| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the system-wide mode, LBR callstacks are shorter in comparison to
the per-process mode.
LBR MSRs are reset during a context switch in the system-wide mode. For
the LBR call stack, the LBRs should be always saved/restored during a
context switch.
Use the space in task_struct to save/restore the LBR call stack data.
For a system-wide event, it's unnecessagy to update the
lbr_callstack_users for each threads. Add a variable in x86_pmu to
indicate whether the system-wide event is active.
Fixes: 76cb2c617f12 ("perf/x86/intel: Save/restore LBR stack during context switch")
Reported-by: Andi Kleen <ak@linux.intel.com>
Reported-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Debugged-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-5-kan.liang@linux.intel.com
|
|
To save/restore LBR call stack data in system-wide mode, the task_struct
information is required.
Extend the parameters of sched_task() to supply task_struct information.
When schedule in, the LBR call stack data for new task will be restored.
When schedule out, the LBR call stack data for old task will be saved.
Only need to pass the required task_struct information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-4-kan.liang@linux.intel.com
|
|
The LBR call stack data has to be saved/restored during context switch
to fix the shorter LBRs call stacks issue in the system-wide mode.
Allocate PMU specific data and attach them to the corresponding
task_struct during LBR call stack monitoring.
When a LBR call stack event is accounted, the perf_ctx_data for the
related tasks will be allocated/attached by attach_perf_ctx_data().
When a LBR call stack event is unaccounted, the perf_ctx_data for
related tasks will be detached/freed by detach_perf_ctx_data().
The LBR call stack event could be a per-task event or a system-wide
event.
- For a per-task event, perf only allocates the perf_ctx_data for the
current task. If the allocation fails, perf will error out.
- For a system-wide event, perf has to allocate the perf_ctx_data for
both the existing tasks and the upcoming tasks.
The allocation for the existing tasks is done in perf_event_alloc().
If any allocation fails, perf will error out.
The allocation for the new tasks will be done in perf_event_fork().
A global reader/writer semaphore, global_ctx_data_rwsem, is added to
address the global race.
- The perf_ctx_data only be freed by the last LBR call stack event.
The number of the per-task events is tracked by refcount of each task.
Since the system-wide events impact all tasks, it's not practical to
go through the whole task list to update the refcount for each
system-wide event. The number of system-wide events is tracked by a
global variable global_ctx_data_ref.
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-3-kan.liang@linux.intel.com
|
|
To simplify the usage of the percpu rw semaphore.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-2-kan.liang@linux.intel.com
|
|
Some PMU specific data has to be saved/restored during context switch,
e.g. LBR call stack data. Currently, the data is saved in event context
structure, but only for per-process event. For system-wide event,
because of missing the LBR call stack data after context switch, LBR
callstacks are always shorter in comparison to per-process mode.
For example,
Per-process mode:
$perf record --call-graph lbr -- taskset -c 0 ./tchain_edit
- 99.90% 99.86% tchain_edit tchain_edit [.] f3
99.86% _start
__libc_start_main
generic_start_main
main
f1
- f2
f3
System-wide mode:
$perf record --call-graph lbr -a -- taskset -c 0 ./tchain_edit
- 99.88% 99.82% tchain_edit tchain_edit [.] f3
- 62.02% main
f1
f2
f3
- 28.83% f1
- f2
f3
- 28.83% f1
- f2
f3
- 8.88% generic_start_main
main
f1
f2
f3
It isn't practical to simply allocate the data for system-wide event in
CPU context structure for all tasks. We have no idea which CPU a task
will be scheduled to. The duplicated LBR data has to be maintained on
every CPU context structure. That's a huge waste. Otherwise, the LBR
data still lost if the task is scheduled to another CPU.
Save the pmu specific data in task_struct. The size of pmu specific data
is 788 bytes for LBR call stack. Usually, the overall amount of threads
doesn't exceed a few thousands. For 10K threads, keeping LBR data would
consume additional ~8MB. The additional space will only be allocated
during LBR call stack monitoring. It will be released when the
monitoring is finished.
Furthermore, moving task_ctx_data from perf_event_context to task_struct
can reduce complexity and make things clearer. E.g. perf doesn't need to
swap task_ctx_data on optimized context switch path.
This patch set is just the first step. There could be other
optimization/extension on top of this patch set. E.g. for cgroup
profiling, perf just needs to save/store the LBR call stack information
for tasks in specific cgroup. That could reduce the additional space.
Also, the LBR call stack can be available for software events, or allow
even debugging use cases, like LBRs on crash later.
Because of the alignment requirement of Intel Arch LBR, the Kmem cache
is used to allocate the PMU specific data. It's required when child task
allocates the space. Save it in struct perf_ctx_data.
The refcount in struct perf_ctx_data is used to track the users of pmu
specific data.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Link: https://lore.kernel.org/r/20250314172700.438923-1-kan.liang@linux.intel.com
|
|
The commit 97c79a38cd45 ("perf core: Per event callchain limit")
introduced a per-event term to allow finer tuning of the depth of
callchains to save space.
It should be applied to the branch stack as well. For example, autoFDO
collections require maximum LBR entries. In the meantime, other
system-wide LBR users may only be interested in the latest a few number
of LBRs. A per-event LBR depth would save the perf output buffer.
The patch simply drops the uninterested branches, but HW still collects
the maximum branches. There may be a model-specific optimization that
can reduce the HW depth for some cases to reduce the overhead further.
But it isn't included in the patch set. Because it's not useful for all
cases. For example, ARCH LBR can utilize the PEBS and XSAVE to collect
LBRs. The depth should have less impact on the collecting overhead.
The model-specific optimization may be implemented later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310181536.3645382-1-kan.liang@linux.intel.com
|
|
The poll man page says POLLRDNORM is equivalent to POLLIN. For poll(),
it seems that if user sets pollfd with POLLRDNORM in userspace, perf_poll
will not return until timeout even if perf_output_wakeup called,
whereas POLLIN returns.
Fixes: 76369139ceb9 ("perf: Split up buffer handling from core code")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314030036.2543180-1-chen.dylane@linux.dev
|
|
Pinned performance events can enter an error state when they fail to be
scheduled in the context due to a failed constraint or some other conflict
or condition.
In error state these events won't generate any samples anymore and are
silently ignored until they are recovered by PERF_EVENT_IOC_ENABLE,
or the condition can also change so that they can be scheduled in.
Tooling should be allowed to know about the state change, but
currently there's no mechanism to notify tooling when events enter
an error state.
One way to do this is to issue a POLLHUP event to poll(2) to handle this.
Reading events in an error state would return 0 (EOF) and it matches to
the behavior of POLLHUP according to the man page.
Tooling should remove the fd of the event from pollfd after getting
POLLHUP, otherwise it'll be returned repeatedly.
[ mingo: Clarified the changelog ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250317061745.1777584-1-namhyung@kernel.org
|
|
Follow the advice in Documentation/filesystems/sysfs.rst:
"- show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space."
No change in functionality intended.
[ mingo: Updated the changelog ]
Signed-off-by: XieLudan <xie.ludan@zte.com.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250315141738452lXIH39UJAXlCmcATCzcBv@zte.com.cn
|
|
The 'size' parameter is optional and strscpy() automatically determines
the length of the destination buffer using sizeof() if the argument is
omitted. This makes the explicit sizeof() calls unnecessary.
Furthermore, KSYM_NAME_LEN is equal to sizeof(name) and can also be
removed. Remove them to shorten and simplify the code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250310192336.442994-1-thorsten.blum@linux.dev
|
|
bts_ctx might not be allocated, for example if the CPU has X86_FEATURE_PTI,
but intel_bts_disable/enable_local() and intel_bts_interrupt() are called
unconditionally from intel_pmu_handle_irq() and crash on bts_ctx.
So check if bts_ctx is allocated when calling BTS functions.
Fixes: 3acfcefa795c ("perf/x86/intel/bts: Allocate bts_ctx only if necessary")
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250306051102.2642-1-lirongqing@baidu.com
|
|
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
|
|
When creating a new perf_event for the hardlockup watchdog, it should not
happen that the old perf_event is not released.
Introduce a WARN_ONCE() that should never trigger.
[ mingo: Changed the type of the warning to WARN_ONCE(). ]
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241021193004.308303-2-lihuafei1@huawei.com
|
|
During stress-testing, we found a kmemleak report for perf_event:
unreferenced object 0xff110001410a33e0 (size 1328):
comm "kworker/4:11", pid 288, jiffies 4294916004
hex dump (first 32 bytes):
b8 be c2 3b 02 00 11 ff 22 01 00 00 00 00 ad de ...;....".......
f0 33 0a 41 01 00 11 ff f0 33 0a 41 01 00 11 ff .3.A.....3.A....
backtrace (crc 24eb7b3a):
[<00000000e211b653>] kmem_cache_alloc_node_noprof+0x269/0x2e0
[<000000009d0985fa>] perf_event_alloc+0x5f/0xcf0
[<00000000084ad4a2>] perf_event_create_kernel_counter+0x38/0x1b0
[<00000000fde96401>] hardlockup_detector_event_create+0x50/0xe0
[<0000000051183158>] watchdog_hardlockup_enable+0x17/0x70
[<00000000ac89727f>] softlockup_start_fn+0x15/0x40
...
Our stress test includes CPU online and offline cycles, and updating the
watchdog configuration.
After reading the code, I found that there may be a race between cleaning up
perf_event after updating watchdog and disabling event when the CPU goes offline:
CPU0 CPU1 CPU2
(update watchdog) (hotplug offline CPU1)
... _cpu_down(CPU1)
cpus_read_lock() // waiting for cpu lock
softlockup_start_all
smp_call_on_cpu(CPU1)
softlockup_start_fn
...
watchdog_hardlockup_enable(CPU1)
perf create E1
watchdog_ev[CPU1] = E1
cpus_read_unlock()
cpus_write_lock()
cpuhp_kick_ap_work(CPU1)
cpuhp_thread_fun
...
watchdog_hardlockup_disable(CPU1)
watchdog_ev[CPU1] = NULL
dead_event[CPU1] = E1
__lockup_detector_cleanup
for each dead_events_mask
release each dead_event
/*
* CPU1 has not been added to
* dead_events_mask, then E1
* will not be released
*/
CPU1 -> dead_events_mask
cpumask_clear(&dead_events_mask)
// dead_events_mask is cleared, E1 is leaked
In this case, the leaked perf_event E1 matches the perf_event leak
reported by kmemleak. Due to the low probability of problem recurrence
(only reported once), I added some hack delays in the code:
static void __lockup_detector_reconfigure(void)
{
...
watchdog_hardlockup_start();
cpus_read_unlock();
+ mdelay(100);
/*
* Must be called outside the cpus locked section to prevent
* recursive locking in the perf code.
...
}
void watchdog_hardlockup_disable(unsigned int cpu)
{
...
perf_event_disable(event);
this_cpu_write(watchdog_ev, NULL);
this_cpu_write(dead_event, event);
+ mdelay(100);
cpumask_set_cpu(smp_processor_id(), &dead_events_mask);
atomic_dec(&watchdog_cpus);
...
}
void hardlockup_detector_perf_cleanup(void)
{
...
perf_event_release_kernel(event);
per_cpu(dead_event, cpu) = NULL;
}
+ mdelay(100);
cpumask_clear(&dead_events_mask);
}
Then, simultaneously performing CPU on/off and switching watchdog, it is
almost certain to reproduce this leak.
The problem here is that releasing perf_event is not within the CPU
hotplug read-write lock. Commit:
941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
introduced deferred release to solve the deadlock caused by calling
get_online_cpus() when releasing perf_event. Later, commit:
efe951d3de91 ("perf/x86: Fix perf,x86,cpuhp deadlock")
removed the get_online_cpus() call on the perf_event release path to solve
another deadlock problem.
Therefore, it is now possible to move the release of perf_event back
into the CPU hotplug read-write lock, and release the event immediately
after disabling it.
Fixes: 941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241021193004.308303-1-lihuafei1@huawei.com
|
|
Add the __counted_by() compiler attribute to the flexible array member
buf to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250305123134.215577-2-thorsten.blum@linux.dev
|
|
Make sure that perf_try_init_event() doesn't leave event->pmu nor
event->destroy set on failure.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250205102449.110145835@infradead.org
|
|
When f_ops->mmap() returns failure, m_ops->close() is *not* called.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135519.248358497@infradead.org
|
|
In prepration for being able to unregister a PMU with existing events,
it becomes important to detach struct perf_cpu_pmu_context lifetimes
from that of struct pmu.
Notably struct perf_cpu_pmu_context embeds a struct perf_event_pmu_context
that can stay referenced until the last event goes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.760214287@infradead.org
|
|
This puts 'all' of perf_mmap() under single event->mmap_mutex.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135519.582252957@infradead.org
|
|
AFAICT there is no actual benefit from the mutex drop on re-try. The
'worst' case scenario is that we instantly re-gain the mutex without
perf_mmap_close() getting it. So might as well make that the normal
case.
Reflow the code to make the ring buffer detach case naturally flow
into the no ring buffer case.
[ mingo: Forward ported it ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135519.463607258@infradead.org
|
|
Perform CSE and such.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135519.354909594@infradead.org
|
|
Identity-transform:
if (c) {
X1;
} else {
Y;
goto l;
}
X2;
l:
into the simpler:
if (c) {
X1;
X2;
} else {
Y;
}
[ mingo: Forward ported it ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135519.095904637@infradead.org
|
|
Ensure perf_event_free_bpf_prog() is safe to call a second time;
notably without making any references to event->pmu when there is no
prog left.
Note: perf_event_detach_bpf_prog() might leave a stale event->prog
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241104135518.978956692@infradead.org
|
|
Replace _free_event()'s use of perf_addr_filters_splice()s use with an
explicit perf_free_addr_filters() with the explicit propery that it is
able to be called a second time without ill effect.
Most notable, referencing event->pmu must be avoided when there are no
filters left (from eg a previous call).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.868460518@infradead.org
|
|
As a preparation for adding yet another indirection.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.650051565@infradead.org
|
|
Because it makes no sense to have two per-cpu allocations per pmu.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.518730578@infradead.org
|
|
Using the previous simplifications, transition perf_event_alloc() to
the cleanup way of things -- reducing error path magic.
[ mingo: Ported it to recent kernels. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.410755241@infradead.org
|
|
Use the <linux/cleanup.h> guard() and scoped_guard() infrastructure
to simplify the control flow.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20241104135518.302444446@infradead.org
|
|
Using the previously introduced perf_pmu_free() and a new IDR helper,
simplify the perf_pmu_register error paths.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.198937277@infradead.org
|
|
The error path of perf_pmu_register() is of course very similar to a
subset of perf_pmu_unregister(). Extract this common part in
perf_pmu_free() and simplify things.
[ mingo: Forward ported it ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.090915501@infradead.org
|
|
The error cleanup sequence in perf_event_alloc() is a subset of the
existing _free_event() function (it must of course be).
Split this out into __free_event() and simplify the error path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135517.967889521@infradead.org
|
|
Currently, __reserve_bp_slot() returns -ENOSPC for unsupported
breakpoint types on the architecture. For example, powerpc
does not support hardware instruction breakpoints. This causes
the perf_skip BPF selftest to fail, as neither ENOENT nor
EOPNOTSUPP is returned by perf_event_open for unsupported
breakpoint types. As a result, the test that should be skipped
for this arch is not correctly identified.
To resolve this, hw_breakpoint_event_init() should exit early by
checking for unsupported breakpoint types using
hw_breakpoint_slots_cached() and return the appropriate error
(-EOPNOTSUPP).
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lore.kernel.org/r/20250303092451.1862862-1-skb99@linux.ibm.com
|
|
There is a fairly obvious race between perf_init_event() doing
idr_find() and perf_pmu_register() doing idr_alloc() with an
incompletely initialized PMU pointer.
Avoid by doing idr_alloc() on a NULL pointer to register the id, and
swizzling the real struct pmu pointer at the end using idr_replace().
Also making sure to not set struct pmu members after publishing
the struct pmu, duh.
[ introduce idr_cmpxchg() in order to better handle the idr_replace()
error case -- if it were to return an unexpected pointer, it will
already have replaced the value and there is no going back. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.858805880@infradead.org
|
|
Commit a63fbed776c7 ("perf/tracing/cpuhotplug: Fix locking order")
placed pmus_lock inside pmus_srcu, this makes perf_pmu_unregister()
trip lockdep.
Move the locking about such that only pmu_idr and pmus (list) are
modified while holding pmus_lock. This avoids doing synchronize_srcu()
while holding pmus_lock and all is well again.
Fixes: a63fbed776c7 ("perf/tracing/cpuhotplug: Fix locking order")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.679556858@infradead.org
|
|
This reverts commit cc77e2ce187d26cc66af3577bf896d7410eb25ab.
It was reported that adding ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives
breaks entering lower package states for certain systems.
It turns out that Samsung SSD 870 QVO actually has working LPM when using
a recent SSD firmware version.
The author of commit cc77e2ce187d ("ata: libata-core: Add ATA_QUIRK_NOLPM
for Samsung SSD 870 QVO drives") reported himself that only older SSD
firmware versions have broken LPM:
https://lore.kernel.org/stable/93c10d38-718c-459d-84a5-4d87680b4da7@debian.org/
Unfortunately, he did not specify which older firmware version he was using
which had broken LPM.
Let's revert this quirk, which has FW version field specified as NULL
(which means that it applies for all Samsung SSD 870 QVO firmware versions)
for now. Once the author reports which older firmware version(s) that are
broken, we can create a more fine grained quirk, which populates the FW
version field accordingly.
Fixes: cc77e2ce187d ("ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives")
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219747
Link: https://lore.kernel.org/r/20250228122603.91814-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables")
Reported-by: Fab Stz <fabstz-it@yahoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Fab Stz <fabstz-it@yahoo.fr>
Cc: All applicable <stable@vger.kernel.org>
Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr
Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Fixes: d74169ceb0d2 ("iommu/vt-d: Allocate DMAR fault interrupts locally")
Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/
Tested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain")
Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When updating the page table root field on the DTE, avoid overwriting any
bits that are already set. The earlier call to make_clear_dte() writes
default values that all DTEs must have set (currently DTE[V]), and those
must be preserved.
Currently this doesn't cause problems since the page table root update is
the first field that is set after make_clear_dte() is called, and
DTE_FLAG_V is set again later along with the permission bits (IR/IW).
Remove this redundant assignment too.
Fixes: fd5dff9de4be ("iommu/amd: Modify set_dte_entry() to use 256-bit DTE helpers")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250106191413.3107140-1-alejandro.j.jimenez@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier.
Cc: stable@vger.kernel.org
Cc: Wen Yang <wenyang@linux.alibaba.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250206090156.1561783-1-kniv@yandex-team.ru
Fixes: e31f7939c1c27 ("ftrace: Avoid potential division by zero in function profiler")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792b9 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home
Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
|
|
Tweak the logic that traverses the MOKVAR UEFI configuration table to
only unmap the entry header and map the next one if they don't live in
the same physical page.
Link: https://lore.kernel.org/all/8f085931-3e9d-4386-9209-1d6c95616327@uncooperative.org/
Tested-By: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Fixes: c1e0230eeaab2 ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header
is not set yet.
This triggers the following warning for CONFIG_DEBUG_NET=y builds.
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb))
[ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth
[ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697
[ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748)
[ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261687] ? report_bug (lib/bug.c:?)
[ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285)
[ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309)
[ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf
[ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf
[ 69.261712] __napi_poll (net/core/dev.c:7194)
[ 69.261716] net_rx_action (net/core/dev.c:7265)
[ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293)
[ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288)
[ 69.261726] handle_softirqs (kernel/softirq.c:561)
Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Kan Liang
Peter Zijlstra (Intel)
Tao Chen
Namhyung Kim
XieLudan
Thorsten Blum
Li RongQing
Jiri Olsa
Li Huafei
Saket Kumar Bhaskar
Niklas Cassel
Keith Busch
Thomas Gleixner
Ming Lei
Lu Baolu
Jerry Snitselaar
Alejandro Jimenez
Nikolay Kuratov
Heiko Carstens
Steven Rostedt
Ard Biesheuvel
Peter Jones
Meghana Malladi
Eric Dumazet