| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The cited commit fixed a crash when cma_netevent_callback was called for
a cma_id while work on that id from a previous call had not yet started.
The work item was re-initialized in the second call, which corrupted the
work item currently in the work queue.
However, it left a problem when queue_work fails (because the item is
still pending in the work queue from a previous call). In this case,
cma_id_put (which is called in the work handler) is therefore not
called. This results in a userspace process hang (zombie process).
Fix this by calling cma_id_put() if queue_work fails.
Fixes: 45f5dcdd0497 ("RDMA/cma: Fix workqueue crash in cma_netevent_work_handler")
Link: https://patch.msgid.link/r/4f3640b501e48d0166f312a64fdadf72b059bd04.1747827103.git.leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@nvidia.com>
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Following patches need the RDMA rc branch since we are past the RC cycle
now.
Merge conflicts resolved based on Linux-next:
- For RXE odp changes keep for-next version and fixup new places that
need to call is_odp_mr()
https://lore.kernel.org/r/20250422143019.500201bd@canb.auug.org.au
https://lore.kernel.org/r/20250514122455.3593b083@canb.auug.org.au
- irdma is keeping the while/kfree bugfix from -rc and the pf/cdev_info
change from for-next
https://lore.kernel.org/r/20250513130630.280ee6c5@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Merge cpufreq updates for 6.16-rc1:
- Refactor cpufreq_online(), add and use cpufreq policy locking guards,
use __free() in policy reference counting, and clean up core cpufreq
code on top of that (Rafael Wysocki).
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar).
- Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
Ugwekar).
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
Ugwekar).
- Add support for the "Requested CPU Min frequency" BIOS option to the
amd-pstate driver (Dhananjay Ugwekar).
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal).
- Add helper for governor checks to the schedutil cpufreq governor and
move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
- Populate the cpu_capacity sysfs entries from the intel_pstate driver
after registering asym capacity support (Ricardo Neri).
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki).
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor).
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab).
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu).
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng).
* pm-cpufreq: (31 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
cpufreq: intel_pstate: Populate the cpu_capacity sysfs entries
arch_topology: Relocate cpu_scale to topology.[h|c]
cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq
cpufreq/sched: schedutil: Add helper for governor checks
amd-pstate-ut: Reset amd-pstate driver mode after running selftests
cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option
cpufreq/amd-pstate: Add offline, online and suspend callbacks for amd_pstate_driver
cpufreq: Force sync policy boost with global boost on sysfs update
cpufreq: Preserve policy's boost state after resume
cpufreq: Introduce policy_set_boost()
cpufreq: Don't unnecessarily call set_boost()
...
|
|
Merge an ACPI resources management update, ACPI power management
updates, an ACPI platform profile driver fix and an ACPI documentation
update related to device properties for 6.16-rc1:
- Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
Bai).
- Add an LPS0 check() callback to the AMD pinctrl driver and fix up
config symbol dependencies in it (Mario Limonciello, Rafael Wysocki).
- Avoid initializing the ACPI platform profile driver on non-ACPI
platforms (Alexandre Ghiti).
- Document that references to ACPI data (non-device) nodes should use
string-only references in hierarchical data node packages (Sakari
Ailus).
* acpi-resource:
ACPI: resource: fix a typo for MECHREVO in irq1_edge_low_force_override[]
* acpi-pm:
pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops'
pinctrl: amd: Add an LPS0 check() callback
ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case
* acpi-platform-profile:
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
* acpi-docs:
Documentation: ACPI: Use all-string data node references
|
|
Merge an ACPI PCI root driver update, ACPI battery driver updates, an
ACPI EC driver update and APEI updates for 6.16-rc1:
- Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into a
const pointer (Pei Xiao).
- Round battery capacity percengate in the ACPI battery driver to the
closest integer to avoid user confusion (shitao).
- Make the ACPI battery driver report the current as a negative number
to the power supply framework when the battery is discharging as
documented (Peter Marheine).
- Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[] list
to prevent spurious wakeups from suspend-to-idle (Werner Sembach).
- Convert the APEI EINJ driver to a faux device one (Sudeep Holla, Jon
Hunter).
- Remove redundant calls to einj_get_available_error_type() from the
APEI EINJ driver (Zaid Alali).
* acpi-pci:
ACPI: PCI: Constify fwnode_handle in acpi_pci_root_remap_iospace()
* acpi-battery:
ACPI: battery: negate current when discharging
ACPI: battery: Round capacity percengate to closest integer
* acpi-ec:
ACPI: EC: Add device to acpi_ec_no_wakeup[] qurik list
* acpi-apei:
ACPI: APEI: EINJ: Remove redundant calls to einj_get_available_error_type()
ACPI: APEI: EINJ: Fix probe error message
ACPI: APEI: EINJ: Transition to the faux device interface
|
|
Merge ACPI processor driver updates and ACPI CPPC library updates for
6.16-rc1:
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui).
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich).
- Simplify PCC shared memory region handling (Sudeep Holla).
- Rework and extend functions for reading CPPC register values and for
updating CPPC registers (Lifeng Zheng).
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng).
* acpi-processor:
ACPI: processor: idle: Remove redundant pr->power.count assignment
ACPI: processor: idle: Set pr->flags.power unconditionally
ACPI: processor: idle: Remove obsolete comment
* acpi-cppc:
ACPI: CPPC: Add three functions related to autonomous selection
ACPI: CPPC: Modify cppc_get_auto_sel_caps() to cppc_get_auto_sel()
ACPI: CPPC: Refactor register value get and set ABIs
ACPI: CPPC: Add cppc_set_reg_val()
ACPI: CPPC: Extract cppc_get_reg_val_in_pcc()
ACPI: CPPC: Rename cppc_get_perf() to cppc_get_reg_val()
ACPI: CPPC: Optimize cppc_get_perf()
ACPI: CPPC: Add IS_OPTIONAL_CPC_REG macro to judge if a cpc_reg is optional
ACPI: CPPC: Simplify PCC shared memory region handling
ACPI: PCC: Simplify PCC shared memory region handling
|
|
Merge updates related to the handling of static (data-only) ACPI tables
for 6.16-rc1:
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook).
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil Keshavamurthy).
- Remove an (explicitly) unused header file include from the VIOT ACPI
table parser file (Andy Shevchenko).
- Improve logging around acpi_initialize_tables() (Bartosz Szczepanek).
* acpi-tables:
ACPI: MRRM: Fix default max memory region
ACPI: tables: Improve logging around acpi_initialize_tables()
ACPI: VIOT: Remove (explicitly) unused header
ACPI: Add documentation for exposing MRRM data
ACPI: MRRM: Add /sys files to describe memory ranges
ACPI: MRRM: Minimal parse of ACPI MRRM table
ACPI: tables: Add __nonstring annotations for unterminated strings
|
|
Merge ACPICA updates, including two upstream releases 20241212 and
20250404, for 6.16-rc1:
- Fix two ACPICA SLAB cache leaks (Seunghun Han).
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification and
the code (Zaid Alali).
- Fix typo in comments for SRAT structures (Adam Lackorzynski).
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre).
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin).
- Add support for printing AML arguments when the ACPICA debug level is
ACPI_LV_TRACE_POINT (Mario Limonciello).
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla).
- Apply pack(1) to union aml_resource (Tamir Duberstein).
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk).
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman).
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck).
- Add definitions for RIMT to ACPICA (Sunil V L).
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King).
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck).
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem).
- Rename structure and field names of the RAS2 table in actbl2.h (Shiju
Jose).
- Fix up whitespace in acpica/utcache.c (Zhe Qiao).
- Avoid sequence overread in a call to strncmp() in ap_get_table_length()
and replace strncpy() with memcpy() in ACPICA in some places (Ahmed
Salem).
- Update copyright year in all ACPICA files (Saket Dumbre).
* acpica: (30 commits)
ACPICA: Update copyright year
ACPICA: Logfile: Changes for version 20250404
ACPICA: Replace strncpy() with memcpy()
ACPICA: Apply ACPI_NONSTRING in more places
ACPICA: Avoid sequence overread in call to strncmp()
ACPICA: Adjust the position of code lines
ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
ACPICA: Apply ACPI_NONSTRING
ACPICA: Introduce ACPI_NONSTRING
ACPICA: actbl2.h: ERDT: Add typedef and other definitions
ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
ACPICA: Utilities: Fix spelling mistake "Incremement" -> "Increment"
ACPICA: MRRM: Some cleanups
ACPICA: actbl2: Add definitions for RIMT
ACPICA: actbl2.h: MRRM: Add typedef and other definitions
ACPICA: infrastructure: Add new header and ACPI_DMT_BUF26 types
ACPICA: Interpret SIDP structures in DMAR
ACPICA: utilities: Fix overflow check in vsnprintf()
ACPICA: Apply pack(1) to union aml_resource
ACPICA: Drop stale comment about the header file content
...
|
|
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-05-22
this is a pull request of 22 patches for net-next/main.
The series by Biju Das contains 19 patches and adds RZ/G3E CANFD
support to the rcar_canfd driver.
The patch by Vincent Mailhol adds a struct data_bittiming_params to
group FD parameters as a preparation patch for CAN-XL support.
Felix Maurer's patch imports tst-filter from can-tests into the kernel
self tests and Vincent Mailhol adds support for physical CAN
interfaces.
linux-can-next-for-6.16-20250522
* tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
selftests: can: test_raw_filter.sh: add support of physical interfaces
selftests: can: Import tst-filter from can-tests
can: dev: add struct data_bittiming_params to group FD parameters
can: rcar_canfd: Add RZ/G3E support
can: rcar_canfd: Enhance multi_channel_irqs handling
can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_info
can: rcar_canfd: Update RCANFD_GAFLCFG macro
can: rcar_canfd: Add rcar_canfd_setrnc()
can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro
can: rcar_canfd: Update RCANFD_GERFL_ERR macro
can: rcar_canfd: Drop RCANFD_GAFLCFG_GETRNC macro
can: rcar_canfd: Use of_get_available_child_by_name()
...
====================
Link: https://patch.msgid.link/20250522084128.501049-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Send link events one after another otherwise new message
is overwriting the message which is being processed by PF.
Fixes: a88e0f936ba9 ("octeontx2: Detect the mbox up or down message via register")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747823443-404-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to improve packet processing and packet forwarding
performances, EN7581 SoC supports consuming SRAM instead of DRAM for
hw forwarding descriptors queue.
For downlink hw accelerated traffic request to consume SRAM memory
for hw forwarding descriptors queue.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-4-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In some configurations QDMA blocks require a contiguous block of
system memory for hwfd buffers queue. Introduce the capability to allocate
hw buffers forwarding queue via the reserved-memory DTS property instead of
running dmam_alloc_coherent().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-3-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since hfwd descriptor and buffer queues are allocated via
dmam_alloc_coherent() we do not need to store their references
in airoha_qdma struct. This patch does not introduce any logical changes,
just code clean-up.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-2-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since .mac_link_up and .mac_link_down are changed for AML 25G/10G NICs,
the SR-IOV related function should be invoked in these new functions, to
bring VFs link up.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/BA8B302B7AAB6EA6+20250521064402.22348-10-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support PTP clock and 1PPS output signal for AML devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/F2F6E5E8899D2C20+20250521064402.22348-9-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The new added mailbox commands require a new released firmware version.
Otherwise, a lot of logs "Unknown FW command" would be printed. And the
devices may not work properly. So add the test command in the probe
function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/18283F17BE0FA335+20250521064402.22348-8-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For AML 25G/10G devices, some of the information returned from
phylink_ethtool_ksettings_get() is not correct, since there is a
fixed-link mode. So add additional corrections.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C94BF867617C544D+20250521064402.22348-7-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver needs to handle GPIO interrupts to identify SFP module and
configure PHY by sending mailbox messages to firmware.
Since the SFP module needs to wait for ready to get information when it
is inserted, workqueue is added to handle delayed tasks. And each SW-FW
interaction takes time to wait, so they are processed in the workqueue
instead of IRQ handler function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/399624AF221E8E28+20250521064402.22348-6-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a new PHY attached to AML 25G/10G NIC, which is different from
SP 10G/1G NIC. But the PHY configuration is handed over to firmware, and
also I2C is controlled by firmware. So the different PHYLINK fixed-link
mode is added for these devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/987B973A5929CD48+20250521064402.22348-5-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For the following patches to support PHYLINK for AML 25G devices,
separate MAC type wx_mac_aml40 to maintain the driver of 40G devices.
Because 40G devices will complete support later, not now.
And this patch makes the 25G devices use some PHYLINK interfaces, but it
is not yet create PHYLINK and cannot be used on its own. It is just
preparation for the next patches.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/592B1A6920867D0C+20250521064402.22348-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most of the different code that requires MAC type in the common library
is due to NGBE only supports a few queues and pools, unlike TXGBE, which
supports 128 queues and 64 pools. This difference accounts for most of
the hardware configuration differences in the driver code. So add a flag
bit "WX_FLAG_MULTI_64_FUNC" for them to clean-up the driver code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C731132E124D75E5+20250521064402.22348-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since AML devices are going to reuse some definitions, remove the "SP"
qualifier from these definitions.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8EF712EC14B8FF70+20250521064402.22348-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull final writepage conversion from Christian Brauner:
"This converts vboxfs from ->writepage() to ->writepages().
This was the last user of the ->writepage() method. So remove
->writepage() completely and all references to it"
* tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove aops->writepage
mm: Remove swap_writepage() and shmem_writepage()
ttm: Call shmem_writeout() from ttm_backup_backup_page()
i915: Use writeback_iter()
shmem: Add shmem_writeout()
writeback: Remove writeback_use_writepage()
migrate: Remove call to ->writepage
vboxsf: Convert to writepages
9p: Add a migrate_folio method
|
|
The KSZ9477 switch driver uses the XPCS driver to operate its SGMII
port. However there are some hardware bugs in the KSZ9477 SGMII
module so workarounds are needed. There was a proposal to update the
XPCS driver to accommodate KSZ9477, but the new code is not generic
enough to be used by other vendors. It is better to do all these
workarounds inside the KSZ9477 driver instead of modifying the XPCS
driver.
There are 3 hardware issues. The first is the MII_ADVERTISE register
needs to be write once after reset for the correct code word to be
sent. The XPCS driver disables auto-negotiation first before
configuring the SGMII/1000BASE-X mode and then enables it back. The
KSZ9477 driver then writes the MII_ADVERTISE register before enabling
auto-negotiation. In 1000BASE-X mode the MII_ADVERTISE register will
be set, so KSZ9477 driver does not need to write it.
The second issue is the MII_BMCR register needs to set the exact speed
and duplex mode when running in SGMII mode. During link polling the
KSZ9477 will check the speed and duplex mode are different from
previous ones and update the MII_BMCR register accordingly.
The last issue is 1000BASE-X mode does not work with auto-negotiation
on. The cause is the local port hardware does not know the link is up
and so network traffic is not forwarded. The workaround is to write 2
additional bits when 1000BASE-X mode is configured.
Note the SGMII interrupt in the port cannot be masked. As that
interrupt is not handled in the KSZ9477 driver the SGMII interrupt bit
will not be set even when the XPCS driver sets it.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250520230720.23425-1-Tristram.Ha@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull vfs directory lookup updates from Christian Brauner:
"This contains cleanups for the lookup_one*() family of helpers.
We expose a set of functions with names containing "lookup_one_len"
and others without the "_len". This difference has nothing to do with
"len". It's rater a historical accident that can be confusing.
The functions without "_len" take a "mnt_idmap" pointer. This is found
in the "vfsmount" and that is an important question when choosing
which to use: do you have a vfsmount, or are you "inside" the
filesystem. A related question is "is permission checking relevant
here?".
nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
functions. They pass nop_mnt_idmap and refuse to work on filesystems
which have any other idmap.
This work changes nfsd and cachefile to use the lookup_one family of
functions and to explictily pass &nop_mnt_idmap which is consistent
with all other vfs interfaces used where &nop_mnt_idmap is explicitly
passed.
The remaining uses of the "_one" functions do not require permission
checks so these are renamed to be "_noperm" and the permission
checking is removed.
This series also changes these lookup function to take a qstr instead
of separate name and len. In many cases this simplifies the call"
* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: change lookup_one_common and lookup_noperm_common to take a qstr
Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
VFS: rename lookup_one_len family to lookup_noperm and remove permission check
cachefiles: Use lookup_one() rather than lookup_one_len()
nfsd: Use lookup_one() rather than lookup_one_len()
VFS: improve interface for lookup_one functions
|
|
Syzkaller, courtesy of syzbot, identified an error (see report [1]) in
aqc111 driver, caused by incomplete sanitation of usb read calls'
results. This problem is quite similar to the one fixed in commit
920a9fa27e78 ("net: asix: add proper error handling of usb read errors").
For instance, usbnet_read_cmd() may read fewer than 'size' bytes,
even if the caller expected the full amount, and aqc111_read_cmd()
will not check its result properly. As [1] shows, this may lead
to MAC address in aqc111_bind() being only partly initialized,
triggering KMSAN warnings.
Fix the issue by verifying that the number of bytes read is
as expected and not less.
[1] Partial syzbot report:
BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
BUG: KMSAN: uninit-value in usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
really_probe+0x4d1/0xd90 drivers/base/dd.c:658
__driver_probe_device+0x268/0x380 drivers/base/dd.c:800
...
Uninit was stored to memory at:
dev_addr_mod+0xb0/0x550 net/core/dev_addr_lists.c:582
__dev_addr_set include/linux/netdevice.h:4874 [inline]
eth_hw_addr_set include/linux/etherdevice.h:325 [inline]
aqc111_bind+0x35f/0x1150 drivers/net/usb/aqc111.c:717
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
...
Uninit was stored to memory at:
ether_addr_copy include/linux/etherdevice.h:305 [inline]
aqc111_read_perm_mac drivers/net/usb/aqc111.c:663 [inline]
aqc111_bind+0x794/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
...
Local variable buf.i created at:
aqc111_read_perm_mac drivers/net/usb/aqc111.c:656 [inline]
aqc111_bind+0x221/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
Reported-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b6b9ff7b80430020c7b
Tested-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com
Fixes: df2d59a2ab6c ("net: usb: aqc111: Add support for getting and setting of MAC address")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250520113240.2369438-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The function max14577_reg_get_current_limit() calls the function
max14577_read_reg(), but does not check its return value. A proper
implementation can be found in max14577_get_online().
Add a error check for the max14577_read_reg() and return error code
if the function fails.
Fixes: b0902bbeb768 ("regulator: max14577: Add regulator driver for Maxim 14577")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250526025627.407-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct thermal_zone_device_ops' could be left unmodified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
While at it, also constify a struct thermal_zone_params.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
26422 12584 512 39518 9a5e drivers/platform/x86/acerhdf.o
After:
=====
text data bss dec hex filename
26646 12360 512 39518 9a5e drivers/platform/x86/acerhdf.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e502fadf2c6b24fc4ec3a7880533f7ca68429720.1748177235.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943
Fixes: 8853750dbad8 ("drm/i915: Enable SDP split for DP2.0")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
(cherry picked from commit 56764c845aa5be14cd53702fc9f2da23e25857de)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Merge operating performance points (OPP) updates for 6.16 from Viresh
Kumar:
"- OPP: Add dev_pm_opp_set_level() (Praveen Talari).
- Introduce scope-based cleanup headers and mutex locking guards in OPP
core (Viresh Kumar).
- switch to use kmemdup_array() (Zhang Enpei)."
* tag 'opp-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: switch to use kmemdup_array()
OPP: Add dev_pm_opp_set_level()
OPP: Use mutex locking guards
OPP: Define and use scope-based cleanup helpers
OPP: Use scope-based OF cleanup helpers
OPP: Return opp_table from dev_pm_opp_get_opp_table_ref()
OPP: Return opp from dev_pm_opp_get()
OPP: Remove _get_opp_table_kref()
|
|
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets().
The code uses mock_coeff_template.length_bytes (4 bytes) for register value
allocations. But later, this length is set to 8 bytes which causes
test code failures.
As fix, just remove the lenght override, keeping the original value 4
for all operations.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523154151.1252585-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(),
because the source string length was rounded up to the allocation size.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523155814.1256762-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation")
removed legacy interface functions, breaking < v5.0 controllers support.
In order to fix older controllers we need to add an alternative exec_op
implementation which doesn't rely on low level registers.
Fixes: 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The function sunxi_nfc_hw_ecc_write_chunk() calls the
sunxi_nfc_hw_ecc_write_chunk(), but does not call the configuration
function sunxi_nfc_randomizer_config(). Consequently, the randomization
might not conduct correctly, which will affect the lifespan of NAND flash.
A proper implementation can be found in sunxi_nfc_hw_ecc_write_page_dma().
Add the sunxi_nfc_randomizer_config() to config randomizer.
Fixes: 4be4e03efc7f ("mtd: nand: sunxi: add randomizer support")
Cc: stable@vger.kernel.org # v4.6
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Signal vt subsystem to redraw console when switching to dummycon
with deferred takeover enabled. Makes the console switch to fbcon
and displays the available output.
With deferred takeover enabled, dummycon acts as the placeholder
until the first output to the console happens. At that point, fbcon
takes over. If the output happens while dummycon is not active, it
cannot inform fbcon. This is the case if the vt subsystem runs in
graphics mode.
A typical graphical boot starts plymouth, a display manager and a
compositor; all while leaving out dummycon. Switching to a text-mode
console leaves the console with dummycon even if a getty terminal
has been started.
Returning true from dummycon's con_switch helper signals the vt
subsystem to redraw the screen. If there's output available dummycon's
con_putc{s} helpers trigger deferred takeover of fbcon, which sets a
display mode and displays the output. If no output is available,
dummycon remains active.
v2:
- make the comment slightly more verbose (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1242191
Tested-by: Andrei Borzenkov <arvidjaar@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 83d83bebf401 ("console/fbcon: Add support for deferred console takeover")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://lore.kernel.org/r/20250520071418.8462-1-tzimmermann@suse.de
|
|
The driver currently uses dev_err for messages that have a very low probability
of being read by the user as the error will probably never happen and the
systems with the RTC probably don't have any user able to read the message.
Moreover, the only user action after getting this message is the restart the
action so drop the level to dev_dbg.
Link: https://lore.kernel.org/r/20250525222153.1472917-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The ocillator on the m41t62 (and other chips of this type) needs
a kickstart upon a failure; the RTC read routine will notice the
oscillator failure and fail reads. This is added in the RTC write
routine; this allows the system to know that the time in the RTC
is accurate. This is following the procedure described in section
3.11 of "https://www.st.com/resource/en/datasheet/m41t62.pdf"
Signed-off-by: A. Niyas Ahamed Mydeen <nmydeen@mvista.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20250402120546.336657-2-nmydeen@mvista.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add a RTC driver for NXP S32G2/S32G3 SoCs.
RTC tracks clock time during system suspend. It can be a wakeup source
for the S32G2/S32G3 SoC based boards.
The RTC module from S32G2/S32G3 is not battery-powered and it is not kept
alive during system reset.
Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Link: https://lore.kernel.org/r/20250403103346.3064895-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When CONFIG_HWMON is built as a loadable module, the HSMP drivers
cannot be built-in:
ERROR: modpost: "hsmp_create_sensor" [drivers/platform/x86/amd/hsmp/amd_hsmp.ko] undefined!
ERROR: modpost: "hsmp_create_sensor" [drivers/platform/x86/amd/hsmp/hsmp_acpi.ko] undefined!
Enforce that through the usual Kconfig dependnecy trick.
Fixes: 92c025db52bb ("platform/x86/amd/hsmp: Report power via hwmon sensors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250522144422.2824083-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The patch "Refactor Ally suspend/resume" introduced an
acpi_s2idle_dev_ops for use with ROG Ally which caused a build error
if CONFIG_SUSPEND was not defined.
Signed-off-by: Luke Jones <luke@ljones.dev>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505090418.DaeaXe4i-lkp@intel.com/
Fixes: feea7bd6b02d ("platform/x86: asus-wmi: Refactor Ally suspend/resume")
Link: https://lore.kernel.org/r/20250524101343.57883-2-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Correct spelling of platforms, various, and initial.
As flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus
psrom, as 16-bit little-endian values. However, the integer fields of
t_SROM are host byte order.
In the case of the led_mode field this results in a but which has been
addressed by commit e7e5ae71831c ("net: dlink: Correct endianness
handling of led_mode").
In the case of the remaining fields, which are updated by this patch,
I do not believe this does not result in any bugs. But it does seem
best to correctly annotate the endianness of integers.
Flagged by Sparse as:
.../dl2k.c:344:35: warning: restricted __le32 degrades to integer
Compile tested only.
No run-time change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The AF driver assigns reserved MCAM entries (for unicast, broadcast,
etc.) based on the NIXLF number. When a NIXLF is detached, these entries
are disabled.
For example,
PF NIXLF
--------------------
PF0 0
SDP-VF0 1
If the user unbinds both PF0 and SDP-VF0 interfaces and then binds them in
reverse order
PF NIXLF
---------------------
SDP-VF0 0
PF0 1
In this scenario, the PF0 unicast entry is getting corrupted because
the MCAM entry contains stale data (SDP-VF0 ucast data)
This patch resolves the issue by clearing the unicast MCAM entry during
NIXLF detach
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently checks if the user is querying VF RoCE statistics.
It will not send the query_roce_stats_ext HWRM command if it is for a
VF. But Thor2 VF can support extended statistics.
Allow query of extended stats for Thor2 VFs.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Link: https://patch.msgid.link/20250523075952.1267827-1-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Avoid using __le32 directly in trace events to fix sparse complains:
drivers/infiniband/hw/hns/./hns_roce_trace.h:48:1: sparse: sparse: cast to restricted __le32
drivers/infiniband/hw/hns/./hns_roce_trace.h:48:1: sparse: sparse: restricted __le32 degrades to integer
drivers/infiniband/hw/hns/./hns_roce_trace.h:48:1: sparse: sparse: restricted __le32 degrades to integer
drivers/infiniband/hw/hns/./hns_roce_trace.h:90:1: sparse: sparse: cast to restricted __le32
drivers/infiniband/hw/hns/./hns_roce_trace.h:90:1: sparse: sparse: restricted __le32 degrades to integer
drivers/infiniband/hw/hns/./hns_roce_trace.h:90:1: sparse: sparse: restricted __le32 degrades to integer
drivers/infiniband/hw/hns/./hns_roce_trace.h:173:1: sparse: sparse: cast to restricted __le32
drivers/infiniband/hw/hns/./hns_roce_trace.h:173:1: sparse: sparse: restricted __le32 degrades to integer
drivers/infiniband/hw/hns/./hns_roce_trace.h:173:1: sparse: sparse: restricted __le32 degrades to integer
Fixes: 6c98c8670806 ("RDMA/hns: Add trace for WQE dumping")
Fixes: 1e63e2f96613 ("RDMA/hns: Add trace for AEQE dumping")
Fixes: 6bd18dabf1c9 ("RDMA/hns: Add trace for CMDQ dumping")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505170327.TNOpreil-lkp@intel.com/
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250523023433.2171003-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The following warning is reported by sparse tool:
drivers/infiniband/hw/mlx5/fs.c:1664:26: warning: array of flexible
structures
Avoid it by simply splitting array into two separate structs.
Link: https://patch.msgid.link/7b891b96a9fc053d01284c184d25ae98d35db2d4.1747827041.git.leon@kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Drop ib_send_cm_mra parameters which are always constant. Remove branch
which is never taken. Adjust name to ib_prepare_cm_mra, which better
reflects its functionality - no MRA is actually sent. Adjust name of
related tracepoints. Push setting of the constant service timeout to
cm.c and drop IB_CM_MRA_FLAG_DELAY.
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Sean Hefty <shefty@nvidia.com>
Link: https://patch.msgid.link/cdd2a237acf2b495c19ce02e4b1c42c41c6751c2.1747827207.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Drivers such as rxe, which use virtual DMA, must not call into the DMA
mapping core since they lack physical DMA capabilities. Otherwise, a NULL
pointer dereference is observed as shown below. This patch ensures the RDMA
core handles virtual and physical DMA paths appropriately.
This fixes the following kernel oops:
BUG: kernel NULL pointer dereference, address: 00000000000002fc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1028eb067 P4D 1028eb067 PUD 105da0067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 3 UID: 1000 PID: 1854 Comm: python3 Tainted: G W 6.15.0-rc1+ #11 PREEMPT(voluntary)
Tainted: [W]=WARN
Hardware name: Trigkey Key N/Key N, BIOS KEYN101 09/02/2024
RIP: 0010:hmm_dma_map_alloc+0x25/0x100
Code: 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 49 89 d6 49 c1 e6 0c 41 55 41 54 53 49 39 ce 0f 82 c6 00 00 00 49 89 fc <f6> 87 fc 02 00 00 20 0f 84 af 00 00 00 49 89 f5 48 89 d3 49 89 cf
RSP: 0018:ffffd3d3420eb830 EFLAGS: 00010246
RAX: 0000000000001000 RBX: ffff8b727c7f7400 RCX: 0000000000001000
RDX: 0000000000000001 RSI: ffff8b727c7f74b0 RDI: 0000000000000000
RBP: ffffd3d3420eb858 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 00007262a622a000 R14: 0000000000001000 R15: ffff8b727c7f74b0
FS: 00007262a62a1080(0000) GS:ffff8b762ac3e000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002fc CR3: 000000010a1f0004 CR4: 0000000000f72ef0
PKRU: 55555554
Call Trace:
<TASK>
ib_init_umem_odp+0xb6/0x110 [ib_uverbs]
ib_umem_odp_get+0xf0/0x150 [ib_uverbs]
rxe_odp_mr_init_user+0x71/0x170 [rdma_rxe]
rxe_reg_user_mr+0x217/0x2e0 [rdma_rxe]
ib_uverbs_reg_mr+0x19e/0x2e0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd9/0x150 [ib_uverbs]
ib_uverbs_cmd_verbs+0xd19/0xee0 [ib_uverbs]
? mmap_region+0x63/0xd0
? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]
ib_uverbs_ioctl+0xba/0x130 [ib_uverbs]
__x64_sys_ioctl+0xa4/0xe0
x64_sys_call+0x1178/0x2660
do_syscall_64+0x7e/0x170
? syscall_exit_to_user_mode+0x4e/0x250
? do_syscall_64+0x8a/0x170
? do_syscall_64+0x8a/0x170
? syscall_exit_to_user_mode+0x4e/0x250
? do_syscall_64+0x8a/0x170
? syscall_exit_to_user_mode+0x4e/0x250
? do_syscall_64+0x8a/0x170
? do_user_addr_fault+0x1d2/0x8d0
? irqentry_exit_to_user_mode+0x43/0x250
? irqentry_exit+0x43/0x50
? exc_page_fault+0x93/0x1d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7262a6124ded
Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00
RSP: 002b:00007fffd08c3960 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fffd08c39f0 RCX: 00007262a6124ded
RDX: 00007fffd08c3a10 RSI: 00000000c0181b01 RDI: 0000000000000007
RBP: 00007fffd08c39b0 R08: 0000000014107820 R09: 00007fffd08c3b44
R10: 000000000000000c R11: 0000000000000246 R12: 00007fffd08c3b44
R13: 000000000000000c R14: 00007fffd08c3b58 R15: 0000000014107960
</TASK>
Fixes: 1efe8c0670d6 ("RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage")
Closes: https://lore.kernel.org/all/3e8f343f-7d66-4f7a-9f08-3910623e322f@gmail.com/
Signed-off-by: Daisuke Matsuda <dskmtsd@gmail.com>
Link: https://patch.msgid.link/20250524144328.4361-1-dskmtsd@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices")
addressed a use-after-free where devices could be released without first
being removed from the binder_devices list. However, there is a similar
path in binder_free_proc() that was missed:
==================================================================
BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100
Write of size 8 at addr ffff0000c773b900 by task umount/467
CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_remove_device+0xd4/0x100
binderfs_evict_inode+0x230/0x2f0
evict+0x25c/0x5dc
iput+0x304/0x480
dentry_unlink_inode+0x208/0x46c
__dentry_kill+0x154/0x530
[...]
Allocated by task 463:
__kmalloc_cache_noprof+0x13c/0x324
binderfs_binder_device_create.isra.0+0x138/0xa60
binder_ctl_ioctl+0x1ac/0x230
[...]
Freed by task 215:
kfree+0x184/0x31c
binder_proc_dec_tmpref+0x33c/0x4ac
binder_deferred_func+0xc10/0x1108
process_one_work+0x520/0xba4
[...]
==================================================================
Call binder_remove_device() within binder_free_proc() to ensure the
device is removed from the binder_devices list before being kfreed.
Cc: stable@vger.kernel.org
Fixes: 12d909cac1e1 ("binderfs: add new binder devices to binder_devices")
Reported-by: syzbot+4af454407ec393de51d6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4af454407ec393de51d6
Tested-by: syzbot+4af454407ec393de51d6@syzkaller.appspotmail.com
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250524220758.915028-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Jack Morgenstein
Jason Gunthorpe
Rafael J. Wysocki
Paolo Abeni
Subbaraya Sundeep
Lorenzo Bianconi
Jiawen Wu
Linus Torvalds
Tristram Ha
Nikita Zhandarovich
Wentao Liang
Christophe JAILLET
Imre Deak
Jaroslav Kysela
Álvaro Fernández Rojas
Thomas Zimmermann
Alexandre Belloni
A. Niyas Ahamed Mydeen
Ciprian Marian Costea
Arnd Bergmann
Luke Jones
Simon Horman
Hariprasad Kelam
Ajit Khaparde
Junxian Huang
Leon Romanovsky
Vlad Dumitrescu
Daisuke Matsuda
Carlos Llamas