aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2025-03-06cpufreq/amd-pstate-ut: Adjust variable scopeMario Limonciello1-2/+2
In amd_pstate_ut_check_freq() and amd_pstate_ut_check_perf() the cpudata variable is only needed in the scope of the for loop. Move it there. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate-ut: Run on all of the correct CPUsMario Limonciello1-4/+4
If a CPU is missing a policy or one has been offlined then the unit test is skipped for the rest of the CPUs on the system. Instead; iterate online CPUs and skip any missing policies to allow continuing to test the rest of them. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enumsMario Limonciello1-88/+55
Enums are effectively used as a boolean and don't show the return value of the failing call. Instead of using enums switch to returning the actual return code from the unit test. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the sameMario Limonciello1-2/+2
Several Ryzen AI processors support the exact same value for lowest nonlinear perf and lowest perf. Loosen up the unit tests to allow this scenario. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate-ut: Use _free macro to free put policyMario Limonciello1-19/+14
Using a scoped cleanup macro simplifies cleanup code. Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate: Drop `cppc_cap1_cached`Mario Limonciello2-7/+0
The `cppc_cap1_cached` variable isn't used at all, there is no need to read it at initialization for each CPU. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate: Overhaul lockingMario Limonciello1-10/+3
amd_pstate_cpu_boost_update() and refresh_frequency_limits() both update the policy state and have nothing to do with the amd-pstate driver itself. A global "limits" lock doesn't make sense because each CPU can have policies changed independently. Each time a CPU changes values they will atomically be written to the per-CPU perf member. Drop per CPU locking cases. The remaining "global" driver lock is used to ensure that only one entity can change driver modes at a given time. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate: Move perf values into a unionMario Limonciello3-120/+162
By storing perf values in a union all the writes and reads can be done atomically, removing the need for some concurrency protections. While making this change, also drop the cached frequency values, using inline helpers to calculate them on demand from perf value. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate: Drop min and max cached frequenciesMario Limonciello3-46/+20
Use the perf_to_freq helpers to calculate this on the fly. As the members are no longer cached add an extra check into amd_pstate_epp_update_limit() to avoid unnecessary calls in amd_pstate_update_min_max_limit(). Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate: Show a warning when a CPU fails to setupMario Limonciello1-0/+2
I came across a system that MSR_AMD_CPPC_CAP1 for some CPUs isn't populated. This is an unexpected behavior that is most likely a BIOS bug. In the event it happens I'd like users to report bugs to properly root cause and get this fixed. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate: Invalidate cppc_req_cached during suspendMario Limonciello1-1/+4
During resume it's possible the firmware didn't restore the CPPC request MSR but the kernel thinks the values line up. This leads to incorrect performance after resume from suspend. To fix the issue invalidate the cached value at suspend. During resume use the saved values programmed as cached limits. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reported-by: Miroslav Pavleski <miroslav@pavleski.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-03-06cpufreq/amd-pstate: Fix the clamping of perf valuesDhananjay Ugwekar1-2/+2
The clamping in freq_to_perf() is broken right now, as we first typecast (read wraparound) the overflowing value into a u8 and then clamp it down. So, use a u32 to store the >255 value in certain edge cases and then clamp it down into a u8. Also, use a "explicit typecast + clamp" instead of just a "clamp_t" as the latter typecasts first and then clamps between the limits, which defeats our purpose. Fixes: 620136ced35a ("cpufreq/amd-pstate: Modularize perf<->freq conversion") Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250222033221.554976-1-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Remove the unncecessary driver_lock in amd_pstate_update_limitsDhananjay Ugwekar1-2/+0
There is no need to take a driver wide lock while updating the highest_perf value in the percpu cpudata struct. Hence remove it. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-13-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Use scope based cleanup for cpufreq_policy refsDhananjay Ugwekar2-17/+11
There have been instances in past where refcount decrementing is missed while exiting a function. Use automatic scope based cleanup to avoid such errors. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-12-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Add missing NULL ptr check in amd_pstate_updateDhananjay Ugwekar1-0/+3
Check if policy is NULL before dereferencing it in amd_pstate_update. Fixes: e8f555daacd3 ("cpufreq/amd-pstate: fix setting policy current frequency value") Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-11-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Remove the unnecessary cpufreq_update_policy callDhananjay Ugwekar1-4/+0
The update_limits callback is only called in two conditions. * When the preferred core rankings change. In which case, we just need to change the prefcore ranking in the cpudata struct. As there are no changes to any of the perf values, there is no need to call cpufreq_update_policy() * When the _PPC ACPI object changes, i.e. the highest allowed Pstate changes. The _PPC object is only used for a table based cpufreq driver like acpi-cpufreq, hence is irrelevant for CPPC based amd-pstate. Hence, the cpufreq_update_policy() call becomes unnecessary and can be removed. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-9-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Modularize perf<->freq conversionDhananjay Ugwekar1-27/+30
Delegate the perf<->frequency conversion to helper functions to reduce code duplication, and improve readability. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-8-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Convert all perf values to u8Dhananjay Ugwekar3-62/+62
All perf values are always within 0-255 range, hence convert their datatype to u8 everywhere. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-7-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Pass min/max_limit_perf as min/max_perf to amd_pstate_updateDhananjay Ugwekar1-5/+4
Currently, amd_pstate_update_freq passes the hardware perf limits as min/max_perf to amd_pstate_update, which eventually gets programmed into the min/max_perf fields of the CPPC_REQ register. Instead pass the effective perf limits i.e. min/max_limit_perf values to amd_pstate_update as min/max_perf. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-6-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Remove the redundant des_perf clamping in adjust_perfDhananjay Ugwekar1-2/+0
des_perf is later on clamped between min_perf and max_perf in amd_pstate_update. So, remove the redundant clamping from amd_pstate_adjust_perf. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-5-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23cpufreq/amd-pstate: Modify the min_perf calculation in adjust_perf callbackDhananjay Ugwekar1-6/+6
Instead of setting a fixed floor at lowest_nonlinear_perf, use the min_limit_perf value, so that it gives the user the freedom to lower the floor further. There are two minimum frequency/perf limits that we need to consider in the adjust_perf callback. One provided by schedutil i.e. the sg_cpu->bw_min value passed in _min_perf arg, another is the effective value of min_freq_qos request that is updated in cpudata->min_limit_perf. Modify the code to use the bigger of these two values. Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20250205112523.201101-4-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23Linux 6.14-rc4Linus Torvalds1-1/+1
2025-02-22i2c: core: Allocate temporary client dynamicallyGeert Uytterhoeven1-5/+10
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’: drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2544 | } | ^ Fix this by allocating the temporary client structure dynamically, as it is a rather large structure (1216 bytes, depending on kernel config). This is basically a revert of the to-be-fixed commit with some checkpatch improvements. Fixes: 735668f8e5c9 ("i2c: core: Allocate temp client on the stack in i2c_detect") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Su Hui <suhui@nfschina.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [wsa: updated commit message, merged tags from similar patch] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-02-21tracing: Fix memory leak when reading set_event fileAdrian Huang1-2/+9
kmemleak reports the following memory leak after reading set_event file: # cat /sys/kernel/tracing/set_event # cat /sys/kernel/debug/kmemleak unreferenced object 0xff110001234449e0 (size 16): comm "cat", pid 13645, jiffies 4294981880 hex dump (first 16 bytes): 01 00 00 00 00 00 00 00 a8 71 e7 84 ff ff ff ff .........q...... backtrace (crc c43abbc): __kmalloc_cache_noprof+0x3ca/0x4b0 s_start+0x72/0x2d0 seq_read_iter+0x265/0x1080 seq_read+0x2c9/0x420 vfs_read+0x166/0xc30 ksys_read+0xf4/0x1d0 do_syscall_64+0x79/0x150 entry_SYSCALL_64_after_hwframe+0x76/0x7e The issue can be reproduced regardless of whether set_event is empty or not. Here is an example about the valid content of set_event. # cat /sys/kernel/tracing/set_event sched:sched_process_fork sched:sched_switch sched:sched_wakeup *:*:mod:trace_events_sample The root cause is that s_next() returns NULL when nothing is found. This results in s_stop() attempting to free a NULL pointer because its parameter is NULL. Fix the issue by freeing the memory appropriately when s_next() fails to find anything. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250220031528.7373-1-ahuang12@lenovo.com Fixes: b355247df104 ("tracing: Cache ":mod:" events for modules not loaded yet") Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-21ftrace: Correct preemption accounting for function tracing.Sebastian Andrzej Siewior1-4/+2
The function tracer should record the preemption level at the point when the function is invoked. If the tracing subsystem decrement the preemption counter it needs to correct this before feeding the data into the trace buffer. This was broken in the commit cited below while shifting the preempt-disabled section. Use tracing_gen_ctx_dec() which properly subtracts one from the preemption counter on a preemptible kernel. Cc: stable@vger.kernel.org Cc: Wander Lairson Costa <wander@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/20250220140749.pfw8qoNZ@linutronix.de Fixes: ce5e48036c9e7 ("ftrace: disable preemption when recursion locked") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Wander Lairson Costa <wander@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-21selftests/ftrace: Update fprobe test to check enabled_functions fileSteven Rostedt1-0/+54
A few bugs were found in the fprobe accounting logic along with it using the function graph infrastructure. Update the fprobe selftest to catch those bugs in case they or something similar shows up in the future. The test now checks the enabled_functions file which shows all the functions attached to ftrace or fgraph. When enabling a fprobe, make sure that its corresponding function is also added to that file. Also add two more fprobes to enable to make sure that the fprobe logic works properly with multiple probes. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250220202055.733001756@goodmis.org Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Tested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-21fprobe: Fix accounting of when to unregister from function graphSteven Rostedt1-3/+3
When adding a new fprobe, it will update the function hash to the functions the fprobe is attached to and register with function graph to have it call the registered functions. The fprobe_graph_active variable keeps track of the number of fprobes that are using function graph. If two fprobes attach to the same function, it increments the fprobe_graph_active for each of them. But when they are removed, the first fprobe to be removed will see that the function it is attached to is also used by another fprobe and it will not remove that function from function_graph. The logic will skip decrementing the fprobe_graph_active variable. This causes the fprobe_graph_active variable to not go to zero when all fprobes are removed, and in doing so it does not unregister from function graph. As the fgraph ops hash will now be empty, and an empty filter hash means all functions are enabled, this triggers function graph to add a callback to the fprobe infrastructure for every function! # echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events # echo "f:myevent2 kernel_clone%return" >> /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions kernel_clone (1) tramp: 0xffffffffc0024000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 # > /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions trace_initcall_start_cb (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 try_to_run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 cleanup_rapl_pmus (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 uncore_free_pcibus_map (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 uncore_types_exit (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 kvm_shutdown (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 vmx_dump_msrs (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170 [..] # cat /sys/kernel/tracing/enabled_functions | wc -l 54702 If a fprobe is being removed and all its functions are also traced by other fprobes, still decrement the fprobe_graph_active counter. Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250220202055.565129766@goodmis.org Fixes: 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer") Closes: https://lore.kernel.org/all/20250217114918.10397-A-hca@linux.ibm.com/ Reported-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-21fprobe: Always unregister fgraph function from opsSteven Rostedt1-4/+2
When the last fprobe is removed, it calls unregister_ftrace_graph() to remove the graph_ops from function graph. The issue is when it does so, it calls return before removing the function from its graph ops via ftrace_set_filter_ips(). This leaves the last function lingering in the fprobe's fgraph ops and if a probe is added it also enables that last function (even though the callback will just drop it, it does add unneeded overhead to make that call). # echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 # echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 schedule_timeout (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 # > /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions # echo "f:myevent3 kmem_cache_free" >> /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions kmem_cache_free (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 schedule_timeout (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 The above enabled a fprobe on kernel_clone, and then on schedule_timeout. The content of the enabled_functions shows the functions that have a callback attached to them. The fprobe attached to those functions properly. Then the fprobes were cleared, and enabled_functions was empty after that. But after adding a fprobe on kmem_cache_free, the enabled_functions shows that the schedule_timeout was attached again. This is because it was still left in the fprobe ops that is used to tell function graph what functions it wants callbacks from. Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250220202055.393254452@goodmis.org Fixes: 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer") Tested-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-21ftrace: Do not add duplicate entries in subops manager opsSteven Rostedt1-0/+3
Check if a function is already in the manager ops of a subops. A manager ops contains multiple subops, and if two or more subops are tracing the same function, the manager ops only needs a single entry in its hash. Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250220202055.226762894@goodmis.org Fixes: 4f554e955614f ("ftrace: Add ftrace_set_filter_ips function") Tested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-21ftrace: Fix accounting of adding subops to a manager opsSteven Rostedt1-11/+22
Function graph uses a subops and manager ops mechanism to attach to ftrace. The manager ops connects to ftrace and the functions it connects to is defined by a list of subops that it manages. The function hash that defines what the above ops attaches to limits the functions to attach if the hash has any content. If the hash is empty, it means to trace all functions. The creation of the manager ops hash is done by iterating over all the subops hashes. If any of the subops hashes is empty, it means that the manager ops hash must trace all functions as well. The issue is in the creation of the manager ops. When a second subops is attached, a new hash is created by starting it as NULL and adding the subops one at a time. But the NULL ops is mistaken as an empty hash, and once an empty hash is found, it stops the loop of subops and just enables all functions. # echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions kernel_clone (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 # echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events # cat /sys/kernel/tracing/enabled_functions trace_initcall_start_cb (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 try_to_run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 cleanup_rapl_pmus (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 uncore_free_pcibus_map (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 uncore_types_exit (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 kvm_shutdown (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 vmx_dump_msrs (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 vmx_cleanup_l1d_flush (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 [..] Fix this by initializing the new hash to NULL and if the hash is NULL do not treat it as an empty hash but instead allocate by copying the content of the first sub ops. Then on subsequent iterations, the new hash will not be NULL, but the content of the previous subops. If that first subops attached to all functions, then new hash may assume that the manager ops also needs to attach to all functions. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250220202055.060300046@goodmis.org Fixes: 5fccc7552ccbc ("ftrace: Add subops logic to allow one ops to manage many") Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-21docs: arch/x86/sva: Fix two grammar errors under Background and FAQBrian Ochoa1-2/+2
- Correct "in order" to "in order to" - Append missing quantifier Signed-off-by: Brian Ochoa <brianeochoa@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250219150920.445802-1-brianeochoa@gmail.com
2025-02-21rseq: Fix rseq registration with CONFIG_DEBUG_RSEQMichael Jeanson1-3/+8
With CONFIG_DEBUG_RSEQ=y, at rseq registration the read-only fields are copied from user-space, if this copy fails the syscall returns -EFAULT and the registration should not be activated - but it erroneously is. Move the activation of the registration after the copy of the fields to fix this bug. Fixes: 7d5265ffcd8b ("rseq: Validate read-only fields under DEBUG_RSEQ config") Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/r/20250219205330.324770-1-mjeanson@efficios.com
2025-02-21x86/cpufeatures: Make AVX-VNNI depend on AVXEric Biggers1-0/+1
The 'noxsave' boot option disables support for AVX, but support for the AVX-VNNI feature was still declared on CPUs that support it. Fix this. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/20250220060124.89622-1-ebiggers@kernel.org
2025-02-21irqchip/qcom-pdc: Workaround hardware register bug on X1E80100Stephan Gerhold1-3/+64
On X1E80100, there is a hardware bug in the register logic of the IRQ_ENABLE_BANK register: While read accesses work on the normal address, all write accesses must be made to a shifted address. Without a workaround for this, the wrong interrupt gets enabled in the PDC and it is impossible to wakeup from deep suspend (CX collapse). This has not caused problems so far, because the deep suspend state was not enabled. A workaround is required now since work is ongoing to fix this. The PDC has multiple "DRV" regions, each one has a size of 0x10000 and provides the same set of registers for a particular client in the system. Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside the DRV region consists of 32 interrupt pins that can be enabled using the IRQ_ENABLE_BANK register: IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32) On X1E, this works as intended for read access. However, write access to most banks is shifted by 2: IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2] IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1] IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2] IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2] IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2] IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended) The negative indexes underflow to banks of the previous DRV/client region: IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2] = IRQ_ENABLE_BANK[drv 1][bank 5-2] = IRQ_ENABLE_BANK[drv 1][bank 3] = IRQ_ENABLE_BANK[drv 1][bank 0 + 3] IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1] = IRQ_ENABLE_BANK[drv 1][bank 5-1] = IRQ_ENABLE_BANK[drv 1][bank 4] = IRQ_ENABLE_BANK[drv 1][bank 1 + 3] Introduce a workaround for the bug by matching the qcom,x1e80100-pdc compatible and apply the offsets as shown above: - Bank 0...1: previous DRV region, bank += 3 - Bank 1...4: our DRV region, bank -= 2 - Bank 5: our DRV region, no fixup required The PDC node in the device tree only describes the DRV region for the Linux client, but the workaround also requires to map parts of the previous DRV region to issue writes there. To maintain compatibility with old device trees, obtain the base address of the preceeding region by applying the -0x10000 offset. Note that this is also more correct from a conceptual point of view: It does not really make use of the other region; it just issues shifted writes that end up in the registers of the Linux associated DRV region 2. Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
2025-02-20MAINTAINERS: Change maintainer for RDTFenghua Yu1-1/+1
Due to job transition, I am stepping down as RDT maintainer. Add Tony as a co-maintainer. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/all/20250131190731.3981085-1-fenghua.yu%40intel.com
2025-02-20soc: loongson: loongson2_guts: Add check for devm_kstrdup()Haoxiang Li1-1/+4
Add check for the return value of devm_kstrdup() in loongson2_guts_probe() to catch potential exception. Fixes: b82621ac8450 ("soc: loongson: add GUTS driver for loongson-2 platforms") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://lore.kernel.org/r/20250220081714.2676828-1-haoxiang_li2024@163.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-20smb: client: Add check for next_buffer in receive_encrypted_standard()Haoxiang Li1-0/+4
Add check for the return value of cifs_buf_get() and cifs_small_buf_get() in receive_encrypted_standard() to prevent null pointer dereference. Fixes: eec04ea11969 ("smb: client: fix OOB in receive_encrypted_standard()") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-02-20nvme: only allow entering LIVE from CONNECTING stateDaniel Wagner1-2/+0
The fabric transports and also the PCI transport are not entering the LIVE state from NEW or RESETTING. This makes the state machine more restrictive and allows to catch not supported state transitions, e.g. directly switching from RESETTING to LIVE. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-02-20nvme-fc: rely on state transitions to handle connectivity lossDaniel Wagner1-61/+6
It's not possible to call nvme_state_ctrl_state with holding a spin lock, because nvme_state_ctrl_state calls cancel_delayed_work_sync when fastfail is enabled. Instead syncing the ASSOC_FLAG and state transitions using a lock, it's possible to only rely on the state machine transitions. That means nvme_fc_ctrl_connectivity_loss should unconditionally call nvme_reset_ctrl which avoids the read race on the ctrl state variable. Actually, it's not necessary to test in which state the ctrl is, the reset work will only scheduled when the state machine is in LIVE state. In nvme_fc_create_association, the LIVE state can only be entered if it was previously CONNECTING. If this is not possible then the reset handler got triggered. Thus just error out here. Fixes: ee59e3820ca9 ("nvme-fc: do not ignore connectivity loss during connecting") Closes: https://lore.kernel.org/all/denqwui6sl5erqmz2gvrwueyxakl5txzbbiu3fgebryzrfxunm@iwxuthct377m/ Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-02-20perf/x86/intel: Fix event constraints for LNCKan Liang2-14/+8
According to the latest event list, update the event constraint tables for Lion Cove core. The general rule (the event codes < 0x90 are restricted to counters 0-3.) has been removed. There is no restriction for most of the performance monitoring events. Fixes: a932aa0e868f ("perf/x86: Add Lunar Lake and Arrow Lake support") Reported-by: Amiri Khalil <amiri.khalil@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
2025-02-20gpiolib: don't bail out if get_direction() fails in gpiochip_add_data()Bartosz Golaszewski1-1/+9
Since commit 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") we check the return value of the get_direction() callback as per its API contract. Some drivers have been observed to fail to register now as they may call get_direction() in gpiochip_add_data() in contexts where it has always silently failed. Until we audit all drivers, replace the bail-out to a kernel log warning. Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/all/dfe03f88-407e-4ef1-ad30-42db53bbd4e4@samsung.com/ Tested-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20250219144356.258635-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-20Revert "net: skb: introduce and use a single page frag cache"Paolo Abeni3-100/+22
After the previous commit is finally safe to revert commit dbae2b062824 ("net: skb: introduce and use a single page frag cache"): do it here. The intended goal of such change was to counter a performance regression introduced by commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs"). Unfortunately, the blamed commit introduces another regression for the virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny size, so that the whole head frag could fit a 512-byte block. The single page frag cache uses a 1K fragment for such allocation, and the additional overhead, under small UDP packets flood, makes the page allocator a bottleneck. Thanks to commit bf9f1baa279f ("net: add dedicated kmem_cache for typical/small skb->head"), this revert does not re-introduce the original regression. Actually, in the relevant test on top of this revert, I measure a small but noticeable positive delta, just above noise level. The revert itself required some additional mangling due to recent updates in the affected code. Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: dbae2b062824 ("net: skb: introduce and use a single page frag cache") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-20net: allow small head cache usage with large MAX_SKB_FRAGS valuesPaolo Abeni3-6/+10
Sabrina reported the following splat: WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0 Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48 RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6 RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168 R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> gro_cells_init+0x1ba/0x270 xfrm_input_init+0x4b/0x2a0 xfrm_init+0x38/0x50 ip_rt_init+0x2d7/0x350 ip_init+0xf/0x20 inet_init+0x406/0x590 do_one_initcall+0x9d/0x2e0 do_initcalls+0x23b/0x280 kernel_init_freeable+0x445/0x490 kernel_init+0x20/0x1d0 ret_from_fork+0x46/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 584330 hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0 hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0 softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470 softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0 on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024) is smaller than GRO_MAX_HEAD. Such built additionally contains the revert of the single page frag cache so that napi_get_frags() ends up using the page frag allocator, triggering the splat. Note that the underlying issue is independent from the mentioned revert; address it ensuring that the small head cache will fit either TCP and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb() to select kmalloc() usage for any allocation fitting such cache. Reported-by: Sabrina Dubroca <sd@queasysnail.net> Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-20nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()Haoxiang Li1-0/+2
Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference. Fixes: ff3d43f7568c ("nfp: bpf: implement helpers for FW map ops") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://patch.msgid.link/20250218030409.2425798-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-20tcp: drop secpath at the same time as we currently drop dstSabrina Dubroca4-7/+21
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while running tests that boil down to: - create a pair of netns - run a basic TCP test over ipcomp6 - delete the pair of netns The xfrm_state found on spi_byaddr was not deleted at the time we delete the netns, because we still have a reference on it. This lingering reference comes from a secpath (which holds a ref on the xfrm_state), which is still attached to an skb. This skb is not leaked, it ends up on sk_receive_queue and then gets defer-free'd by skb_attempt_defer_free. The problem happens when we defer freeing an skb (push it on one CPU's defer_list), and don't flush that list before the netns is deleted. In that case, we still have a reference on the xfrm_state that we don't expect at this point. We already drop the skb's dst in the TCP receive path when it's no longer needed, so let's also drop the secpath. At this point, tcp_filter has already called into the LSM hooks that may require the secpath, so it should not be needed anymore. However, in some of those places, the MPTCP extension has just been attached to the skb, so we cannot simply drop all extensions. Fixes: 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-20net: axienet: Set mac_managed_pmNick Hu1-0/+1
The external PHY will undergo a soft reset twice during the resume process when it wake up from suspend. The first reset occurs when the axienet driver calls phylink_of_phy_connect(), and the second occurs when mdio_bus_phy_resume() invokes phy_init_hw(). The second soft reset of the external PHY does not reinitialize the internal PHY, which causes issues with the internal PHY, resulting in the PHY link being down. To prevent this, setting the mac_managed_pm flag skips the mdio_bus_phy_resume() function. Fixes: a129b41fe0a8 ("Revert "net: phy: dp83867: perform soft reset and retain established link"") Signed-off-by: Nick Hu <nick.hu@sifive.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250217055843.19799-1-nick.hu@sifive.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-19arp: switch to dev_getbyhwaddr() in arp_req_set_public()Breno Leitao1-1/+1
The arp_req_set_public() function is called with the rtnl lock held, which provides enough synchronization protection. This makes the RCU variant of dev_getbyhwaddr() unnecessary. Switch to using the simpler dev_getbyhwaddr() function since we already have the required rtnl locking. This change helps maintain consistency in the networking code by using the appropriate helper function for the existing locking context. Since we're not holding the RCU read lock in arp_req_set_public() existing code could trigger false positive locking warnings. Fixes: 941666c2e3e0 ("net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()") Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-2-d3d6892db9e1@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19net: Add non-RCU dev_getbyhwaddr() helperBreno Leitao2-3/+36
Add dedicated helper for finding devices by hardware address when holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not. Extract common address comparison logic into dev_addr_cmp(). The context about this change could be found in the following discussion: Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/ Cc: kuniyu@amazon.com Cc: ushankar@purestorage.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19sctp: Fix undefined behavior in left shift operationYu-Chun Lin1-1/+1
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7): "If E1 has a signed type and E1 x 2^E2 is not representable in the result type, the behavior is undefined." Shifting 1 << 31 causes signed integer overflow, which leads to undefined behavior. Fix this by explicitly using '1U << 31' to ensure the shift operates on an unsigned type, avoiding undefined behavior. Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19selftests/bpf: Add a specific dst port matchingCong Wang1-1/+6
After this patch: #102/1 flow_dissector_classification/ipv4:OK #102/2 flow_dissector_classification/ipv4_continue_dissect:OK #102/3 flow_dissector_classification/ipip:OK #102/4 flow_dissector_classification/gre:OK #102/5 flow_dissector_classification/port_range:OK #102/6 flow_dissector_classification/ipv6:OK #102 flow_dissector_classification:OK Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250218043210.732959-5-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.