aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-27ARM: multi_v7_defconfig: enable thermal driver for i.MX devicesStefan Agner1-0/+1
Enable the i.MX thermal driver required for i.MX SoC family. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add RN5T618 PMIC family supportStefan Agner1-0/+3
This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add NXP graphics driversStefan Agner1-0/+3
Enable drivers to support NXP graphics IPs such as: - Etnaviv (e.g. i.MX6) - DCU (e.g. Vybrid LS1021A) - mxsfb (e.g. i.MX6UL/ULL/7) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add GPMI NAND controller supportStefan Agner1-0/+1
Add GPMI NAND controller support as required by some NXP i.MX6/7 based boards. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCsStefan Agner1-0/+2
Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs. Since OTP values might be required by drivers required during boot, make sure the driver is built-in (e.g. i.MX thermal driver). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: multi_v7_defconfig: configure I2C driver built-inStefan Agner1-1/+1
PMIC often require the I2C bus, and the PMIC regulators might be necessary to power on eMMC/SD-card or other supplies required for successful boot. Make sure I2C driver for i.MX devices is built-in. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVEKunihiko Hayashi1-0/+2
Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: imx: fix imx6sll-only buildArnd Bergmann1-0/+1
When selecting SOC_IMX6SLL but not SOC_IMX6SL, we get a link error: arch/arm/mach-imx/mach-imx6sl.o: In function `imx6sl_init_late': mach-imx6sl.c:(.init.text+0x14): undefined reference to `imx6sl_cpuidle_init' This adds the missing line to the Makefile to also build the cpuidle support that we need here. Fixes: dee5dee2a5b2 ("ARM: imx: Add basic msl support for imx6sll") Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as wellArnd Bergmann1-1/+1
The cpuidle support calls cpu_suspend(), which is compiled conditionally, and fails to link unless something selects CONFIG_ARM_CPU_SUSPEND. arch/arm/mach-imx/cpuidle-imx6sx.o: In function `imx6sx_enter_wait': cpuidle-imx6sx.c:(.text+0x6c): undefined reference to `cpu_suspend' This adds an explicit select statement here. Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26ARM: mxs_defconfig: Re-sync defconfigFabio Estevam1-10/+4
Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig So keep it in sync to help further changes in defconfig. The explanation for removing the Kconfig symbols: CONFIG_FHANDLE=y: verified that it is still selected selected CONFIG_DEVPTS_MULTIPLE_INSTANCES=y: does not exist anymore CONFIG_NVMEM=y: verified that it is still selected CONFIG_LOCKUP_DETECTOR=y: need to select CONFIG_SOFTLOCKUP_DETECTOR now CONFIG_TIMER_STATS=y: does not exist anymore Boot tested on a imx28evk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-26ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driverFabio Estevam1-1/+2
fsl-asoc-card machine driver also supports sgtl5000, so use it favor of the imx-sgtl5000 machine driver, which will be probably be removed in the future. Tested on a imx25-pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-26ARM: imx_v4_v5_defconfig: Re-sync defconfigFabio Estevam1-5/+1
Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig So keep it in sync to help further changes in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-23arm64: defconfig: enable stmmac ethernet to defconfigDinh Nguyen1-1/+6
This patch enables the CONFIG_STMMAC_ETH to the default arm64 defconfig: -CONFIG_STMMAC_ETH=m +CONFIG_STMMAC_ETH=y +CONFIG_DWMAC_IPQ806X=m +CONFIG_DWMAC_MESON=m +CONFIG_DWMAC_ROCKCHIP=m +CONFIG_DWMAC_SUNXI=m +CONFIG_DWMAC_SUN8I=m The STMMAC ethernet controller is on the Stratix10 platform, and thus needs driver to be in the kernel image for NFS to work. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-03-20ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modulesTony Lindgren1-0/+9
We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Add UINPUTTony Lindgren1-0/+1
This can be used for keyboard fn keys with funkeymonkey. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Enable MDM6600 USB PHYTony Lindgren1-0/+1
This allows droid 4 USB modem to work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARDTony Lindgren1-0/+2
This is needed for audio on droid 4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Enable PWM_VIBRATony Lindgren1-0/+1
We can use PWM_VIBRA on many phones like droid 4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: defconfig: Configure Versatile boards to use PL111 DRMLinus Walleij1-4/+9
The DRM driver is now finalized for the Versatile board family, so switch the defconfig to use this driver instead of the old fbdev driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-20ARM: defconfig: Update Versatile defconfigLinus Walleij1-3/+2
This updates the Versatile defconfig to the latest savedefconfig results reflecting changes in Kconfig. We add in the Flash memory support that has been available upstream for a while now. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-20ARM: defconfig: Switch RealView boards to use P111 DRMLinus Walleij1-3/+7
The DRM driver is now finalized for the RealView board family, so switch the defconfig to use this driver instead of the old fbdev driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-20ARM: defconfig: Update RealView defconfigLinus Walleij1-8/+3
Just update with some new results from savedefconfig so we are in sync with what has happened in Kconfig upstream. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>