aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2024-10-21ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593José Relvas1-0/+10
The Acer Predator G9-593 has a 2+1 speaker system which isn't probed correctly. This patch adds a quirk with the proper pin connections. Note that I do not own this laptop, so I cannot guarantee that this fixes the issue. Testing was done by other users here: https://discussion.fedoraproject.org/t/-/118482 This model appears to have two different dev IDs... - 0x1177 (as seen on the forum link above) - 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f) I don't think the audio system was changed between model revisions, so the patch applies for both IDs. Signed-off-by: José Relvas <josemonsantorelvas@gmail.com> Link: https://patch.msgid.link/20241020102756.225258-1-josemonsantorelvas@gmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-21ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()Andrey Shumilin1-0/+3
The step variable is initialized to zero. It is changed in the loop, but if it's not changed it will remain zero. Add a variable check before the division. The observed behavior was introduced by commit 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"), and it is difficult to show that any of the interval parameters will satisfy the snd_interval_test() condition with data from the amdtp_rate_table[] table. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size") Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://patch.msgid.link/20241018060018.1189537-1-shum.sdl@nppct.ru Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-16ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2Vasiliy Kovalev1-1/+1
The cached version avoids redundant commands to the codec, improving stability and reducing unnecessary operations. This change ensures better power management and reliable restoration of pin configurations, especially after hibernation (S4) and other power transitions. Fixes: 9988844c457f ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2") Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-15ALSA/hda: intel-sdw-acpi: add support for sdw-manager-list property readPierre-Louis Bossart2-9/+18
The DisCo for SoundWire 2.0 spec adds support for a new sdw-manager-list property. Add it in backwards-compatible mode with 'sdw-master-count', which assumed that all links between 0..count-1 exist. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241001070611.63288-5-yung-chuan.liao@linux.intel.com
2024-10-15ALSA/hda: intel-sdw-acpi: simplify sdw-master-count property readPierre-Louis Bossart1-2/+3
For some reason we used an array of one u8 when the specification requires a u32. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241001070611.63288-4-yung-chuan.liao@linux.intel.com
2024-10-15ALSA/hda: intel-sdw-acpi: fetch fwnode once in sdw_intel_scan_controller()Pierre-Louis Bossart1-3/+5
Optimize a bit by using an intermediate 'fwnode' variable. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241001070611.63288-3-yung-chuan.liao@linux.intel.com
2024-10-15ALSA/hda: intel-sdw-acpi: cleanup sdw_intel_scan_controllerPierre-Louis Bossart1-2/+1
Remove unnecessary initialization and un-shadow return code. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241001070611.63288-2-yung-chuan.liao@linux.intel.com
2024-10-14ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projectsBaojun Xu1-0/+29
Add new vendor_id and subsystem_id in quirk for Lenovo, ASUS, and Dell projects. Signed-off-by: Baojun Xu <baojun.xu@ti.com> Link: https://patch.msgid.link/20241011074040.524-1-baojun.xu@ti.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-11ALSA: scarlett2: Add error check after retrieving PEQ filter valuesZhu Jun1-0/+2
Add error check after retrieving PEQ filter values in scarlett2_update_filter_values that ensure function returns error if PEQ filter value retrieval fails. Fixes: b64678eb4e70 ("ALSA: scarlett2: Add DSP controls") Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241009092305.8570-1-zhujun2@cmss.chinamobile.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-11ALSA: hda/cs8409: Fix possible NULL dereferenceMurad Masimov1-2/+3
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then NULL pointer dereference will occur in the next line. Since dolphin_fixups function is a hda_fixup function which is not supposed to return any errors, add simple check before dereference, ignore the fail. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 20e507724113 ("ALSA: hda/cs8409: Add support for dolphin") Signed-off-by: Murad Masimov <m.masimov@maxima.ru> Link: https://patch.msgid.link/20241010221649.1305-1-m.masimov@maxima.ru Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-10sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UMLJulian Vetter1-1/+1
When building for the UM arch and neither INDIRECT_IOMEM=y, nor HAS_IOMEM=y is selected, it will fall back to the implementations from asm-generic/io.h for IO memcpy. But these fall-back functions just do a memcpy. So, instead of depending on UML, add dependency on 'HAS_IOMEM || INDIRECT_IOMEM'. Reviewed-by: Yann Sionneau <ysionneau@kalrayinc.com> Signed-off-by: Julian Vetter <jvetter@kalrayinc.com> Link: https://patch.msgid.link/20241010124601.700528-1-jvetter@kalrayinc.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-10ALSA: line6: update contact informationMarkus Grabner15-16/+16
The Line6 driver source code files contain an outdated email address of the original author. This patch updates the contact information. Signed-off-by: Markus Grabner <line6@grabner-graz.at> Link: https://patch.msgid.link/20241009194251.15662-1-line6@grabner-graz.at Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-10ALSA: usb-audio: Fix NULL pointer deref in snd_usb_power_domain_set()Karol Kosik1-0/+1
Commit adding support for multiple control interfaces expanded struct snd_usb_power_domain with pointer to control interface for proper control message routing but missed one initialization point of this structure, which has left new field with NULL value. Standard mandates that each device has at least one control interface and code responsible for power domain does not check for NULL values when querying for control interface. This caused some USB devices to crash the kernel. Fixes: 6aa8700150f7 ("ALSA: usb-audio: Support multiple control interfaces") Signed-off-by: Karol Kosik <k.kosik@outlook.com> Link: https://patch.msgid.link/AS8P190MB1285B563C6B5394DB274813FEC782@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-09ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2Vasiliy Kovalev1-0/+19
There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on. However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d: working conf. (windows): Pin-ctls: 0x80: HP not working (linux): Pin-ctls: 0xc0: OUT HP This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem. Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-08ALSA: hda: Sound support for HP Spectre x360 16 inch model 2024christoph.plattner1-1/+49
Included solution with ALC287/CS35L41 did not cover full function, 14 inch code blocked. Forcing output for treble/bass speaker to connection 0x02, setting pin configs for LEDs and re-powering amp and calling fixups for cs35l41, mute and gpio leds was a working combination to reach correct behaviour. Signed-off-by: christoph.plattner <christoph.plattner@gmx.at> Link: https://patch.msgid.link/20241005173509.1196001-1-christoph.plattner@gmx.at Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-06Linux 6.12-rc2Linus Torvalds1-1/+1
2024-10-07kbuild: deb-pkg: Remove blank first line from maint scriptsAaron Thompson1-1/+0
The blank line causes execve() to fail: # strace ./postinst execve("./postinst", ...) = -1 ENOEXEC (Exec format error) strace: exec: Exec format error +++ exited with 1 +++ However running the scripts via shell does work (at least with bash) because the shell attempts to execute the file as a shell script when execve() fails. Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions") Signed-off-by: Aaron Thompson <dev@aaront.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-10-07kbuild: fix a typo dt_binding_schema -> dt_binding_schemasXu Yang1-1/+1
If we follow "make help" to "make dt_binding_schema", we will see below error: $ make dt_binding_schema make[1]: *** No rule to make target 'dt_binding_schema'. Stop. make: *** [Makefile:224: __sub-make] Error 2 It should be a typo. So this will fix it. Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json") Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Nicolas Schier <n.schier@avm.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-10-07scripts: import more list macrosSami Tolvanen1-0/+50
Import list_is_first, list_is_last, list_replace, and list_replace_init. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-10-06platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errorsHans de Goede1-2/+4
x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs") Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()") Cc: stable@vger.kernel.org Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
2024-10-06platform/x86: wmi: Update WMI driver API documentationArmin Wolf1-6/+5
The WMI driver core now passes the WMI event data to legacy notify handlers, so WMI devices sharing notification IDs are now being handled properly. Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86: dell-ddv: Fix typo in documentationAnaswara T Rajan1-2/+2
Fix typo in word 'diagnostics' in documentation. Signed-off-by: Anaswara T Rajan <anaswaratrajan@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241005070056.16326-1-anaswaratrajan@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86: dell-sysman: add support for alienware productsCrag Wang1-0/+1
Alienware supports firmware-attributes and has its own OEM string. Signed-off-by: Crag Wang <crag_wang@dell.com> Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86/intel: power-domains: Add Diamond Rapids supportSrinivas Pandruvada1-0/+1
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to tpmi_cpu_ids to support domaid id mappings. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20241003215554.3013807-3-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86: ISST: Add Diamond Rapids to support listSrinivas Pandruvada1-0/+1
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to SST support list by adding to isst_cpu_ids. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20241003215554.3013807-2-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby LakeHans de Goede1-2/+0
There have been multiple reports that the ACPI PM Timer disabling is causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3, hibernate) methods. Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to fix the hang on suspend. Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/ Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346 Cc: Marek Maslanka <mmaslanka@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Todd Brandt <todd.e.brandt@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
2024-10-06platform/x86: dell-laptop: Do not fail when encountering unsupported batteriesArmin Wolf1-3/+12
If the battery hook encounters a unsupported battery, it will return an error. This in turn will cause the battery driver to automatically unregister the battery hook. On machines with multiple batteries however, this will prevent the battery hook from handling the primary battery, since it will always get unregistered upon encountering one of the unsupported batteries. Fix this by simply ignoring unsupported batteries. Reviewed-by: Pali Rohár <pali@kernel.org> Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06MAINTAINERS: Update Intel In Field Scan(IFS) entryJithu Joseph1-1/+1
Ashok is no longer with Intel and his e-mail address will start bouncing soon. Update his email address to the new one he provided to ensure correct contact details in the MAINTAINERS file. Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-06x86/reboot: emergency callbacks are now registered by common KVM codePaolo Bonzini2-4/+4
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules. In practice this has no functional change, because CONFIG_KVM_X86_COMMON is set if and only if at least one vendor-specific module is being built. However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that are used in kvm.ko. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-06KVM: x86: leave kvm.ko out of the build if no vendor module is requestedPaolo Bonzini2-4/+7
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko. It provides no functionality on its own and it is unnecessary unless one of the vendor-specific module is compiled. In particular, /dev/kvm is not created until one of kvm-intel.ko or kvm-amd.ko is loaded. Use CONFIG_KVM to decide if it is built-in or a module, but use the vendor-specific modules for the actual decision on whether to build it. This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD are both disabled. The cpu_emergency_register_virt_callback() function is called from kvm.ko, but it is only defined if at least one of CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided. Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-05platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bugZach Wade1-1/+3
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: kasan: bad access detected [ 19.505058] [ 19.505970] Memory state around the buggy address: [ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510014] ^ [ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.515367] ================================================================== The reason for this error is physical_package_ids assigned by VMware VMM are not continuous and have gaps. This will cause value returned by topology_physical_package_id() to be more than topology_max_packages(). Here the allocation uses topology_max_packages(). The call to topology_max_packages() returns maximum logical package ID not physical ID. Hence use topology_logical_package_id() instead of topology_physical_package_id(). Fixes: 9a1aac8a96dc ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: stable@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zach Wade <zachwade.k@gmail.com> Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-10-04bcachefs: Rework logged op error handlingKent Overstreet3-28/+53
Initially it was thought that we just wanted to ignore errors from logged op replay, but it turns out we do need to catch -EROFS, or we'll go into an infinite loop. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Add warn param to subvol_get_snapshot, peek_inodeKent Overstreet4-28/+43
These shouldn't always be fatal errors - logged op resume, in particular, and we want it as a parameter there. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Kill snapshot arg to fsck_write_inode()Kent Overstreet4-55/+51
It was initially believed that it would be better to be explicit about the snapshot we're updating when writing inodes in fsck; however, it turns out that passing around the snapshot separately is more error prone and we're usually updating the inode in the same snapshow we read it from. This is different from normal filesystem paths, where we do the update in the snapshot of the subvolume we're in. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Check for unlinked, non-empty dirs in check_inode()Kent Overstreet2-1/+19
We want to check for this early so it can be reattached if necessary in check_unreachable_inodes(); better than letting it be deleted and having the children reattached, losing their filenames. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Check for unlinked inodes with direntsKent Overstreet2-15/+41
link count works differently in bcachefs - it's only nonzero for files with multiple hardlinks, which means we can also avoid checking it except for files that are known to have hardlinks. That means we need a few different checks instead; in particular, we don't want fsck to delet a file that has a dirent pointing to it. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Check for directories with no backpointersKent Overstreet2-8/+17
It's legal for regular files to have missing backpointers (due to hardlinks), and fsck should automatically add them, but for directories this is an error that should be flagged. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Kill alloc_v4.fragmentation_lruKent Overstreet7-22/+38
The fragmentation_lru field hasn't been needed since we reworked the LRU btrees to use the btree write buffer; previously it was used to resolve collisions, but the revised LRU btree uses the backpointer (the bucket) as part of the key. It should have been deleted at the time of the LRU rework; since it wasn't, that left places for bugs to hide, in check/repair. This fixes LRU fsck on a filesystem image helpfully provided by a user who disappeared before I could get his name for the reported-by. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: minor lru fsck fixesKent Overstreet1-12/+15
check_lru_key() wasn't using write buffer updates for deleting bad lru entries - dating from before the lru btree used the btree write buffer. And when possibly flushing the btree write buffer (to make sure we're seeing a real inconsistency), we need to be using the modern bch2_btree_write_buffer_maybe_flush(). Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Mark more errors AUTOFIXKent Overstreet1-12/+12
Errors are getting marked as AUTOFIX once they've been (re)-tested and audited. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Make sure we print error that causes fsck to bail outKent Overstreet1-3/+9
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: bkey errors are only AUTOFIX during readKent Overstreet2-8/+12
Newly generated keys, in the transaction commit path or write path, should not be AUTOFIX; those indicate bugs that we need to fail fast for. Fixes: 5612daafb764 ("bcachefs: Fix fsck warnings from bkey validation") Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Create lost+found in correct snapshotKent Overstreet1-1/+7
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Fix reattach_inode()Kent Overstreet1-6/+5
Ensure a copy of the lost+found inode exists in the snapshot that we're reattaching, so that we don't trigger warnings in lookup_inode_for_snapshot() later. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04bcachefs: Add missing wakeup to bch2_inode_hash_remove()Kent Overstreet1-12/+21
This fixes two different bugs: - Looser locking with the rhashtable means we need to recheck if the inode is still hashed after prepare_to_wait(), and add a corresponding wakeup after removing from the hash table. - da18ecbf0fb6 ("fs: add i_state helpers") changed the bit waitqueues used for inodes, and bcachefs wasn't updated and thus broke; this updates bcachefs to the new helper. Fixes: 112d21fd1a12 ("bcachefs: switch to rhashtable for vfs inodes hash") Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-04ext4: fix off by one issue in alloc_flex_gd()Baokun Li1-8/+10
Wesley reported an issue: ================================================================== EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks ------------[ cut here ]------------ kernel BUG at fs/ext4/resize.c:324! CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27 RIP: 0010:ext4_resize_fs+0x1212/0x12d0 Call Trace: __ext4_ioctl+0x4e0/0x1800 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0x99/0xd0 x64_sys_call+0x1206/0x20d0 do_syscall_64+0x72/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== While reviewing the patch, Honza found that when adjusting resize_bg in alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than flexbg_size. The reproduction of the problem requires the following: o_group = flexbg_size * 2 * n; o_size = (o_group + 1) * group_size; n_group: [o_group + flexbg_size, o_group + flexbg_size * 2) o_size = (n_group + 1) * group_size; Take n=0,flexbg_size=16 as an example: last:15 |o---------------|--------------n-| o_group:0 resize to n_group:30 The corresponding reproducer is: img=test.img rm -f $img truncate -s 600M $img mkfs.ext4 -F $img -b 1024 -G 16 8M dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 248M Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE() to prevent the issue from happening again. [ Note: another reproucer which this commit fixes is: img=test.img rm -f $img truncate -s 25MiB $img mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img truncate -s 3GiB $img dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 3G umount $dev losetup -d $dev -- TYT ] Reported-by: Wesley Hershberger <wesley.hershberger@canonical.com> Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2081231 Reported-by: Stéphane Graber <stgraber@stgraber.org> Closes: https://lore.kernel.org/all/20240925143325.518508-1-aleksandr.mikhalitsyn@canonical.com/ Tested-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Tested-by: Eric Sandeen <sandeen@redhat.com> Fixes: 665d3e0af4d3 ("ext4: reduce unnecessary memory allocation in alloc_flex_gd()") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240927133329.1015041-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2024-10-04ext4: mark fc as ineligible using an handle in ext4_xattr_set()Luis Henriques (SUSE)1-1/+2
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result in a fast-commit being done before the filesystem is effectively marked as ineligible. This patch moves the call to this function so that an handle can be used. If a transaction fails to start, then there's not point in trying to mark the filesystem as ineligible, and an error will eventually be returned to user-space. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240923104909.18342-3-luis.henriques@linux.dev Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2024-10-04ext4: use handle to mark fc as ineligible in __track_dentry_update()Luis Henriques (SUSE)1-8/+11
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result in a fast-commit being done before the filesystem is effectively marked as ineligible. This patch fixes the calls to this function in __track_dentry_update() by adding an extra parameter to the callback used in ext4_fc_track_template(). Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240923104909.18342-2-luis.henriques@linux.dev Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2024-10-04tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM supportPaul Moore11-577/+118
This patch reverts two TOMOYO patches that were merged into Linus' tree during the v6.12 merge window: 8b985bbfabbe ("tomoyo: allow building as a loadable LSM module") 268225a1de1a ("tomoyo: preparation step for building as a loadable LSM module") Together these two patches introduced the CONFIG_SECURITY_TOMOYO_LKM Kconfig build option which enabled a TOMOYO specific dynamic LSM loading mechanism (see the original commits for more details). Unfortunately, this approach was widely rejected by the LSM community as well as some members of the general kernel community. Objections included concerns over setting a bad precedent regarding individual LSMs managing their LSM callback registrations as well as general kernel symbol exporting practices. With little to no support for the CONFIG_SECURITY_TOMOYO_LKM approach outside of Tetsuo, and multiple objections, we need to revert these changes. Link: https://lore.kernel.org/all/0c4b443a-9c72-4800-97e8-a3816b6a9ae2@I-love.SAKURA.ne.jp Link: https://lore.kernel.org/all/CAHC9VhR=QjdoHG3wJgHFJkKYBg7vkQH2MpffgVzQ0tAByo_wRg@mail.gmail.com Acked-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-10-04arm64: Subscribe Microsoft Azure Cobalt 100 to erratum 3194386Easwar Hariharan2-0/+3
Add the Microsoft Azure Cobalt 100 CPU to the list of CPUs suffering from erratum 3194386 added in commit 75b3c43eab59 ("arm64: errata: Expand speculative SSBS workaround") CC: Mark Rutland <mark.rutland@arm.com> CC: James More <james.morse@arm.com> CC: Will Deacon <will@kernel.org> CC: stable@vger.kernel.org # 6.6+ Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Link: https://lore.kernel.org/r/20241003225239.321774-1-eahariha@linux.microsoft.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.