aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-17userfaultfd: shmem: handle coredumping in handle_userfault()Andrea Arcangeli1-8/+21
Anon and hugetlbfs handle FOLL_DUMP set by get_dump_page() internally to __get_user_pages(). shmem as opposed has no special FOLL_DUMP handling there so handle_mm_fault() is invoked without mmap_sem and ends up calling handle_userfault() that isn't expecting to be invoked without mmap_sem held. This makes handle_userfault() fail immediately if invoked through shmem_vm_ops->fault during coredumping and solves the problem. The side effect is a BUG_ON with no lock held triggered by the coredumping process which exits. Only 4.11 is affected, pre-4.11 anon memory holes are skipped in __get_user_pages by checking FOLL_DUMP explicitly against empty pagetables (mm/gup.c:no_page_table()). It's zero cost as we already had a check for current->flags to prevent futex to trigger userfaults during exit (PF_EXITING). Link: http://lkml.kernel.org/r/20170615214838.27429-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-17mm: numa: avoid waiting on freed migrated pagesMark Rutland1-1/+7
In do_huge_pmd_numa_page(), we attempt to handle a migrating thp pmd by waiting until the pmd is unlocked before we return and retry. However, we can race with migrate_misplaced_transhuge_page(): // do_huge_pmd_numa_page // migrate_misplaced_transhuge_page() // Holds 0 refs on page // Holds 2 refs on page vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd); /* ... */ if (pmd_trans_migrating(*vmf->pmd)) { page = pmd_page(*vmf->pmd); spin_unlock(vmf->ptl); ptl = pmd_lock(mm, pmd); if (page_count(page) != 2)) { /* roll back */ } /* ... */ mlock_migrate_page(new_page, page); /* ... */ spin_unlock(ptl); put_page(page); put_page(page); // page freed here wait_on_page_locked(page); goto out; } This can result in the freed page having its waiters flag set unexpectedly, which trips the PAGE_FLAGS_CHECK_AT_PREP checks in the page alloc/free functions. This has been observed on arm64 KVM guests. We can avoid this by having do_huge_pmd_numa_page() take a reference on the page before dropping the pmd lock, mirroring what we do in __migration_entry_wait(). When we hit the race, migrate_misplaced_transhuge_page() will see the reference and abort the migration, as it may do today in other cases. Fixes: b8916634b77bffb2 ("mm: Prevent parallel splits during THP migration") Link: http://lkml.kernel.org/r/1497349722-6731-2-git-send-email-will.deacon@arm.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-17swap: cond_resched in swap_cgroup_prepare()Yu Zhao1-0/+3
I saw need_resched() warnings when swapping on large swapfile (TBs) because continuously allocating many pages in swap_cgroup_prepare() took too long. We already cond_resched when freeing page in swap_cgroup_swapoff(). Do the same for the page allocation. Link: http://lkml.kernel.org/r/20170604200109.17606-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-17mm/memory-failure.c: use compound_head() flags for huge pagesJames Morse1-1/+4
memory_failure() chooses a recovery action function based on the page flags. For huge pages it uses the tail page flags which don't have anything interesting set, resulting in: > Memory failure: 0x9be3b4: Unknown page state > Memory failure: 0x9be3b4: recovery action for unknown page: Failed Instead, save a copy of the head page's flags if this is a huge page, this means if there are no relevant flags for this tail page, we use the head pages flags instead. This results in the me_huge_page() recovery action being called: > Memory failure: 0x9b7969: recovery action for huge page: Delayed For hugepages that have not yet been allocated, this allows the hugepage to be dequeued. Fixes: 524fca1e7356 ("HWPOISON: fix misjudgement of page_action() for errors on mlocked pages") Link: http://lkml.kernel.org/r/20170524130204.21845-1-james.morse@arm.com Signed-off-by: James Morse <james.morse@arm.com> Tested-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-16fs: pass on flags in compat_writevChristoph Hellwig1-1/+1
Fixes: 793b80ef14af ("vfs: pass a flags argument to vfs_readv/vfs_writev") Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-16objtool: Add fortify_panic as __noreturn functionKees Cook1-1/+2
CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function, so objtool needs to know about it too. Suggested-by: Daniel Micay <danielmicay@gmail.com> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1497532835-32704-1-git-send-email-jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-16powerpc/debug: Add missing warn flag to WARN_ON's non-builtin pathAlexey Kardashevskiy1-1/+1
When trapped on WARN_ON(), report_bug() is expected to return BUG_TRAP_TYPE_WARN so the caller will increment NIP by 4 and continue. The __builtin_constant_p() path of the PPC's WARN_ON() calls (indirectly) __WARN_FLAGS() which has BUGFLAG_WARNING set, however the other branch does not which makes report_bug() report a bug rather than a warning. Fixes: f26dee15103f ("debug: Avoid setting BUGFLAG_WARNING twice") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-15USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacksAlan Stern3-19/+8
Using the syzkaller kernel fuzzer, Andrey Konovalov generated the following error in gadgetfs: > BUG: KASAN: use-after-free in __lock_acquire+0x3069/0x3690 > kernel/locking/lockdep.c:3246 > Read of size 8 at addr ffff88003a2bdaf8 by task kworker/3:1/903 > > CPU: 3 PID: 903 Comm: kworker/3:1 Not tainted 4.12.0-rc4+ #35 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 > Workqueue: usb_hub_wq hub_event > Call Trace: > __dump_stack lib/dump_stack.c:16 [inline] > dump_stack+0x292/0x395 lib/dump_stack.c:52 > print_address_description+0x78/0x280 mm/kasan/report.c:252 > kasan_report_error mm/kasan/report.c:351 [inline] > kasan_report+0x230/0x340 mm/kasan/report.c:408 > __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:429 > __lock_acquire+0x3069/0x3690 kernel/locking/lockdep.c:3246 > lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 > __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] > _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 > spin_lock include/linux/spinlock.h:299 [inline] > gadgetfs_suspend+0x89/0x130 drivers/usb/gadget/legacy/inode.c:1682 > set_link_state+0x88e/0xae0 drivers/usb/gadget/udc/dummy_hcd.c:455 > dummy_hub_control+0xd7e/0x1fb0 drivers/usb/gadget/udc/dummy_hcd.c:2074 > rh_call_control drivers/usb/core/hcd.c:689 [inline] > rh_urb_enqueue drivers/usb/core/hcd.c:846 [inline] > usb_hcd_submit_urb+0x92f/0x20b0 drivers/usb/core/hcd.c:1650 > usb_submit_urb+0x8b2/0x12c0 drivers/usb/core/urb.c:542 > usb_start_wait_urb+0x148/0x5b0 drivers/usb/core/message.c:56 > usb_internal_control_msg drivers/usb/core/message.c:100 [inline] > usb_control_msg+0x341/0x4d0 drivers/usb/core/message.c:151 > usb_clear_port_feature+0x74/0xa0 drivers/usb/core/hub.c:412 > hub_port_disable+0x123/0x510 drivers/usb/core/hub.c:4177 > hub_port_init+0x1ed/0x2940 drivers/usb/core/hub.c:4648 > hub_port_connect drivers/usb/core/hub.c:4826 [inline] > hub_port_connect_change drivers/usb/core/hub.c:4999 [inline] > port_event drivers/usb/core/hub.c:5105 [inline] > hub_event+0x1ae1/0x3d40 drivers/usb/core/hub.c:5185 > process_one_work+0xc08/0x1bd0 kernel/workqueue.c:2097 > process_scheduled_works kernel/workqueue.c:2157 [inline] > worker_thread+0xb2b/0x1860 kernel/workqueue.c:2233 > kthread+0x363/0x440 kernel/kthread.c:231 > ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:424 > > Allocated by task 9958: > save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 > save_stack+0x43/0xd0 mm/kasan/kasan.c:513 > set_track mm/kasan/kasan.c:525 [inline] > kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:617 > kmem_cache_alloc_trace+0x87/0x280 mm/slub.c:2745 > kmalloc include/linux/slab.h:492 [inline] > kzalloc include/linux/slab.h:665 [inline] > dev_new drivers/usb/gadget/legacy/inode.c:170 [inline] > gadgetfs_fill_super+0x24f/0x540 drivers/usb/gadget/legacy/inode.c:1993 > mount_single+0xf6/0x160 fs/super.c:1192 > gadgetfs_mount+0x31/0x40 drivers/usb/gadget/legacy/inode.c:2019 > mount_fs+0x9c/0x2d0 fs/super.c:1223 > vfs_kern_mount.part.25+0xcb/0x490 fs/namespace.c:976 > vfs_kern_mount fs/namespace.c:2509 [inline] > do_new_mount fs/namespace.c:2512 [inline] > do_mount+0x41b/0x2d90 fs/namespace.c:2834 > SYSC_mount fs/namespace.c:3050 [inline] > SyS_mount+0xb0/0x120 fs/namespace.c:3027 > entry_SYSCALL_64_fastpath+0x1f/0xbe > > Freed by task 9960: > save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 > save_stack+0x43/0xd0 mm/kasan/kasan.c:513 > set_track mm/kasan/kasan.c:525 [inline] > kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:590 > slab_free_hook mm/slub.c:1357 [inline] > slab_free_freelist_hook mm/slub.c:1379 [inline] > slab_free mm/slub.c:2961 [inline] > kfree+0xed/0x2b0 mm/slub.c:3882 > put_dev+0x124/0x160 drivers/usb/gadget/legacy/inode.c:163 > gadgetfs_kill_sb+0x33/0x60 drivers/usb/gadget/legacy/inode.c:2027 > deactivate_locked_super+0x8d/0xd0 fs/super.c:309 > deactivate_super+0x21e/0x310 fs/super.c:340 > cleanup_mnt+0xb7/0x150 fs/namespace.c:1112 > __cleanup_mnt+0x1b/0x20 fs/namespace.c:1119 > task_work_run+0x1a0/0x280 kernel/task_work.c:116 > exit_task_work include/linux/task_work.h:21 [inline] > do_exit+0x18a8/0x2820 kernel/exit.c:878 > do_group_exit+0x14e/0x420 kernel/exit.c:982 > get_signal+0x784/0x1780 kernel/signal.c:2318 > do_signal+0xd7/0x2130 arch/x86/kernel/signal.c:808 > exit_to_usermode_loop+0x1ac/0x240 arch/x86/entry/common.c:157 > prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] > syscall_return_slowpath+0x3ba/0x410 arch/x86/entry/common.c:263 > entry_SYSCALL_64_fastpath+0xbc/0xbe > > The buggy address belongs to the object at ffff88003a2bdae0 > which belongs to the cache kmalloc-1024 of size 1024 > The buggy address is located 24 bytes inside of > 1024-byte region [ffff88003a2bdae0, ffff88003a2bdee0) > The buggy address belongs to the page: > page:ffffea0000e8ae00 count:1 mapcount:0 mapping: (null) > index:0x0 compound_mapcount: 0 > flags: 0x100000000008100(slab|head) > raw: 0100000000008100 0000000000000000 0000000000000000 0000000100170017 > raw: ffffea0000ed3020 ffffea0000f5f820 ffff88003e80efc0 0000000000000000 > page dumped because: kasan: bad access detected > > Memory state around the buggy address: > ffff88003a2bd980: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff88003a2bda00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > >ffff88003a2bda80: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fb > ^ > ffff88003a2bdb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff88003a2bdb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ================================================================== What this means is that the gadgetfs_suspend() routine was trying to access dev->lock after it had been deallocated. The root cause is a race in the dummy_hcd driver; the dummy_udc_stop() routine can race with the rest of the driver because it contains no locking. And even when proper locking is added, it can still race with the set_link_state() function because that function incorrectly drops the private spinlock before invoking any gadget driver callbacks. The result of this race, as seen above, is that set_link_state() can invoke a callback in gadgetfs even after gadgetfs has been unbound from dummy_hcd's UDC and its private data structures have been deallocated. include/linux/usb/gadget.h documents that the ->reset, ->disconnect, ->suspend, and ->resume callbacks may be invoked in interrupt context. In general this is necessary, to prevent races with gadget driver removal. This patch fixes dummy_hcd to retain the spinlock across these calls, and it adds a spinlock acquisition to dummy_udc_stop() to prevent the race. The net2280 driver makes the same mistake of dropping the private spinlock for its ->disconnect and ->reset callback invocations. The patch fixes it too. Lastly, since gadgetfs_suspend() may be invoked in interrupt context, it cannot assume that interrupts are enabled when it runs. It must use spin_lock_irqsave() instead of spin_lock_irq(). The patch fixes that bug as well. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15drm: mxsfb_crtc: Reset the eLCDIF controllerFabio Estevam1-0/+42
According to the eLCDIF initialization steps listed in the MX6SX Reference Manual the eLCDIF block reset is mandatory. Without performing the eLCDIF reset the display shows garbage content when the kernel boots. In earlier tests this issue has not been observed because the bootloader was previously showing a splash screen and the bootloader display driver does properly implement the eLCDIF reset. Add the eLCDIF reset to the driver, so that it can operate correctly independently of the bootloader. Tested on a imx6sx-sdb board. Cc: <stable@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1494007301-14535-1-git-send-email-fabio.estevam@nxp.com
2017-06-15drm/mgag200: Fix to always set HiPri for G200e4 V2Mathieu Larouche1-1/+8
- Changed the HiPri value for G200e4 to always be 0. - Added Bandwith limitation to block resolution above 1920x1200x60Hz Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com> Acked-by: Dave Airlie <airlied@redhat.com> [seanpaul removed some trailing whitespace from the patch] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/ec0f8568d7ec41904dfe593c5deccf3f062d7bd8.1497450944.git.mathieu.larouche@matrox.com
2017-06-15powerpc/xive: Fix offset for store EOI MMIOsBenjamin Herrenschmidt3-8/+10
Architecturally we should apply a 0x400 offset for these. Not doing it will break future HW implementations. The offset of 0 is supposed to remain for "triggers" though not all sources support both trigger and store EOI, and in P9 specifically, some sources will treat 0 as a store EOI. But future chips will not. So this makes us use the properly architected offset which should work always. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-15drm/tegra: Correct idr_alloc() minimum idDmitry Osipenko1-1/+1
The client ID 0 is reserved by the host1x/cdma to mark the timeout timer work as already been scheduled and context ID is used as the clients one. This fixes spurious CDMA timeouts. Fixes: bdd2f9cd10eb ("drm/tegra: Don't leak kernel pointer to userspace") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/9c19a44219acd988e678cf9abe21363911184625.1497480754.git.digetx@gmail.com
2017-06-15drm/tegra: Fix lockup on a use of staging APIDmitry Osipenko1-16/+4
Commit bdd2f9cd10eb ("Don't leak kernel pointer to userspace") added a mutex around staging IOCTL's, some of those mutexes are taken twice. Fixes: bdd2f9cd10eb ("drm/tegra: Don't leak kernel pointer to userspace") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/7b70a506a9d2355ea6ff19a8c4f4d726b67719b3.1497480754.git.digetx@gmail.com
2017-06-15gpu: host1x: Fix error handlingChristophe JAILLET1-1/+1
If 'devm_reset_control_get' returns an error, then we erroneously return success because error code is taken from 'host->clk' instead of 'host->rst'. Fixes: b386c6b73ac6 ("gpu: host1x: Support module reset") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170410202922.17665-1-christophe.jaillet@wanadoo.fr
2017-06-15firmware: dmi_scan: Check DMI structure lengthJean Delvare1-7/+16
Before accessing DMI data to record it for later, we should ensure that the DMI structures are large enough to contain the data in question. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2017-06-15firmware: dmi: Fix permissions of product_familyJean Delvare1-2/+2
This is not sensitive information like serial numbers, we can allow all users to read it. Fix odd alignment while we're here. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: c61872c9833d ("firmware: dmi: Add DMI_PRODUCT_FAMILY identification string") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2017-06-15firmware: dmi_scan: Make dmi_walk and dmi_walk_early return real error codesAndy Lutomirski2-5/+6
Currently they return -1 on error, which will confuse callers if they try to interpret it as a normal negative error code. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-06-15firmware: dmi_scan: Look for SMBIOS 3 entry point firstJean Delvare1-1/+16
Since version 3.0.0 of the SMBIOS specification, there can be multiple entry points in memory, pointing to one or two DMI tables. If both a 32-bit ("_SM_") entry point and a 64-bit ("_SM3_") entry point are present, the specification requires that the latter points to a table which is a super-set of the table pointed to by the former. Therefore we should give preference to the 64-bit ("_SM3_") entry point. However, currently the code is picking the first valid entry point it finds. Per specification, we should look for a 64-bit ("_SM3_") entry point first, and if we can't find any, look for a 32-bit ("_SM_" or "_DMI_") entry point. Modify the code to do that. Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-06-15fs: don't forget to put old mntns in mntns_installAndrei Vagin1-0/+2
Fixes: 4f757f3cbf54 ("make sure that mntns_install() doesn't end up with referral for root") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-15Hang/soft lockup in d_invalidate with simultaneous callsAl Viro1-6/+4
It's not hard to trigger a bunch of d_invalidate() on the same dentry in parallel. They end up fighting each other - any dentry picked for removal by one will be skipped by the rest and we'll go for the next iteration through the entire subtree, even if everything is being skipped. Morevoer, we immediately go back to scanning the subtree. The only thing we really need is to dissolve all mounts in the subtree and as soon as we've nothing left to do, we can just unhash the dentry and bugger off. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-15ufs_truncate_blocks(): fix the case when size is in the last direct blockAl Viro1-9/+12
The logics when deciding whether we need to do anything with direct blocks is broken when new size is within the last direct block. It's better to find the path to the last byte _not_ to be removed and use that instead of the path to the beginning of the first block to be freed... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-15ufs: more deadlock prevention on tail unpackingAl Viro1-1/+1
->s_lock is not needed for ufs_change_blocknr() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-15ufs: avoid grabbing ->truncate_mutex if possibleAl Viro2-10/+26
tail unpacking is done in a wrong place; the deadlocks galore is best dealt with by doing that in ->write_iter() (and switching to iomap, while we are at it), but that's rather painful to backport. The trouble comes from grabbing pages that cover the beginning of tail from inside of ufs_new_fragments(); ongoing pageout of any of those is going to deadlock on ->truncate_mutex with process that got around to extending the tail holding that and waiting for page to get unlocked, while ->writepage() on that page is waiting on ->truncate_mutex. The thing is, we don't need ->truncate_mutex when the fragment we are trying to map is within the tail - the damn thing is allocated (tail can't contain holes). Let's do a plain lookup and if the fragment is present, we can just pretend that we'd won the race in almost all cases. The only exception is a fragment between the end of tail and the end of block containing tail. Protect ->i_lastfrag with ->meta_lock - read_seqlock_excl() is sufficient. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14i40e: Fix a sleep-in-atomic bugJia-Ju Bai1-0/+2
The driver may sleep under a spin lock, and the function call path is: i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh) i40e_vsi_remove_pvid i40e_vlan_stripping_disable i40e_aq_update_vsi_params i40e_asq_send_command mutex_lock --> may sleep To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and the lock is acquired again after this function. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14ufs_get_locked_page(): make sure we have buffer_headsAl Viro1-9/+8
callers rely upon that, but find_lock_page() racing with attempt of page eviction by memory pressure might have left us with * try_to_free_buffers() successfully done * __remove_mapping() failed, leaving the page in our mapping * find_lock_page() returning an uptodate page with no buffer_heads attached. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14ufs: fix s_size/s_dsize usersAl Viro4-24/+19
For UFS2 we need 64bit variants; we even store them in uspi, but use 32bit ones instead. One wrinkle is in handling of reserved space - recalculating it every time had been stupid all along, but now it would become really ugly. Just calculate it once... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14ufs: fix reserved blocks checkAl Viro1-4/+6
a) honour ->s_minfree; don't just go with default (5) b) don't bother with capability checks until we know we'll need them Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14ufs: make ufs_freespace() return signedAl Viro1-2/+2
as it is, checking that its return value is <= 0 is useless and that's how it's being used. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14net: don't global ICMP rate limit packets originating from loopbackJesper Dangaard Brouer2-3/+7
Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by: Florian Weimer <fweimer@redhat.com> Reported-by: "H.J. Lu" <hjl.tools@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14block: Fix a blk_exit_rl() regressionBart Van Assche2-12/+24
Avoid that the following complaint is reported: BUG: sleeping function called from invalid context at kernel/workqueue.c:2790 in_atomic(): 1, irqs_disabled(): 0, pid: 41, name: rcuop/3 1 lock held by rcuop/3/41: #0: (rcu_callback){......}, at: [<ffffffff8111f9a2>] rcu_nocb_kthread+0x282/0x500 Call Trace: dump_stack+0x86/0xcf ___might_sleep+0x174/0x260 __might_sleep+0x4a/0x80 flush_work+0x7e/0x2e0 __cancel_work_timer+0x143/0x1c0 cancel_work_sync+0x10/0x20 blk_throtl_exit+0x25/0x60 blkcg_exit_queue+0x35/0x40 blk_release_queue+0x42/0x130 kobject_put+0xa9/0x190 This happens since we invoke callbacks that need to block from the queue release handler. Fix this by pushing the final release to a workqueue. Reported-by: Ross Zwisler <zwisler@gmail.com> Fixes: commit b425e5049258 ("block: Avoid that blk_exit_rl() triggers a use-after-free") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Updated changelog Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-14rdma/cxgb4: Fix memory leaks during module exitRaju Rangoju1-3/+7
Fix memory leaks of iw_cxgb4 module in the exit path Signed-off-by: Raju Rangoju <rajur@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14net/act_pedit: fix an error codeDan Carpenter1-1/+3
I'm reviewing static checker warnings where we do ERR_PTR(0), which is the same as NULL. I'm pretty sure we intended to return ERR_PTR(-EINVAL) here. Sometimes these bugs lead to a NULL dereference but I don't immediately see that problem here. Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14ufs: fix logics in "ufs: make fsck -f happy"Al Viro1-13/+28
Storing stats _only_ at new locations is wrong for UFS1; old locations should always be kept updated. The check for "has been converted to use of new locations" is also wrong - it should be "->fs_maxbsize is equal to ->fs_bsize". Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14IB/ipoib: Fix memory leak in create child syscallFeras Daoud1-3/+3
The flow of creating a new child goes through ipoib_vlan_add which allocates a new interface and checks the rtnl_lock. If the lock is taken, restart_syscall will be called to restart the system call again. In this case we are not releasing the already allocated interface, causing a leak. Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Fix access to un-initialized napi structAlex Vesker1-1/+0
There is no need to re-enable napi since we set the initialized flag before calling ipoib_ib_dev_stop which will disable napi, disabling napi twice is harmless in case it was already disabled. One more reason for this fix is that when using IPoIB new device driver napi is not added to priv, this can lead to kernel panic when rn_ops ndo_open fails. [ 289.755840] invalid opcode: 0000 [#1] SMP [ 289.757111] task: ffff880036964440 ti: ffff880178ee8000 task.ti: ffff880178ee8000 [ 289.757111] RIP: 0010:[<ffffffffa05368d6>] [<ffffffffa05368d6>] napi_enable.part.24+0x4/0x6 [ib_ipoib] [ 289.757111] RSP: 0018:ffff880178eeb6d8 EFLAGS: 00010246 [ 289.757111] RAX: 0000000000000000 RBX: ffff880177a80010 RCX: 000000007fffffff [ 289.757111] RDX: ffffffff81d5f118 RSI: 0000000000000000 RDI: ffff880177a80010 [ 289.757111] RBP: ffff880178eeb6d8 R08: 0000000000000082 R09: 0000000000000283 [ 289.757111] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175a00000 [ 289.757111] R13: ffff880177a80080 R14: 0000000000000000 R15: 0000000000000001 [ 289.757111] FS: 00007fe2ee346880(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 289.757111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 289.757111] CR2: 00007fffca979020 CR3: 00000001792e4000 CR4: 00000000000006f0 [ 289.757111] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 289.757111] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 289.757111] Stack: [ 289.796027] ffff880178eeb6f0 ffffffffa05251f5 ffff880177a80000 ffff880178eeb718 [ 289.796027] ffffffffa0528505 ffff880175a00000 ffff880177a80000 0000000000000000 [ 289.796027] ffff880178eeb748 ffffffffa051f0ab ffff880175a00000 ffffffffa0537d60 [ 289.796027] Call Trace: [ 289.796027] [<ffffffffa05251f5>] napi_enable+0x25/0x30 [ib_ipoib] [ 289.796027] [<ffffffffa0528505>] ipoib_ib_dev_open+0x175/0x190 [ib_ipoib] [ 289.796027] [<ffffffffa051f0ab>] ipoib_open+0x4b/0x160 [ib_ipoib] [ 289.796027] [<ffffffff814fe33f>] _dev_open+0xbf/0x130 [ 289.796027] [<ffffffff814fe62d>] __dev_change_flags+0x9d/0x170 [ 289.796027] [<ffffffff814fe729>] dev_change_flags+0x29/0x60 [ 289.796027] [<ffffffff8150caf7>] do_setlink+0x397/0xa40 Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Delete napi in device uninit defaultAlex Vesker1-0/+3
This patch mekas init_default and uninit_default symmetric with a call to delete napi. Additionally, the uninit_default gained delete napi call in case of init_default fails. Fixes: 515ed4f3aab4 ('IB/IPoIB: Separate control and data related initializations') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Limit call to free rdma_netdev for capable devicesAlex Vesker2-3/+8
Limit calls to free_rdma_netdev() for capable devices only. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Fix memory leaks for child interfaces privAlex Vesker2-2/+10
There is a need to free priv explicitly and not just to release the device, child priv is freed explicitly on remove flow and this patch also includes priv free on error flow in P_key creation and also in add_port. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14net: update undefined ->ndo_change_mtu() commentMagnus Damm1-2/+1
Update ->ndo_change_mtu() callback comment to remove text about returning error in case of undefined callback. This change makes the comment match the existing code behavior. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14net_sched: move tcf_lock down after gen_replace_estimator()WANG Cong1-5/+3
Laura reported a sleep-in-atomic kernel warning inside tcf_act_police_init() which calls gen_replace_estimator() with spinlock protection. It is not necessary in this case, we already have RTNL lock here so it is enough to protect concurrent writers. For the reader, i.e. tcf_act_police(), it needs to make decision based on this rate estimator, in the worst case we drop more/less packets than necessary while changing the rate in parallel, it is still acceptable. Reported-by: Laura Abbott <labbott@redhat.com> Reported-by: Nick Huber <nicholashuber@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14ceph: unify inode i_ctime updateYan, Zheng2-3/+3
Current __ceph_setattr() can set inode's i_ctime to current_time(), req->r_stamp or attr->ia_ctime. These time stamps may have minor differences. It may cause potential problem. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-14ceph: use current_kernel_time() to get request time stampYan, Zheng1-3/+1
ceph uses ktime_get_real_ts() to get request time stamp. In most other cases, current_kernel_time() is used to get time stamp for filesystem operations (called by current_time()). There is granularity difference between ktime_get_real_ts() and current_kernel_time(). The later one can be up to one jiffy behind the former one. This can causes inode's ctime to go back. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-14ceph: check i_nlink while converting a file handle to dentryLuis Henriques1-0/+4
Converting a file handle to a dentry can be done call after the inode unlink. This means that __fh_to_dentry() requires an extra check to verify the number of links is not 0. The issue can be easily reproduced using xfstest generic/426, which does something like: name_to_handle_at(&fh) echo 3 > /proc/sys/vm/drop_caches unlink() open_by_handle_at(&fh) The call to open_by_handle_at() should fail, as the file doesn't exist anymore. Link: http://tracker.ceph.com/issues/19958 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-14rxe: Fix a sleep-in-atomic bug in post_one_sendJia-Ju Bai1-7/+2
The driver may sleep under a spin lock, and the function call path is: post_one_send (acquire the lock by spin_lock_irqsave) init_send_wqe copy_from_user --> may sleep There is no flow that makes "qp->is_user" true, and copy_from_user may cause bug when a non-user pointer is used. So the lines of copy_from_user and check of "qp->is_user" are removed. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/qedr: Add 64KB PAGE_SIZE support to user-space queuesRam Amrani2-28/+41
Add 64KB PAGE_SIZE support to user-space CQ, SQ and RQ queues. De-facto it means that code was added to translate 64KB pages to smaller 4KB pages that the FW can handle. Otherwise, the FW would wrap (or jump to the next page) when reaching 4KB while the user space library will continue on the same large page. Note that MR code remains as is since the FW supports larger pages for MRs. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/qedr: Initialize byte_len in WC of READ and SEND commandsMichal Kalderon1-0/+4
Initialize byte_len in work completion of RDMA_READ and RDMA_SEND. Exposed by uDAPL application. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Remove FMR supportSelvin Xavier3-106/+2
Some issues observed with FMR implementation while running stress traffic. So removing the FMR verbs support for now. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Fix RQE posting logicDevesh Sharma3-1/+20
This patch adds code to ring RQ Doorbell aggressively so that the adapter can DMA RQ buffers sooner, instead of DMA all WQEs in the post_recv WR list together at the end of the post_recv verb. Also use spinlock to serialize RQ posting Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPsSomnath Kotur4-0/+24
HW stalls out after 0x800000 WQEs are posted for UD QPs. To workaround this problem, driver will send a modify_qp cmd to the HW at around the halfway mark(0x400000) so that FW can accordingly modify the QP context in the HW to prevent this stall. This workaround needs to be done for UD, QP1 and Raw Ethertype packets. Added a counter to keep track of WQEs posted during post_send. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_listSelvin Xavier1-2/+6
If the host buffers are freed before destroying MR in HW, HW could try accessing these buffers. This could cause a host crash. Fixing the code to avoid this condition. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.