aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-14thermal/cpu_cooling: rename cpufreq_val as clipped_freqViresh Kumar1-5/+5
That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: convert 'switch' block to 'if' block in notifierViresh Kumar1-16/+10
We just need to take care of single event here and there is no need to increase indentation level of most of the code (which causes lines longer that 80 columns to break). Kill the switch block. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: quit early after updating policyViresh Kumar1-0/+1
If a valid cpufreq_dev is found for policy->cpu, we should update the policy and quit the for loop. There is no need to keep traversing the list of cpufreq_dev's. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: No need to initialize max_freq to 0Viresh Kumar1-1/+1
Its always set before getting used, don't initialize it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal: cpu_cooling: fix lockdep problems in cpu_coolingRussell King1-11/+20
A recent change to the cpu_cooling code introduced a AB-BA deadlock scenario between the cpufreq_policy_notifier_list rwsem and the cooling_cpufreq_lock. This is caused by cooling_cpufreq_lock being held before the registration/removal of the notifier block (an operation which takes the rwsem), and the notifier code itself which takes the locks in the reverse order: ====================================================== [ INFO: possible circular locking dependency detected ] 3.18.0+ #1453 Not tainted ------------------------------------------------------- rc.local/770 is trying to acquire lock: (cooling_cpufreq_lock){+.+.+.}, at: [<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc but task is already holding lock: ((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((cpufreq_policy_notifier_list).rwsem){++++.+}: [<c06bc3b0>] down_write+0x44/0x9c [<c0043444>] blocking_notifier_chain_register+0x28/0xd8 [<c04ad610>] cpufreq_register_notifier+0x68/0x90 [<c04abe4c>] __cpufreq_cooling_register.part.1+0x120/0x180 [<c04abf44>] __cpufreq_cooling_register+0x98/0xa4 [<c04abf8c>] cpufreq_cooling_register+0x18/0x1c [<bf0046f8>] imx_thermal_probe+0x1c0/0x470 [imx_thermal] [<c037cef8>] platform_drv_probe+0x50/0xac [<c037b710>] driver_probe_device+0x114/0x234 [<c037b8cc>] __driver_attach+0x9c/0xa0 [<c0379d68>] bus_for_each_dev+0x5c/0x90 [<c037b204>] driver_attach+0x24/0x28 [<c037ae7c>] bus_add_driver+0xe0/0x1d8 [<c037c0cc>] driver_register+0x80/0xfc [<c037cd80>] __platform_driver_register+0x50/0x64 [<bf007018>] 0xbf007018 [<c0008a5c>] do_one_initcall+0x88/0x1d8 [<c0095da4>] load_module+0x1768/0x1ef8 [<c0096614>] SyS_init_module+0xe0/0xf4 [<c000ec00>] ret_fast_syscall+0x0/0x48 -> #0 (cooling_cpufreq_lock){+.+.+.}: [<c00619f8>] lock_acquire+0xb0/0x124 [<c06ba3b4>] mutex_lock_nested+0x5c/0x3d8 [<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc [<c0042bf4>] notifier_call_chain+0x4c/0x8c [<c0042f20>] __blocking_notifier_call_chain+0x50/0x68 [<c0042f58>] blocking_notifier_call_chain+0x20/0x28 [<c04ae62c>] cpufreq_set_policy+0x7c/0x1d0 [<c04af3cc>] store_scaling_governor+0x74/0x9c [<c04ad418>] store+0x90/0xc0 [<c0175384>] sysfs_kf_write+0x54/0x58 [<c01746b4>] kernfs_fop_write+0xdc/0x190 [<c010dcc0>] vfs_write+0xac/0x1b4 [<c010dfec>] SyS_write+0x44/0x90 [<c000ec00>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((cpufreq_policy_notifier_list).rwsem); lock(cooling_cpufreq_lock); lock((cpufreq_policy_notifier_list).rwsem); lock(cooling_cpufreq_lock); *** DEADLOCK *** 7 locks held by rc.local/770: #0: (sb_writers#6){.+.+.+}, at: [<c010dda0>] vfs_write+0x18c/0x1b4 #1: (&of->mutex){+.+.+.}, at: [<c0174678>] kernfs_fop_write+0xa0/0x190 #2: (s_active#52){.+.+.+}, at: [<c0174680>] kernfs_fop_write+0xa8/0x190 #3: (cpu_hotplug.lock){++++++}, at: [<c0026a60>] get_online_cpus+0x34/0x90 #4: (cpufreq_rwsem){.+.+.+}, at: [<c04ad3e0>] store+0x58/0xc0 #5: (&policy->rwsem){+.+.+.}, at: [<c04ad3f8>] store+0x70/0xc0 #6: ((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68 stack backtrace: CPU: 0 PID: 770 Comm: rc.local Not tainted 3.18.0+ #1453 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c00121c8>] (dump_backtrace) from [<c0012360>] (show_stack+0x18/0x1c) r6:c0b85a80 r5:c0b75630 r4:00000000 r3:00000000 [<c0012348>] (show_stack) from [<c06b6c48>] (dump_stack+0x7c/0x98) [<c06b6bcc>] (dump_stack) from [<c06b42a4>] (print_circular_bug+0x28c/0x2d8) r4:c0b85a80 r3:d0071d40 [<c06b4018>] (print_circular_bug) from [<c00613b0>] (__lock_acquire+0x1acc/0x1bb0) r10:c0b50660 r8:c09e6d80 r7:d0071d40 r6:c11d0f0c r5:00000007 r4:d0072240 [<c005f8e4>] (__lock_acquire) from [<c00619f8>] (lock_acquire+0xb0/0x124) r10:00000000 r9:c04abfc4 r8:00000000 r7:00000000 r6:00000000 r5:c0a06f0c r4:00000000 [<c0061948>] (lock_acquire) from [<c06ba3b4>] (mutex_lock_nested+0x5c/0x3d8) r10:ec853800 r9:c0a06ed4 r8:d0071d40 r7:c0a06ed4 r6:c11d0f0c r5:00000000 r4:c04abfc4 [<c06ba358>] (mutex_lock_nested) from [<c04abfc4>] (cpufreq_thermal_notifier+0x34/0xfc) r10:ec853800 r9:ec85380c r8:d00d7d3c r7:c0a06ed4 r6:d00d7d3c r5:00000000 r4:fffffffe [<c04abf90>] (cpufreq_thermal_notifier) from [<c0042bf4>] (notifier_call_chain+0x4c/0x8c) r7:00000000 r6:00000000 r5:00000000 r4:fffffffe [<c0042ba8>] (notifier_call_chain) from [<c0042f20>] (__blocking_notifier_call_chain+0x50/0x68) r8:c0a072a4 r7:00000000 r6:d00d7d3c r5:ffffffff r4:c0a06fc8 r3:ffffffff [<c0042ed0>] (__blocking_notifier_call_chain) from [<c0042f58>] (blocking_notifier_call_chain+0x20/0x28) r7:ec98b540 r6:c13ebc80 r5:ed76e600 r4:d00d7d3c [<c0042f38>] (blocking_notifier_call_chain) from [<c04ae62c>] (cpufreq_set_policy+0x7c/0x1d0) [<c04ae5b0>] (cpufreq_set_policy) from [<c04af3cc>] (store_scaling_governor+0x74/0x9c) r7:ec98b540 r6:0000000c r5:ec98b540 r4:ed76e600 [<c04af358>] (store_scaling_governor) from [<c04ad418>] (store+0x90/0xc0) r6:0000000c r5:ed76e6d4 r4:ed76e600 [<c04ad388>] (store) from [<c0175384>] (sysfs_kf_write+0x54/0x58) r8:0000000c r7:d00d7f78 r6:ec98b540 r5:0000000c r4:ec853800 r3:0000000c [<c0175330>] (sysfs_kf_write) from [<c01746b4>] (kernfs_fop_write+0xdc/0x190) r6:ec98b540 r5:00000000 r4:00000000 r3:c0175330 [<c01745d8>] (kernfs_fop_write) from [<c010dcc0>] (vfs_write+0xac/0x1b4) r10:0162aa70 r9:d00d6000 r8:0000000c r7:d00d7f78 r6:0162aa70 r5:0000000c r4:eccde500 [<c010dc14>] (vfs_write) from [<c010dfec>] (SyS_write+0x44/0x90) r10:0162aa70 r8:0000000c r7:eccde500 r6:eccde500 r5:00000000 r4:00000000 [<c010dfa8>] (SyS_write) from [<c000ec00>] (ret_fast_syscall+0x0/0x48) r10:00000000 r8:c000edc4 r7:00000004 r6:000216cc r5:0000000c r4:0162aa70 Solve this by moving to finer grained locking - use one mutex to protect the cpufreq_dev_list as a whole, and a separate lock to ensure correct ordering of cpufreq notifier registration and removal. cooling_list_lock is taken within cooling_cpufreq_lock on (un)registration to preserve the behavior of the code, i.e. to atomically add/remove to the list and (un)register the notifier. Fixes: 2dcd851fe4b4 ("thermal: cpu_cooling: Update always cpufreq policy with Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-13thermal: power_allocator: do not use devm* interfacesDmitry Torokhov1-4/+4
The code in question is called outside of standard driver probe()/remove() callbacks and thus will not benefit from use of devm* infrastructure. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-13x86: fix error handling for 32-bit compat out-of-range system call numbersLinus Torvalds1-1/+2
Commit 3f5159a9221f ("x86/asm/entry/32: Update -ENOSYS handling to match the 64-bit logic") broke the ENOSYS handling for the 32-bit compat case. The proper error return value was never loaded into %rax, except if things just happened to go through the audit paths, which ended up reloading the return value. This moves the loading or %rax into the normal system call path, just to make sure the error case triggers it. It's kind of sad, since it adds a useless instruction to reload the register to the fast path, but it's not like that single load from the stack is going to be noticeable. Reported-by: David Drysdale <drysdale@google.com> Tested-by: Kees Cook <keescook@chromium.org> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-13Revert x86 sigcontext cleanupsLinus Torvalds3-36/+17
This reverts commits 9a036b93a344 ("x86/signal/64: Remove 'fs' and 'gs' from sigcontext") and c6f2062935c8 ("x86/signal/64: Fix SS handling for signals delivered to 64-bit programs"). They were cleanups, but they break dosemu by changing the signal return behavior (and removing 'fs' and 'gs' from the sigcontext struct - while not actually changing any behavior - causes build problems). Reported-and-tested-by: Stas Sergeev <stsp@list.ru> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-13EDAC, ppc4xx: Access mci->csrows array elements properlyMichael Walle1-1/+1
The commit de3910eb79ac ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: <stable@vger.kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc Signed-off-by: Borislav Petkov <bp@suse.de>
2015-08-12cosa: missing error code on failure in probe()Dan Carpenter1-1/+2
If register_hdlc_device() fails, the current code returns 0 but we should return an error code instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12gianfar: remove faulty filer optimizerJakub Kicinski1-337/+0
Current filer rule optimization is broken in several ways: (1) Can perform reads/writes beyond end of allocated tables. (gianfar_ethtool.c:1326). (2) It breaks badly for rules with more than 2 specifiers (e.g. matching ip, port, tos). Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003 05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003 06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002 08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002 09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001 0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 (Entire cluster gets AND-ed together). (3) We observed that the masking rules it generates do not play well with clustering on P2020. Only first rule of the cluster would ever fire. Given that optimizer relies heavily on masking this is very hard to fix. Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003 05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002 07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 Which looks correct according to the spec but only the first (eth id 252)/last added rule for 10.0.0.3 will ever trigger. As if filer did not treat the AND CLE as cluster start but also kept AND-ing the rules. We found no errata covering this. The fact that nobody noticed (2) or (3) makes me think that this feature is not very widely used and we should just remove it. Reported-by: Aleksander Dutkowski <adutkowski@gmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12gianfar: correct list membership accountingJakub Kicinski1-1/+2
At a cost of one line let's make sure .count is correct when calling gfar_process_filer_changes(). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12gianfar: correct filer table writingJakub Kicinski1-3/+2
MAX_FILER_IDX is the last usable index. Using less-than will already guarantee that one entry for catch-all rule will be left, no need to subtract 1 here. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12bonding: Gratuitous ARP gets dropped when first slave addedVenkat Venkatsubra1-0/+1
When the first slave is added (such as during bootup) the first gratuitous ARP gets dropped. We don't see this drop during a failover. The packet gets dropped in qdisc (noop_enqueue). The fix is to delay the sending of gratuitous ARPs till the bond dev's carrier is present. It can also be worked around by setting num_grat_arp to more than 1. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12net: dsa: Do not override PHY interface if already configuredFlorian Fainelli1-1/+2
In case we need to divert reads/writes using the slave MII bus, we may have already fetched a valid PHY interface property from Device Tree, and that mode is used by the PHY driver to make configuration decisions. If we could not fetch the "phy-mode" property, we will assign p->phy_interface to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as to whether or not we should override the interface value. Fixes: 19334920eaf7 ("net: dsa: Set valid phy interface type") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12drm/radeon: add new OLAND pci idAlex Deucher1-0/+1
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-08-12Revert "drm/amdgpu: Configure doorbell to maximum slots"Alex Deucher1-1/+1
This reverts commit 78ad5cdd21f0d614983fc397338944e797ec70b9. This commit breaks dpm and suspend/resume on CZ.
2015-08-12drm/amdgpu: add context buffer size check for HEVCBoyuan Zhang1-3/+14
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-08-12dm cache policy smq: move 'dm-cache-default' module alias to SMQYi Zhang2-2/+2
When creating dm-cache with the default policy, it will call request_module("dm-cache-default") to register the default policy. But the "dm-cache-default" alias was left referring to the MQ policy. Fix this by moving the module alias to SMQ. Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq) Signed-off-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12dm btree: add ref counting ops for the leaves of top level btreesJoe Thornber4-16/+50
When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-08-12dm thin metadata: delete btrees when releasing metadata snapshotJoe Thornber1-2/+2
The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-08-11localmodconfig: Use Kbuild files tooRichard Weinberger1-1/+1
In kbuild it is allowed to define objects in files named "Makefile" and "Kbuild". Currently localmodconfig reads objects only from "Makefile"s and misses modules like nouveau. Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at Cc: stable@vger.kernel.org Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-08-11net: fs_enet: mask interrupts for TX partial frames.LEROY Christophe1-1/+1
We are not interested in interrupts for partially transmitted frames. Unlike SCC and FCC, the FEC doesn't handle the I bit in buffer descriptors, instead it defines two interrupt bits, TXB and TXF. We have to mask TXB in order to only get interrupts once the frame is fully transmitted. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11net: fs_enet: explicitly remove I flag on TX partial framesLEROY Christophe1-1/+2
We are not interested in interrupts for partially transmitted frames, we have to clear BD_ENET_TX_INTR explicitly otherwise it may remain from a previously used descriptor. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11ARM: 8410/1: VDSO: fix coarse clock monotonicity regressionNathan Lynch1-4/+3
Since 906c55579a63 ("timekeeping: Copy the shadow-timekeeper over the real timekeeper last") it has become possible on ARM to: - Obtain a CLOCK_MONOTONIC_COARSE or CLOCK_REALTIME_COARSE timestamp via syscall. - Subsequently obtain a timestamp for the same clock ID via VDSO which predates the first timestamp (by one jiffy). This is because ARM's update_vsyscall is deriving the coarse time using the __current_kernel_time interface, when it should really be using the timekeeper object provided to it by the timekeeping core. It happened to work before only because __current_kernel_time would access the same timekeeper object which had been passed to update_vsyscall. This is no longer the case. Cc: stable@vger.kernel.org Fixes: 906c55579a63 ("timekeeping: Copy the shadow-timekeeper over the real timekeeper last") Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-11xen/xenbus: Don't leak memory when unmapping the ring on HVM backendJulien Grall1-1/+3
The commit ccc9d90a9a8b5c4ad7e9708ec41f75ff9e98d61d "xenbus_client: Extend interface to support multi-page ring" removes the call to free_xenballooned_pages() in xenbus_unmap_ring_vfree_hvm(), leaking a page for every shared ring. Only with backends running in HVM domains were affected. Signed-off-by: Julien Grall <julien.grall@citrix.com> Cc: <stable@vger.kernel.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-11Revert "xen/events/fifo: Handle linked events when closing a port"David Vrabel3-53/+9
This reverts commit fcdf31a7c162de0c93a2bee51df4688ab0a348f8. This was causing a WARNING whenever a PIRQ was closed since shutdown_pirq() is called with irqs disabled. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-08-10inet: fix possible request socket leakEric Dumazet2-2/+2
In commit b357a364c57c9 ("inet: fix possible panic in reqsk_queue_unlink()"), I missed fact that tcp_check_req() can return the listener socket in one case, and that we must release the request socket refcount or we leak it. Tested: Following packetdrill test template shows the issue 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.002 < . 1:1(0) ack 21 win 2920 +0 > R 21:21(0) Fixes: b357a364c57c9 ("inet: fix possible panic in reqsk_queue_unlink()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10inet: fix races with reqsk timersEric Dumazet2-2/+8
reqsk_queue_destroy() and reqsk_queue_unlink() should use del_timer_sync() instead of del_timer() before calling reqsk_put(), otherwise we could free a req still used by another cpu. But before doing so, reqsk_queue_destroy() must release syn_wait_lock spinlock or risk a dead lock, as reqsk_timer_handler() might need to take this same spinlock from reqsk_queue_unlink() (called from inet_csk_reqsk_queue_drop()) Fixes: fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10mkiss: Fix error handling in mkiss_open()Fabio Estevam1-3/+4
If register_netdev() fails we are not propagating the error and we return success because ax_open() succeeded previously. Fix this by checking the return value of ax_open() and register_netdev() and propagate the error in case of failure. Reported-by: RUC_Soft_Sec <zy900702@163.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10HID: wacom: Report correct device resolution when using the wireless adapaterJason Gerecke1-33/+37
The 'wacom_wireless_work' function does not recalculate the tablet's resolution, causing the value contained in the 'features' struct to always be reported to userspace. This value is valid only for the pen interface, meaning that the value will be incorrect for the touchpad (if present). This in particular causes problems for libinput which relies on the reported resolution being correct. This patch adds the necessary calls to recalculate the resolution for each interface. This requires a little bit of code shuffling since both the 'wacom_set_default_phy' and 'wacom_calculate_res' are declared below their new first point of use in 'wacom_wireless_work'. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-10bnx2x: Free NVRAM lock at end of each pageYuval Mintz1-0/+16
Writing each 4Kb page into flash might take up-to ~100 miliseconds, during which time management firmware cannot acces the nvram for its own uses. Firmware upgrade utility use the ethtool API to burn new flash images for the device via the ethtool API, doing so by writing several page-worth of data on each command. Such action might create problems for the management firmware, as the nvram might not be accessible for a long time. This patch changes the write implementation, releasing the nvram lock on the completion of each page, allowing the management firmware time to claim it and perform its own required actions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10bnx2x: Prevent null pointer dereference on SKB releaseYuval Mintz1-1/+1
On error flows its possible to free an SKB even if it was not allocated. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10cxgb4: missing curly braces in t4_setup_debugfs()Dan Carpenter1-1/+2
There were missing curly braces so it means we call add_debugfs_mem() unintentionally. Fixes: 3ccc6cf74d8c ('cxgb4: Adds support for T6 adapter') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10net-timestamp: Update skb_complete_tx_timestamp commentBenjamin Poirier1-3/+3
After "62bccb8 net-timestamp: Make the clone operation stand-alone from phy timestamping" the hwtstamps parameter of skb_complete_tx_timestamp() may no longer be NULL. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10ipv6: don't reject link-local nexthop on other interfaceFlorian Westphal1-2/+4
48ed7b26faa7 ("ipv6: reject locally assigned nexthop addresses") is too strict; it rejects following corner-case: ip -6 route add default via fe80::1:2:3 dev eth1 [ where fe80::1:2:3 is assigned to a local interface, but not eth1 ] Fix this by restricting search to given device if nh is linklocal. Joint work with Hannes Frederic Sowa. Fixes: 48ed7b26faa7 ("ipv6: reject locally assigned nexthop addresses") Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10netlink: make sure -EBUSY won't escape from netlink_insertDaniel Borkmann1-0/+5
Linus reports the following deadlock on rtnl_mutex; triggered only once so far (extract): [12236.694209] NetworkManager D 0000000000013b80 0 1047 1 0x00000000 [12236.694218] ffff88003f902640 0000000000000000 ffffffff815d15a9 0000000000000018 [12236.694224] ffff880119538000 ffff88003f902640 ffffffff81a8ff84 00000000ffffffff [12236.694230] ffffffff81a8ff88 ffff880119c47f00 ffffffff815d133a ffffffff81a8ff80 [12236.694235] Call Trace: [12236.694250] [<ffffffff815d15a9>] ? schedule_preempt_disabled+0x9/0x10 [12236.694257] [<ffffffff815d133a>] ? schedule+0x2a/0x70 [12236.694263] [<ffffffff815d15a9>] ? schedule_preempt_disabled+0x9/0x10 [12236.694271] [<ffffffff815d2c3f>] ? __mutex_lock_slowpath+0x7f/0xf0 [12236.694280] [<ffffffff815d2cc6>] ? mutex_lock+0x16/0x30 [12236.694291] [<ffffffff814f1f90>] ? rtnetlink_rcv+0x10/0x30 [12236.694299] [<ffffffff8150ce3b>] ? netlink_unicast+0xfb/0x180 [12236.694309] [<ffffffff814f5ad3>] ? rtnl_getlink+0x113/0x190 [12236.694319] [<ffffffff814f202a>] ? rtnetlink_rcv_msg+0x7a/0x210 [12236.694331] [<ffffffff8124565c>] ? sock_has_perm+0x5c/0x70 [12236.694339] [<ffffffff814f1fb0>] ? rtnetlink_rcv+0x30/0x30 [12236.694346] [<ffffffff8150d62c>] ? netlink_rcv_skb+0x9c/0xc0 [12236.694354] [<ffffffff814f1f9f>] ? rtnetlink_rcv+0x1f/0x30 [12236.694360] [<ffffffff8150ce3b>] ? netlink_unicast+0xfb/0x180 [12236.694367] [<ffffffff8150d344>] ? netlink_sendmsg+0x484/0x5d0 [12236.694376] [<ffffffff810a236f>] ? __wake_up+0x2f/0x50 [12236.694387] [<ffffffff814cad23>] ? sock_sendmsg+0x33/0x40 [12236.694396] [<ffffffff814cb05e>] ? ___sys_sendmsg+0x22e/0x240 [12236.694405] [<ffffffff814cab75>] ? ___sys_recvmsg+0x135/0x1a0 [12236.694415] [<ffffffff811a9d12>] ? eventfd_write+0x82/0x210 [12236.694423] [<ffffffff811a0f9e>] ? fsnotify+0x32e/0x4c0 [12236.694429] [<ffffffff8108cb70>] ? wake_up_q+0x60/0x60 [12236.694434] [<ffffffff814cba09>] ? __sys_sendmsg+0x39/0x70 [12236.694440] [<ffffffff815d4797>] ? entry_SYSCALL_64_fastpath+0x12/0x6a It seems so far plausible that the recursive call into rtnetlink_rcv() looks suspicious. One way, where this could trigger is that the senders NETLINK_CB(skb).portid was wrongly 0 (which is rtnetlink socket), so the rtnl_getlink() request's answer would be sent to the kernel instead to the actual user process, thus grabbing rtnl_mutex() twice. One theory would be that netlink_autobind() triggered via netlink_sendmsg() internally overwrites the -EBUSY error to 0, but where it is wrongly originating from __netlink_insert() instead. That would reset the socket's portid to 0, which is then filled into NETLINK_CB(skb).portid later on. As commit d470e3b483dc ("[NETLINK]: Fix two socket hashing bugs.") also puts it, -EBUSY should not be propagated from netlink_insert(). It looks like it's very unlikely to reproduce. We need to trigger the rhashtable_insert_rehash() handler under a situation where rehashing currently occurs (one /rare/ way would be to hit ht->elasticity limits while not filled enough to expand the hashtable, but that would rather require a specifically crafted bind() sequence with knowledge about destination slots, seems unlikely). It probably makes sense to guard __netlink_insert() in any case and remap that error. It was suggested that EOVERFLOW might be better than an already overloaded ENOMEM. Reference: http://thread.gmane.org/gmane.linux.network/372676 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10bna: fix interrupts storm caused by erroneous packetsIvan Vecera1-1/+1
The commit "e29aa33 bna: Enable Multi Buffer RX" moved packets counter increment from the beginning of the NAPI processing loop after the check for erroneous packets so they are never accounted. This counter is used to inform firmware about number of processed completions (packets). As these packets are never acked the firmware fires IRQs for them again and again. Fixes: e29aa33 ("bna: Enable Multi Buffer RX") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10net: mvpp2: replace TX coalescing interrupts with hrtimerMarcin Wojtas1-47/+130
The PP2 controller is capable of per-CPU TX processing, which means there are per-CPU banked register sets and queues. Current version of the driver supports TX packet coalescing - once on given CPU sent packets amount reaches a threshold value, an IRQ occurs. However, there is a single interrupt line responsible for CPU0/1 TX and RX events (the latter is not per-CPU, the hardware does not support RSS). When the top-half executes the interrupt cause is not known. This is why in NAPI poll function, along with RX processing, IRQ cause register on both CPU's is accessed in order to determine on which of them the TX coalescing threshold might have been reached. Thus the egress processing and releasing the buffers is able to take place on the corresponding CPU. Hitherto approach lead to an illegal usage of on_each_cpu function in softirq context. The problem is solved by resigning from TX coalescing interrupts and separating egress finalization from NAPI processing. For that purpose a method of using hrtimer is introduced. In main transmit function (mvpp2_tx) buffers are released once a software coalescing threshold is reached. In case not all the data is processed a timer is set on this CPU - in its interrupt context a tasklet is scheduled in which all queues are processed. At once only one timer per-CPU can be running, which is controlled by a dedicated flag. This commit removes TX processing from NAPI polling function, disables hardware coalescing and enables hrtimer with tasklet, using new per-CPU port structure (mvpp2_port_pcpu). Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10net: mvpp2: enable proper per-CPU TX buffers unmappingMarcin Wojtas1-15/+37
mvpp2 driver allows usage of per-CPU TX processing. Once the packets are prepared independetly on each CPU, the hardware enqueues the descriptors in common TX queue. After they are sent, the buffers and associated sk_buffs should be released on the corresponding CPU. This is why a special index is maintained in order to point to the right data to be released after transmission takes place. Each per-CPU TX queue comprise an array of sent sk_buffs, freed in mvpp2_txq_bufs_free function. However, the index was used there also for obtaining a descriptor (and therefore a buffer to be DMA-unmapped) from common TX queue, which was wrong, because it was not referring to the current CPU. This commit enables proper unmapping of sent data buffers by indexing them in per-CPU queues using a dedicated array for keeping their physical addresses. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10net: mvpp2: remove excessive spinlocks from driver initializationMarcin Wojtas1-15/+0
Using spinlocks protection during one-time driver initialization is not necessary. Moreover it resulted in invalid GFP_KERNEL allocation under the lock. This commit removes redundant spinlocks from buffer manager part of mvpp2 initialization. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reported-by: Alexandre Fournier <alexandre.fournier@wisp-e.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10arm64: VDSO: fix coarse clock monotonicity regressionNathan Lynch1-4/+3
Since 906c55579a63 ("timekeeping: Copy the shadow-timekeeper over the real timekeeper last") it has become possible on arm64 to: - Obtain a CLOCK_MONOTONIC_COARSE or CLOCK_REALTIME_COARSE timestamp via syscall. - Subsequently obtain a timestamp for the same clock ID via VDSO which predates the first timestamp (by one jiffy). This is because arm64's update_vsyscall is deriving the coarse time using the __current_kernel_time interface, when it should really be using the timekeeper object provided to it by the timekeeping core. It happened to work before only because __current_kernel_time would access the same timekeeper object which had been passed to update_vsyscall. This is no longer the case. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-08-10x86/xen: build "Xen PV" APIC driver for domU as wellJason A. Donenfeld2-6/+4
It turns out that a PV domU also requires the "Xen PV" APIC driver. Otherwise, the flat driver is used and we get stuck in busy loops that never exit, such as in this stack trace: (gdb) target remote localhost:9999 Remote debugging using localhost:9999 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56 56 while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY) (gdb) bt #0 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56 #1 __default_send_IPI_shortcut (shortcut=<optimized out>, dest=<optimized out>, vector=<optimized out>) at ./arch/x86/include/asm/ipi.h:75 #2 apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54 #3 0xffffffff81011336 in arch_irq_work_raise () at arch/x86/kernel/irq_work.c:47 #4 0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at kernel/irq_work.c:100 #5 0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633 #6 0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>, fmt=<optimized out>, args=<optimized out>) at kernel/printk/printk.c:1778 #7 0xffffffff816010c8 in printk (fmt=<optimized out>) at kernel/printk/printk.c:1868 #8 0xffffffffc00013ea in ?? () #9 0x0000000000000000 in ?? () Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-10fbcon: unconditionally initialize cursor blink intervalScot Doyle1-1/+2
A sun7i-a20-olinuxino-micro fails to boot when kernel parameter vt.global_cursor_default=0. The value is copied to vc->vc_deccm causing the initialization of ops->cur_blink_jiffies to be skipped. Unconditionally initialize it. Reported-and-tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-10video: Fix possible leak in of_get_videomode()Christian Engelmayer1-3/+1
In case videomode_from_timings() fails in function of_get_videomode(), the allocated display timing data is not freed in the exit path. Make sure that display_timings_release() is called in any case. Detected by Coverity CID 1309681. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-10netfilter: SYNPROXY: fix sending window update to clientPhil Sutter2-2/+4
Upon receipt of SYNACK from the server, ipt_SYNPROXY first sends back an ACK to finish the server handshake, then calls nf_ct_seqadj_init() to initiate sequence number adjustment of forwarded packets to the client and finally sends a window update to the client to unblock it's TX queue. Since synproxy_send_client_ack() does not set synproxy_send_tcp()'s nfct parameter, no sequence number adjustment happens and the client receives the window update with incorrect sequence number. Depending on client TCP implementation, this leads to a significant delay (until a window probe is being sent). Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-10netfilter: ip6t_SYNPROXY: fix NULL pointer dereferencePhil Sutter1-8/+10
This happens when networking namespaces are enabled. Suggested-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-10video: fbdev: pxa3xx_gcu: prepare the clocksRobert Jarzmik1-2/+2
The clocks need to be prepared before being enabled. Without it a warning appears in the drivers probe path : WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:707 clk_core_enable+0x84/0xa0() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0-rc3-cm-x300+ #804 Hardware name: CM-X300 module [<c000ed50>] (unwind_backtrace) from [<c000ce08>] (show_stack+0x10/0x14) [<c000ce08>] (show_stack) from [<c0017eb4>] (warn_slowpath_common+0x7c/0xb4) [<c0017eb4>] (warn_slowpath_common) from [<c0017f88>] (warn_slowpath_null+0x1c/0x24) [<c0017f88>] (warn_slowpath_null) from [<c02d30dc>] (clk_core_enable+0x84/0xa0) [<c02d30dc>] (clk_core_enable) from [<c02d3118>] (clk_enable+0x20/0x34) [<c02d3118>] (clk_enable) from [<c0200dfc>] (pxa3xx_gcu_probe+0x148/0x338) [<c0200dfc>] (pxa3xx_gcu_probe) from [<c022eccc>] (platform_drv_probe+0x30/0x94) Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-10OMAPDSS: Fix omap_dss_find_output_by_port_node() port refcount decrementJyri Sarha1-1/+1
Fix omap_dss_find_output_by_port_node() port parameter refcount decrementation. The only user of dss_of_port_get_parent_device() function is omap_dss_find_output_by_port_node() and it assumes the refcount of the port parameter is not decremented by the call. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-08-10OMAPDSS: Fix node refcount leak in omapdss_of_get_next_port()Jyri Sarha1-0/+2
Fix node refcount leak in omapdss_of_get_next_port(). Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.