| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to help modprobe load architecture specific modules so we don't
fall back to generic software implementations, this should help
performance when building as a module.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When bch2_fs_alloc() gets an error before calling
bch2_fs_btree_iter_init(), bch2_fs_btree_iter_exit() makes an invalid
memory access because btree_trans_list is uninitialized.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Fixes: 6bd68ec266ad ("bcachefs: Heap allocate btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The ->encode_fh method is responsible for setting amount of space
required for storing the file handle if not enough space was provided.
bch2_encode_fh() was not setting required length in that case which
breaks e.g. fanotify. Fix it.
Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
On trylock failure we were waiting for outstanding reads to complete -
but nocow locks need to be held until the whole move is finished.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since outstanding journal buffers hold a journal pin, when flushing all
pins we need to close the current journal entry if necessary so its pin
can be released.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We could delete directories transactionally on rmdir()/unlink(), but we
don't; instead, like with regular files we wait for the VFS to call
evict().
That means that our check for directories in the deleted inodes btree is
wrong - the check should be for non-empty directories.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug where rebalance would loop repeatedly on the same
extents.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The internal freeze mechanism in bcachefs mostly reuses the generic
rw<->ro transition code. If the fs happens to shutdown during or
after freeze, a transition back to rw can fail. This is expected,
but returning an error from the unfreeze callout prevents the
filesystem from being unfrozen.
Skip the read write transition if the fs is shutdown. This allows
the fs to unfreeze at the vfs level so writes will no longer block,
but will still fail due to the emergency read-only state of the fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When creating a snapshot without specifying the source subvolume, we use
the subvolume containing the new snapshot.
Previously, this worked if the directory containing the new snapshot was
the subvolume root - but we were using the incorrect helper, and got a
subvolume ID of 0 when the parent directory wasn't the root of the
subvolume, causing an emergency read-only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a transaction path overflow reported in the snapshot deletion
path, when moving extents to the correct snapshot.
The root of the issue is that creating/deleting a reflink pointer can
generate an unbounded number of updates, if it is allowed to reference
an unbounded number of indirect extents; to prevent this, merging of
reflink pointers has been disabled.
But there's a hole, which is that copygc/rebalance may fragment existing
extents in the course of moving them around, and if an indirect extent
becomes too fragmented we'll then become unable to delete the reflink
pointer.
The eventual solution is going to be to tweak trigger handling so that
we can process large reflink pointers incrementally when necessary, and
notice that trigger updates don't need to be run for the part of the
reflink pointer not changing. That is going to be a bigger project
though, for another patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
for_each_btree_key2() runs each loop iteration in a btree transaction,
and thus does not cause SRCU lock hold time problems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Also, make bch2_extent_drop_ptrs() safer, so it works with extents and
non-extents iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recently, journal pre-reservations were removed. They were for reserving
space ahead of time in the journal for operations that are required for
journal reclaim, e.g. btree key cache flushing and interior node btree
updates.
Instead we have watermarks - only operations for journal reclaim are
allowed when the journal is low on space, and in general we're quite
good about doing operations in the order that will free up space in the
journal quickest when we're low on space. If we're doing a journal
reclaim operation out of order, we usually do it in nonblocking mode if
it's not freeing up space at the end of the journal.
There's an exceptino though - interior btree node update operations have
to be BCH_WATERMARK_reclaim - once they've been started, and they can't
be nonblocking. Generally this is fine because they'll only be a very
small fraction of transaction commits - but there's an exception, which
is during journal replay.
Journal replay does many btree operations, but doesn't need to commit
them to the journal since they're already in the journal. So killing off
of pre-reservation, plus another change to make journal replay more
efficient by initially doing the replay in sorted btree order, made it
possible for the interior update operations replay generates to fill and
deadlock the journal.
Fix this by introducing a new check on journal space at the _start_ of
an interior update operation. This causes us to block if necessary in
exactly the same way as we used to when interior updates took a journal
pre-reservaiton, but without all the expensive accounting
pre-reservations required.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The keys being replayed by journal replay have to be synchronized with
updates by other threads that overwrite them. We rely on btree node
locks for synchronizing - but since btree write buffer updates take no
btree locks, that won't work.
Instead, simply disable using the btree write buffer until journal
replay is finished.
This fixes a rare backpointers error in the merge_torture_flakey test.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's no need to drop journal pins in our exit paths - the code was
trying to have everything cleaned up on any shutdown, but better to just
tweak the assertions a bit.
This fixes a bug where calling into journal reclaim in the exit path
would cass a null ptr deref.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Request queue quiesce may interrupt flush sequence, and the original request
may have been marked as COMPLETE, but can't get finished because of
queue quiesce.
This way is fine from driver viewpoint, because flush sequence is block
layer concept, and it isn't related with driver.
However, driver(such as dm-rq) can call blk_mq_queue_inflight() to count &
drain inflight requests, then the wait & drain never gets done because
the completed & not-finished flush request is counted as inflight.
Fix this issue by not counting completed flush data request as inflight in
case of quiesce.
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: David Jeffery <djeffery@redhat.com>
Cc: John Pittman <jpittman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231201085605.577730-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The variable phys is defined as (struct resource *) which aligns with
the printk format specifier %pr. Taking the address of it results in a
value of type (struct resource **) which is incompatible with the format
specifier %pr. Therefore, remove the address of operator (&).
Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20231108062226.928985-1-danielmentz@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().
NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.
Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/
Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241808.rv9ceuAh-lkp@intel.com/
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.
The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.
I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.
Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
objpool overrun stress with test_objpool on OrangePi5+ SBC triggered the
following kernel warnings:
WARNING: CPU: 6 PID: 3115 at lib/objpool.c:168 objpool_push+0xc0/0x100
This message is from objpool.c:168:
WARN_ON_ONCE(tail - head > pool->nr_objs);
The overrun test case is to validate the case that pre-allocated objects
are insufficient: 8 objects are pre-allocated for each node and consumer
thread per node tries to grab 16 objects in a row. The testing system is
OrangePI 5+, with RK3588, a big.LITTLE SOC with 4x A76 and 4x A55. When
disabling either all 4 big or 4 little cores, the overrun tests run well,
and once with big and little cores mixed together, the overrun test would
always cause an overrun loop. It's likely the memory timing differences
of big and little cores cause this trouble. Here are the debugging data
of objpool_try_get_slot after try_cmpxchg_release:
objpool_pop: cpu: 4/0 0:0 head: 278/279 tail:278 last:276/278
The local copies of 'head' and 'last' were 278 and 276, and reloading of
'slot->head' and 'slot->last' got 279 and 278. After try_cmpxchg_release
'slot->head' became 'head + 1', which is correct. But what's wrong here
is the stale value of 'last', and that stale value of 'last' finally led
the overrun of 'head'.
Memory updating of 'last' and 'head' are performed in push() and pop()
independently, which could be the culprit leading this out of order
visibility of 'last' and 'head'. So for objpool_try_get_slot(), it's
not enough only checking the condition of 'head != slot', the implicit
condition 'last - head <= nr_objs' must also be explicitly asserted to
guarantee 'last' is always behind 'head' before the object retrieving.
This patch will check and try reloading of 'head' and 'last' to ensure
'last' is behind 'head' at the time of object retrieving. Performance
testings show the average impact is about 0.1% for X86_64 and 1.12% for
ARM64. Here are the results:
OS: Debian 10 X86_64, Linux 6.6rc
HW: XEON 8336C x 2, 64 cores/128 threads, DDR4 3200MT/s
1T 2T 4T 8T 16T
native: 49543304 99277826 199017659 399070324 795185848
objpool: 29909085 59865637 119692073 239750369 478005250
objpool+: 29879313 59230743 119609856 239067773 478509029
32T 48T 64T 96T 128T
native: 1596927073 2390099988 2929397330 3183875848 3257546602
objpool: 957553042 1435814086 1680872925 2043126796 2165424198
objpool+: 956476281 1434491297 1666055740 2041556569 2157415622
OS: Debian 11 AARCH64, Linux 6.6rc
HW: Kunpeng-920 96 cores/2 sockets/4 NUMA nodes, DDR4 2933 MT/s
1T 2T 4T 8T 16T
native: 30890508 60399915 123111980 242257008 494002946
objpool: 14742531 28883047 57739948 115886644 232455421
objpool+: 14107220 29032998 57286084 113730493 232232850
24T 32T 48T 64T 96T
native: 746406039 1000174750 1493236240 1998318364 2942911180
objpool: 349164852 467284332 702296756 934459713 1387898285
objpool+: 348388180 462750976 696606096 927865887 1368402195
Link: https://lore.kernel.org/all/20231114115148.298821-1-wuqiang.matt@bytedance.com/
Fixes: b4edb8d2d464 ("lib: objpool added: ring-array based lockless MPMC")
Signed-off-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3.
These helper functions are needed for KFD to export and import DMABufs
the right way without duplicating the tracking of DMABufs associated with
GEM objects while ensuring that move notifier callbacks are working as
intended.
CC: Christian König <christian.koenig@amd.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 42c5a3b04bf6 refactored the KPTI init code in a way that results
in the use of non-global kernel mappings even on systems that have no
need for it, and even when KPTI has been disabled explicitly via the
command line.
Ensure that this only happens when we have decided (based on the
detected system-wide CPU features) that KPTI should be enabled.
Fixes: 42c5a3b04bf6 ("arm64: Split kpti_install_ng_mappings()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231127120049.2258650-6-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Drop the vfio_file_iommu_group() stub and instead unconditionally declare
the function to fudge around a KVM wart where KVM tries to do symbol_get()
on vfio_file_iommu_group() (and other VFIO symbols) even if CONFIG_VFIO=n.
Ensuring the symbol is always declared fixes a PPC build error when
modules are also disabled, in which case symbol_get() simply points at the
address of the symbol (with some attributes shenanigans). Because KVM
does symbol_get() instead of directly depending on VFIO, the lack of a
fully defined symbol is not problematic (ugly, but "fine").
arch/powerpc/kvm/../../../virt/kvm/vfio.c:89:7:
error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
fn = symbol_get(vfio_file_iommu_group);
^
include/linux/module.h:805:60: note: expanded from macro 'symbol_get'
#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); })
^
include/linux/vfio.h:294:35: note: previous definition is here
static inline struct iommu_group *vfio_file_iommu_group(struct file *file)
^
arch/powerpc/kvm/../../../virt/kvm/vfio.c:89:7:
error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
fn = symbol_get(vfio_file_iommu_group);
^
include/linux/module.h:805:65: note: expanded from macro 'symbol_get'
#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); })
^
include/linux/vfio.h:294:35: note: previous definition is here
static inline struct iommu_group *vfio_file_iommu_group(struct file *file)
^
2 errors generated.
Although KVM is firmly in the wrong (there is zero reason for KVM to build
virt/kvm/vfio.c when VFIO is disabled), fudge around the error in VFIO as
the stub is unnecessary and doesn't serve its intended purpose (KVM is the
only external user of vfio_file_iommu_group()), and there is an in-flight
series to clean up the entire KVM<->VFIO interaction, i.e. fixing this in
KVM would result in more churn in the long run, and the stub needs to go
away regardless.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308251949.5IiaV0sz-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202309030741.82aLACDG-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202309110914.QLH0LU6L-lkp@intel.com
Link: https://lore.kernel.org/all/0-v1-08396538817d+13c5-vfio_kvm_kconfig_jgg@nvidia.com
Link: https://lore.kernel.org/all/20230916003118.2540661-1-seanjc@google.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: c1cce6d079b8 ("vfio: Compile vfio_group infrastructure optionally")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231130001000.543240-1-seanjc@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
When compiling with gcc version 14.0.0 20231126 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/smb2pdu.c:18:
In function 'fortify_memcpy_chk',
inlined from '__SMB2_close' at fs/smb/client/smb2pdu.c:3480:4:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/cifssmb.c:17:
In function 'fortify_memcpy_chk',
inlined from 'CIFS_open' at fs/smb/client/cifssmb.c:1248:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the fortification logic inteprets calls to 'memcpy()' as an
attempts to copy an amount of data which exceeds the size of the specified
field (i.e. more than 8 bytes from __le64 value) and thus issues an overread
warning. Both of these warnings may be silenced by using the convenient
'struct_group()' quirk.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It's been reported that the runtime PM on KONTRON SinglePC (PCI SSID
1734:1232) caused a stall of playback after a bunch of invocations.
(FWIW, this looks like an timing issue, and the stall happens rather
on the controller side.)
As a workaround, disable the default power-save on this platform.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231130151321.9813-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:
$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
echo 11c30000.ethernet > bind; done
It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:
1/ as a result of bind success the user space open/configures the
interfaces tough an IOCTL; the following stack trace has been
identified on RZ/G3S:
Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198
2/ this call may execute concurrently with ravb_remove() as the
unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
while the above ravb_open() is in progress it may lead to MAC
(or PHY, or MAC-PHY connection, the right point hasn't been identified
at the moment) to be broken, thus the Ethernet connectivity fails to
restore.
The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.
To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:
int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
// ...
rtnl_lock();
ret = -ENODEV;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (!dev)
goto done;
// ...
done:
rtnl_unlock();
out:
return ret;
}
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().
Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".
The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.
Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.
Take into account these indication.
Fixes: 1089877ada8d ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.
Along with it, the free_netdev() call from the error path was moved after
reset_control_assert() on its own label (out_free_netdev) to free
netdev in case reset_control_deassert() fails.
Fixes: 0d13a1a464a0 ("ravb: Add reset support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the
calling of pci_msix_shutdown(), wx->msix_entries is never freed.
Reordering the lines to fix the memory leak.
Cc: stable@vger.kernel.org
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an error when an interface has the following conditions:
- PF is in an aggregate (bond)
- PF has VFs created on it
- bond is in a state where it is failed-over to the secondary interface
- A VF reset is issued on one or more of those VFs
The issue is generated by the originating PF trying to rebuild or
reconfigure the VF resources. Since the bond is failed over to the
secondary interface the queue contexts are in a modified state.
To fix this issue, have the originating interface reclaim its resources
prior to the tear-down and rebuild or reconfigure. Then after the process
is complete, move the resources back to the currently active interface.
There are multiple paths that can be used depending on what triggered the
event, so create a helper function to move the queues and use paired calls
to the helper (back to origin, process, then move back to active interface)
under the same lag_mutex lock.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the cifs filesystem implementations of FALLOC_FL_INSERT_RANGE, in
smb3_insert_range(), to set i_size after extending the file on the server
and before we do the copy to open the gap (as we don't clean up the EOF
marker if the copy fails).
Fixes: 7fe6fe95b936 ("cifs: add FALLOC_FL_INSERT_RANGE support")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix the cifs filesystem implementations of FALLOC_FL_ZERO_RANGE, in
smb3_zero_range(), to set i_size after extending the file on the server.
Fixes: 72c419d9b073 ("cifs: fix smb3_zero_range so it can expand the file-size when required")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If device_register() fails, the refcount of device is not 0, the name
allocated in dev_set_name() is leaked. To fix this by calling put_device(),
so that it will be freed in callback function kobject_cleanup().
unreferenced object 0xffff9d99035c7a90 (size 8):
comm "systemd-udevd", pid 168, jiffies 4294672386 (age 152.089s)
hex dump (first 8 bytes):
66 77 30 2e 30 00 ff ff fw0.0...
backtrace:
[<00000000e1d62bac>] __kmem_cache_alloc_node+0x1e9/0x360
[<00000000bbeaff31>] __kmalloc_node_track_caller+0x44/0x1a0
[<00000000491f2fb4>] kvasprintf+0x67/0xd0
[<000000005b960ddc>] kobject_set_name_vargs+0x1e/0x90
[<00000000427ac591>] dev_set_name+0x4e/0x70
[<000000003b4e447d>] create_units+0xc5/0x110
fw_unit_release() will be called in the error path, move fw_device_get()
before calling device_register() to keep balanced with fw_device_put() in
fw_unit_release().
Cc: stable@vger.kernel.org
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Fixes: a1f64819fe9f ("firewire: struct device - replace bus_id with dev_name(), dev_set_name()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This adds a test where both pairs of a af_unix paired socket are put into a
BPF map. This ensures that when we tear down the af_unix pair we don't have
any issues on sockmap side with ordering and reference counting.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com
|
|
AF_UNIX stream sockets are a paired socket. So sending on one of the pairs
will lookup the paired socket as part of the send operation. It is possible
however to put just one of the pairs in a BPF map. This currently increments
the refcnt on the sock in the sockmap to ensure it is not free'd by the
stack before sockmap cleans up its state and stops any skbs being sent/recv'd
to that socket.
But we missed a case. If the peer socket is closed it will be free'd by the
stack. However, the paired socket can still be referenced from BPF sockmap
side because we hold a reference there. Then if we are sending traffic through
BPF sockmap to that socket it will try to dereference the free'd pair in its
send logic creating a use after free. And following splat:
[59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0
[59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954
[...]
[59.905468] Call Trace:
[59.905787] <TASK>
[59.906066] dump_stack_lvl+0x130/0x1d0
[59.908877] print_report+0x16f/0x740
[59.910629] kasan_report+0x118/0x160
[59.912576] sk_wake_async+0x31/0x1b0
[59.913554] sock_def_readable+0x156/0x2a0
[59.914060] unix_stream_sendmsg+0x3f9/0x12a0
[59.916398] sock_sendmsg+0x20e/0x250
[59.916854] skb_send_sock+0x236/0xac0
[59.920527] sk_psock_backlog+0x287/0xaa0
To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its
paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The
primarily problem with keeping this logic in bpf_unix was: In the sock close()
we could handle the deref by having a close handler. But, when we are destroying
the psock through a map delete operation we wouldn't have gotten any signal
thorugh the proto struct other than it being replaced. If we do the deref from
the proto replace its too early because we need to deref the sk_pair after the
backlog worker has been stopped.
Given all this it seems best to just cache it at the end of the psock and eat 8B
for the af_unix and vsock users. Notice dgram sockets are OK because they handle
locking already.
Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com
|
|
The legacy region at 0x7F000 maps to valid registers in GC 9.4.3 SOCs.
Use 0x1A000 offset instead as MMIO register remap region.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
A number of DML parameters related to HostVM were either missing or
being set incorrectly, which may cause inaccuracies in calculating
margins and determining BW limitations.
[How]
Correct these values where needed and populate the missing values.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Memory leaks of gang_ctx_bo and wptr_bo.
[How]
Free gang_ctx_bo and wptr_bo in pqm_uninit.
v2: add a common function pqm_clean_queue_resource to
free queue's resources.
v3: reset pdd->pqd.num_gws when destorying GWS queue.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check smu v13_0_0 SKU type to select EEPROM I2C address.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
[Why]
DTBCLK is enabled on idle and it will burn power.
[How]
There's a few issues here:
- Always enabling DTBCLK on clock manager init
- Setting refclk when DTBCLK is supposed to be disabled
- Not applying the correct calculated version refclk, but instead the
base value which might be zero
On dtbclk_en change we'll message PMFW to enable or disable the clock
accordingly.
The DTBDTO will be then based on refclk, but it will be set to the
default fixed value if there was nothing calculated in DML despite the
clock being considered enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init
'didt_rreg' and 'didt_wreg' to 'NULL'. But in func
'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT'
lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use
these two definitions won't be added for 'AMDGPU_FAMILY_SI'.
So, add null pointer judgment before calling.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When dGPU is put into BOCO it may be in D3cold but still able send
PME on display hotplug event. For this to work it must be enabled
as wake source from D3.
When runpm is enabled use pci_wake_from_d3() to mark wakeup as
enabled by default.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Kent Overstreet
Daniel Hill
Thomas Bertschinger
Jan Kara
Brian Foster
Linus Torvalds
Keith Busch
Ming Lei
Daniel Mentz
Masami Hiramatsu (Google)
JP Kobryn
wuqiang.matt
Felix Kuehling
Ard Biesheuvel
Sean Christopherson
Dmitry Antipov
Takashi Iwai
Claudiu Beznea
Jiawen Wu
Dave Ertman
David Howells
Yang Yingliang
John Fastabend
Lijo Lazar
Taimur Hassan
ZhenGuo Yin
Candice Li
Nicholas Kazlauskas
Lu Yao
Mario Limonciello