| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer
exception happens occasionally on serial output initiated by login
timeout.
This was reproduced only if kernel was built with significant debugging
options and EDMA driver is used with serial console.
Issue looks like a race condition between interrupt handler
fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and
terminating the transfer with fsl_edma_terminate_all().
The fsl_edma_tx_handler() handles interrupt for a transfer with already
freed edesc and idle==true.
The mcf-edma driver shares design and lot of code with fsl-edma. It
looks like being affected by same problem. Fix this pattern the same
way as fix for fsl-edma driver.
Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
NULL pointer exception happens occasionally on serial output initiated
by login timeout. This was reproduced only if kernel was built with
significant debugging options and EDMA driver is used with serial
console.
col-vf50 login: root
Password:
Login timed out after 60 seconds.
Unable to handle kernel NULL pointer dereference at virtual address 00000044
Internal error: Oops: 5 [#1] ARM
CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304)
(__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c)
(handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c)
(handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160)
(handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44)
(generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8)
(__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80)
(gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98)
Exception stack(0x8459fe80 to 0x8459fec8)
fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013
fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec
fec0: 60070013 ffffffff
(__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58)
(_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8)
(uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac)
(tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc)
(__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c)
(disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0)
(do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4)
(do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14)
Issue looks like race condition between interrupt handler fsl_edma_tx_handler()
(called as result of fsl_edma_xfer_desc()) and terminating the transfer with
fsl_edma_terminate_all().
The fsl_edma_tx_handler() handles interrupt for a transfer with already freed
edesc and idle==true.
Fixes: d6be34fbd39b ("dma: Add Freescale eDMA engine driver support")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add lockdep assert for an exported function expected to be called under
spin lock. Since this function is called in different modules, the
lockdep assert will be self-documenting note about need for locking.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591877861-28156-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix the hw descriptor fields for delta record in user exported idxd.h
header. Missing the "expected result mask" field.
Reported-by: Mona Hossain <mona.hossain@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159120526866.65385.536565786678052944.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
if of_find_device_by_node() succeed and platform_get_drvdata() failed,
of_xudma_dev_get() will return without put_device(), which will leak
the memory.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200618130110.582543-1-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A client driver (renesas_usbhs) assumed that
dmaengine_tx_status() could return the residue even if
the transfer was completed. However, this was not correct
usage [1] and this caused to break getting the residue after
the commit 24461d9792c2 ("dmaengine: virt-dma: Fix access after
free in vchan_complete()") actually. So, this is possible to get
wrong received size if the usb controller gets a short packet.
For example, g_zero driver causes "bad OUT byte" errors.
To use the tx_result from the renesas_usbhs driver when
the transfer is completed, set the tx_result parameters.
Notes that the renesas_usbhs driver needs to update for it.
[1]
https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Fixes: 24461d9792c2 ("dmaengine: virt-dma: Fix access after free in vchan_complete()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
INIT_DELAYED_WORK_ONSTACK() must be used with on-stack delayed work, which
is not the case here.
Use normal delayed_work for the channels instead.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA")
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200618114004.6268-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
add the wq lock in cdev open and release call. This fixes
race conditions observed in the open and close routines.
Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159285824892.64944.2905413694915141834.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
event_id0 is defined as 'unsigned int', so it is always greater or
equal to zero.
Remove the unneeded comparisons to fix the following W=1 build
warning:
drivers/dma/imx-sdma.c: In function 'sdma_free_chan_resources':
drivers/dma/imx-sdma.c:1334:23: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
1334 | if (sdmac->event_id0 >= 0)
| ^~
drivers/dma/imx-sdma.c: In function 'sdma_config':
drivers/dma/imx-sdma.c:1635:23: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
1635 | if (sdmac->event_id0 >= 0) {
|
Fixes: 25962e1a7f1d ("dmaengine: imx-sdma: Fix the event id check to include RX event for UART6")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20200621155730.28766-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
I have switched DMAengine tree to kernel.org now, so update in
MAINTAINERS file
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200623143729.781403-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In the unlikely case when the channel is running (RT enabled) during
alloc_chan_resources then we should use udma_reset_chan() and not
udma_stop() as the later is trying to initiate a teardown on the channel,
which is not valid at this point.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200527070612.636-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some of the earlier errors should be sent to the error cleanup path to
make sure that the uchan struct is reset, the dma_pool (if allocated) is
released and memcpy channel pairs are released in a correct way.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200527070612.636-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The "ti,udma-atype" property is expected in the UDMA node and not in the
parent navss node.
Fixes: 0ebcf1a274c5 ("dmaengine: ti: k3-udma: Implement support for atype (for virtualization)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200527065357.30791-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
|
|
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
|
|
This reverts commit a43a67a2d715540c1368b9501a22b0373b5874c0.
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Krzysztof Kozlowski
Dave Jiang
Yu Kuai
Yoshihiro Shimoda
Peter Ujfalusi
Nikhil Rao
Fabio Estevam
Vinod Koul
Linus Torvalds
Thomas Cedeno
David Sterba
Grygorii Strashko
Liao Pingfang