number is detected, the dma address needs to be
updated.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250510081155.55840-2-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
VFIO is looking to enable an optimization where it can rely on a fast
unmap operation that returned the size of a larger IOPTE.
Due to how the test was constructed this would only ever succeed on the
AMDv1 page table that supported an 8k contiguous size. Nothing else
supports this.
Alex says the performance win was fairly minor, so lets remove this
code. Always use iommu_iova_to_phys() to extent contiguous pages.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v2-97fa1da8d983+412-vfio_fgsp_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
During a code review, it is observed that in the scenario
where scan initiation fails, the current code schedules the
ar->scan.timeout workqueue which is not necessary.
In the scan initiation failure scenario, exit the code instead
of scheduling the ar->scan.timeout workqueue.
Compile tested only.
Signed-off-by: Vignesh C <quic_vignc@quicinc.com>
Link: https://patch.msgid.link/20250512065849.2833232-1-quic_vignc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Memory allocated for firmware pdev, vdev and beacon statistics
are not released during rmmod. Below kmemleak trace is seen for this
memory leak:
unreferenced object 0xffff8e76aebdfa00 (size 256):
comm "softirq", pid 0, jiffies 4299272453
hex dump (first 32 bytes):
28 19 71 c3 76 8e ff ff 28 19 71 c3 76 8e ff ff (.q.v...(.q.v...
9f ff ff ff f4 d4 03 00 aa 88 09 00 bd 40 23 00 .............@#.
backtrace (crc dfe1b440):
__kmalloc_cache_noprof+0x2b0/0x370
ath12k_wmi_tlv_fw_stats_data_parse.isra.0+0x44e/0x730 [ath12k]
ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]
ath12k_update_stats_event+0x85/0x300 [ath12k]
ath12k_wmi_op_rx+0x624/0xd70 [ath12k]
ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k]
ath12k_ce_recv_process_cb+0x218/0x300 [ath12k]
ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k]
process_one_work+0x219/0x680
bh_worker+0x198/0x1f0
tasklet_action+0x13/0x30
handle_softirqs+0xca/0x460
__irq_exit_rcu+0xbe/0x110
irq_exit_rcu+0x9/0x30
common_interrupt+0xa7/0xc0
asm_common_interrupt+0x26/0x40
Fix this by calling ath12k_fw_stats_reset() before hardware unregister.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250507-fw-stats-mem-leak-v1-1-8d4d1d8ec0e8@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes
breaks and the log fills up with errors like:
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484
which based on a quick look at the ath11k driver seemed to indicate some
kind of ring-buffer corruption.
Miaoqing Pan tracked it down to the host seeing the updated destination
ring head pointer before the updated descriptor, and the error handling
for that in turn leaves the ring buffer in an inconsistent state.
While this has not yet been observed with ath12k, the ring-buffer
implementation is very similar to the ath11k one and it suffers from the
same bugs.
Add the missing memory barrier to make sure that the descriptor is read
after the head pointer to address the root cause of the corruption while
fixing up the error handling in case there are ever any (ordering) bugs
on the device side.
Note that the READ_ONCE() are only needed to avoid compiler mischief in
case the ring-buffer helpers are ever inlined.
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # 6.3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218623
Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com
Cc: Miaoqing Pan <quic_miaoqing@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Link: https://patch.msgid.link/20250321095219.19369-1-johan+linaro@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps
is not freed in the failure case, causing a memory leak. The following
trace is observed in kmemleak:
unreferenced object 0xffff8b3eb5789c00 (size 1024):
comm "softirq", pid 0, jiffies 4294942577
hex dump (first 32 bytes):
00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{...
01 00 00 00 00 00 00 00 01 00 00 00 1f 38 00 00 .............8..
backtrace (crc 44e1c357):
__kmalloc_noprof+0x30b/0x410
ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k]
ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]
ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k]
ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]
ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k]
ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k]
ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k]
ath12k_ce_recv_process_cb+0x218/0x300 [ath12k]
ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k]
process_one_work+0x219/0x680
bh_worker+0x198/0x1f0
tasklet_action+0x13/0x30
handle_softirqs+0xca/0x460
__irq_exit_rcu+0xbe/0x110
irq_exit_rcu+0x9/0x30
Free svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250430-wmi-mem-leak-v1-1-fcc9b49c2ddc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Introduce 'firmware-name' property to allow end-users and/or integrators to
decide which usecase-specific firmware to run on the WCN7850 platform. This
is necessary due to resource limitations such as memory capacity and CPU
capability, or performance and power optimization for different application
scenarios.
Currently, there are two firmwares, both files can be executed
interchangeably.
For example:
- ath12k/WCN7850/hw2.0/amss.bin,
ath12k/WCN7850/hw2.0/m3.bin
ath12k/WCN7850/hw2.0/board-2.bin
- ath12k/WCN7850/hw2.0/ncm825/amss.bin,
ath12k/WCN7850/hw2.0/ncm825/m3.bin
ath12k/WCN7850/hw2.0/board-2.bin
The former is the default firmware, suitable for most WiFi 7 STA functions.
The latter adds support for commercial-quality SAP and optimizes power
consumption for IoT applications. And both use the same BDF/regdb data
within the main board-2.bin.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250424005703.2479907-3-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Due to the change in the resource release order in ath12k_core_deinit(),
the resource release order in the AHB bus removal process needs to be
adjusted accordingly.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Fixes: 6cee30f0da75 ("wifi: ath12k: add AHB driver support for IPQ5332")
Signed-off-by: Yingying Tang <quic_yintang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250423055650.16230-3-quic_yintang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Ath12k panic notifier is registered in driver loading process. But it is not
unregistered if ATH12K_FLAG_QMI_FAIL is set(e.g. load BDF failed) and unload
driver. It causes a dirty node in panic notifier list since ath12k panic
notifier is not unregistered from list but the buffer of this node is freed
in driver unloading process. If load driver again there will be a page fault
error due to this dirty node in panic notifier list.
This issue is caused by asymmetry between ath12k_core_init() and
ath12k_core_deinit(). Reorder and relocate the release of resources in
ath12k_core_deinit() to avoid this asymmetry issue.
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __die_body+0x20/0x70
? __die+0x2b/0x40
? page_fault_oops+0x15d/0x500
? search_bpf_extables+0x63/0x90
? notifier_chain_register+0x21/0xe0
? search_exception_tables+0x5f/0x70
? kernelmode_fixup_or_oops.isra.0+0x61/0x80
? __bad_area_nosemaphore+0x179/0x240
? bad_area_nosemaphore+0x16/0x20
? do_user_addr_fault+0x312/0x7f0
? prb_read_valid+0x1c/0x30
? exc_page_fault+0x78/0x180
? asm_exc_page_fault+0x27/0x30
? notifier_chain_register+0x21/0xe0
? notifier_chain_register+0x55/0xe0
atomic_notifier_chain_register+0x2c/0x50
ath12k_core_init+0x7e/0x110 [ath12k]
ath12k_pci_probe+0xaba/0xba0 [ath12k]
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 809055628bce8 ("wifi: ath12k: add panic handler")
Signed-off-by: Yingying Tang <quic_yintang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250423055650.16230-2-quic_yintang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Print the data path related device specific stats in debugfs.
These device_dp_stats are exposed in the ath12k debugfs directory.
Output of device_dp_stats:
root@CDCWLEX0799743-LIN:/home/qctest#
cat /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/device_dp_stats
DEVICE RX STATS:
err ring pkts: 0
Invalid RBM: 0
RXDMA errors:
Overflow: 0
MPDU len: 0
FCS: 0
Decrypt: 0
TKIP MIC: 0
Unencrypt: 0
MSDU len: 0
MSDU limit: 0
WiFi parse: 0
AMSDU parse: 0
SA timeout: 0
DA timeout: 0
Flow timeout: 0
Flush req: 0
AMSDU frag: 0
Multicast echo: 0
AMSDU mismatch: 0
Unauth WDS: 0
AMSDU or WDS: 0
REO errors:
Desc addr zero: 0
Desc inval: 0
AMPDU in non BA: 0
Non BA dup: 0
BA dup: 0
Frame 2k jump: 0
BAR 2k jump: 0
Frame OOR: 155
BAR OOR: 0
No BA session: 0
Frame SN equal SSN: 0
PN check fail: 0
2k err: 0
PN err: 0
Desc blocked: 0
HAL REO errors:
ring0: 0
ring1: 0
ring2: 0
ring3: 0
ring4: 0
ring5: 0
ring6: 0
ring7: 0
DEVICE TX STATS:
TCL Ring Full Failures:
ring0: 0
ring1: 0
ring2: 0
ring3: 0
Misc Transmit Failures: 0
tx_wbm_rel_source: 0:986 1:0 2:0 3:57 4:0
tqm_rel_reason: 0:1043 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 14:0
fw_tx_status: 0:57 1:0 2:0 3:0 4:0 5:0 6:0
tx_enqueued: 0:329 1:145 2:464 3:105
tx_completed: 0:329 1:145 2:464 3:105
radio0 tx_pending: 0
REO Rx Received:
Ring1: 0:201 1:0 2:0
Ring2: 0:0 1:0 2:0
Ring3: 0:6152 1:0 2:0
Ring4: 0:9 1:0 2:0
Ring5: 0:0 1:0 2:0
Ring6: 0:0 1:0 2:0
Ring7: 0:0 1:0 2:0
Ring8: 0:0 1:0 2:0
Rx WBM REL SRC Errors:
TQM: 0:0 1:0 2:0
Rxdma: 0:0 1:0 2:0
Reo: 0:155 1:0 2:0
FW: 0:0 1:0 2:0
SW: 0:0 1:0 2:0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Mahendran P <quic_mahep@quicinc.com>
Link: https://patch.msgid.link/20250425012802.698914-4-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support for data path related device specific stats. This
information helps to debug connectivity and performance issues
in AP, STA, and Mesh modes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Mahendran P <quic_mahep@quicinc.com>
Link: https://patch.msgid.link/20250425012802.698914-3-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
To have consistent nomenclature, replace the use of the term "soc"
with the term "device".
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Mahendran P <quic_mahep@quicinc.com>
Link: https://patch.msgid.link/20250425012802.698914-2-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When processing a "station dump" command, the driver retrieves RSSI
values from the HAL_PHYRX_RSSI_LEGACY TLV received from the monitor
destination ring, and reports them to userspace. Currently, the RSSI
values reported are improper because the hardware has not been
configured to update them properly.
To fix this, enable the HTT_RX_FILTER_TLV_FLAGS_PPDU_START_USER_INFO in
the filter setup to ensure the correct RSSI values are returned in the
HAL_PHYRX_RSSI_LEGACY TLV, resulting in correct RSSI values being
reported to userspace.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00218-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Signed-off-by: Sowjanya vardhineni <quic_svardhin@quicinc.com>
Reviewed-by: Mahendran P <quic_mahep@quicinc.com>
Link: https://patch.msgid.link/20250424055104.2503723-1-quic_svardhin@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Explicitly include mod_devicetable.h for struct platform_device_id.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250512-dev-adp5589-fw-v3-22-092b14b79a88@analog.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
In cxlctl_get_supported_features(), there is a code block that handles
the case where the requested is equal to 0. But the code following the
code block can also handle this situation. So the code block is not
needed.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20250516143220.35302-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
idpf_features_check is used to validate the TX packet. skb header
length is compared with the hardware supported value received from
the device control plane. The value is stored in the adapter structure
and to access it, vport pointer is used. During reset all the vports
are released and the vport pointer that the netdev private structure
points to is NULL.
To avoid null-ptr-deref, store the max header length value in netdev
private structure. This also helps to cache the value and avoid
accessing adapter pointer in hot path.
BUG: kernel NULL pointer dereference, address: 0000000000000068
...
RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x154/0x520
? exc_page_fault+0x76/0x190
? asm_exc_page_fault+0x26/0x30
? idpf_features_check+0x6d/0xe0 [idpf]
netif_skb_features+0x88/0x310
validate_xmit_skb+0x2a/0x2b0
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x19d/0x3a0
__dev_queue_xmit+0xb74/0xe70
...
Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops")
Reviewed-by: Madhu Chititm <madhu.chittim@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If an aggregate has the following conditions:
- The SRIOV LAG DDP package has been enabled
- The bond is in 802.3ad LACP mode
- The bond is disqualified from supporting SRIOV VF LAG
- Both interfaces were added simultaneously to the bond (same command)
Then there is a chance that the two interfaces will be assigned different
LACP Aggregator ID's. This will cause a failure of the LACP control over
the bond.
To fix this, we can detect if the primary interface for the bond (as
defined by the driver) is not in switchdev mode, and exit the setup flow
if so.
Reproduction steps:
%> ip link add bond0 type bond mode 802.3ad miimon 100
%> ip link set bond0 up
%> ifenslave bond0 eth0 eth1
%> cat /proc/net/bonding/bond0 | grep Agg
Check for Aggregator IDs that differ.
Fixes: ec5a6c5f79ed ("ice: process events created by lag netdev event handler")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_vc_repr_add_mac() function indicates that it does not store the MAC
address filters in the firmware. However, it still increments vf->num_mac.
This is incorrect, as vf->num_mac should represent the number of MAC
filters currently programmed to firmware.
Indeed, we only perform this increment if the requested filter is a unicast
address that doesn't match the existing vf->hw_lan_addr. In addition,
ice_vc_repr_del_mac() does not decrement the vf->num_mac counter. This
results in the counter becoming out of sync with the actual count.
As it turns out, vf->num_mac is currently only used in legacy made without
port representors. The single place where the value is checked is for
enforcing a filter limit on untrusted VFs.
Upcoming patches to support VF Live Migration will use this value when
determining the size of the TLV for MAC address filters. Fix the
representor mode function to stop incrementing the counter incorrectly.
Fixes: ac19e03ef780 ("ice: allow process VF opcodes in different ways")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Per AM335x TRM[1](section 8.1.4.3 Power mode), in case of STANDBY,
PER domain should be ON. So, fix the PER power domain handling on standby.
[1] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250318230042.3138542-3-sbellary@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add Epoch Subsystem (EPSS) L3 provider support on SA8775P SoCs.
Current interconnect framework is based on static IDs for creating node
and registering with framework. This becomes a limitation for topologies
where there are multiple instances of same interconnect provider.
Modified interconnect framework APIs to create and link icc node with
dynamic IDs, this will help to overcome the dependency on static IDs.
* icc-sa8775p
dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
interconnect: core: Add dynamic id allocation support
interconnect: qcom: Add multidev EPSS L3 support
interconnect: qcom: icc-rpmh: Add dynamic icc node id support
interconnect: qcom: sa8775p: Add dynamic icc node id support
Link: https://lore.kernel.org/r/20250415095343.32125-1-quic_rlaggysh@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The mc_virt & clk_virt nodes are virtual and doesn't have associated registers,
thus the regmap config will fail with:
qnoc-sm8650 interconnect-0: error -EINVAL: invalid resource (null)
Remove the regmap config since QoS will never be applied to those virtual
nodes.
Reported-by: Pengyu Luo <mitltlatltl@gmail.com>
Fixes: 40ef9b6b778f ("interconnect: qcom: sm8650: enable QoS configuration")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250519-topic-sm8650-upstream-icc-qos-fix-v1-1-6ace779250aa@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
pcim_request_region_exclusive() was only needed for redirecting the
relatively exotic exclusive request functions in pci.c in case of them
operating in managed mode.
The managed nature has been removed from those functions and no one else
uses pcim_request_region_exclusive().
Remove pcim_request_region_exclusive().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-5-phasta@kernel.org
|
|
All functions based on __pci_request_region() and its release counter
part support "hybrid mode", where the functions become managed if the
PCI device was enabled with pcim_enable_device().
Removing this undesirable feature requires to remove all users who
activated their device with that function and use one of the affected
request functions.
These users were:
ASoC
alsa
cardreader
cirrus
i2c
mmc
mtd
mtd
mxser
net
spi
vdpa
vmwgfx
all of which have been ported to always-managed pcim_ functions by now.
The hybrid nature can, thus, be removed from the aforementioned PCI
functions.
Remove all function guards and documentation in pci.c related to the
hybrid redirection. Adjust the visibility of pcim_release_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-3-phasta@kernel.org
|
|
Merge the mmc fixes for v6.15-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add a new struct for platform data for the ti,am62-sdhci compatible to
apply additional quirks, namely "SDHCI_QUIRK2_SUPPRESS_V1P8_ENA", to
host controllers with am62 compatible.
Note, the fix was originally introduced by commit 941a7abd4666
("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch") but was
found to be applied too broadly and had to be reverted.
This fixes MMC init failures seen across am62x boards.
Fixes: ac5a41b472b4 ("Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"")
Fixes: 941a7abd4666 ("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch")
Cc: stable@vger.kernel.org
Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250516203121.3736379-1-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add X86 and SPI_MEM as dependencies for the spi_amd driver to ensure it is
built only on relevant platforms and with the required SPI memory
framework.
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250516100658.585654-4-Raju.Rangoju@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SPI index mode has hardware limitation of transferring only 64 bytes per
transaction due to fixed number of FIFO registers. This constraint leads to
performance issues when reading/writing data to/from NAND/NOR flash
devices, as the controller must issue multiple requests to read/write
64-byte chunks, even if the slave can transfer up to 2 or 4 KB in a single
transaction.
The AMD HID2 SPI controller supports DMA mode, allowing for reading/writing
up to 4 KB of data in a single transaction. The existing spi_amd driver
already supports HID2 DMA read operations.
This patch introduces changes to implement HID2 DMA single mode basic write
support for the HID2 SPI controller.
Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250516100658.585654-3-Raju.Rangoju@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add changes to replace the usage of read{q,b} MMIO accessors with direct
memory copy logic for reading data from DMA buffer.
Co-developed-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250516100658.585654-2-Raju.Rangoju@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Enrico Zanda
Tali Perry
Christophe JAILLET
Alexander Stein
Sudeep Holla
Chenyuan Yang
Zhang Songyi
Andy Shevchenko
Zhang Rui
Rafael J. Wysocki
Dmitry Torokhov
Qunqin Zhao
Longfang Liu
Jason Gunthorpe
Vignesh C
P Praneesh
Johan Hovold
Rajat Soni
Miaoqing Pan
Yingying Tang
Vinith Kumar R
Nuno Sá
Li Ming
Pavan Kumar Linga
Dave Ertman
Jacob Keller
Sukrut Bellary
Georgi Djakov
Neil Armstrong
Philipp Stanner
Ulf Hansson
Judith Mendez
Raju Rangoju