| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This interface will allow sync object to be used to back
Vulkan fences. This API is pretty much the vulkan fence waiting
API, and I've ported the code from amdgpu.
v2: accept relative timeout, pass remaining time back
to userspace.
v3: return to absolute timeouts.
v4: absolute zero = poll,
rewrite any/all code to have same operation for arrays
return -EINVAL for 0 fences.
v4.1: fixup fences allocation check, use u64_to_user_ptr
v5: move to sec/nsec, and use timespec64 for calcs.
v6: use -ETIME and drop the out status flag. (-ETIME
is suggested by ickle, I can feel a shed painting)
v7: talked to Daniel/Arnd, use ktime and ns everywhere.
v8: be more careful in the timeout calculations
use uint32_t for counter variables so we don't overflow
graciously handle -ENOINT being returned from dma_fence_wait_timeout
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The atomic exchange operation in drm_syncobj_replace_fence is sufficient
for the case where it races with itself. However, if you have a race
between a replace_fence and dma_fence_get(syncobj->fence), you may end
up with the entire replace_fence happening between the point in time
where the one thread gets the syncobj->fence pointer and when it calls
dma_fence_get() on it. If this happens, then the reference may be
dropped before we get a chance to get a new one. The new helper uses
dma_fence_get_rcu_safe to get rid of the race.
This is also needed because it allows us to do a bit more than just get
a reference in drm_syncobj_fence_get should we wish to do so.
v2:
- RCU isn't that scary
- Call rcu_read_lock/unlock
- Don't rename fence to _fence
- Make the helper static inline
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The function has far more in common with drm_syncobj_find than with
any in the get/put functions.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Currently the hikey dsi logic cannot generate accurate byte
clocks values for all pixel clock values. Thus if a mode clock
is selected that cannot match the calculated byte clock, the
device will boot with a blank screen.
This patch uses the new mode_valid callback (many thanks to
Jose Abreu for upstreaming it!) to ensure we don't select
modes we cannot generate.
Also, since the ade crtc code will adjust the mode in mode_set,
this patch also adds a mode_fixup callback which we use to make
sure we are validating the mode clock that will eventually be
used.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The function that was added doesn't actually build:
arch/arm/mach-omap2/display.c: In function 'omapdss_init_fbdev':
arch/arm/mach-omap2/display.c:184:2: error: 'r' undeclared (first use in this function)
This adds a declaration for 'r' to fix it.
Fixes: 5ce783025c82 ("ARM: OMAP2+: Don't register omapdss device for omapdrm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Now, we can use of_graph_get_remote_endpoint(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Seems that on omap3 enabling a crtc without any planes causes a sync
lost flood. This only happens on the first enable, and after that it
works. This looks like an HW issue and it's unclear why this is
happening or how to fix it.
This started happening after 897145d0c7010b4e07fa9bc674b1dfb9a2c6fff9
("drm/omapdrm: Move commit_modeset_enables() before commit_planes()")
which, as a work-around, changed omapdrm first to do the modeset enable,
and plane set only after that. This WA should be fine on all DSS
versions, but apparently OMAP3 DSS is an exception.
This patch reverts that work-around for OMAP3 DSS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
7d267f068a8b4944d52e8b0ae4c8fcc1c1c5c5ba ("drm/omap: work-around for
errata i886") changed how the PLL dividers and multipliers are
calculated. While the new way should work fine for all the PLLs, it
breaks omap5 PLLs. The issues seen are rather odd: seemed that the
output clock rate is half of what we asked. It is unclear what's causing
there issues.
As a work-around this patch adds a "errata_i886" flag, which is set only
for DRA7's PLLs, and the PLL setup is done according to that flag.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
|
|
omapdrm rejects all venc (analog tv-out) videomodes, due to somewhat
strict checking of the values, making tv-out unusable.
We only support two videomodes, one for PAL and one for NTSC, so instead
of trying to check every field in the videomode struct, this patch makes
the driver check only the pixel clock and the size of the display.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
When CONFIG_PM is disabled, we get harmless warnings about unused
functions:
drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1025:12: error: 'mdp5_runtime_resume' defined but not used [-Werror=unused-function]
static int mdp5_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1015:12: error: 'mdp5_runtime_suspend' defined but not used [-Werror=unused-function]
static int mdp5_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~
This marks both functions as __maybe_unused so the compiler
can drop them silently.
Fixes: d68fe15b1878 ("drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
A cleanup left behind an unused variable that we have to remove
in order to avoid this harmless warning:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'a5xx_zap_shader_init':
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:493:19: error: unused variable 'a5xx_gpu' [-Werror=unused-variable]
Fixes: 8d6f08272b6f ("drm/msm: Remove uneeded platform dev members")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Not needed outside of mdp5_crtc.c.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Only needed in msm_fb.c so don't export it.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
We'll later want to re-use this for state-readback when bootloader
enables display, so that we can create an fb for the initial
plane->state->fb.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The drm_framebuffer is refcnt'd these days and will unref the underlying
bo as needed. So we can simplify a little.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
At least for debugging it is nice to have an easy way to force the
driver not to load.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Accessing registers for an unclocked block is an insta-reboot on
snapdragon devices. So add a bit of logic to track the enable_count so
we can WARN_ON() unclocked register writes. This makes it much easier
to track down mistakes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Nearly all of the buffer allocations for kernel allocate an buffer object,
virtual address and GPU iova at the same time. Make a helper function to
handle the details.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[dropped msm_fbdev conversion to new helper, since it interferes with
display-handover work, where we want to separate allocation and mapping]
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Currently the GPU MMU is attached in the adreno_gpu code but as
more and more of the GPU initialization moves to the generic
GPU path we have a need to map and use GPU memory earlier and
earlier. There isn't any reason to defer attaching the MMU
until later so attach it right after the address space is
created so it can be used immediately.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The null check on the array msto is incorrect since msto is never
null. The null check should be instead on msto[i] since this is
being dereferenced in the call to drm_mode_connector_attach_encoder.
Thanks to Emil Velikov for pointing out the mistake in my original
fix and for suggesting the correct fix.
Detected by CoverityScan, CID#1375915 ("Array compared against 0")
Fixes: f479c0ba4a17 ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
These are particularly annoying on Optimus systems where these paths can
be called regularly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality,
ARGB8888's 32-bit depth messes up some formulas that weren't meant for
it, and the alpha is fairly meaningless for the primary plane.
The modesetting logic appears to be fully prepared for RGB565 as well as
XRGB1555 however, as tested with modetest.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We were previously setting the pitch based on a perfectly packed buffer.
This does not necessarily happen. Either modetest started generating
such buffers recently, or earlier testing only happened with well-picked
overlay sizes.
While we're at it, beef up and refactor the error state detection.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Pre-nv50 YUV overlays have stringent requirements for working with the
internal machinery. Instead of rejecting these at update_plane time, we
should instead prevent the framebuffers from being created in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
These are used for accesses to sparse mappings, and we want reads of
such mappings to return 0.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.
(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
so not able to 100% confirm that no other changes from GP107
are needed. Quick testing shows it seems to work well enough
for display. Due to NVIDIA dragging their heels on getting
signed firmware to us, this is the best we can do for now.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Most of these errors seem to be WFD related. Official documentation
says dcb type 8 is reserved. It's probably used for WFD. Silence
the warning in either case.
Connector type 70 is stated to be a virtual connector for WiFi
display. Since we know this, don't warn that we don't.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This warning seems to pop up mainly in laptop cards. Silence it as
it is expected behavior.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
GT215, GF100-GP100, and GP10x are all different.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We assume that each board has 4 heads for GF119+. However this is not
necessarily true - in the case of a GP108 board, the register indicated
that there were only 2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This allows temperature readouts on maxwell2 GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Fixes a false positive from might_sleep(). The reservation object is freshly
initialized, so nobody else can hold the mutex but the function is
called from atomic context.
v2: Correctly invert the check as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mmVGT_INDEX_TYPE has no default value, need to make sure
it's initialized when gfx is initialized.
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The commit 213e08ad60ba
("drm/i915/bxt: add bxt dsi gpio element support")
enables GPIO support for Broxton based platforms.
While using that API we might get into troubles in the future, because
we can't rely on label name in the driver since vendor firmware might
provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in
which case the request will fail).
To avoid inconsistency and potential issues we have two options:
a) generate GPIO ACPI mapping table and supply it via
acpi_dev_add_driver_gpios(), or
b) just pass NULL as connection ID.
The b) approach is much simpler and would work since the driver relies
on GPIO indices only. Moreover, the _CRS fallback mechanism, when
requesting GPIO, has been made stricter, and supplying non-NULL
connection ID when neither _DSD, nor GPIO ACPI mapping is present, is
making request fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921
Fixes: f10e4bf6632b ("gpio: acpi: Even more tighten up ACPI GPIO lookups")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817105541.63914-1-andriy.shevchenko@linux.intel.com
|
|
In a synchronous setup, we may retire the last request before we
complete allocating the next request. As the last request is retired, we
queue a timer to mark the device as idle, and promptly have to execute
ad cancel that timer once we complete allocating the request and need to
keep the device awake. If we rearrange the mark_busy() to occur before
we retire the previous request, we can skip this ping-pong.
v2: Joonas pointed out that unreserve_seqno() was now doing more than
doing seqno handling and should be renamed to reflect its wider purpose.
That also highlighted the new asymmetry with reserve_seqno(), so fixup
that and rename both to [un]reserve_engine().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817144719.10968-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The word out was dropped from the sentence across the line break, put it
back.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
This was the competing idea long ago, but it was only with the rewrite
of the idr as an radixtree and using the radixtree directly ourselves,
along with the realisation that we can store the vma directly in the
radixtree and only need a list for the reverse mapping, that made the
patch performant enough to displace using a hashtable. Though the vma ht
is fast and doesn't require any extra allocation (as we can embed the node
inside the vma), it does require a thread for resizing and serialization
and will have the occasional slow lookup. That is hairy enough to
investigate alternatives and favour them if equivalent in peak performance.
One advantage of allocating an indirection entry is that we can support a
single shared bo between many clients, something that was done on a
first-come first-serve basis for shared GGTT vma previously. To offset
the extra allocations, we create yet another kmem_cache for them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-5-chris@chris-wilson.co.uk
|
|
Since the introduction of being able to perform a lockless lookup of an
object (i915_gem_object_get_rcu() in fbbd37b36fa5 ("drm/i915: Move object
release to a freelist + worker") we no longer need to split the
object/vma lookup into 3 phases and so combine them into a much simpler
single loop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-4-chris@chris-wilson.co.uk
|
|
When userspace is doing most of the work, avoiding relocs (using
NO_RELOC) and opting out of implicit synchronisation (using ASYNC), we
still spend a lot of time processing the arrays in execbuf, even though
we now should have nothing to do most of the time. One issue that
becomes readily apparent in profiling anv is that iterating over the
large execobj[] is unfriendly to the loop prefetchers of the CPU and it
much prefers iterating over a pair of arrays rather than one big array.
v2: Clear vma[] on construction to handle errors during vma lookup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-3-chris@chris-wilson.co.uk
|
Dave Airlie
Jason Ekstrand
John Stultz
Arnd Bergmann
Kuninori Morimoto
Tomi Valkeinen
Rob Clark
Jordan Crouse
Colin Ian King
Ilia Mirkin
Ben Skeggs
Rosen Penev
Karol Herbst
Daniel Vetter
Christian König
Ken Wang
Andy Shevchenko
Chris Wilson