aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-03-10net: sched: validate stab valuesEric Dumazet5-8/+20
iproute2 package is well behaved, but malicious user space can provide illegal shift values and trigger UBSAN reports. Add stab parameter to red_check_params() to validate user input. syzbot reported: UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18 shift exponent 111 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_calc_qavg_from_idle_time include/net/red.h:312 [inline] red_calc_qavg include/net/red.h:353 [inline] choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221 __dev_xmit_skb net/core/dev.c:3837 [inline] __dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150 neigh_hh_output include/net/neighbour.h:499 [inline] neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117 __ip6_finish_output net/ipv6/ip6_output.c:182 [inline] __ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161 ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192 NF_HOOK_COND include/linux/netfilter.h:290 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215 dst_output include/net/dst.h:448 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] NF_HOOK include/linux/netfilter.h:295 [inline] ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320 inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135 dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138 dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535 dccp_finish_passive_close net/dccp/proto.c:123 [inline] dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118 dccp_terminate_connection net/dccp/proto.c:958 [inline] dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478 __sock_release+0xcd/0x280 net/socket.c:599 sock_close+0x18/0x20 net/socket.c:1258 __fput+0x288/0x920 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10net: dsa: bcm_sf2: use 2 Gbps IMP port link on BCM4908Rafał Miłecki1-1/+4
BCM4908 uses 2 Gbps link between switch and the Ethernet interface. Without this BCM4908 devices were able to achieve only 2 x ~895 Mb/s. This allows handling e.g. NAT traffic with 940 Mb/s. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10net: pxa168_eth: Fix a potential data race in pxa168_eth_removePavel Andrianov1-1/+1
pxa168_eth_remove() firstly calls unregister_netdev(), then cancels a timeout work. unregister_netdev() shuts down a device interface and removes it from the kernel tables. If the timeout occurs in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop and open of the device. It may lead to an inconsistent state and memory leaks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Andrianov <andrianov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10macvlan: macvlan_count_rx() needs to be aware of preemptionEric Dumazet1-1/+2
macvlan_count_rx() can be called from process context, it is thus necessary to disable preemption before calling u64_stats_update_begin() syzbot was able to spot this on 32bit arch: WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline] WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269 Modules linked in: Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: ARM-Versatile Express Workqueue: events macvlan_process_broadcast Backtrace: [<82740468>] (dump_backtrace) from [<827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252) r7:00000080 r6:60000093 r5:00000000 r4:8422a3c4 [<827406c4>] (show_stack) from [<82751b58>] (__dump_stack lib/dump_stack.c:79 [inline]) [<827406c4>] (show_stack) from [<82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120) [<82751aa0>] (dump_stack) from [<82741270>] (panic+0x130/0x378 kernel/panic.c:231) r7:830209b4 r6:84069ea4 r5:00000000 r4:844350d0 [<82741140>] (panic) from [<80244924>] (__warn+0xb0/0x164 kernel/panic.c:605) r3:8404ec8c r2:00000000 r1:00000000 r0:830209b4 r7:0000010f [<80244874>] (__warn) from [<82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628) r7:81363f70 r6:0000010f r5:83018e50 r4:00000000 [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline]) [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269) r8:5a109000 r7:0000000f r6:a568dac0 r5:89802300 r4:00000001 [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291) r5:89802300 r4:8a927740 [<8136499c>] (macvlan_broadcast) from [<81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317) r10:81364f78 r9:8a86d000 r8:8a9c7e7c r7:8413aa5c r6:00000000 r5:00000000 r4:89802840 [<81364dc8>] (macvlan_process_broadcast) from [<802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275) r10:00000008 r9:8404ec98 r8:84367a02 r7:ddfe6400 r6:ddfe2d40 r5:898dac80 r4:8a86d43c [<802693d0>] (process_one_work) from [<80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421) r10:00000008 r9:8a9c6000 r8:84006d00 r7:ddfe2d78 r6:898dac94 r5:ddfe2d40 r4:898dac80 [<80269d68>] (worker_thread) from [<80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292) r10:85247e64 r9:898dac80 r8:80269d68 r7:00000000 r6:8a9c6000 r5:89a2ee40 r4:8a97bd00 [<80271dbc>] (kthread) from [<80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158) Exception stack(0x8a9c7fb0 to 0x8a9c7ff8) Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10drop_monitor: Perform cleanup upon probe registration failureIdo Schimmel1-0/+23
In the rare case that drop_monitor fails to register its probe on the 'napi_poll' tracepoint, it will not deactivate its hysteresis timer as part of the error path. If the hysteresis timer was armed by the shortly lived 'kfree_skb' probe and user space retries to initiate tracing, a warning will be emitted for trying to initialize an active object [1]. Fix this by properly undoing all the operations that were done prior to probe registration, in both software and hardware code paths. Note that syzkaller managed to fail probe registration by injecting a slab allocation failure [2]. [1] ODEBUG: init active (active state 0) object type: timer_list hint: sched_send_work+0x0/0x60 include/linux/list.h:135 WARNING: CPU: 1 PID: 8649 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 1 PID: 8649 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 [...] Call Trace: __debug_object_init+0x524/0xd10 lib/debugobjects.c:588 debug_timer_init kernel/time/timer.c:722 [inline] debug_init kernel/time/timer.c:770 [inline] init_timer_key+0x2d/0x340 kernel/time/timer.c:814 net_dm_trace_on_set net/core/drop_monitor.c:1111 [inline] set_all_monitor_traces net/core/drop_monitor.c:1188 [inline] net_dm_monitor_start net/core/drop_monitor.c:1295 [inline] net_dm_cmd_trace+0x720/0x1220 net/core/drop_monitor.c:1339 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2348 ___sys_sendmsg+0xf3/0x170 net/socket.c:2402 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2435 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae [2] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 1 PID: 8645 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: dump_stack+0xfa/0x151 should_fail.cold+0x5/0xa should_failslab+0x5/0x10 __kmalloc+0x72/0x3f0 tracepoint_add_func+0x378/0x990 tracepoint_probe_register+0x9c/0xe0 net_dm_cmd_trace+0x7fc/0x1220 genl_family_rcv_msg_doit+0x228/0x320 genl_rcv_msg+0x328/0x580 netlink_rcv_skb+0x153/0x420 genl_rcv+0x24/0x40 netlink_unicast+0x533/0x7d0 netlink_sendmsg+0x856/0xd90 sock_sendmsg+0xcf/0x120 ____sys_sendmsg+0x6e8/0x810 ___sys_sendmsg+0xf3/0x170 __sys_sendmsg+0xe5/0x1b0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 70c69274f354 ("drop_monitor: Initialize timer and work item upon tracing enable") Fixes: 8ee2267ad33e ("drop_monitor: Convert to using devlink tracepoint") Reported-by: syzbot+779559d6503f3a56213d@syzkaller.appspotmail.com Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10ipv6: fix suspecious RCU usage warningWei Wang2-1/+25
Syzbot reported the suspecious RCU usage in nexthop_fib6_nh() when called from ipv6_route_seq_show(). The reason is ipv6_route_seq_start() calls rcu_read_lock_bh(), while nexthop_fib6_nh() calls rcu_dereference_rtnl(). The fix proposed is to add a variant of nexthop_fib6_nh() to use rcu_dereference_bh_rtnl() for ipv6_route_seq_show(). The reported trace is as follows: ./include/net/nexthop.h:416 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.0/17895: at: seq_read+0x71/0x12a0 fs/seq_file.c:169 at: seq_file_net include/linux/seq_file_net.h:19 [inline] at: ipv6_route_seq_start+0xaf/0x300 net/ipv6/ip6_fib.c:2616 stack backtrace: CPU: 1 PID: 17895 Comm: syz-executor.0 Not tainted 4.15.0-syzkaller #0 Call Trace: [<ffffffff849edf9e>] __dump_stack lib/dump_stack.c:17 [inline] [<ffffffff849edf9e>] dump_stack+0xd8/0x147 lib/dump_stack.c:53 [<ffffffff8480b7fa>] lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5745 [<ffffffff8459ada6>] nexthop_fib6_nh include/net/nexthop.h:416 [inline] [<ffffffff8459ada6>] ipv6_route_native_seq_show net/ipv6/ip6_fib.c:2488 [inline] [<ffffffff8459ada6>] ipv6_route_seq_show+0x436/0x7a0 net/ipv6/ip6_fib.c:2673 [<ffffffff81c556df>] seq_read+0xccf/0x12a0 fs/seq_file.c:276 [<ffffffff81dbc62c>] proc_reg_read+0x10c/0x1d0 fs/proc/inode.c:231 [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:714 [inline] [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:701 [inline] [<ffffffff81bc28ae>] do_iter_read+0x49e/0x660 fs/read_write.c:935 [<ffffffff81bc81ab>] vfs_readv+0xfb/0x170 fs/read_write.c:997 [<ffffffff81c88847>] kernel_readv fs/splice.c:361 [inline] [<ffffffff81c88847>] default_file_splice_read+0x487/0x9c0 fs/splice.c:416 [<ffffffff81c86189>] do_splice_to+0x129/0x190 fs/splice.c:879 [<ffffffff81c86f66>] splice_direct_to_actor+0x256/0x890 fs/splice.c:951 [<ffffffff81c8777d>] do_splice_direct+0x1dd/0x2b0 fs/splice.c:1060 [<ffffffff81bc4747>] do_sendfile+0x597/0xce0 fs/read_write.c:1459 [<ffffffff81bca205>] SYSC_sendfile64 fs/read_write.c:1520 [inline] [<ffffffff81bca205>] SyS_sendfile64+0x155/0x170 fs/read_write.c:1506 [<ffffffff81015fcf>] do_syscall_64+0x1ff/0x310 arch/x86/entry/common.c:305 [<ffffffff84a00076>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Wei Wang <weiwan@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Petr Machata <petrm@nvidia.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10net, bpf: Fix ip6ip6 crash with collect_md populated skbsDaniel Borkmann1-22/+9
I ran into a crash where setting up a ip6ip6 tunnel device which was /not/ set to collect_md mode was receiving collect_md populated skbs for xmit. The BPF prog was populating the skb via bpf_skb_set_tunnel_key() which is assigning special metadata dst entry and then redirecting the skb to the device, taking ip6_tnl_start_xmit() -> ipxip6_tnl_xmit() -> ip6_tnl_xmit() and in the latter it performs a neigh lookup based on skb_dst(skb) where we trigger a NULL pointer dereference on dst->ops->neigh_lookup() since the md_dst_ops do not populate neigh_lookup callback with a fake handler. Transform the md_dst_ops into generic dst_blackhole_ops that can also be reused elsewhere when needed, and use them for the metadata dst entries as callback ops. Also, remove the dst_md_discard{,_out}() ops and rely on dst_discard{,_out}() from dst_init() which free the skb the same way modulo the splat. Given we will be able to recover just fine from there, avoid any potential splats iff this gets ever triggered in future (or worse, panic on warns when set). Fixes: f38a9eb1f77b ("dst: Metadata destinations") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10net: Consolidate common blackhole dst opsDaniel Borkmann4-64/+66
Move generic blackhole dst ops to the core and use them from both ipv4_dst_blackhole_ops and ip6_dst_blackhole_ops where possible. No functional change otherwise. We need these also in other locations and having to define them over and over again is not great. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10net/mlx5: DR, Fix potential shift wrapping of 32-bit value in STEv1 getterYevgeny Kliteynik1-2/+2
Fix 32-bit variable shift wrapping in dr_ste_v1_get_miss_addr. Fixes: a6098129c781 ("net/mlx5: DR, Add STEv1 setters and getters") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5: SF: Fix error flow of SFs allocation flowShay Drory1-1/+1
When SF id is unavailable, code jumps to wrong label that accesses sw id array outside of its range. Hence, when SF id is not allocated, avoid accessing such array. Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5: SF: Fix memory leak of work itemShay Drory1-0/+1
Cited patch in the fixes tag missed to free the allocated work. Fix it by freeing the work after work execution. Fixes: f3196bb0f14c ("net/mlx5: Introduce vhca state event notifier") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5: SF, Correct vhca context sizeParav Pandit1-1/+1
Fix vhca context size as defined by device interface specification. Fixes: f3196bb0f14c ("net/mlx5: Introduce vhca state event notifier") Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: E-switch, Fix rate calculation divisionParav Pandit1-1/+2
do_div() returns reminder, while cited patch wanted to use quotient. Fix it by using quotient. Fixes: 0e22bfb7c046 ("net/mlx5e: E-switch, Fix rate calculation for overflow") Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10RDMA/mlx5: Fix timestamp default modeMaor Gottlieb1-4/+14
1. Don't set the ts_format bit to default when it reserved - device is running in the old mode (free running). 2. XRC doesn't have a CQ therefore the ts format in the QP context should be default / free running. 3. Set ts_format to WQ. Fixes: 2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5: Set QP timestamp mode to defaultMaor Gottlieb4-0/+10
QPs which don't care from timestamp mode, should set the ts_format to default, otherwise the QP creation could be failed if the timestamp mode is not supported. Fixes: 2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: Fix error flow in change profileRoi Dayan2-18/+26
Move priv memset from init to cleanup to avoid double priv cleanup that can happen on profile change if also roolback fails. Add missing cleanup flow in mlx5e_netdev_attach_profile(). Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method") Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5: Disable VF tunnel TX offload if ignore_flow_level isn't supportedMaor Dickman1-1/+2
VF tunnel TX traffic offload is adding flow which forward to flow tables with lower level, which isn't support on all FW versions and may cause firmware to fail with syndrome. Fixed by enabling VF tunnel TX offload only if flow table capability ignore_flow_level is enabled. Fixes: 10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: Check correct ip_version in decapsulation route resolutionRoi Dayan3-5/+7
flow_attr->ip_version has the matching that should be done inner/outer. When working with chains, decapsulation is done on chain0 and next chain match on outer header which is the original inner which could be ipv4. So in tunnel route resolution we cannot use that to know which ip version we are at so save tun_ip_version when parsing the tunnel match and use that. Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5: Fix turn-off PPS commandAya Levin1-4/+4
Fix a bug of uninitialized pin index when trying to turn off PPS out. Fixes: de19cd6cc977 ("net/mlx5: Move some PPS logic into helper functions") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: Don't match on Geneve options in case option masks are all zeroMaor Dickman1-0/+4
The cited change added offload support for Geneve options without verifying the validity of the options masks, this caused offload of rules with match on Geneve options with class,type and data masks which are zero to fail. Fix by ignoring the match on Geneve options in case option masks are all zero. Fixes: 9272e3df3023 ("net/mlx5e: Geneve, Add support for encap/decap flows offload") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: Revert parameters on errors when changing PTP state without resetMaxim Mikityanskiy1-0/+5
Port timestamping for PTP can be enabled/disabled while the channels are closed. In that case mlx5e_safe_switch_channels is skipped, and the preactivate hook is called directly. However, if that hook returns an error, the channel parameters must be reverted back to their old values. This commit adds missing handling on this case. Fixes: 145e5637d941 ("net/mlx5e: Add TX PTP port object support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: When changing XDP program without reset, take refs for XSK RQsMaxim Mikityanskiy1-1/+3
Each RQ (including XSK RQs) takes a reference to the XDP program. When an XDP program is attached or detached, the channels and queues are recreated, however, there is a special flow for changing an active XDP program to another one. In that flow, channels and queues stay alive, but the refcounts of the old and new XDP programs are adjusted. This flow didn't increment refcount by the number of active XSK RQs, and this commit fixes it. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: Set PTP channel pointer explicitly to NULLAya Levin1-1/+3
When closing the PTP channel, set its pointer explicitly to NULL. PTP channel is opened on demand, the code verify the pointer validity before access. Nullify it when closing the PTP channel to avoid unexpected behavior. Fixes: 145e5637d941 ("net/mlx5e: Add TX PTP port object support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: Accumulate port PTP TX stats with other channels statsAya Levin1-0/+9
In addition to .get_ethtool_stats, add port PTP TX stats to .ndo_get_stats64. Fixes: 145e5637d941 ("net/mlx5e: Add TX PTP port object support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: RX, Mind the MPWQE gaps when calculating offsetsTariq Toukan3-8/+9
Since cited patch, MLX5E_REQUIRED_WQE_MTTS is not a power of two. Hence, usage of MLX5E_LOG_ALIGNED_MPWQE_PPW should be replaced, as it lost some accuracy. Use the designated macro to calculate the number of required MTTs. This makes sure the solution in cited patch works properly. While here, un-inline mlx5e_get_mpwqe_offset(), and remove the unused RQ parameter. Fixes: c3c9402373fe ("net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5e: Enforce minimum value check for ICOSQ sizeTariq Toukan1-2/+3
The ICOSQ size should not go below MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE. Enforce this where it's missing. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-09sparc: sparc64_defconfig: remove duplicate CONFIGsCorentin Labbe1-3/+1
After my patch there is CONFIG_ATA defined twice. Remove the duplicate one. Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot test with NFS. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: a57cdeb369ef ("sparc: sparc64_defconfig: add necessary configs for qemu") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09sparc64: Fix opcode filtering in handling of no fault loadsRob Gardner1-7/+6
is_no_fault_exception() has two bugs which were discovered via random opcode testing with stress-ng. Both are caused by improper filtering of opcodes. The first bug can be triggered by a floating point store with a no-fault ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040. The code first tests op3[5] (0x1000000), which denotes a floating point instruction, and then tests op3[2] (0x200000), which denotes a store instruction. But these bits are not mutually exclusive, and the above mentioned opcode has both bits set. The intent is to filter out stores, so the test for stores must be done first in order to have any effect. The second bug can be triggered by a floating point load with one of the invalid ASI values 0x8e or 0x8f, which pass this check in is_no_fault_exception(): if ((asi & 0xf2) == ASI_PNF) An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38", opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal in handle_ldf_stq(), and is_no_fault_exception() must not allow these invalid asi values to make it that far. In both of these cases, handle_ldf_stq() reacts by calling sun4v_data_access_exception() or spitfire_data_access_exception(), which call is_no_fault_exception() and results in an infinite recursion. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09s390/qeth: fix notification for pending buffers during teardownJulian Wiedmann1-3/+3
The cited commit reworked the state machine for pending TX buffers. In qeth_iqd_tx_complete() it turned PENDING into a transient state, and uses NEED_QAOB for buffers that get parked while waiting for their QAOB completion. But it missed to adjust the check in qeth_tx_complete_buf(). So if qeth_tx_complete_pending_bufs() is called during teardown to drain the parked TX buffers, we no longer raise a notification for af_iucv. Instead of updating the checked state, just move this code into qeth_tx_complete_pending_bufs() itself. This also gets rid of the special-case in the common TX completion path. Fixes: 8908f36d20d8 ("s390/qeth: fix af_iucv notification race") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09s390/qeth: schedule TX NAPI on QAOB completionJulian Wiedmann1-6/+12
When a QAOB notifies us that a pending TX buffer has been delivered, the actual TX completion processing by qeth_tx_complete_pending_bufs() is done within the context of a TX NAPI instance. We shouldn't rely on this instance being scheduled by some other TX event, but just do it ourselves. qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI instance. To avoid touching the TX queue's NAPI instance before/after it is (un-)registered, reorder the code in qeth_open() and qeth_stop() accordingly. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09s390/qeth: improve completion of pending TX buffersJulian Wiedmann2-42/+30
The current design attaches a pending TX buffer to a custom single-linked list, which is anchored at the buffer's slot on the TX ring. The buffer is then checked for final completion whenever this slot is processed during a subsequent TX NAPI poll cycle. But if there's insufficient traffic on the ring, we might never make enough progress to get back to this ring slot and discover the pending buffer's final TX completion. In particular if this missing TX completion blocks the application from sending further traffic. So convert the custom single-linked list code to a per-queue list_head, and scan this list on every TX NAPI cycle. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09s390/qeth: fix memory leak after failed TX Buffer allocationJulian Wiedmann1-18/+17
When qeth_alloc_qdio_queues() fails to allocate one of the buffers that back an Output Queue, the 'out_freeoutqbufs' path will free all previously allocated buffers for this queue. But it misses to free the half-finished queue struct itself. Move the buffer allocation into qeth_alloc_output_queue(), and deal with such errors internally. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0Balazs Nemeth1-0/+3
A packet with skb_inner_network_header(skb) == skb_network_header(skb) and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers from the packet. Subsequently, the call to skb_mac_gso_segment will again call mpls_gso_segment with the same packet leading to an infinite loop. In addition, ensure that the header length is a multiple of four, which should hold irrespective of the number of stacked labels. Signed-off-by: Balazs Nemeth <bnemeth@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09net: check if protocol extracted by virtio_net_hdr_set_proto is correctBalazs Nemeth1-1/+6
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't set) based on the type in the virtio net hdr, but the skb could contain anything since it could come from packet_snd through a raw socket. If there is a mismatch between what virtio_net_hdr_set_proto sets and the actual protocol, then the skb could be handled incorrectly later on. An example where this poses an issue is with the subsequent call to skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set correctly. A specially crafted packet could fool skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned. Avoid blindly trusting the information provided by the virtio net header by checking that the protocol in the packet actually matches the protocol set by virtio_net_hdr_set_proto. Note that since the protocol is only checked if skb->dev implements header_ops->parse_protocol, packets from devices without the implementation are not checked at this stage. Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets") Signed-off-by: Balazs Nemeth <bnemeth@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09net: dsa: xrs700x: check if partner is same as port in hsr joinGeorge McCollister1-2/+8
Don't assign dp to partner if it's the same port that xrs700x_hsr_join was called with. The partner port is supposed to be the other port in the HSR/PRP redundant pair not the same port. This fixes an issue observed in testing where forwarding between redundant HSR ports on this switch didn't work depending on the order the ports were added to the hsr device. Fixes: bd62e6f5e6a9 ("net: dsa: xrs700x: add HSR offloading support") Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10bpf, x86: Use kvmalloc_array instead kmalloc_array in bpf_jit_compYonghong Song1-2/+2
x86 bpf_jit_comp.c used kmalloc_array to store jited addresses for each bpf insn. With a large bpf program, we have see the following allocation failures in our production server: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0" Call Trace: dump_stack+0x50/0x70 warn_alloc.cold.120+0x72/0xd2 ? __alloc_pages_direct_compact+0x157/0x160 __alloc_pages_slowpath+0xcdb/0xd00 ? get_page_from_freelist+0xe44/0x1600 ? vunmap_page_range+0x1ba/0x340 __alloc_pages_nodemask+0x2c9/0x320 kmalloc_order+0x18/0x80 kmalloc_order_trace+0x1d/0xa0 bpf_int_jit_compile+0x1e2/0x484 ? kmalloc_order_trace+0x1d/0xa0 bpf_prog_select_runtime+0xc3/0x150 bpf_prog_load+0x480/0x720 ? __mod_memcg_lruvec_state+0x21/0x100 __do_sys_bpf+0xc31/0x2040 ? close_pdeo+0x86/0xe0 do_syscall_64+0x42/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2f300f7fa9 Code: Bad RIP value. Dumped assembly: ffffffff810b6d70 <bpf_int_jit_compile>: ; { ffffffff810b6d70: e8 eb a5 b4 00 callq 0xffffffff81c01360 <__fentry__> ffffffff810b6d75: 41 57 pushq %r15 ... ffffffff810b6f39: e9 72 fe ff ff jmp 0xffffffff810b6db0 <bpf_int_jit_compile+0x40> ; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); ffffffff810b6f3e: 8b 45 0c movl 12(%rbp), %eax ; return __kmalloc(bytes, flags); ffffffff810b6f41: be c0 0c 00 00 movl $3264, %esi ; addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); ffffffff810b6f46: 8d 78 01 leal 1(%rax), %edi ; if (unlikely(check_mul_overflow(n, size, &bytes))) ffffffff810b6f49: 48 c1 e7 02 shlq $2, %rdi ; return __kmalloc(bytes, flags); ffffffff810b6f4d: e8 8e 0c 1d 00 callq 0xffffffff81287be0 <__kmalloc> ; if (!addrs) { ffffffff810b6f52: 48 85 c0 testq %rax, %rax Change kmalloc_array() to kvmalloc_array() to avoid potential allocation error for big bpf programs. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210309015647.3657852-1-yhs@fb.com
2021-03-09bpf: Don't do bpf_cgroup_storage_set() for kuprobe/tp programsYonghong Song1-4/+5
For kuprobe and tracepoint bpf programs, kernel calls trace_call_bpf() which calls BPF_PROG_RUN_ARRAY_CHECK() to run the program array. Currently, BPF_PROG_RUN_ARRAY_CHECK() also calls bpf_cgroup_storage_set() to set percpu cgroup local storage with NULL value. This is due to Commit 394e40a29788 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") which modified __BPF_PROG_RUN_ARRAY() to call bpf_cgroup_storage_set() and this macro is also used by BPF_PROG_RUN_ARRAY_CHECK(). kuprobe and tracepoint programs are not allowed to call bpf_get_local_storage() helper hence does not access percpu cgroup local storage. Let us change BPF_PROG_RUN_ARRAY_CHECK() not to modify percpu cgroup local storage. The issue is observed when I tried to debug [1] where percpu data is overwritten due to preempt_disable -> migration_disable change. This patch does not completely fix the above issue, which will be addressed separately, e.g., multiple cgroup prog runs may preempt each other. But it does fix any potential issue caused by tracing program overwriting percpu cgroup storage: - in a busy system, a tracing program is to run between bpf_cgroup_storage_set() and the cgroup prog run. - a kprobe program is triggered by a helper in cgroup prog before bpf_get_local_storage() is called. [1] https://lore.kernel.org/bpf/CAKH8qBuXCfUz=w8L+Fj74OaUpbosO29niYwTki7e3Ag044_aww@mail.gmail.com/T Fixes: 394e40a29788 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20210309185028.3763817-1-yhs@fb.com
2021-03-09net: lapbether: Remove netif_start_queue / netif_stop_queueXie He1-3/+0
For the devices in this driver, the default qdisc is "noqueue", because their "tx_queue_len" is 0. In function "__dev_queue_xmit" in "net/core/dev.c", devices with the "noqueue" qdisc are specially handled. Packets are transmitted without being queued after a "dev->flags & IFF_UP" check. However, it's possible that even if this check succeeds, "ops->ndo_stop" may still have already been called. This is because in "__dev_close_many", "ops->ndo_stop" is called before clearing the "IFF_UP" flag. If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in "__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it checks "netif_xmit_stopped" and finds that the queue is already stopped. In this case, it will complain that: "Virtual device ... asks to queue packet!" To prevent "__dev_queue_xmit" from generating this complaint, we should not call "netif_stop_queue" in "ops->ndo_stop". We also don't need to call "netif_start_queue" in "ops->ndo_open", because after a netdev is allocated and registered, the "__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need to call "netif_start_queue" to clear it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09MIPS: kernel: Reserve exception base early to prevent corruptionThomas Bogendoerfer4-5/+17
BMIPS is one of the few platforms that do change the exception base. After commit 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end") we started seeing BMIPS boards fail to boot with the built-in FDT being corrupted. Before the cited commit, early allocations would be in the [kernel_end, RAM_END] range, but after commit they would be within [RAM_START + PAGE_SIZE, RAM_END]. The custom exception base handler that is installed by bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the memory region allocated by unflatten_and_copy_device_tree() thus corrupting the FDT used by the kernel. To fix this, we need to perform an early reservation of the custom exception space. Additional we reserve the first 4k (1k for R3k) for either normal exception vector space (legacy CPUs) or special vectors like cache exceptions. Huge thanks to Serge for analysing and proposing a solution to this issue. Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end") Reported-by: Kamal Dasu <kdasu.kdev@gmail.com> Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-08atm: idt77252: fix null-ptr-dereferenceTong Zhang1-2/+2
this one is similar to the phy_data allocation fix in uPD98402, the driver allocate the idt77105_priv and store to dev_data but later dereference using dev->dev_data, which will cause null-ptr-dereference. fix this issue by changing dev_data to phy_data so that PRIV(dev) can work correctly. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08atm: uPD98402: fix incorrect allocationTong Zhang1-1/+1
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock (i.e dev->phy_data->lock) will result in a null-ptr-dereference. I believe this is a typo and what it actually want to do is to allocate phy_data instead of dev_data. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08atm: fix a typo in the struct descriptionTong Zhang1-1/+1
phy_data means private PHY data not date Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: qrtr: fix error return code of qrtr_sendmsg()Jia-Ju Bai1-1/+3
When sock_alloc_send_skb() returns NULL to skb, no error return code of qrtr_sendmsg() is assigned. To fix this bug, rc is assigned with -ENOMEM in this case. Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08mptcp: fix length of ADD_ADDR with port sub-optionDavide Caratti1-6/+8
in current Linux, MPTCP peers advertising endpoints with port numbers use a sub-option length that wrongly accounts for the trailing TCP NOP. Also, receivers will only process incoming ADD_ADDR with port having such wrong sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1. this can be verified running tcpdump on the kselftests artifacts: unpatched kernel: [root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535 IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0 IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]] patched kernel: [root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535 IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0 IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0 Fixes: 22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing") CC: stable@vger.kernel.org # 5.11+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08selftests/bpf: Tests using bpf_check_mtu BPF-helper input mtu_len paramJesper Dangaard Brouer2-0/+96
Add tests that use mtu_len as input parameter in BPF-helper bpf_check_mtu(). The BPF-helper is avail from both XDP and TC context. Add two tests per context, one that tests below MTU and one that exceeds the MTU. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/161521556358.3515614.5915221479709358964.stgit@firesoul
2021-03-08bpf: BPF-helper for MTU checking add length inputJesper Dangaard Brouer2-7/+21
The FIB lookup example[1] show how the IP-header field tot_len (iph->tot_len) is used as input to perform the MTU check. This patch extend the BPF-helper bpf_check_mtu() with the same ability to provide the length as user parameter input, via mtu_len parameter. This still needs to be done before the bpf_check_mtu() helper API becomes frozen. [1] samples/bpf/xdp_fwd_kern.c Fixes: 34b2021cc616 ("bpf: Add BPF-helper for MTU checking") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/161521555850.3515614.6533850861569774444.stgit@firesoul
2021-03-08net: bonding: fix error return code of bond_neigh_init()Jia-Ju Bai1-2/+6
When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error return code of bond_neigh_init() is assigned. To fix this bug, ret is assigned with -EINVAL in these cases. Fixes: 9e99bfefdbce ("bonding: fix bond_neigh_init()") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: enetc: allow hardware timestamping on TX queues with tc-etf enabledVladimir Oltean1-0/+6
The txtime is passed to the driver in skb->skb_mstamp_ns, which is actually in a union with skb->tstamp (the place where software timestamps are kept). Since commit b50a5c70ffa4 ("net: allow simultaneous SW and HW transmit timestamping"), __sock_recv_timestamp has some logic for making sure that the two calls to skb_tstamp_tx: skb_tx_timestamp(skb) # Software timestamp in the driver -> skb_tstamp_tx(skb, NULL) and skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver will both do the right thing and in a race-free manner, meaning that skb_tx_timestamp will deliver a cmsg with the software timestamp only, and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg with the hardware timestamp only. Why are races even possible? Well, because although the software timestamp skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb) lives in skb_shinfo(skb), an area which is shared between skbs and their clones. And skb_tstamp_tx works by cloning the packets when timestamping them, therefore attempting to perform hardware timestamping on an skb's clone will also change the hardware timestamp of the original skb. And the original skb might have been yet again cloned for software timestamping, at an earlier stage. So the logic in __sock_recv_timestamp can't be as simple as saying "does this skb have a hardware timestamp? if yes I'll send the hardware timestamp to the socket, otherwise I'll send the software timestamp", precisely because the hardware timestamp is shared. Instead, it's quite the other way around: __sock_recv_timestamp says "does this skb have a software timestamp? if yes, I'll send the software timestamp, otherwise the hardware one". This works because the software timestamp is not shared with clones. But that means we have a problem when we attempt hardware timestamping with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp will say "oh, yeah, this must be some sort of odd clone" and will not deliver the hardware timestamp to the socket. And this is exactly what is happening when we have txtime enabled on the socket: as mentioned, that is put in a union with skb->tstamp, so it is quite easy to mistake it. Do what other drivers do (intel igb/igc) and write zero to skb->tstamp before taking the hardware timestamp. It's of no use to us now (we're already on the TX confirmation path). Fixes: 0d08c9ec7d6e ("enetc: add support time specific departure base on the qos etf") Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: enetc: set MAC RX FIFO to recommended valueAlex Marginean2-0/+8
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high and may lead to RX lock-up under traffic at a rate higher than 6 Gbps. Set it to 1 instead, as recommended by the hardware design team and by later versions of the ENETC block guide. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: davicom: Use platform_get_irq_optional()Paul Cercueil1-1/+1
The second IRQ line really is optional, so use platform_get_irq_optional() to obtain it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.