| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918085951.1234172-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230918085951.1234172-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The two drivers compile fine on arm64, powerpc, m68k and s390. So make
it possible to enable the drivers in the presence of COMPILE_TEST.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230918085951.1234172-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The values of the limit registers affect the fan speed in a
particular way. Document this behaviour so that future users
can exploit it if required.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
After some testing on a Fujitsu Esprimo P720, it turned out that
the limit registers are indeed writable and affect the fan control
algorithm. This is supported by the datasheet, which says that the
fan control functions are based on the limit and parameter registers.
Since accessing those registers is very inefficient, the existing
regmap cache is used to cache those registers values.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-5-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Accessing virtual registers is very inefficient, so pwm map values
should be cached when possible, else userspace could effectively do
a DOS attack by reading pwm map values in a while loop.
Use the regmap cache to cache those values.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When the lock bit inside SCH5627_REG_CTRL is set, then the virtual
registers become read-only until the next power cycle.
Disallow write access to those registers in such a case.
Tested on a Fujitsu Esprimo P720.
Fixes: aa9f833dfc12 ("hwmon: (sch5627) Add pwmX_auto_channels_temp support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use bit macros then accessing SCH5627_REG_CTRL, so that people
do not need to look at the datasheet to find out what each bit
does.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Simplify tmp51x_read_properties() by replacing 'nfactor' ->'data->nfactor'
in device_property_read_u32_array() and drop the local variable as it is
unused.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230907071404.24334-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The tmp512 chip has 3 channels whereas tmp513 has 4 channels. Avoid
using tmp51x_ids for this HW difference by replacing OF/ID table
data with maximum channels supported by the device.
Replace id->max_channels variable from struct tmp51x_data and drop the
macros TMP51{2,3}_TEMP_CONFIG_DEFAULT as it can be derived from the macro
TMP51X_TEMP_CONFIG_DEFAULT and update the logic in tmp51x_is_visible(),
tmp51x_read_properties() and tmp51x_init() using max_channels.
While at it, drop enum tmp51x_ids as there is no user and remove
trailing comma in the terminator entry for OF table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230907071404.24334-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
TDA38640 can operate in either PMBus mode or SVID mode.
In SVID mode, by design ENABLE pin is the only option for controlling
the output rail i.e., ENABLE pin is chained to power good of another
reglator & FPGA.
In cases where the chip is configured for SVID mode, and the ENABLE pin
is set at a fixed level or is left unconnected (with an internal
pull-down), while requiring software control, the following
workaround is necessary.
The workaround utilizes ENABLE pin polarity flipping to control
output rail.
If property 'infineon,en-pin-fixed-level' is specified then
determine if chip is in SVID mode by checking BIT15 of MTP memory offset
0x44 as described in the datasheet.
If chip is in SVID mode then apply the workaround by
1. Determine EN pin level
2. Maps BIT7 of OPERATION(01h) to EN_PIN_POLARITY(BIT1) of
PB_ON_OFF_CONFIG.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230831190731.265099-3-Naresh.Solanki@9elements.com
[groeck: Dropped unnecessary line continuation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add bits found in the ON_OFF_CONFIG register.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230831190731.265099-2-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the DT property 'infineon,en-pin-fixed-level' to
indicated that the chip EN pin is at fixed level
or left unconnected(has internal pull-down).
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230831190731.265099-1-Naresh.Solanki@9elements.com
[groeck: Dropped empty line at end]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
POWER-Z is a series of devices to monitor power characteristics of
USB-C connections and display those on a on-device display.
Some of the devices, notably KM002C and KM003C, contain an additional
port which exposes the measurements via USB.
This is a driver for this monitor port.
It was developed and tested with the KM003C.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230902-powerz-v4-1-7ec2c1440687@weissschuh.net
[groeck:
Release urb after hwmon registration error;
Move priv->status initialization to correct place before reinit_completion
]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The PGOOD fix was intended for MP2973 & MP2971 & not for MP2975.
Fixes: acda945afb46 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231027103352.918895-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This reverts commit 393935baa45e5ccb9603cf7f9f020ed1bc0915f7.
As reported by Ian Nartowicz, this and the next patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.
Fixes: 393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This reverts commit fd2d53c367ae9983c2100ac733a834e0c79d7537.
As reported by Ian Nartowicz, this and the preceding patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.
Fixes: fd2d53c367ae ("hwmon: (sch56xx-common) Add DMI override table")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the regmap conversion in commit 4ef2774511dc ("hwmon: (nct6775)
Convert register access to regmap API") I reused the 'reg' variable
for all three register reads in the fan speed calculation loop in
nct6775_update_device(), but failed to notice that the value from the
first one (data->REG_FAN[i]) is actually used in the call to
nct6775_select_fan_div() at the end of the loop body. Since that
patch the register value passed to nct6775_select_fan_div() has been
(conditionally) incorrectly clobbered with the value of a different
register than intended, which has in at least some cases resulted in
fan speeds being adjusted down to zero.
Fix this by using dedicated temporaries for the two intermediate
register reads instead of 'reg'.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Reported-by: Thomas Zajic <zlatko@gmx.at>
Tested-by: Thomas Zajic <zlatko@gmx.at>
Cc: stable@vger.kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230929200822.964-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When build with W=1 and "-Werror=format-truncation", below error is
observed in coretemp driver,
drivers/hwmon/coretemp.c: In function 'create_core_data':
>> drivers/hwmon/coretemp.c:393:34: error: '%s' directive output may be truncated writing likely 5 or more bytes into a region of size between 3 and 13 [-Werror=format-truncation=]
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~
drivers/hwmon/coretemp.c:393:26: note: assuming directive output of 5 bytes
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~~~~~~~~~~
drivers/hwmon/coretemp.c:392:17: note: 'snprintf' output 7 or more bytes (assuming 22) into a destination of size 19
392 | snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
393 | "temp%d_%s", attr_no, suffixes[i]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Given that
1. '%d' could take 10 charactors,
2. '%s' could take 10 charactors ("crit_alarm"),
3. "temp", "_" and the NULL terminator take 6 charactors,
fix the problem by increasing CORETEMP_NAME_LENGTH to 28.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310200443.iD3tUbbK-lkp@intel.com/
Link: https://lore.kernel.org/r/20231025122316.836400-1-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
axi_fan_control_irq_handler(), dependent on the private
axi_fan_control_data structure, might be called before the hwmon
device is registered. That will cause an "Unable to handle kernel
NULL pointer dereference" error.
Fixes: 8412b410fa5e ("hwmon: Support ADI Fan Control IP")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231025132100.649499-1-nuno.sa@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
|
|
The code was accidentally mixing new and old style macros, update the
macros used to remove an unused function warning whilst building with
no PM enabled in the config.
Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/all/20230822114914.340359-1-ckeepax@opensource.cirrus.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the TSC_AUX MSR is virtualized, the TSC_AUX value is swap type "B"
within the VMSA. This means that the guest value is loaded on VMRUN and
the host value is restored from the host save area on #VMEXIT.
Since the value is restored on #VMEXIT, the KVM user return MSR support
for TSC_AUX can be replaced by populating the host save area with the
current host value of TSC_AUX. And, since TSC_AUX is not changed by Linux
post-boot, the host save area can be set once in svm_hardware_enable().
This eliminates the two WRMSR instructions associated with the user return
MSR support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d381de38eb0ab6c9c93dda8503b72b72546053d7.1694811272.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm_recalc_instruction_intercepts() is always called at least once
before the vCPU is started, so the setting or clearing of the RDTSCP
intercept can be dropped from the TSC_AUX virtualization support.
Extracted from a patch by Tom Lendacky.
Cc: stable@vger.kernel.org
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Stop zapping invalidate TDP MMU roots via work queue now that KVM
preserves TDP MMU roots until they are explicitly invalidated. Zapping
roots asynchronously was effectively a workaround to avoid stalling a vCPU
for an extended during if a vCPU unloaded a root, which at the time
happened whenever the guest toggled CR0.WP (a frequent operation for some
guest kernels).
While a clever hack, zapping roots via an unbound worker had subtle,
unintended consequences on host scheduling, especially when zapping
multiple roots, e.g. as part of a memslot. Because the work of zapping a
root is no longer bound to the task that initiated the zap, things like
the CPU affinity and priority of the original task get lost. Losing the
affinity and priority can be especially problematic if unbound workqueues
aren't affined to a small number of CPUs, as zapping multiple roots can
cause KVM to heavily utilize the majority of CPUs in the system, *beyond*
the CPUs KVM is already using to run vCPUs.
When deleting a memslot via KVM_SET_USER_MEMORY_REGION, the async root
zap can result in KVM occupying all logical CPUs for ~8ms, and result in
high priority tasks not being scheduled in in a timely manner. In v5.15,
which doesn't preserve unloaded roots, the issues were even more noticeable
as KVM would zap roots more frequently and could occupy all CPUs for 50ms+.
Consuming all CPUs for an extended duration can lead to significant jitter
throughout the system, e.g. on ChromeOS with virtio-gpu, deleting memslots
is a semi-frequent operation as memslots are deleted and recreated with
different host virtual addresses to react to host GPU drivers allocating
and freeing GPU blobs. On ChromeOS, the jitter manifests as audio blips
during games due to the audio server's tasks not getting scheduled in
promptly, despite the tasks having a high realtime priority.
Deleting memslots isn't exactly a fast path and should be avoided when
possible, and ChromeOS is working towards utilizing MAP_FIXED to avoid the
memslot shenanigans, but KVM is squarely in the wrong. Not to mention
that removing the async zapping eliminates a non-trivial amount of
complexity.
Note, one of the subtle behaviors hidden behind the async zapping is that
KVM would zap invalidated roots only once (ignoring partial zaps from
things like mmu_notifier events). Preserve this behavior by adding a flag
to identify roots that are scheduled to be zapped versus roots that have
already been zapped but not yet freed.
Add a comment calling out why kvm_tdp_mmu_invalidate_all_roots() can
encounter invalid roots, as it's not at all obvious why zapping
invalidated roots shouldn't simply zap all invalid roots.
Reported-by: Pattara Teerapong <pteerapong@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Yiwei Zhang<zzyiwei@google.com>
Cc: Paul Hsia <paulhsia@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230916003916.2545000-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All callers except the MMU notifier want to process all address spaces.
Remove the address space ID argument of for_each_tdp_mmu_root_yield_safe()
and switch the MMU notifier to use __for_each_tdp_mmu_root_yield_safe().
Extracted out of a patch by Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cxl_cxims_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-cxl@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230922175319.work.096-kees@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The cxl_test unit test environment models a CXL topology for
sysfs/user-ABI regression testing. It uses interface mocking via the
"--wrap=" linker option to redirect cxl_core routines that parse
hardware registers with versions that just publish objects, like
devm_cxl_enumerate_decoders().
Starting with:
Commit 19ab69a60e3b ("cxl/port: Store the port's Component Register mappings in struct cxl_port")
...port register enumeration is moved into devm_cxl_add_port(). This
conflicts with the "cxl_test avoids emulating registers stance" so
either the port code needs to be refactored (too violent), or modified
so that register enumeration is skipped on "fake" cxl_test ports
(annoying, but straightforward).
This conflict has happened previously and the "check for platform
device" workaround to avoid instrusive refactoring was deployed in those
scenarios. In general, refactoring should only benefit production code,
test code needs to remain minimally instrusive to the greatest extent
possible.
This was missed previously because it may sometimes just cause warning
messages to be emitted, but it can also cause test failures. The
backport to -stable is only nice to have for clean cxl_test runs.
Fixes: 19ab69a60e3b ("cxl/port: Store the port's Component Register mappings in struct cxl_port")
Cc: stable@vger.kernel.org
Reported-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169476525052.1013896.6235102957693675187.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Using the following code with libtracefs:
int dfd;
// create the directory events/kprobes/kp1
tracefs_kprobe_raw(NULL, "kp1", "schedule_timeout", "time=$arg1");
// Open the kprobes directory
dfd = tracefs_instance_file_open(NULL, "events/kprobes", O_RDONLY);
// Do a lookup of the kprobes/kp1 directory (by looking at enable)
tracefs_file_exists(NULL, "events/kprobes/kp1/enable");
// Now create a new entry in the kprobes directory
tracefs_kprobe_raw(NULL, "kp2", "schedule_hrtimeout", "expires=$arg1");
// Do another lookup to create the dentries
tracefs_file_exists(NULL, "events/kprobes/kp2/enable"))
// Close the directory
close(dfd);
What happened above, the first open (dfd) will call
dcache_dir_open_wrapper() that will create the dentries and up their ref
counts.
Now the creation of "kp2" will add another dentry within the kprobes
directory.
Upon the close of dfd, eventfs_release() will now do a dput for all the
entries in kprobes. But this is where the problem lies. The open only
upped the dentry of kp1 and not kp2. Now the close is decrementing both
kp1 and kp2, which causes kp2 to get a negative count.
Doing a "trace-cmd reset" which deletes all the kprobes cause the kernel
to crash! (due to the messed up accounting of the ref counts).
To solve this, save all the dentries that are opened in the
dcache_dir_open_wrapper() into an array, and use this array to know what
dentries to do a dput on in eventfs_release().
Since the dcache_dir_open_wrapper() calls dcache_dir_open() which uses the
file->private_data, we need to also add a wrapper around dcache_readdir()
that uses the cursor assigned to the file->private_data. This is because
the dentries need to also be saved in the file->private_data. To do this
create the structure:
struct dentry_list {
void *cursor;
struct dentry **dentries;
};
Which will hold both the cursor and the dentries. Some shuffling around is
needed to make sure that dcache_dir_open() and dcache_readdir() only see
the cursor.
Link: https://lore.kernel.org/linux-trace-kernel/20230919211804.230edf1e@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230922163446.1431d4fa@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 63940449555e7 ("eventfs: Implement eventfs lookup, read, open functions")
Reported-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
Uwe Kleine-König
Armin Wolf
Biju Das
Patrick Rudolph
Thomas Weißschuh
Naresh Solanki
Guenter Roeck
Zev Weiss
Zhang Rui
Dragos Bogdan
Linus Torvalds
Charles Keepax
Tom Lendacky
Paolo Bonzini
Sean Christopherson
Kees Cook
Dan Williams
Steven Rostedt (Google)