| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This helper can be used to set the parent-death signal of the calling
process to SIGKILL to ensure that the process will be killed if the
UML kernel dies unexpectedly without proper cleanup. This helper will
be used in the follow-up patches.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241024142828.2612828-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Evidently, PATH_MAX isn't always defined, at least not via <limits.h>.
Simply remove the use and replace it by a constant 4k. As stat::st_size
is zero for /proc/self/exe we can't even size it automatically, and it
seems unlikely someone's going to try to run UML with such a path.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410240553.gYNIXN8i-lkp@intel.com/
Fixes: 031acdcfb566 ("um: restore process name")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The PTRACE_GETREGSET API has now existed since Linux 2.6.33. The XSAVE
CPU feature should also be sufficiently common to be able to rely on it.
With this, define our internal FP state to be the hosts XSAVE data. Add
discovery for the hosts XSAVE size and place the FP registers at the end
of task_struct so that we can adjust the size at runtime.
Next we can implement the regset API on top and update the signal
handling as well as ptrace APIs to use them. Also switch coredump
creation to use the regset API and finally set HAVE_ARCH_TRACEHOOK.
This considerably improves the signal frames. Previously they might not
have contained all the registers (i386) and also did not have the
sizes and magic values set to the correct values to permit userspace to
decode the frame.
As a side effect, this will permit UML to run on hosts with newer CPU
extensions (such as AMX) that need even more register state.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241023094120.4083426-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In time-travel mode userspace can do a lot of work without any time
passing. Unfortunately, this can result in OOM situations as the RCU
core code will never be run.
Work around this by keeping track of userspace processes that do not
yield for a lot of operations. When this happens, insert a jiffie into
the sched_clock clock to account time against the process and cause the
bookkeeping to run.
As sched_clock is used for tracing, it is useful to keep it in sync
between the different VMs. As such, try to remove added ticks again when
the actual clock ticks.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241010142537.1134685-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The _PAGE_NEWPAGE bit does not really indicate that this is a new page,
but rather whether this entry needs to be synced or not. Renaming it
to _PAGE_NEEDSYNC will make it more clear how everything ties together.
Suggested-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011102354.1682626-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a PTE is updated in the page table, the _PAGE_NEWPAGE bit will
always be set. And the corresponding page will always be mapped or
unmapped depending on whether the PTE is present or not. The check
on the _PAGE_NEWPROT bit is not really reachable. Abandoning it will
allow us to simplify the code and remove the unreachable code.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011102354.1682626-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of using a custom script to detect and fail on undefined
references, use --no-undefined for all VDSO linker invocations.
Drop the now unused checkundef.sh script.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20241011-vdso-checkundef-v1-2-1a46e0352d20@linutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific. It specifies the name of the file
containing the initrd image, which is unknown to kernel.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-10-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific and is unknown to kernel. It should
not be propagated to kernel, otherwise it will trigger a warning and
be passed to user space as an environment option.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-9-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific and is unknown to kernel. It should
not be propagated to kernel, otherwise it will trigger a warning and
be passed to user space as an environment option.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-8-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific and is unknown to kernel. It should not
be propagated to kernel, otherwise it will be passed to user space as
an environment option by kernel with a warning like:
Unknown kernel command line parameters "hostfs=/foo", will be passed to user space.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-7-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific and is unknown to kernel. It should not
be propagated to kernel, otherwise it could be passed to user space as
a command line option by kernel with a warning like:
Unknown kernel command line parameters "noreboot", will be passed to user space.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-6-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific and is unknown to kernel. It should not
be propagated to kernel, otherwise it will be passed to user space as
an environment option by kernel with a warning like:
Unknown kernel command line parameters "dtb=/foo", will be passed to user space.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-5-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific and is unknown to kernel. It should not
be propagated to kernel, otherwise it will be passed to user space as
an environment option by kernel with a warning like:
Unknown kernel command line parameters "uml_dir=/foo", will be passed to user space.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This parameter is UML specific and is unknown to kernel. It should not
be propagated to kernel, otherwise it will be passed to user space as
an environment option by kernel with a warning like:
Unknown kernel command line parameters "mem=2G", will be passed to user space.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It does nothing but emit a warning when 'debug' is provided in the
kernel command line. It can be a bit annoying, as 'debug' is also a
valid kernel parameter to enable kernel debugging.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was perhaps intended to do _nofault copies, but the
real reason is lost to history. Remove this, it's not
needed, and using longjmp() out of the middle of the
signal handler with all the state it has modified is
not going to be a good idea anyway.
Link: https://patch.msgid.link/20241010224513.901c4d390b3e.Ia74742668b44603c1ca23dd36f90e964e6e7ee55@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After the execve() to disable ASLR, comm is now "exe",
which is a bit confusing. Use readlink() to get this
to the right name again.
Disable stack frame size warnings on main.o since it's
part of the initial userspace and can use larger stack.
Fixes: 68b9883cc16e ("um: Discover host_task_size from envp")
Link: https://patch.msgid.link/20241010161411.c576e2aeb3e5.I244d4f34b8a8555ee5bec0e1cf5027bce4cc491b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since __attribute__((naked)) cannot be used with functions
containing C statements, just generate the few instructions
it needs in assembly directly.
While at it, fix the stack usage ("1 + 2*x - 1" is odd) and
document what it must do, and why it must adjust the stack.
Fixes: 8508a5e0e9db ("um: Fix misaligned stack in stub_exe")
Link: https://lore.kernel.org/linux-um/CABVgOSntH-uoOFMP5HwMXjx_f1osMnVdhgKRKm4uz6DFm2Lb8Q@mail.gmail.com/
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The stub_exe could segfault when built with some compilers (e.g. gcc
13.2.0), as SSE instructions which relied on stack alignment could be
generated, but the stack was misaligned.
This seems to be due to the __start entry point being run with a 16-byte
aligned stack, but the x86_64 SYSV ABI wanting the stack to be so
aligned _before_ a function call (so it is misaligned when the function
is entered due to the return address being pushed). The function
prologue then realigns it. Because the entry point is never _called_,
and hence there is no return address, the prologue is therefore actually
misaligning it, and causing the generated movaps instructions to
SIGSEGV. This results in the following error:
start_userspace : expected SIGSTOP, got status = 139
Don't generate this prologue for __start by using
__attribute__((naked)), which resolves the issue.
Fixes: 32e8eaf263d9 ("um: use execveat to create userspace MMs")
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/linux-um/CABVgOS=boUoG6=LHFFhxEd8H8jDP1zOaPKFEjH+iy2n2Q5S2aQ@mail.gmail.com/
Link: https://patch.msgid.link/20241017231007.1500497-2-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When automatic variable initialization is enabled via
CONFIG_INIT_STACK_ALL_{PATTERN,ZERO}, clang will insert a call to
memset() to initialize an object created with __builtin_alloca(). This
ultimately breaks the build when linking stub_exe because it is a
standalone executable that does not include or link against memset().
ld: arch/um/kernel/skas/stub_exe.o: in function `_start':
arch/um/kernel/skas/stub_exe.c:83:(.ltext+0x15): undefined reference to `memset'
Disable automatic variable initialization for stub_exe.c by passing the
default value of 'uninitialized' to '-ftrivial-auto-var-init', which
avoids generating the call to memset(). This code is small and runs
quickly as it is just designed to set up an environment, so stack
variable initialization is unnecessary overhead for little gain.
Fixes: 32e8eaf263d9 ("um: use execveat to create userspace MMs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20241016-uml-fix-stub_exe-clang-v1-2-3d6381dc5a78@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When building stub_exe with clang, there is an error because '-n' is not
a recognized flag by the clang driver (which is being used to invoke the
linker):
clang: error: unknown argument: '-n'
'-n' should be passed along to the linker, as it is the short flag for
'--nmagic', so prefix it with '-Wl,'.
Fixes: 32e8eaf263d9 ("um: use execveat to create userspace MMs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20241016-uml-fix-stub_exe-clang-v1-1-3d6381dc5a78@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The larger memory space is useful to support more applications inside
UML. One example for this is ASAN instrumentation of userspace
applications which requires addresses that would otherwise not be
available.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-11-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With the change to use execve() we can now safely clear the memory up to
STUB_START as rseq will not be trying to use memory in that region. Also,
on 64 bit the previous changes should mean that there is no usable
memory range above the stub.
Make the change and remove the comment as it is not needed anymore.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-10-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When loading the UML binary, the host kernel will place the stack at the
highest possible address. It will then map the program name and
environment variables onto the start of the stack.
As such, an easy way to figure out the host_task_size is to use the
highest pointer to an environment variable as a reference.
Ensure that this works by disabling address layout randomization and
re-executing UML in case it was enabled.
This increases the available TASK_SIZE for 64 bit UML considerably.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-9-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We may have a TASK_SIZE from the host that is bigger than UML is able to
address with a three-level pagetable on 64-bit. Guard against that by
clipping the maximum TASK_SIZE to the maximum addressable area.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-8-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of using the current stack pointer, we can also use the current
instruction to calculate where the stub data is. With this the stub data
only needs to be aligned to a full page boundary.
Changing this has the advantage that we do not have a hole in the memory
space above the stub data (which would need to be explicitly cleared).
Another motivation to do this is that with the planned addition of a
SECCOMP based userspace the stack pointer may not be fully trustworthy.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-7-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The code assumes that the stub code can fit into a single page. This is
unlikely to ever change, but add a link time assert instead so that
there will be no hard to debug error.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-6-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The winch "thread" is really a separate process. Using prctl to set
PR_SET_PDEATHSIG ensures that this separate thread will be killed if the
UML kernel itself dies unexpectedly and does not perform proper cleanup.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-5-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Enable PR_SET_PDEATHSIG so that the UML userspace process will be killed
when the kernel exits unexpectedly.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-4-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Using clone will not undo features that have been enabled by libc. An
example of this already happening is rseq, which could cause the kernel
to read/write memory of the userspace process. In the future the
standard library might also use mseal by default to protect itself,
which would also thwart our attempts at unmapping everything.
Solve all this by taking a step back and doing an execve into a tiny
static binary that sets up the minimal environment required for the
stub without using any standard library. That way we have a clean
execution environment that is fully under the control of UML.
Note that this changes things a bit as the FDs are not anymore shared
with the kernel. Instead, we explicitly share the FDs for the physical
memory and all existing iomem regions. Doing this is fine, as iomem
regions cannot be added at runtime.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-3-benjamin@sipsolutions.net
[use pipe() instead of pipe2(), remove unneeded close() calls]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The 64bit version did not have a stub_syscall1 function yet. Add it as
it will be useful to implement a static binary for stub loading.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We do not need the extra save/restore of the FP registers when getting
the fault information. This was originally added in commit 2f56debd77a8
("uml: fix FP register corruption") but at that time the code was not
saving/restoring the FP registers when switching to userspace. This was
fixed in commit fbfe9c847edf ("um: Save FPU registers between task
switches") and since then the auxiliary registers have not been useful.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241004233821.2130874-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
CC_CAN_LINK_STATIC_NO_RUNTIME_DEPS is not defined anywhere.
In the submitted patch set [1], the first patch "um/kconfig: introduce
CC_CAN_LINK_STATIC_NO_RUNTIME_DEPS" was not applied.
Only 2/3 and 3/3 were applied, which are now:
- 730586ff7fad ("um: Allow static linking for non-glibc implementations")
- 5e1121cd43d4 ("um: Some fixes to build UML with musl")
Given that nobody has noticed the missing first patch for many years,
it seems it was unnecessary.
[1]: https://lore.kernel.org/lkml/20200719210222.2811-1-ignat@cloudflare.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20240924113342.32530-1-masahiroy@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The highmem support has been removed by commit a98a6d864d3b ("um:
Remove broken highmem support"). The 2-level page table is sufficient
on UML/i386 now. Remove the 3-level page table support on UML/i386
which is still marked as experimental.
Suggested-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240918061702.614837-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When switching from userspace to the kernel, all registers including the
FP registers are copied into the kernel and restored later on. As such,
the true source for the FP register state is actually already in the
kernel and they should never be grabbed from the userspace process.
Change the various places to simply copy the data from the internal FP
register storage area. Note that on i386 the format of PTRACE_GETFPREGS
and PTRACE_GETFPXREGS is different enough that conversion would be
needed. With this patch, -EINVAL is returned if the non-native format is
requested.
The upside is, that this patchset fixes setting registers via ptrace
(which simply did not work before) as well as fixing setting floating
point registers using the mcontext on signal return on i386.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913133845.964292-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This function is expected to return a boolean value, which should be
true on success and false on failure.
Fixes: d1254b12c93e ("uml: fix x86_64 core dump crash")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240913023302.130300-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently physmem_size is defined as long long but declared locally
as unsigned long long before using it in separate .c files. Make them
match by defining physmem_size as unsigned long long and also move
the declaration to a common header to allow the compiler to check it.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-5-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Highmem was only supported on UML/i386. And the support has been
removed by commit a98a6d864d3b ("um: Remove broken highmem support").
Remove the leftovers and stop UML from trying to setup highmem when
the sum of physmem_size and iomem_size exceeds max_physmem.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-4-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This issue happens when the real map size is greater than LONG_MAX,
which can be easily triggered on UML/i386.
Fixes: fe205bdd1321 ("um: Print minimum physical memory requirement")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
high_physmem has already been declared in as-layout.h, so there is
no need to declare it explicitly in the .c file again.
While at it, group the declarations of __real_malloc and __real_free
together to make the code slightly more readable.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240916045950.508910-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The x86 port of UM has efficient unaligned access. Set the option as it
is appropriate and will e.g. cause UBSAN to not enable unaligned memory
access checking by default.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-6-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-5-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-4-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function is not used anywhere in the codebase.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240913134442.967599-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
|
|
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Import list_is_first, list_is_last, list_replace, and list_replace_init.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
Tiwei Bie
Johannes Berg
Benjamin Berg
Thomas Weißschuh
David Gow
Nathan Chancellor
Masahiro Yamada
Linus Torvalds
Aaron Thompson
Xu Yang
Sami Tolvanen