| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The new stricter limits validation doesn't like a max_append_sectors value
to be set without BLK_FEAT_ZONED. Set it before allocation the disk to
fix this instead of just inheriting it later.
Fixes: d690cb8ae14b ("block: add an API to atomically update queue limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
On some TUXEDO platforms, a Samsung 990 Evo NVMe leads to a high
power consumption in s2idle sleep (2-3 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a
sleep with a lower power consumption, typically around 0.5 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If a drive is unable to create IO queues on the initial probe, a
subsequent reset will need to allocate the tagset if IO queue creation
is successful. Without this, blk_mq_update_nr_hw_queues will crash on a
bad pointer due to the invalid tagset.
Fixes: eac3ef262941f62 ("nvme-pci: split the initial probe from the rest path")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe AER notification of a persistent internal error triggers a
reset. The existing warning message just says "due to AER", which can be
confused with the unrelated PCIe AER condition. Just say what the event
was instead of the generic overloaded acronym.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The sparse tool complains as follows:
drivers/nvme/target/debugfs.c:16:15: warning:
symbol 'nvmet_debugfs' was not declared. Should it be static?
This symbol is not used outside debugfs.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The "name" field in struct nvme_ctrl is unsued so removing it.
This would help save 12 bytes of space for each nvme_ctrl instance
created.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup")
moves starting keep-alive from nvme_start_ctrl() into
nvme_init_ctrl_finish(), but don't move stopping keep-alive into
nvme_uninit_ctrl(), so keep-alive work can be started and keep pending
after failing to start controller, finally use-after-free is triggered if
nvme host driver is unloaded.
This patch fixes kernel panic when running nvme/004 in case that connection
failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl().
This way is reasonable because keep-alive is now started in
nvme_init_ctrl_finish().
Fixes: 3af755a46881 ("nvme: move nvme_stop_keep_alive() back to original position")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Function bdev_get_queue() must not return NULL, so drop the check in
bdev_write_zeroes_sectors().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Link: https://lore.kernel.org/r/20240815163228.216051-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As reported in [0], we may get a hang when formatting a XFS FS on a RAID0
drive.
Commit 73a768d5f955 ("block: factor out a blk_write_zeroes_limit helper")
changed __blkdev_issue_write_zeroes() to read the max write zeroes
value in the loop. This is not safe as max write zeroes may change in
value. Specifically for the case of [0], the value goes to 0, and we get
an infinite loop.
Lift the limit reading out of the loop.
[0] https://lore.kernel.org/linux-xfs/4d31268f-310b-4220-88a2-e191c3932a82@oracle.com/T/#t
Fixes: 73a768d5f955 ("block: factor out a blk_write_zeroes_limit helper")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240815163228.216051-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Lockdep reported a warning in Linux version 6.6:
[ 414.344659] ================================
[ 414.345155] WARNING: inconsistent lock state
[ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted
[ 414.346221] --------------------------------
[ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes:
[ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[ 414.351204] {IN-SOFTIRQ-W} state was registered at:
[ 414.351751] lock_acquire+0x18d/0x460
[ 414.352218] _raw_spin_lock_irqsave+0x39/0x60
[ 414.352769] __wake_up_common_lock+0x22/0x60
[ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0
[ 414.353829] sbitmap_queue_clear+0xdd/0x270
[ 414.354338] blk_mq_put_tag+0xdf/0x170
[ 414.354807] __blk_mq_free_request+0x381/0x4d0
[ 414.355335] blk_mq_free_request+0x28b/0x3e0
[ 414.355847] __blk_mq_end_request+0x242/0xc30
[ 414.356367] scsi_end_request+0x2c1/0x830
[ 414.345155] WARNING: inconsistent lock state
[ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted
[ 414.346221] --------------------------------
[ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes:
[ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[ 414.351204] {IN-SOFTIRQ-W} state was registered at:
[ 414.351751] lock_acquire+0x18d/0x460
[ 414.352218] _raw_spin_lock_irqsave+0x39/0x60
[ 414.352769] __wake_up_common_lock+0x22/0x60
[ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0
[ 414.353829] sbitmap_queue_clear+0xdd/0x270
[ 414.354338] blk_mq_put_tag+0xdf/0x170
[ 414.354807] __blk_mq_free_request+0x381/0x4d0
[ 414.355335] blk_mq_free_request+0x28b/0x3e0
[ 414.355847] __blk_mq_end_request+0x242/0xc30
[ 414.356367] scsi_end_request+0x2c1/0x830
[ 414.356863] scsi_io_completion+0x177/0x1610
[ 414.357379] scsi_complete+0x12f/0x260
[ 414.357856] blk_complete_reqs+0xba/0xf0
[ 414.358338] __do_softirq+0x1b0/0x7a2
[ 414.358796] irq_exit_rcu+0x14b/0x1a0
[ 414.359262] sysvec_call_function_single+0xaf/0xc0
[ 414.359828] asm_sysvec_call_function_single+0x1a/0x20
[ 414.360426] default_idle+0x1e/0x30
[ 414.360873] default_idle_call+0x9b/0x1f0
[ 414.361390] do_idle+0x2d2/0x3e0
[ 414.361819] cpu_startup_entry+0x55/0x60
[ 414.362314] start_secondary+0x235/0x2b0
[ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b
[ 414.363413] irq event stamp: 428794
[ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200
[ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50
[ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2
[ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0
[ 414.367425]
other info that might help us debug this:
[ 414.368194] Possible unsafe locking scenario:
[ 414.368900] CPU0
[ 414.369225] ----
[ 414.369548] lock(&sbq->ws[i].wait);
[ 414.370000] <Interrupt>
[ 414.370342] lock(&sbq->ws[i].wait);
[ 414.370802]
*** DEADLOCK ***
[ 414.371569] 5 locks held by kworker/u10:3/1152:
[ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0
[ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0
[ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00
[ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0
[ 414.378607]
stack backtrace:
[ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6
[ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 414.381177] Workqueue: writeback wb_workfn (flush-253:0)
[ 414.381805] Call Trace:
[ 414.382136] <TASK>
[ 414.382429] dump_stack_lvl+0x91/0xf0
[ 414.382884] mark_lock_irq+0xb3b/0x1260
[ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10
[ 414.383889] ? stack_trace_save+0x8e/0xc0
[ 414.384373] ? __pfx_stack_trace_save+0x10/0x10
[ 414.384903] ? graph_lock+0xcf/0x410
[ 414.385350] ? save_trace+0x3d/0xc70
[ 414.385808] mark_lock.part.20+0x56d/0xa90
[ 414.386317] mark_held_locks+0xb0/0x110
[ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0
[ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50
[ 414.388422] trace_hardirqs_on+0x58/0x100
[ 414.388917] _raw_spin_unlock_irq+0x28/0x50
[ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0
[ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0
[ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0
[ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10
[ 414.392070] ? sbitmap_get+0x2b8/0x450
[ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0
[ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690
[ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420
[ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10
[ 414.394970] ? lock_acquire+0x18d/0x460
[ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00
[ 414.395986] ? __pfx_lock_acquire+0x10/0x10
[ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190
[ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00
[ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030
[ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10
[ 414.398897] ? writeback_sb_inodes+0x241/0xcc0
[ 414.399429] blk_mq_flush_plug_list+0x65/0x80
[ 414.399957] __blk_flush_plug+0x2f1/0x530
[ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10
[ 414.400999] blk_finish_plug+0x59/0xa0
[ 414.401467] wb_writeback+0x7cc/0x920
[ 414.401935] ? __pfx_wb_writeback+0x10/0x10
[ 414.402442] ? mark_held_locks+0xb0/0x110
[ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0
[ 414.404062] wb_workfn+0x2b3/0xcf0
[ 414.404500] ? __pfx_wb_workfn+0x10/0x10
[ 414.404989] process_scheduled_works+0x432/0x13f0
[ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10
[ 414.406139] ? do_raw_spin_lock+0x101/0x2a0
[ 414.406641] ? assign_work+0x19b/0x240
[ 414.407106] ? lock_is_held_type+0x9d/0x110
[ 414.407604] worker_thread+0x6f2/0x1160
[ 414.408075] ? __kthread_parkme+0x62/0x210
[ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0
[ 414.409168] ? __kthread_parkme+0x13c/0x210
[ 414.409678] ? __pfx_worker_thread+0x10/0x10
[ 414.410191] kthread+0x33c/0x440
[ 414.410602] ? __pfx_kthread+0x10/0x10
[ 414.411068] ret_from_fork+0x4d/0x80
[ 414.411526] ? __pfx_kthread+0x10/0x10
[ 414.411993] ret_from_fork_asm+0x1b/0x30
[ 414.412489] </TASK>
When interrupt is turned on while a lock holding by spin_lock_irq it
throws a warning because of potential deadlock.
blk_mq_prep_dispatch_rq
blk_mq_get_driver_tag
__blk_mq_get_driver_tag
__blk_mq_alloc_driver_tag
blk_mq_tag_busy -> tag is already busy
// failed to get driver tag
blk_mq_mark_tag_wait
spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait)
__add_wait_queue(wq, wait) -> wait queue active
blk_mq_get_driver_tag
__blk_mq_tag_busy
-> 1) tag must be idle, which means there can't be inflight IO
spin_lock_irq(&tags->lock) -> lock B (hctx->tags)
spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally
-> 2) context must be preempt by IO interrupt to trigger deadlock.
As shown above, the deadlock is not possible in theory, but the warning
still need to be fixed.
Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq.
Fixes: 4f1731df60f9 ("blk-mq: fix potential io hang by wrong 'wake_batch'")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240815024736.2040971-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
read_balance() will avoid reading from slow disks as much as possible,
however, if valid data only lands in slow disks, and a new normal disk
is still in recovery, unrecovered data can be read:
raid1_read_request
read_balance
raid1_should_read_first
-> return false
choose_best_rdev
-> normal disk is not recovered, return -1
choose_bb_rdev
-> missing the checking of recovery, return the normal disk
-> read unrecovered data
Root cause is that the checking of recovery is missing in
choose_bb_rdev(). Hence add such checking to fix the problem.
Also fix similar problem in choose_slow_rdev().
Cc: stable@vger.kernel.org
Fixes: 9f3ced792203 ("md/raid1: factor out choose_bb_rdev() from read_balance()")
Fixes: dfa8ecd167c1 ("md/raid1: factor out choose_slow_rdev() from read_balance()")
Reported-and-tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Closes: https://lore.kernel.org/all/9952f532-2554-44bf-b906-4880b2e88e3a@o2.pl/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240803091137.3197008-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Extent Space Efficient (ESE) or thin provisioned volumes need to be
formatted on demand during usual IO processing.
The dasd_ese_needs_format function checks for error codes that signal
the non existence of a proper track format.
The check for incorrect length is to imprecise since other error cases
leading to transport of insufficient data also have this flag set.
This might lead to data corruption in certain error cases for example
during a storage server warmstart.
Fix by removing the check for incorrect length and replacing by
explicitly checking for invalid track format in transport mode.
Also remove the check for file protected since this is not a valid
ESE handling case.
Cc: stable@vger.kernel.org # 5.3+
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240812125733.126431-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit bc792884b76f ("s390/dasd: Establish DMA alignment").
Quoting the original commit:
linux-next commit bf8d08532bc1 ("iomap: add support for dma aligned
direct-io") changes the alignment requirement to come from the block
device rather than the block size, and the default alignment
requirement is 512-byte boundaries. Since DASD I/O has page
alignments for IDAW/TIDAW requests, let's override this value to
restore the expected behavior.
I mentioned TIDAW, but that was wrong. TIDAWs have no distinct alignment
requirement (per p. 15-70 of POPS SA22-7832-13):
Unless otherwise specified, TIDAWs may designate
a block of main storage on any boundary and length
up to 4K bytes, provided the specified block does not
cross a 4 K-byte boundary.
IDAWs do, but the original commit neglected that while ECKD DASD are
typically formatted in 4096-byte blocks, they don't HAVE to be. Formatting
an ECKD volume with smaller blocks is permitted (dasdfmt -b xxx), and the
problematic commit enforces alignment properties to such a device that
will result in errors, such as:
[test@host ~]# lsdasd -l a367 | grep blksz
blksz: 512
[test@host ~]# mkfs.xfs -f /dev/disk/by-path/ccw-0.0.a367-part1
meta-data=/dev/dasdc1 isize=512 agcount=4, agsize=230075 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
data = bsize=4096 blocks=920299, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
error reading existing superblock: Invalid argument
mkfs.xfs: pwrite failed: Invalid argument
libxfs_bwrite: write failed on (unknown) bno 0x70565c/0x100, err=22
mkfs.xfs: Releasing dirty buffer to free list!
found dirty buffer (bulk) on free list!
mkfs.xfs: pwrite failed: Invalid argument
...snipped...
The original commit omitted the FBA discipline for just this reason,
but the formatted block size of the other disciplines was overlooked.
The solution to all of this is to revert to the original behavior,
such that the block size can be respected. There were two commits [1]
that moved this code in the interim, so a straight git-revert is not
possible, but the change is straightforward.
But what of the original problem? That was manifested with a direct-io
QEMU guest, where QEMU itself was changed a month or two later with
commit 25474d90aa ("block: use the request length for iov alignment")
such that the blamed kernel commit is unnecessary.
[1] commit 0127a47f58c6 ("dasd: move queue setup to common code")
commit fde07a4d74e3 ("dasd: use the atomic queue limits API")
Fixes: bc792884b76f ("s390/dasd: Establish DMA alignment")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240812125733.126431-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
shuffle few fields to reduce the holes within nvme_ns_head.
On x86_64, the size is reduced to 1104 bytes from 1120 bytes.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
u8 fits the need, so stop using int for it.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
pi_offset field is not required to be present in nvme_ns_head.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
First parameter of nvme_init_integrity() is unused.
Remove it, and modify the callers.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The struct 'latency_bucket' and the #define 'request_bucket_index'
are unused since
commit bf20ab538c81 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
and the 'LATENCY_BUCKET_SIZE' #define was only used by the
'request_bucket_index' define.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240727155824.1000042-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme_map_data() is called when request has physical segments, hence
the nvme_unmap_data() should have same condition to avoid dereference.
Fixes: 4aedb705437f ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In ublk_ctrl_uring_cmd(), ioctl command NR should be used for
matching _IOC_NR(cmd_op).
Fix it by adding one private macro, and this way is clean.
Fixes: 13fe8e6825e4 ("ublk: add UBLK_CMD_DEL_DEV_ASYNC")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240724143311.2646330-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Our test report the following hung task:
[ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds.
[ 2538.459427] Call trace:
[ 2538.459430] __switch_to+0x174/0x338
[ 2538.459436] __schedule+0x628/0x9c4
[ 2538.459442] schedule+0x7c/0xe8
[ 2538.459447] schedule_preempt_disabled+0x24/0x40
[ 2538.459453] __mutex_lock+0x3ec/0xf04
[ 2538.459456] __mutex_lock_slowpath+0x14/0x24
[ 2538.459459] mutex_lock+0x30/0xd8
[ 2538.459462] del_gendisk+0xdc/0x350
[ 2538.459466] sd_remove+0x30/0x60
[ 2538.459470] device_release_driver_internal+0x1c4/0x2c4
[ 2538.459474] device_release_driver+0x18/0x28
[ 2538.459478] bus_remove_device+0x15c/0x174
[ 2538.459483] device_del+0x1d0/0x358
[ 2538.459488] __scsi_remove_device+0xa8/0x198
[ 2538.459493] scsi_forget_host+0x50/0x70
[ 2538.459497] scsi_remove_host+0x80/0x180
[ 2538.459502] usb_stor_disconnect+0x68/0xf4
[ 2538.459506] usb_unbind_interface+0xd4/0x280
[ 2538.459510] device_release_driver_internal+0x1c4/0x2c4
[ 2538.459514] device_release_driver+0x18/0x28
[ 2538.459518] bus_remove_device+0x15c/0x174
[ 2538.459523] device_del+0x1d0/0x358
[ 2538.459528] usb_disable_device+0x84/0x194
[ 2538.459532] usb_disconnect+0xec/0x300
[ 2538.459537] hub_event+0xb80/0x1870
[ 2538.459541] process_scheduled_works+0x248/0x4dc
[ 2538.459545] worker_thread+0x244/0x334
[ 2538.459549] kthread+0x114/0x1bc
[ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds.
[ 2538.461014] Call trace:
[ 2538.461016] __switch_to+0x174/0x338
[ 2538.461021] __schedule+0x628/0x9c4
[ 2538.461025] schedule+0x7c/0xe8
[ 2538.461030] blk_queue_enter+0xc4/0x160
[ 2538.461034] blk_mq_alloc_request+0x120/0x1d4
[ 2538.461037] scsi_execute_cmd+0x7c/0x23c
[ 2538.461040] ioctl_internal_command+0x5c/0x164
[ 2538.461046] scsi_set_medium_removal+0x5c/0xb0
[ 2538.461051] sd_release+0x50/0x94
[ 2538.461054] blkdev_put+0x190/0x28c
[ 2538.461058] blkdev_release+0x28/0x40
[ 2538.461063] __fput+0xf8/0x2a8
[ 2538.461066] __fput_sync+0x28/0x5c
[ 2538.461070] __arm64_sys_close+0x84/0xe8
[ 2538.461073] invoke_syscall+0x58/0x114
[ 2538.461078] el0_svc_common+0xac/0xe0
[ 2538.461082] do_el0_svc+0x1c/0x28
[ 2538.461087] el0_svc+0x38/0x68
[ 2538.461090] el0t_64_sync_handler+0x68/0xbc
[ 2538.461093] el0t_64_sync+0x1a8/0x1ac
T1: T2:
sd_remove
del_gendisk
__blk_mark_disk_dead
blk_freeze_queue_start
++q->mq_freeze_depth
bdev_release
mutex_lock(&disk->open_mutex)
sd_release
scsi_execute_cmd
blk_queue_enter
wait_event(!q->mq_freeze_depth)
mutex_lock(&disk->open_mutex)
SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in
this scenario. This is a classic ABBA deadlock. To fix the deadlock,
make sure we don't try to acquire disk->open_mutex after freezing
the queue.
Cc: stable@vger.kernel.org
Fixes: eec1be4c30df ("block: delete partitions later in del_gendisk")
Signed-off-by: Yang Yang <yang.yang@vivo.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: and Cc: stable tags are missing. Otherwise this patch looks fine
Link: https://lore.kernel.org/r/20240724070412.22521-1-yang.yang@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add missing documentation of peer_device parameter to Kernel doc.
These parameters were added in commit 8164dd6c8ae1 ("drbd: Add peer
device parameter to whole-bitmap I/O handlers")
Flagged by W=1 builds.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240723-drbd-doc-v1-1-a04d9b7a9688@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reported-by: syzbot+f765e51170cf13493f0b@syzkaller.appspotmail.com
Fixes: f12410bb7ddd ("bcachefs: Add an error message for insufficient rw journal devs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A network filesystem needs to implement a netfslib hook to invalidate
fscache if it's to be able to use the cache.
Fix cifs to implement the cache invalidation hook.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Syz reports a problem, which boils down to NULL vs IS_ERR inconsistent
error handling in io_alloc_pbuf_ring().
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__io_remove_buffers+0xac/0x700 io_uring/kbuf.c:341
Call Trace:
<TASK>
io_put_bl io_uring/kbuf.c:378 [inline]
io_destroy_buffers+0x14e/0x490 io_uring/kbuf.c:392
io_ring_ctx_free+0xa00/0x1070 io_uring/io_uring.c:2613
io_ring_exit_work+0x80f/0x8a0 io_uring/io_uring.c:2844
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Cc: stable@vger.kernel.org
Reported-by: syzbot+2074b1a3d447915c6f1c@syzkaller.appspotmail.com
Fixes: 87585b05757dc ("io_uring/kbuf: use vm_insert_pages() for mmap'ed pbuf ring")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c5f9df20560bd9830401e8e48abc029e7cfd9f5e.1721329239.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a report that iowq executed getsockopt never completes. The
reason being that io_uring_cmd_sock() can return a positive result, and
io_uring_cmd() propagates it back to core io_uring, instead of IOU_OK.
In case of io_wq_submit_work(), the request will be dropped without
completing it.
The offending code was introduced by a hack in
a9c3eda7eada9 ("io_uring: fix submission-failure handling for uring-cmd"),
however it was fine until getsockopt was introduced and started
returning positive results.
The right solution is to always return IOU_OK, since
e0b23d9953b0c ("io_uring: optimise ltimeout for inline execution"),
we should be able to do it without problems, however for the sake of
backporting and minimising side effects, let's keep returning negative
return codes and otherwise do IOU_OK.
Link: https://github.com/axboe/liburing/issues/1181
Cc: stable@vger.kernel.org
Fixes: 8e9fad0e70b7b ("io_uring: Add io_uring command support for sockets")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/ff349cf0654018189b6077e85feed935f0f8839e.1721149870.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
LoongArch defines UPROBE_SWBP_INSN as a function call and this breaks
arch_uprobe_trampoline() which uses it to initialize a static variable.
Add the new "__builtin_constant_p" helper, __emit_break(), and redefine
the current users of larch_insn_gen_break() to use it.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240614174822.GA1185149@thelio-3990X/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, there are some places to set CSR.PRMD.PWE, the first one is
in hw_breakpoint_thread_switch() to enable user space singlestep via
checking TIF_SINGLESTEP, the second one is in hw_breakpoint_control() to
enable user space watchpoint. For the latter case, it should also check
TIF_LOAD_WATCH to make the logic correct and clear.
Fixes: c8e57ab0995c ("LoongArch: Trigger user-space watchpoints correctly")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
-Zdirect-access-external-data is a new Rust compiler option added in
Rust 1.78, which we use to optimize the access of external data in the
Linux kernel's Rust code. This patch modifies the Rust code in vmlinux
to directly access externa data, using PC-REL instead of GOT. However,
Rust code whithin modules is constrained by the PC-REL addressing range
and is explicitly set to use an indirect method.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
RELR as a relocation packing format for relative relocations for
reducing the size of relative relocation records. In a position
independent executable there are often many relative relocation
records, and our vmlinux is a PIE.
The LLD linker (since 17.0.0) and the BFD linker (since 2.43) supports
packing the relocations in the RELR format for LoongArch, with the flag
-z pack-relative-relocs.
Commits 5cf896fb6be3eff ("arm64: Add support for relocating the kernel
with RELR relocations") and ccb2d173b983984bfa ("Makefile: use -z
pack-relative-relocs") have already added the framework to use RELR.
We just need to wire it up and process the RELR relocation records in
relocate_relative() in addition to the RELA relocation records.
A ".p2align 3" directive is added to la_abs macro or the BFD linker
cannot pack the relocation records against the .la_abs section (the
". = ALIGN(8);" directive in vmlinux.lds.S is too late in the linking
process).
With defconfig and CONFIG_RELR vmlinux.efi is 2.1 MiB (6%) smaller, and
vmlinuz.efi (using gzip compression) is 384 KiB (2.8%) smaller.
Link: https://groups.google.com/d/topic/generic-abi/bX460iggiKg
Link: https://reviews.llvm.org/D138135#4531389
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d89ecf33ab6d
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With our linker script "relocated_addr >= VMLINUX_LOAD_ADDRESS" should
be always true.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
fw_arg1 is in memory space rather than I/O space, so we should use
early_memremap_ro() instead of early_ioremap() to map the cmdline.
Moreover, we should unmap it after using.
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Hibernation assumes the memory layout after resume be the same as that
before sleep, so it expects the kernel is loaded at the same position.
To achieve this goal we automatically disable KASLR if user explicitly
requests hibernation via the "resume=" command line. Since "nohibernate"
and "noresume" have higher priorities than "resume=", we only disable
KASLR if there is no "nohibernate" and "noresume".
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Most LoongArch 64 machines are using custom "SADR" ACPI extension to
perform ACPI S3 sleep. However the standard ACPI way to perform sleep
is to write a value to ACPI PM1/SLEEP_CTL register, and this is never
supported properly in kernel.
Add standard S3 sleep by providing a default DoSuspend function which
calls ACPI's acpi_enter_sleep_state() routine when SADR is not provided
by the firmware.
Also fix suspend assembly code so that ra is set properly before go
into sleep routine. (Previously linked address of jirl was set to a0,
some firmware do require return address in a0 but it's already set with
la.pcrel before).
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add architectural preparation for CPUFreq driver, including: Kconfig,
register definition and platform device registration.
Some of LoongArch processors support DVFS, their IOCSR.FEATURES has
IOCSRF_FREQSCALE set. And they has a micro-core in the package called
SMC (System Management Controller) to scale frequency, voltage, etc.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.
DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.
BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add ARCH_HAS_DEBUG_VM_PGTABLE selection in Kconfig, in order to make
corresponding vm debug features usable on LoongArch. Also update the
corresponding arch-support.txt document.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs. Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support of kernel stack offset randomization while handling syscall,
the offset is defaultly limited by KSTACK_OFFSET_MAX().
In order to avoid triggering stack canaries (due to __builtin_alloca())
and slowing down the entry path, use __no_stack_protector attribute to
disable stack protector for do_syscall() at function level.
With this patch, the REPORT_STACK test show that:
`loongarch64 bits of stack entropy: 7`
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add irq_work support for LoongArch via self IPIs. This make it possible
to run works in hardware interrupt context, which is a prerequisite for
NOHZ_FULL.
Implement:
- arch_irq_work_raise()
- arch_irq_work_has_interrupt()
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some drivers want to use cpu_logical_map(), early_cpu_to_node() and some
other CPU mapping APIs, even if we use "nr_cpus=1" to hard limit the CPU
number. This is strongly required for the multi-bridges machines.
Currently, we stop parsing the MADT if the nr_cpus limit is reached, but
to achieve the above goal we should always enumerate the MADT table and
setup logical-physical CPU mapping whether there is a nr_cpus limit.
Rework the MADT enumeration:
1. Define a flag "cpu_enumerated" to distinguish the first enumeration
(cpu_enumerated=0) and the physical hotplug case (cpu_enumerated=1)
for set_processor_mask().
2. If cpu_enumerated=0, stop parsing only when NR_CPUS limit is reached,
so we can setup logical-physical CPU mapping; if cpu_enumerated=1,
stop parsing when nr_cpu_ids limit is reached, so we can avoid some
runtime bugs. Once logical-physical CPU mapping is setup, we will let
cpu_enumerated=1.
3. Use find_first_zero_bit() instead of cpumask_next_zero() to find the
next zero bit (free logical CPU id) in the cpu_present_mask, because
cpumask_next_zero() will stop at nr_cpu_ids.
4. Only touch cpu_possible_mask if cpu_enumerated=0, this is in order to
avoid some potential crashes, because cpu_possible_mask is marked as
__ro_after_init.
5. In prefill_possible_map(), clear cpu_present_mask bits greater than
nr_cpu_ids, in order to avoid a CPU be "present" but not "possible".
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Chromium sandbox apparently wants to deny statx [1] so it could properly
inspect arguments after the sandboxed process later falls back to fstat.
Because there's currently not a "fd-only" version of statx, so that the
sandbox has no way to ensure the path argument is empty without being
able to peek into the sandboxed process's memory. For architectures able
to do newfstatat though, glibc falls back to newfstatat after getting
-ENOSYS for statx, then the respective SIGSYS handler [2] takes care of
inspecting the path argument, transforming allowed newfstatat's into
fstat instead which is allowed and has the same type of return value.
But, as LoongArch is the first architecture to not have fstat nor
newfstatat, the LoongArch glibc does not attempt falling back at all
when it gets -ENOSYS for statx -- and you see the problem there!
Actually, back when the LoongArch port was under review, people were
aware of the same problem with sandboxing clone3 [3], so clone was
eventually kept. Unfortunately it seemed at that time no one had noticed
statx, so besides restoring fstat/newfstatat to LoongArch uapi (and
postponing the problem further), it seems inevitable that we would need
to tackle seccomp deep argument inspection.
However, this is obviously a decision that shouldn't be taken lightly,
so we just restore fstat/newfstatat by defining __ARCH_WANT_NEW_STAT
in unistd.h. This is the simplest solution for now, and so we hope the
community will tackle the long-standing problem of seccomp deep argument
inspection in the future [4][5].
Also add "newstat" to syscall_abis_64 in Makefile.syscalls due to
upstream asm-generic changes.
More infomation please reading this thread [6].
[1] https://chromium-review.googlesource.com/c/chromium/src/+/2823150
[2] https://chromium.googlesource.com/chromium/src/sandbox/+/c085b51940bd/linux/seccomp-bpf-helpers/sigsys_handlers.cc#355
[3] https://lore.kernel.org/linux-arch/20220511211231.GG7074@brightrain.aerifal.cx/
[4] https://lwn.net/Articles/799557/
[5] https://lpc.events/event/4/contributions/560/attachments/397/640/deep-arg-inspection.pdf
[6] https://lore.kernel.org/loongarch/20240226-granit-seilschaft-eccc2433014d@brauner/T/#t
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add a tracepoint to track the credit changes and server in_flight value
involved in the lifetime of a R/W request, logging it against the
request/subreq debugging ID. This requires the debugging IDs to be
recorded in the cifs_credits struct.
The tracepoint can be enabled with:
echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_rw_credits/enable
Also add a three-state flag to struct cifs_credits to note if we're
interested in determining when the in_flight contribution ends and, if so,
to track whether we've decremented the contribution yet.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
At the moment, at the end of a DIO write, cifs calls netfs_resize_file() to
adjust the size of the file if it needs it. This will reduce the
zero_point (the point above which we assume a read will just return zeros)
if it's more than the new i_size, but won't increase it.
With DIO writes, however, we definitely want to increase it as we have
clobbered the local pagecache and then written some data that's not
available locally.
Fix cifs to make the zero_point above the end of a DIO or unbuffered write.
This fixes corruption seen occasionally with the generic/708 xfs-test. In
that case, the read-back of some of the written data is being
short-circuited and replaced with zeroes.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Cc: stable@vger.kernel.org
Reported-by: Steve French <sfrench@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cifs_strict_readv(), the default rc (-EACCES) is accidentally cleared by
a successful return from netfs_start_io_direct(), such that if
cifs_find_lock_conflict() fails, we don't return an error.
Fix this by resetting the default error code.
Fixes: 14b1cd25346b ("cifs: Fix locking in cifs_strict_readv()")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a subrequest is marked for needing retry, netfs will call
cifs_prepare_write() which will make cifs repick the server for the op
before renegotiating credits; it then calls cifs_issue_write() which
invokes smb2_async_writev() - which re-repicks the server.
If a different server is then selected, this causes the increment of
server->in_flight to happen against one record and the decrement to happen
against another, leading to misaccounting.
Fix this by just removing the repick code in smb2_async_writev(). As this
is only called from netfslib-driven code, cifs_prepare_write() should
always have been called first, and so server should never be NULL and the
preparatory step is repeated in the event that we do a retry.
The problem manifests as a warning looking something like:
WARNING: CPU: 4 PID: 72896 at fs/smb/client/smb2ops.c:97 smb2_add_credits+0x3f0/0x9e0 [cifs]
...
RIP: 0010:smb2_add_credits+0x3f0/0x9e0 [cifs]
...
smb2_writev_callback+0x334/0x560 [cifs]
cifs_demultiplex_thread+0x77a/0x11b0 [cifs]
kthread+0x187/0x1d0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
Which may be triggered by a number of different xfstests running against an
Azure server in multichannel mode. generic/249 seems the most repeatable,
but generic/215, generic/249 and generic/308 may also show it.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Cc: stable@vger.kernel.org
Reported-by: Steve French <smfrench@gmail.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Aurelien Aptel <aaptel@suse.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are common cases where copy_file_range can noisily
log "source and target of copy not on same server"
e.g. the mv command across mounts to two different server's shares.
Change this to informational rather than logging as an error.
A followon patch will add dynamic trace points e.g. for
cifs_file_copychunk_range
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The congestion_count was introduced into the struct cgroup by
commit d09d8df3a294 ("blkcg: add generic throttling mechanism"),
but since it is closely related to the blkio subsys, it is not
appropriate to put it in the struct cgroup, so let's move it to
struct blkcg. There should be no functional changes because blkcg
is per cgroup.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240716133058.3491350-1-xiujianfeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Christoph Hellwig
Georg Gottleuber
Keith Busch
Maurizio Lombardi
Jinjie Ruan
Nilay Shroff
Ming Lei
John Garry
Li Lingfeng
Yu Kuai
Stefan Haberland
Eric Farman
Kanchan Joshi
Dr. David Alan Gilbert
Leon Romanovsky
Yang Yang
Simon Horman
Kent Overstreet
David Howells
Pavel Begunkov
Oleg Nesterov
Tiezhu Yang
WANG Rui
Xi Ruoyao
Huacai Chen
Jiaxun Yang
Steve French
Xiu Jianfeng