| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We can configure voltage controller for cpcap with the data available in
Motorola Mapphone Android Linux kernel. Let's add it so we can have droid4
behave the same way for voltage controller as other omap4 devices and save
some power when idle.
Note that we're now using high-speed i2c mode, looks like the Motorola
kernel had a typo using 0x200 instead of 200 for the timings which may
caused it to not work properly.
Also note that in the long run, this should just become dts data for a
voltage controller device driver. But let's get things working first to
make it possible to test further changes easily.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The current operating points in the mainline kernel are out of date for
at least omap4430. Let's use the values from Motorola Mapphone Linux
Android kernel as presumably those have been verified.
Note that these are only used by voltage controller, they do not enable
any new operating points for cpufreq. Looking at the recent omap3 cpufreq
related patches posted, that's a totally separate series of patches.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In general we want to see a quiet dmesg output with no errors or warnings
unless something is really wrong and needs attention. We currently see
these bogus warnings on boot:
twl: not initialized
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
...
Let's avoid these by checking if a device tree node for cpcap PMIC exists.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The wkup domain is always on and does not have logic off setting. This
got accidentally added by commit f74297dd9354 ("ARM: OMAP2+: Make sure
LOGICRETSTATE bits are not cleared") but is harmless.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
After commit 32d174ed1bd7 ("ARM: OMAP4: MPUSS PM: remove unnecessary
shim functions for powerdomain control") this is no longer used.
The code continues execution after context restore on the same CPU,
so we can just use pm_info->pwrdm.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Commit 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge
sensitive interrupt") changed wlcore interrupts to use edge interrupt based
on what's specified in the wl1835mod.pdf data sheet.
However, there are still cases where we can have lost interrupts as
described in omap_gpio_unidle(). And using a level interrupt instead of edge
interrupt helps as we avoid the check for untriggered GPIO interrupts in
omap_gpio_unidle().
And with commit e6818d29ea15 ("gpio: gpio-omap: configure edge detection
for level IRQs for idle wakeup") GPIOs idle just fine with level interrupts.
Let's change omap4 and 5 wlcore users back to using level interrupt
instead of edge interrupt. Let's not change the others as I've only seen
this on omap4 and 5, probably because the other SoCs don't have l4per idle
independent of the CPUs.
Fixes: 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt")
Depends-on: e6818d29ea15 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Eyal Reizer <eyalr@ti.com>
Cc: Guy Mishol <guym@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
According to
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt,
i2c-mux-idle-disconnect is a property of a parent node since it
pertains to the mux/switch as a whole, so move it there and drop all
of the concurrences in child nodes.
Fixes: d031773169df ("ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The clkctrl code searches for the parent clockdomain based on the name
of the CM provider node. The introduction of SGX node for omap5 made
the node name for the gpu_cm to be clock-controller. There is no
clockdomain named like this, so the lookup fails. Fix by changing
the node name properly.
Fixes: 394534cb07d8 ("ARM: dts: Configure sgx for omap5")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The TWL4030 used on the Logit PD Torpedo SOM does not have the
keypad pins routed. This patch disables the twl_keypad driver
to remove some splat during boot:
twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22
twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22
Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: removed error time stamps]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The old omapdrm panels got removed for v5.4 in favor of generic panels,
and the Kconfig options changed. Let's update omap2plus_defconfig
accordingly so the same panels are still enabled.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
|
|
Set memory bandwidth limit to filter out resolutions above 720p@60Hz to
avoid underflow errors due to the bandwidth needs of higher resolutions.
am43xx can not provide enough bandwidth to DISPC to correctly handle
'high' resolutions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Move the static keyword to the front of declaration of
csky_pmu_of_device_ids, and resolve the following compiler
warning that can be seen when building with warnings
enabled (W=1):
arch/csky/kernel/perf_event.c:1340:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
|
|
Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
|
|
The csky_pmu.max_period has type u64, and BIT() can only return
32 bits unsigned long on C-SKY. The initialization for max_period
will be incorrect when count_width is bigger than 32.
Use BIT_ULL()
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
We need set fp zero to let backtrace know the end. The patch fixup perf
callchain panic problem, because backtrace didn't know what is the end
of fp.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reported-by: Mao Han <han_mao@c-sky.com>
|
|
The csky implementation of free_initrd_mem() is an open-coded version of
free_reserved_area() without poisoning.
Remove it and make csky use the generic version of free_initrd_mem().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
|
|
This reverts commit 72dbcf72156641fde4d8ea401e977341bfd35a05.
Instead of waiting forever for entropy that may just not happen, we now
try to actively generate entropy when required, and are thus hopefully
avoiding the problem that caused the nice ext4 IO pattern fix to be
reverted.
So revert the revert.
Cc: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For 5.3 we had to revert a nice ext4 IO pattern improvement, because it
caused a bootup regression due to lack of entropy at bootup together
with arguably broken user space that was asking for secure random
numbers when it really didn't need to.
See commit 72dbcf721566 (Revert "ext4: make __ext4_get_inode_loc plug").
This aims to solve the issue by actively generating entropy noise using
the CPU cycle counter when waiting for the random number generator to
initialize. This only works when you have a high-frequency time stamp
counter available, but that's the case on all modern x86 CPU's, and on
most other modern CPU's too.
What we do is to generate jitter entropy from the CPU cycle counter
under a somewhat complex load: calling the scheduler while also
guaranteeing a certain amount of timing noise by also triggering a
timer.
I'm sure we can tweak this, and that people will want to look at other
alternatives, but there's been a number of papers written on jitter
entropy, and this should really be fairly conservative by crediting one
bit of entropy for every timer-induced jump in the cycle counter. Not
because the timer itself would be all that unpredictable, but because
the interaction between the timer and the loop is going to be.
Even if (and perhaps particularly if) the timer actually happens on
another CPU, the cacheline interaction between the loop that reads the
cycle counter and the timer itself firing is going to add perturbations
to the cycle counter values that get mixed into the entropy pool.
As Thomas pointed out, with a modern out-of-order CPU, even quite simple
loops show a fair amount of hard-to-predict timing variability even in
the absense of external interrupts. But this tries to take that further
by actually having a fairly complex interaction.
This is not going to solve the entropy issue for architectures that have
no CPU cycle counter, but it's not clear how (and if) that is solvable,
and the hardware in question is largely starting to be irrelevant. And
by doing this we can at least avoid some of the even more contentious
approaches (like making the entropy waiting time out in order to avoid
the possibly unbounded waiting).
Cc: Ahmed Darwish <darwish.07@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Nicholas Mc Guire <hofrat@opentech.at>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The role of the contact list provided by the disclosing party and how it
affects the disclosure process and the ability to include experts into
the development process is not really well explained.
Neither is it entirely clear when the disclosing party will be informed
about the fact that a developer who is not covered by an employer NDA needs
to be brought in and disclosed.
Explain the role of the contact list and the information policy along with
an eventual conflict resolution better.
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.1909251028390.10825@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "same probe" selftest that tests that adding the same probe fails
doesn't add the same probe and passes, which fails the test.
Fixes: b78b94b82122 ("selftests/ftrace: Update kprobe event error testcase")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
To improve the readability of raw slab trace points, print the call_site ip
using '%pS'. Then we can grep events with function names.
[002] .... 808.188897: kmem_cache_free: call_site=putname+0x47/0x50 ptr=00000000cef40c80
[002] .... 808.188898: kfree: call_site=security_cred_free+0x42/0x50 ptr=0000000062400820
[002] .... 808.188904: kmem_cache_free: call_site=put_cred_rcu+0x88/0xa0 ptr=0000000058d74ef8
[002] .... 808.188913: kmem_cache_alloc: call_site=prepare_creds+0x26/0x100 ptr=0000000058d74ef8 bytes_req=168 bytes_alloc=576 gfp_flags=GFP_KERNEL
[002] .... 808.188917: kmalloc: call_site=security_prepare_creds+0x77/0xa0 ptr=0000000062400820 bytes_req=8 bytes_alloc=336 gfp_flags=GFP_KERNEL|__GFP_ZERO
[002] .... 808.188920: kmem_cache_alloc: call_site=getname_flags+0x4f/0x1e0 ptr=00000000cef40c80 bytes_req=4096 bytes_alloc=4480 gfp_flags=GFP_KERNEL
[002] .... 808.188925: kmem_cache_free: call_site=putname+0x47/0x50 ptr=00000000cef40c80
[002] .... 808.188926: kfree: call_site=security_cred_free+0x42/0x50 ptr=0000000062400820
[002] .... 808.188931: kmem_cache_free: call_site=put_cred_rcu+0x88/0xa0 ptr=0000000058d74ef8
Link: http://lkml.kernel.org/r/20190914103215.23301-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In predicate_parse, there is an error path that is not going to
out_free instead it returns directly which leads to a memory leak.
Link: http://lkml.kernel.org/r/20190920225800.3870-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
After r372664 in clang, the IF_ASSIGN macro causes a couple hundred
warnings along the lines of:
kernel/trace/trace_output.c:1331:2: warning: converting the enum
constant to a boolean [-Wint-in-bool-context]
kernel/trace/trace.h:409:3: note: expanded from macro
'trace_assign_type'
IF_ASSIGN(var, ent, struct ftrace_graph_ret_entry,
^
kernel/trace/trace.h:371:14: note: expanded from macro 'IF_ASSIGN'
WARN_ON(id && (entry)->type != id); \
^
264 warnings generated.
This warning can catch issues with constructs like:
if (state == A || B)
where the developer really meant:
if (state == A || state == B)
This is currently the only occurrence of the warning in the kernel
tree across defconfig, allyesconfig, allmodconfig for arm32, arm64,
and x86_64. Add the implicit '!= 0' to the WARN_ON statement to fix
the warnings and find potential issues in the future.
Link: https://github.com/llvm/llvm-project/commit/28b38c277a2941e9e891b2db30652cfd962f070b
Link: https://github.com/ClangBuiltLinux/linux/issues/686
Link: http://lkml.kernel.org/r/20190926162258.466321-1-natechancellor@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Steven reported that a test triggered:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_kprobe_create+0xa9e/0xe40
Read of size 8 at addr ffff8880c4f25a48 by task ftracetest/4798
CPU: 2 PID: 4798 Comm: ftracetest Not tainted 5.3.0-rc6-test+ #30
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
Call Trace:
dump_stack+0x7c/0xc0
? trace_kprobe_create+0xa9e/0xe40
print_address_description+0x6c/0x332
? trace_kprobe_create+0xa9e/0xe40
? trace_kprobe_create+0xa9e/0xe40
__kasan_report.cold.6+0x1a/0x3b
? trace_kprobe_create+0xa9e/0xe40
kasan_report+0xe/0x12
trace_kprobe_create+0xa9e/0xe40
? print_kprobe_event+0x280/0x280
? match_held_lock+0x1b/0x240
? find_held_lock+0xac/0xd0
? fs_reclaim_release.part.112+0x5/0x20
? lock_downgrade+0x350/0x350
? kasan_unpoison_shadow+0x30/0x40
? __kasan_kmalloc.constprop.6+0xc1/0xd0
? trace_kprobe_create+0xe40/0xe40
? trace_kprobe_create+0xe40/0xe40
create_or_delete_trace_kprobe+0x2e/0x60
trace_run_command+0xc3/0xe0
? trace_panic_handler+0x20/0x20
? kasan_unpoison_shadow+0x30/0x40
trace_parse_run_command+0xdc/0x163
vfs_write+0xe1/0x240
ksys_write+0xba/0x150
? __ia32_sys_read+0x50/0x50
? tracer_hardirqs_on+0x61/0x180
? trace_hardirqs_off_caller+0x43/0x110
? mark_held_locks+0x29/0xa0
? do_syscall_64+0x14/0x260
do_syscall_64+0x68/0x260
Fix to check the difference of nr_args before adding probe
on existing probes. This also may set the error log index
bigger than the number of command parameters. In that case
it sets the error position is next to the last parameter.
Link: http://lkml.kernel.org/r/156966474783.3478.13217501608215769150.stgit@devnote2
Fixes: ca89bc071d5e ("tracing/kprobe: Add multi-probe per event support")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
For systems configured to always try hard to allocate transparent
hugepages (thp defrag setting of "always") or for memory that has been
explicitly madvised to MADV_HUGEPAGE, it is often better to fallback to
remote memory to allocate the hugepage if the local allocation fails
first.
The point is to allow the initial call to __alloc_pages_node() to attempt
to defragment local memory to make a hugepage available, if possible,
rather than immediately fallback to remote memory. Local hugepages will
always have a better access latency than remote (huge)pages, so an attempt
to make a hugepage available locally is always preferred.
If memory compaction cannot be successful locally, however, it is likely
better to fallback to remote memory. This could take on two forms: either
allow immediate fallback to remote memory or do per-zone watermark checks.
It would be possible to fallback only when per-zone watermarks fail for
order-0 memory, since that would require local reclaim for all subsequent
faults so remote huge allocation is likely better than thrashing the local
zone for large workloads.
In this case, it is assumed that because the system is configured to try
hard to allocate hugepages or the vma is advised to explicitly want to try
hard for hugepages that remote allocation is better when local allocation
and memory compaction have both failed.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memory compaction has a couple significant drawbacks as the allocation
order increases, specifically:
- isolate_freepages() is responsible for finding free pages to use as
migration targets and is implemented as a linear scan of memory
starting at the end of a zone,
- failing order-0 watermark checks in memory compaction does not account
for how far below the watermarks the zone actually is: to enable
migration, there must be *some* free memory available. Per the above,
watermarks are not always suffficient if isolate_freepages() cannot
find the free memory but it could require hundreds of MBs of reclaim to
even reach this threshold (read: potentially very expensive reclaim with
no indication compaction can be successful), and
- if compaction at this order has failed recently so that it does not even
run as a result of deferred compaction, looping through reclaim can often
be pointless.
For hugepage allocations, these are quite substantial drawbacks because
these are very high order allocations (order-9 on x86) and falling back to
doing reclaim can potentially be *very* expensive without any indication
that compaction would even be successful.
Reclaim itself is unlikely to free entire pageblocks and certainly no
reliance should be put on it to do so in isolation (recall lumpy reclaim).
This means we should avoid reclaim and simply fail hugepage allocation if
compaction is deferred.
It is also not helpful to thrash a zone by doing excessive reclaim if
compaction may not be able to access that memory. If order-0 watermarks
fail and the allocation order is sufficiently large, it is likely better
to fail the allocation rather than thrashing the zone.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 92717d429b38e4f9f934eed7e605cc42858f1839.
Since commit a8282608c88e ("Revert "mm, thp: restore node-local hugepage
allocations"") is reverted in this series, it is better to restore the
previous 5.2 behavior between the thp allocation and the page allocator
rather than to attempt any consolidation or cleanup for a policy that is
now reverted. It's less risky during an rc cycle and subsequent patches
in this series further modify the same policy that the pre-5.3 behavior
implements.
Consolidation and cleanup can be done subsequent to a sane default page
allocation strategy, so this patch reverts a cleanup done on a strategy
that is now reverted and thus is the least risky option.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit a8282608c88e08b1782141026eab61204c1e533f.
The commit references the original intended semantic for MADV_HUGEPAGE
which has subsequently taken on three unique purposes:
- enables or disables thp for a range of memory depending on the system's
config (is thp "enabled" set to "always" or "madvise"),
- determines the synchronous compaction behavior for thp allocations at
fault (is thp "defrag" set to "always", "defer+madvise", or "madvise"),
and
- reverts a previous MADV_NOHUGEPAGE (there is no madvise mode to only
clear previous hugepage advice).
These are the three purposes that currently exist in 5.2 and over the
past several years that userspace has been written around. Adding a
NUMA locality preference adds a fourth dimension to an already conflated
advice mode.
Based on the semantic that MADV_HUGEPAGE has provided over the past
several years, there exist workloads that use the tunable based on these
principles: specifically that the allocation should attempt to
defragment a local node before falling back. It is agreed that remote
hugepages typically (but not always) have a better access latency than
remote native pages, although on Naples this is at parity for
intersocket.
The revert commit that this patch reverts allows hugepage allocation to
immediately allocate remotely when local memory is fragmented. This is
contrary to the semantic of MADV_HUGEPAGE over the past several years:
that is, memory compaction should be attempted locally before falling
back.
The performance degradation of remote hugepages over local hugepages on
Rome, for example, is 53.5% increased access latency. For this reason,
the goal is to revert back to the 5.2 and previous behavior that would
attempt local defragmentation before falling back. With the patch that
is reverted by this patch, we see performance degradations at the tail
because the allocator happily allocates the remote hugepage rather than
even attempting to make a local hugepage available.
zone_reclaim_mode is not a solution to this problem since it does not
only impact hugepage allocations but rather changes the memory
allocation strategy for *all* page allocations.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add read-only versions of all EEPROMs. These versions are read-only
on the i2c side, but can be written from the sysfs side.
Signed-off-by: Björn Ardö <bjorn.ardo@axis.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Commit b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH
and beyond") looks like to drop by accident Block Write-Block Read Process
Call support for Intel Sunrisepoint, Lewisburg, Denverton and Kaby Lake.
That support was added for above and newer platforms by the commit
315cd67c9453 ("i2c: i801: Add Block Write-Block Read Process Call
support") so bring it back for above platforms.
Fixes: b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The NACKF flag should be cleared in INTRIICNAKI interrupt processing as
description in HW manual.
This issue shows up quickly when PREEMPT_RT is applied and a device is
probed that is not plugged in (like a touchscreen controller). The result
is endless interrupts that halt system boot.
Fixes: 310c18a41450 ("i2c: riic: add driver")
Cc: stable@vger.kernel.org
Reported-by: Chien Nguyen <chien.nguyen.eb@rvc.renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We have a production-level laptop (Lenovo Yoga C630) which is exhibiting
a rather horrific bug. When I2C HID devices are being scanned for at
boot-time the QCom Geni based I2C (Serial Engine) attempts to use DMA.
When it does, the laptop reboots and the user never sees the OS.
Attempts are being made to debug the reason for the spontaneous reboot.
No luck so far, hence the requirement for this hot-fix. This workaround
will be removed once we have a viable fix.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The traversing of this list requires protection_domain->lock to be taken
to avoid nasty races with attach/detach code. Make sure the lock is held
on all code-paths traversing this list.
Reported-by: Filippo Sironi <sironi@amazon.de>
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Make sure that attaching a detaching a device can't race against each
other and protect the iommu_dev_data with a spin_lock in these code
paths.
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Check early in attach_device whether the device is already attached to a
domain. This also simplifies the code path so that __attach_device() can
be removed.
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The code-paths before __attach_device() and __detach_device() are called
also access and modify domain state, so take the domain lock there too.
This allows to get rid of the __detach_device() function.
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The lock is not necessary because the device table does not
contain shared state that needs protection. Locking is only
needed on an individual entry basis, and that needs to
happen on the iommu_dev_data level.
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This struct member was used to track whether a domain
change requires updates to the device-table and IOMMU cache
flushes. The problem is, that access to this field is racy
since locking in the common mapping code-paths has been
eliminated.
Move the updated field to the stack to get rid of all
potential races and remove the field from the struct.
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a statement that is indented too deeply, remove
the extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In nfp_abm_u32_knode_replace if the allocation for match fails it should
go to the error handling instead of returning. Updated other gotos to
have correct errno returned, too.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the GL9750 and GL9755 chipsets.
Enable v4 mode and wait 5ms after set 1.8V signal enable for GL9750/
GL9755. Fix the value of SDHCI_MAX_CURRENT register and use the vendor
tuning flow for GL9750.
Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Yuchung Cheng and Marek Majkowski independently reported a weird
behavior of TCP_USER_TIMEOUT option when used at connect() time.
When the TCP_USER_TIMEOUT is reached, tcp_write_timeout()
believes the flow should live, and the following condition
in tcp_clamp_rto_to_user_timeout() programs one jiffie timers :
remaining = icsk->icsk_user_timeout - elapsed;
if (remaining <= 0)
return 1; /* user timeout has passed; fire ASAP */
This silly situation ends when the max syn rtx count is reached.
This patch makes sure we honor both TCP_SYNCNT and TCP_USER_TIMEOUT,
avoiding these spurious SYN packets.
Fixes: b701a99e431d ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Cc: Jon Maxwell <jmaxwell37@gmail.com>
Link: https://marc.info/?l=linux-netdev&m=156940118307949&w=2
Acked-by: Jon Maxwell <jmaxwell37@gmail.com>
Tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Marek Majkowski <marek@cloudflare.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have a 3rd extension, add a new helper that drops the
extension space and use it when we need to scrub an sk_buff.
At this time, scrubbing clears secpath and bridge netfilter data, but
retains the tc skb extension, after this patch all three get cleared.
NAPI reuse/free assumes we can only have a secpath attached to skb, but
it seems better to clear all extensions there as well.
v2: add unlikely hint (Eric Dumazet)
Fixes: 95a7233c452a ("net: openvswitch: Set OvS recirc_id from tc chain index")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There was a bug in the previous logic that attempted to ensure gain cycling
gets inflight above BDP even for small BDPs. This code correctly raised and
lowered target inflight values during the gain cycle. And this code
correctly ensured that cwnd was raised when probing bandwidth. However, it
did not correspondingly ensure that cwnd was *not* raised in this way when
*not* probing for bandwidth. The result was that small-BDP flows that were
always cwnd-bound could go for many cycles with a fixed cwnd, and not probe
or yield bandwidth at all. This meant that multiple small-BDP flows could
fail to converge in their bandwidth allocations.
Fixes: 3c346b233c68 ("tcp_bbr: fix bw probing to raise in-flight data for very small BDPs")
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ASIC can only mirror a packet to one port, but when user is trying
to set more than one mirror action, it doesn't fail.
Add a check if more than one mirror action was specified per rule and if so,
fail for not being supported.
Fixes: d0d13c1858a11 ("mlxsw: spectrum_acl: Add support for mirror action")
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alex noted that the below description might not be obvious to all users.
Clarify it by adding an example.
Fixes: f3047ca01f12 ("Documentation: Add devlink-trap documentation")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Reviewed-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a port is created, its VLAN filters are not cleared by the
firmware. This causes tagged packets to be later dropped by the ingress
STP filters, which default to DISCARD state.
The above did not matter much until commit b5ce611fd96e ("mlxsw:
spectrum: Add devlink-trap support") where we exposed the drop reason to
users.
Without this patch, the drop reason users will see is not consistent. If
a port is enslaved to a VLAN-aware bridge and a packet with an invalid
VLAN tries to ingress the bridge, it will be dropped due to ingress STP
filter. If the VLAN is later enabled and then disabled, the packet will
be dropped by the ingress VLAN filter despite the above being a
seemingly NOP operation.
Fix this by clearing all the VLAN filters during port initialization.
Adjust the test accordingly.
Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There memset is indented incorrectly, remove the extraneous tabs.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The return statement is indented incorrectly, add in a missing
tab and remove an extraneous space after the return
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Tony Lindgren
Andrey Smirnov
Tero Kristo
Adam Ford
Linus Torvalds
Peter Ujfalusi
Krzysztof Wilczynski
Valentin Schneider
Mao Han
Guo Ren
Mike Rapoport
Thomas Gleixner
Steven Rostedt (VMware)
Changbin Du
Navid Emamdoost
Nathan Chancellor
Masami Hiramatsu
David Rientjes
Björn Ardö
Jarkko Nikula
Chris Brandt
Lee Jones
Joerg Roedel
Colin Ian King
Ben Chuang
Eric Dumazet
Florian Westphal
Kevin(Yudong) Yang
Danielle Ratson
Ido Schimmel