aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-12-02SUNRPC: Add a helper to return the transport identifier given a netidTrond Myklebust2-4/+22
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02SUNRPC: Close a race with transport setup and module putTrond Myklebust1-11/+33
After we've looked up the transport module, we need to ensure it can't go away until we've finished running the transport setup code. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02SUNRPC: xprt_load_transport() needs to support the netid "rdma6"Trond Myklebust5-16/+56
According to RFC5666, the correct netid for an IPv6 addressed RDMA transport is "rdma6", which we've supported as a mount option since Linux-4.7. The problem is when we try to load the module "xprtrdma6", that will fail, since there is no modulealias of that name. Fixes: 181342c5ebe8 ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02NFS: Do uncached readdir when we're seeking a cookie in an empty page cacheTrond Myklebust1-0/+17
If the directory is changing, causing the page cache to get invalidated while we are listing the contents, then the NFS client is currently forced to read in the entire directory contents from scratch, because it needs to perform a linear search for the readdir cookie. While this is not an issue for small directories, it does not scale to directories with millions of entries. In order to be able to deal with large directories that are changing, add a heuristic to ensure that if the page cache is empty, and we are searching for a cookie that is not the zero cookie, we just default to performing uncached readdir. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Reduce number of RPC calls when doing uncached readdirTrond Myklebust1-36/+69
If we're doing uncached readdir, allocate multiple pages in order to try to avoid duplicate RPC calls for the same getdents() call. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Optimisations for monotonically increasing readdir cookiesTrond Myklebust1-1/+22
If the server is handing out monotonically increasing readdir cookie values, then we can optimise away searches through pages that contain cookies that lie outside our search range. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Improve handling of directory verifiersTrond Myklebust3-20/+30
If the server insists on using the readdir verifiers in order to allow cookies to expire, then we should ensure that we cache the verifier with the cookie, so that we can return an error if the application tries to use the expired cookie. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Handle NFS4ERR_NOT_SAME and NFSERR_BADCOOKIE from readdir callsTrond Myklebust2-8/+18
If the server returns NFS4ERR_NOT_SAME or tells us that the cookie is bad in response to a READDIR call, then we should empty the page cache so that we can fill it from scratch again. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Allow the NFS generic code to pass in a verifier to readdirTrond Myklebust5-53/+76
If we're ever going to allow support for servers that use the readdir verifier, then that use needs to be managed by the middle layers as those need to be able to reject cookies from other verifiers. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Cleanup to remove nfs_readdir_descriptor_t typedefTrond Myklebust1-17/+13
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Reduce readdir stack usageTrond Myklebust1-25/+33
The descriptor and the struct nfs_entry are both large structures, so don't allocate them from the stack. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: nfs_do_filldir() does not return a valueTrond Myklebust1-14/+7
Clean up nfs_do_filldir(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: More readdir cleanupsTrond Myklebust2-15/+11
Remove the redundant caching of the credential in struct nfs_open_dir_context. Pass the buffer size as an argument to nfs_readdir_xdr_filler(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Support larger readdir buffersTrond Myklebust3-22/+21
Support readdir buffers of up to 1MB in size so that we can read large directories using few RPC calls. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Simplify struct nfs_cache_array_entryTrond Myklebust1-21/+25
We don't need to store a hash, so replace struct qstr with a simple const char pointer and length. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Replace kmap() with kmap_atomic() in nfs_readdir_search_array()Trond Myklebust1-2/+2
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Remove unnecessary kmap in nfs_readdir_xdr_to_array()Trond Myklebust1-7/+3
The kmapped pointer is only used once per loop to check if we need to exit. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Don't discard readdir resultsTrond Myklebust1-4/+42
If a readdir call returns more data than we can fit into one page cache page, then allocate a new one for that data rather than discarding the data. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Clean up directory array handlingTrond Myklebust1-61/+77
Refactor to use pagecache_get_page() so that we can fill the page in multiple stages. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Clean up nfs_readdir_page_filler()Trond Myklebust1-21/+18
Clean up handling of the case where there are no entries in the readdir reply. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Clean up readdir struct nfs_cache_arrayTrond Myklebust1-17/+49
Since the 'eof_index' is only ever used as a flag, make it so. Also add a flag to detect if the page has been completely filled. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFS: Ensure contents of struct nfs_open_dir_context are consistentTrond Myklebust1-29/+43
Ensure that the contents of struct nfs_open_dir_context are consistent by setting them under the file->f_lock from a private copy (that is known to be consistent). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Dave Wysochanski <dwysocha@redhat.com>
2020-12-02NFSv4.2: condition READDIR's mask for security label based on LSM stateOlga Kornievskaia1-2/+8
Currently, the client will always ask for security_labels if the server returns that it supports that feature regardless of any LSM modules (such as Selinux) enforcing security policy. This adds performance penalty to the READDIR operation. Client adjusts superblock's support of the security_label based on the server's support but also current client's configuration of the LSM modules. Thus, prior to using the default bitmask in READDIR, this patch checks the server's capabilities and then instructs READDIR to remove FATTR4_WORD2_SECURITY_LABEL from the bitmask. v5: fixing silly mistakes of the rushed v4 v4: simplifying logic v3: changing label's initialization per Ondrej's comment v2: dropping selinux hook and using the sb cap. Suggested-by: Ondrej Mosnacek <omosnace@redhat.com> Suggested-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Fixes: 2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02SUNRPC: rpc_wake_up() should wake up tasks in the correct orderTrond Myklebust1-30/+35
Currently, we wake up the tasks by priority queue ordering, which means that we ignore the batching that is supposed to help with QoS issues. Fixes: c049f8ea9a0d ("SUNRPC: Remove the bh-safe lock requirement on the rpc_wait_queue->lock") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02NFSv4: Observe the NFS_MOUNT_SOFTREVAL flag in _nfs4_proc_lookuppTrond Myklebust1-1/+5
We need to respect the NFS_MOUNT_SOFTREVAL flag in _nfs4_proc_lookupp, by timing out if the server is unavailable. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02NFSv3: Add emulation of the lookupp() operationTrond Myklebust1-0/+15
In order to use the open_by_filehandle() operations on NFSv3, we need to be able to emulate lookupp() so that nfs_get_parent() can be used to convert disconnected dentries into connected ones. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02NFSv3: Refactor nfs3_proc_lookup() to split out the dentryTrond Myklebust1-11/+22
We want to reuse the lookup code in NFSv3 in order to emulate the NFSv4 lookupp operation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02NFSv4.2: Fix 5 seconds delay when doing inter server copyDai Ngo1-1/+1
Since commit b4868b44c5628 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5 seconds delay regardless of the size of the copy. The delay is from nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential fails because the seqid in both nfs4_state and nfs4_stateid are 0. Fix __nfs42_ssc_open to delay setting of NFS_OPEN_STATE in nfs4_state, until after the call to update_open_stateid, to indicate this is the 1st open. This fix is part of a 2 patches, the other patch is the fix in the source server to return the stateid for COPY_NOTIFY request with seqid 1 instead of 0. Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-12-02NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operationChuck Lever2-9/+13
By switching to an XFS-backed export, I am able to reproduce the ibcomp worker crash on my client with xfstests generic/013. For the failing LISTXATTRS operation, xdr_inline_pages() is called with page_len=12 and buflen=128. - When ->send_request() is called, rpcrdma_marshal_req() does not set up a Reply chunk because buflen is smaller than the inline threshold. Thus rpcrdma_convert_iovs() does not get invoked at all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked on the receive buffer. - During reply processing, rpcrdma_inline_fixup() tries to copy received data into rq_rcv_buf->pages because page_len is positive. But there are no receive pages because rpcrdma_marshal_req() never allocated them. The result is that the ibcomp worker faults and dies. Sometimes that causes a visible crash, and sometimes it results in a transport hang without other symptoms. RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and should eventually be fixed or replaced. However, my preference is that upper-layer operations should explicitly allocate their receive buffers (using GFP_KERNEL) when possible, rather than relying on XDRBUF_SPARSE_PAGES. Reported-by: Olga kornievskaia <kolga@netapp.com> Suggested-by: Olga kornievskaia <kolga@netapp.com> Fixes: c10a75145feb ("NFSv4.2: add the extended attribute proc functions.") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Olga kornievskaia <kolga@netapp.com> Reviewed-by: Frank van der Linden <fllinden@amazon.com> Tested-by: Olga kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-12-02SUNRPC: Remove XDRBUF_SPARSE_PAGES flag in gss_proxy upcallChuck Lever2-6/+10
There's no need to defer allocation of pages for the receive buffer. - This upcall is quite infrequent - gssp_alloc_receive_pages() can allocate the pages with GFP_KERNEL, unlike the transport - gssp_alloc_receive_pages() knows exactly how many pages are needed Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-30pNFS/flexfiles: Fix array overflow when flexfiles mirroring is enabledTrond Myklebust3-15/+52
If the flexfiles mirroring is enabled, then the read code expects to be able to set pgio->pg_mirror_idx to point to the data server that is being used for this particular read. However it does not change the pg_mirror_count because we only need to send a single read. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-29Linux 5.10-rc6Linus Torvalds1-1/+1
2020-11-27sock: set sk_err to ee_errno on dequeue from errqWillem de Bruijn1-1/+1
When setting sk_err, set it to ee_errno, not ee_origin. Commit f5f99309fa74 ("sock: do not set sk_err in sock_dequeue_err_skb") disabled updating sk_err on errq dequeue, which is correct for most error types (origins): - sk->sk_err = err; Commit 38b257938ac6 ("sock: reset sk_err when the error queue is empty") reenabled the behavior for IMCP origins, which do require it: + if (icmp_next) + sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin; But read from ee_errno. Fixes: 38b257938ac6 ("sock: reset sk_err when the error queue is empty") Reported-by: Ayush Ranjan <ayushranjan@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27mptcp: fix NULL ptr dereference on bad MPJPaolo Abeni1-3/+2
If an msk listener receives an MPJ carrying an invalid token, it will zero the request socket msk entry. That should later cause fallback and subflow reset - as per RFC - at subflow_syn_recv_sock() time due to failing hmac validation. Since commit 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()"), we unconditionally dereference - in mptcp_can_accept_new_subflow - the subflow request msk before performing hmac validation. In the above scenario we hit a NULL ptr dereference. Address the issue doing the hmac validation earlier. Fixes: 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()") Tested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net: openvswitch: fix TTL decrement action netlink message formatEelco Chaudron3-23/+60
Currently, the openvswitch module is not accepting the correctly formated netlink message for the TTL decrement action. For both setting and getting the dec_ttl action, the actions should be nested in the OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi. When the original patch was sent, it was tested with a private OVS userspace implementation. This implementation was unfortunately not upstreamed and reviewed, hence an erroneous version of this patch was sent out. Leaving the patch as-is would cause problems as the kernel module could interpret additional attributes as actions and vice-versa, due to the actions not being encapsulated/nested within the actual attribute, but being concatinated after it. Fixes: 744676e77720 ("openvswitch: add TTL decrement action") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27perf probe: Change function definition check due to broken DWARFMasami Hiramatsu2-4/+19
Since some gcc generates a broken DWARF which lacks DW_AT_declaration attribute from the subprogram DIE of function prototype. (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97060) So, in addition to the DW_AT_declaration check, we also check the subprogram DIE has DW_AT_inline or actual entry pc. Committer testing: # cat /etc/fedora-release Fedora release 33 (Thirty Three) # Before: # perf test vfs_getname 78: Use vfs_getname probe to get syscall args filenames : FAILED! 79: Check open filename arg using perf trace + vfs_getname : FAILED! 81: Add vfs_getname probe to get syscall args filenames : FAILED! # After: # perf test vfs_getname 78: Use vfs_getname probe to get syscall args filenames : Ok 79: Check open filename arg using perf trace + vfs_getname : Ok 81: Add vfs_getname probe to get syscall args filenames : Ok # Reported-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Link: http://lore.kernel.org/lkml/160645613571.2824037.7441351537890235895.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf probe: Fix to die_entrypc() returns error correctlyMasami Hiramatsu1-0/+8
Fix die_entrypc() to return error correctly if the DIE has no DW_AT_ranges attribute. Since dwarf_ranges() will treat the case as an empty ranges and return 0, we have to check it by ourselves. Fixes: 91e2f539eeda ("perf probe: Fix to show function entry line as probe-able") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lore.kernel.org/lkml/160645612634.2824037.5284932731175079426.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf stat: Use proper cpu for shadow statsNamhyung Kim1-4/+1
Currently perf stat shows some metrics (like IPC) for defined events. But when no aggregation mode is used (-A option), it shows incorrect values since it used a value from a different cpu. Before: $ perf stat -aA -e cycles,instructions sleep 1 Performance counter stats for 'system wide': CPU0 116,057,380 cycles CPU1 86,084,722 cycles CPU2 99,423,125 cycles CPU3 98,272,994 cycles CPU0 53,369,217 instructions # 0.46 insn per cycle CPU1 33,378,058 instructions # 0.29 insn per cycle CPU2 58,150,086 instructions # 0.50 insn per cycle CPU3 40,029,703 instructions # 0.34 insn per cycle 1.001816971 seconds time elapsed So the IPC for CPU1 should be 0.38 (= 33,378,058 / 86,084,722) but it was 0.29 (= 33,378,058 / 116,057,380) and so on. After: $ perf stat -aA -e cycles,instructions sleep 1 Performance counter stats for 'system wide': CPU0 109,621,384 cycles CPU1 159,026,454 cycles CPU2 99,460,366 cycles CPU3 124,144,142 cycles CPU0 44,396,706 instructions # 0.41 insn per cycle CPU1 120,195,425 instructions # 0.76 insn per cycle CPU2 44,763,978 instructions # 0.45 insn per cycle CPU3 69,049,079 instructions # 0.56 insn per cycle 1.001910444 seconds time elapsed Fixes: 44d49a600259 ("perf stat: Support metrics in --per-core/socket mode") Reported-by: Sam Xi <xyzsam@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201127041404.390276-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf record: Synthesize cgroup events only if neededNamhyung Kim1-0/+3
It didn't check the tool->cgroup_events bit which is set when the --all-cgroups option is given. Without it, samples will not have cgroup info so no reason to synthesize. We can check the PERF_RECORD_CGROUP records after running perf record *WITHOUT* the --all-cgroups option: Before: $ perf report -D | grep CGROUP 0 0 0x8430 [0x38]: PERF_RECORD_CGROUP cgroup: 1 / CGROUP events: 1 CGROUP events: 0 CGROUP events: 0 After: $ perf report -D | grep CGROUP CGROUP events: 0 CGROUP events: 0 CGROUP events: 0 Committer testing: Before: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.208 MB perf.data (10003 samples) ] # perf report -D | grep "CGROUP events" CGROUP events: 146 CGROUP events: 0 CGROUP events: 0 # After: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.208 MB perf.data (10448 samples) ] # perf report -D | grep "CGROUP events" CGROUP events: 0 CGROUP events: 0 CGROUP events: 0 # With all-cgroups: # perf record --all-cgroups -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.374 MB perf.data (11526 samples) ] # perf report -D | grep "CGROUP events" CGROUP events: 146 CGROUP events: 0 CGROUP events: 0 # Fixes: 8fb4b67939e16 ("perf record: Add --all-cgroups option") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201127054356.405481-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf diff: Fix error return value in __cmd_diff()Zhen Lei1-1/+3
An appropriate return value should be set on the failed path. Fixes: 2a09a84c720b436a ("perf diff: Support hot streams comparison") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201124103652.438-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf tools: Update copy of libbpf's hashmap.cArnaldo Carvalho de Melo1-6/+9
To pick the changes in: 7a078d2d18801bba ("libbpf, hashmap: Fix undefined behavior in hash_bits") That don't entail any changes in tools/perf. This addresses this perf build warning: Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h Not a kernel ABI, its just that this uses the mechanism in place for checking kernel ABI files drift. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27x86/mce: Do not overwrite no_way_out if mce_end() failsGabriele Paoloni1-2/+4
Currently, if mce_end() fails, no_way_out - the variable denoting whether the machine can recover from this MCE - is determined by whether the worst severity that was found across the MCA banks associated with the current CPU, is of panic severity. However, at this point no_way_out could have been already set by mca_start() after looking at all severities of all CPUs that entered the MCE handler. If mce_end() fails, check first if no_way_out is already set and, if so, stick to it, otherwise use the local worst value. [ bp: Massage. ] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201127161819.3106432-2-gabriele.paoloni@intel.com
2020-11-27kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PTVitaly Kuznetsov1-1/+1
Commit 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") caused the following WARNING on an Intel Ice Lake CPU: get_mmio_spte: detect reserved bits on spte, addr 0xb80a0, dump hierarchy: ------ spte 0xb80a0 level 5. ------ spte 0xfcd210107 level 4. ------ spte 0x1004c40107 level 3. ------ spte 0x1004c41107 level 2. ------ spte 0x1db00000000b83b6 level 1. WARNING: CPU: 109 PID: 10254 at arch/x86/kvm/mmu/mmu.c:3569 kvm_mmu_page_fault.cold.150+0x54/0x22f [kvm] ... Call Trace: ? kvm_io_bus_get_first_dev+0x55/0x110 [kvm] vcpu_enter_guest+0xaa1/0x16a0 [kvm] ? vmx_get_cs_db_l_bits+0x17/0x30 [kvm_intel] ? skip_emulated_instruction+0xaa/0x150 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xca/0x520 [kvm] The guest triggering this crashes. Note, this happens with the traditional MMU and EPT enabled, not with the newly introduced TDP MMU. Turns out, there was a subtle change in the above mentioned commit. Previously, walk_shadow_page_get_mmio_spte() was setting 'root' to 'iterator.level' which is returned by shadow_walk_init() and this equals to 'vcpu->arch.mmu->shadow_root_level'. Now, get_mmio_spte() sets it to 'int root = vcpu->arch.mmu->root_level'. The difference between 'root_level' and 'shadow_root_level' on CPUs supporting 5-level page tables is that in some case we don't want to use 5-level, in particular when 'cpuid_maxphyaddr(vcpu) <= 48' kvm_mmu_get_tdp_level() returns '4'. In case upper layer is not used, the corresponding SPTE will fail '__is_rsvd_bits_set()' check. Revert to using 'shadow_root_level'. Fixes: 95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20201126110206.2118959-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-27KVM: x86: Fix split-irqchip vs interrupt injection window requestPaolo Bonzini3-9/+12
kvm_cpu_accept_dm_intr and kvm_vcpu_ready_for_interrupt_injection are a hodge-podge of conditions, hacked together to get something that more or less works. But what is actually needed is much simpler; in both cases the fundamental question is, do we have a place to stash an interrupt if userspace does KVM_INTERRUPT? In userspace irqchip mode, that is !vcpu->arch.interrupt.injected. Currently kvm_event_needs_reinjection(vcpu) covers it, but it is unnecessarily restrictive. In split irqchip mode it's a bit more complicated, we need to check kvm_apic_accept_pic_intr(vcpu) (the IRQ window exit is basically an INTACK cycle and thus requires ExtINTs not to be masked) as well as !pending_userspace_extint(vcpu). However, there is no need to check kvm_event_needs_reinjection(vcpu), since split irqchip keeps pending ExtINT state separate from event injection state, and checking kvm_cpu_has_interrupt(vcpu) is wrong too since ExtINT has higher priority than APIC interrupts. In fact the latter fixes a bug: when userspace requests an IRQ window vmexit, an interrupt in the local APIC can cause kvm_cpu_has_interrupt() to be true and thus kvm_vcpu_ready_for_interrupt_injection() to return false. When this happens, vcpu_run does not exit to userspace but the interrupt window vmexits keep occurring. The VM loops without any hope of making progress. Once we try to fix these with something like return kvm_arch_interrupt_allowed(vcpu) && - !kvm_cpu_has_interrupt(vcpu) && - !kvm_event_needs_reinjection(vcpu) && - kvm_cpu_accept_dm_intr(vcpu); + (!lapic_in_kernel(vcpu) + ? !vcpu->arch.interrupt.injected + : (kvm_apic_accept_pic_intr(vcpu) + && !pending_userspace_extint(v))); we realize two things. First, thanks to the previous patch the complex conditional can reuse !kvm_cpu_has_extint(vcpu). Second, the interrupt window request in vcpu_enter_guest() bool req_int_win = dm_request_for_irq_injection(vcpu) && kvm_cpu_accept_dm_intr(vcpu); should be kept in sync with kvm_vcpu_ready_for_interrupt_injection(): it is unnecessary to ask the processor for an interrupt window if we would not be able to return to userspace. Therefore, kvm_cpu_accept_dm_intr(vcpu) is basically !kvm_cpu_has_extint(vcpu) ANDed with the existing check for masked ExtINT. It all makes sense: - we can accept an interrupt from userspace if there is a place to stash it (and, for irqchip split, ExtINTs are not masked). Interrupts from userspace _can_ be accepted even if right now EFLAGS.IF=0. - in order to tell userspace we will inject its interrupt ("IRQ window open" i.e. kvm_vcpu_ready_for_interrupt_injection), both KVM and the vCPU need to be ready to accept the interrupt. ... and this is what the patch implements. Reported-by: David Woodhouse <dwmw@amazon.co.uk> Analyzed-by: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Tested-by: David Woodhouse <dwmw@amazon.co.uk>
2020-11-27KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extintPaolo Bonzini2-51/+34
Centralize handling of interrupts from the userspace APIC in kvm_cpu_has_extint and kvm_cpu_get_extint, since userspace APIC interrupts are handled more or less the same as ExtINTs are with split irqchip. This removes duplicated code from kvm_cpu_has_injectable_intr and kvm_cpu_has_interrupt, and makes the code more similar between kvm_cpu_has_{extint,interrupt} on one side and kvm_cpu_get_{extint,interrupt} on the other. Cc: stable@vger.kernel.org Reviewed-by: Filippo Sironi <sironi@amazon.de> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Tested-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-27usb: typec: stusb160x: fix power-opmode property with typec-power-opmodeAmelie Delaunay1-1/+1
Device tree property is named typec-power-opmode, not power-opmode. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201127131735.28280-1-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-27printk: finalize records with trailing newlinesJohn Ogness1-2/+2
Any record with a trailing newline (LOG_NEWLINE flag) cannot be continued because the newline has been stripped and will not be visible if the message is appended. This was already handled correctly when committing in log_output() but was not handled correctly when committing in log_store(). Fixes: f5f022e53b87 ("printk: reimplement log_cont using record extension") Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-11-27can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity checkOliver Hartkopp1-2/+5
To detect potential bugs in CAN protocol implementations (double removal of receiver entries) a WARN() statement has been used if no matching list item was found for removal. The fault injection issued by syzkaller was able to create a situation where the closing of a socket runs simultaneously to the notifier call chain for removing the CAN network device in use. This case is very unlikely in real life but it doesn't break anything. Therefore we just replace the WARN() statement with pr_warn() to preserve the notification for the CAN protocol development. Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0Pankaj Sharma1-0/+2
Add support for mcan bit timing and control mode according to bosch mcan IP version 3.3.0. The mcan version read from the Core Release field of CREL register would be 33. Accordingly the properties are to be set for mcan v3.3.0 Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@samsung.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27can: m_can: fix nominal bitiming tseg2 min for version >= 3.1Marc Kleine-Budde1-1/+1
At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid register values for "Nominal Time segment after sample point (NTSEG2)" are from 1 to 127. As the hardware uses a value of one more than the programmed value, mean tseg2_min is 2. This patch fixes the tseg2_min value accordingly. Cc: Dan Murphy <dmurphy@ti.com> Cc: Mario Huettel <mario.huettel@gmx.net> Acked-by: Sriram Dash <sriram.dash@samsung.com> Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de Fixes: b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.