aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-29sfc: fix attempt to translate invalid filter IDEdward Cree1-3/+4
When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()Michal Kubeček1-7/+17
Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883cfcf4 ("net: make GRO aware of skb->head_frag") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29bpf: prevent leaking pointer via xadd on unpriviledgedDaniel Borkmann2-0/+71
Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs") Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020-pci: add missing pdev setup in netdev structureMichael Grzeschik1-0/+1
We add the pdev data to the pci devices netdev structure. This way the interface get consistent device names in the userspace (udev). Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020-pci: fix dev_id calculationMichael Grzeschik1-2/+3
The dev_id was miscalculated. Only the two bits 4-5 are relevant for the MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020: remove needless base_addr assignmentMichael Grzeschik1-2/+0
The assignment is superfluous. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29Trivial fix to spelling mistake in arc_printk messageColin Ian King1-1/+1
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: change irq handler to lock irqsaveMichael Grzeschik1-3/+4
This patch prevents the arcnet driver from the following deadlock. [ 41.273910] ====================================================== [ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted [ 41.292366] ------------------------------------------------------ [ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.315199] [ 41.315199] and this task is already holding: [ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.329593] which would create a new lock dependency: [ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...} [ 41.341801] [ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 41.350108] (_xmit_ARCNET#2){+.-...} ... which became SOFTIRQ-irq-safe at: [ 41.357539] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.362677] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.367723] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.372759] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.378340] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.383469] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.388138] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.393728] [<c0014578>] __irq_svc+0x58/0x78 [ 41.398402] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.403443] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.409029] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.414170] [ 41.414170] to a SOFTIRQ-irq-unsafe lock: [ 41.419931] (&(&lp->lock)->rlock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 41.427996] ... [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.433409] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.439646] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.445063] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.450661] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.455700] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.460649] [<c0050f10>] kthread+0xe4/0xf8 [ 41.465158] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.470207] [ 41.470207] other info that might help us debug this: [ 41.470207] [ 41.478627] Possible interrupt unsafe locking scenario: [ 41.478627] [ 41.485763] CPU0 CPU1 [ 41.490521] ---- ---- [ 41.495279] lock(&(&lp->lock)->rlock); [ 41.499414] local_irq_disable(); [ 41.505636] lock(_xmit_ARCNET#2); [ 41.511967] lock(&(&lp->lock)->rlock); [ 41.518741] <Interrupt> [ 41.521490] lock(_xmit_ARCNET#2); [ 41.525356] [ 41.525356] *** DEADLOCK *** [ 41.525356] [ 41.531587] 1 lock held by arcecho/233: [ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.544355] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 { [ 41.557357] HARDIRQ-ON-W at: [ 41.560664] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.567445] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.574866] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.581646] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.588613] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.596120] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.602991] [<c004af30>] process_one_work+0x188/0x40c [ 41.610131] [<c004b200>] worker_thread+0x4c/0x480 [ 41.616912] [<c0050f10>] kthread+0xe4/0xf8 [ 41.623048] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.629735] IN-SOFTIRQ-W at: [ 41.633039] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.639820] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.646508] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.653190] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.660425] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.667201] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.673518] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.680754] [<c0014578>] __irq_svc+0x58/0x78 [ 41.687077] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.693769] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.701006] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.707791] INITIAL USE at: [ 41.711003] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.717696] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.725026] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.731718] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.738593] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.746011] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.752789] [<c004af30>] process_one_work+0x188/0x40c [ 41.759847] [<c004b200>] worker_thread+0x4c/0x480 [ 41.766541] [<c0050f10>] kthread+0xe4/0xf8 [ 41.772596] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.779198] } [ 41.780945] ... key at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8 [ 41.788192] ... acquired at: [ 41.791309] [<c007bed8>] lock_acquire+0x70/0x90 [ 41.796361] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 41.802324] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.808844] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 41.814622] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 41.820034] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 41.825091] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 41.829956] [<c05ffda8>] SyS_send+0x18/0x20 [ 41.834638] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 41.839954] [ 41.841514] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 { [ 41.855644] HARDIRQ-ON-W at: [ 41.858945] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.865726] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.873607] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.880666] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.887901] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.894593] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.901195] [<c0050f10>] kthread+0xe4/0xf8 [ 41.907338] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.914025] SOFTIRQ-ON-W at: [ 41.917328] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.924106] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.931981] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.939028] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.946264] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.952954] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.959548] [<c0050f10>] kthread+0xe4/0xf8 [ 41.965689] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.972379] INITIAL USE at: [ 41.975595] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.982283] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.990063] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.997027] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 42.004172] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 42.010766] [<c0087548>] irq_thread+0x13c/0x1dc [ 42.017267] [<c0050f10>] kthread+0xe4/0xf8 [ 42.023314] [<c000f810>] ret_from_fork+0x14/0x24 [ 42.029903] } [ 42.031648] ... key at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet] [ 42.039255] ... acquired at: [ 42.042372] [<c007bed8>] lock_acquire+0x70/0x90 [ 42.047413] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 42.053364] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 42.059872] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 42.065634] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 42.071030] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 42.076069] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 42.080926] [<c05ffda8>] SyS_send+0x18/0x20 [ 42.085601] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 42.090918] [ 42.092481] [ 42.092481] stack backtrace: [ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536 [ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree) [ 42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14) [ 42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c) [ 42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c) [ 42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0) [ 42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0) [ 42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90) [ 42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54) [ 42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet]) [ 42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8) [ 42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680) [ 42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24) [ 42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0) [ 42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20) [ 42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: removed unneeded zero assignment of flags Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29rocker: move dereference before freeDan Carpenter1-1/+1
My static checker complains that ofdpa_neigh_del() can sometimes free "found". It just makes sense to use it first before deleting it. Fixes: ecf244f753e0 ("rocker: fix maybe-uninitialized warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29mlxsw: spectrum_router: Fix NULL pointer dereferenceIdo Schimmel1-0/+3
In case a VLAN device is enslaved to a bridge we shouldn't create a router interface (RIF) for it when it's configured with an IP address. This is already handled by the driver for other types of netdevs, such as physical ports and LAG devices. If this IP address is then removed and the interface is subsequently unlinked from the bridge, a NULL pointer dereference can happen, as the original 802.1d FID was replaced with an rFID which was then deleted. To reproduce: $ ip link set dev enp3s0np9 up $ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111 $ ip link set dev enp3s0np9.111 up $ ip link add name br0 type bridge $ ip link set dev br0 up $ ip link set enp3s0np9.111 master br0 $ ip address add dev enp3s0np9.111 192.168.0.1/24 $ ip address del dev enp3s0np9.111 192.168.0.1/24 $ ip link set dev enp3s0np9.111 nomaster Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Petr Machata <petrm@mellanox.com> Tested-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net: sched: Fix one possible panic when no destroy callbackGao Feng1-1/+2
When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on. Take codel as an example following: When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed. Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result. Now add one the check for destroy to avoid the possible panic. Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29virtio-net: serialize tx routine during resetJason Wang1-0/+1
We don't hold any tx lock when trying to disable TX during reset, this would lead a use after free since ndo_start_xmit() tries to access the virtqueue which has already been freed. Fix this by using netif_tx_disable() before freeing the vqs, this could make sure no tx after vq freeing. Reported-by: Jean-Philippe Menil <jpmenil@gmail.com> Tested-by: Jean-Philippe Menil <jpmenil@gmail.com> Fixes commit f600b6905015 ("virtio_net: Add XDP support") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Robert McCabe <robert.mccabe@rockwellcollins.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-28arch: remove unused macro/function thread_saved_pc()Tobias Klauser41-270/+0
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-28block: provide bio_uninit() free freeing integrity/task associationsJens Axboe3-4/+14
Wen reports significant memory leaks with DIF and O_DIRECT: "With nvme devive + T10 enabled, On a system it has 256GB and started logging /proc/meminfo & /proc/slabinfo for every minute and in an hour it increased by 15968128 kB or ~15+GB.. Approximately 256 MB / minute leaking. /proc/meminfo | grep SUnreclaim... SUnreclaim: 6752128 kB SUnreclaim: 6874880 kB SUnreclaim: 7238080 kB .... SUnreclaim: 22307264 kB SUnreclaim: 22485888 kB SUnreclaim: 22720256 kB When testcases with T10 enabled call into __blkdev_direct_IO_simple, code doesn't free memory allocated by bio_integrity_alloc. The patch fixes the issue. HTX has been run with +60 hours without failure." Since __blkdev_direct_IO_simple() allocates the bio on the stack, it doesn't go through the regular bio free. This means that any ancillary data allocated with the bio through the stack is not freed. Hence, we can leak the integrity data associated with the bio, if the device is using DIF/DIX. Fix this by providing a bio_uninit() and export it, so that we can use it to free this data. Note that this is a minimal fix for this issue. Any current user of bio's that are allocated outside of bio_alloc_bioset() suffers from this issue, most notably some drivers. We will fix those in a more comprehensive patch for 4.13. This also means that the commit marked as being fixed by this isn't the real culprit, it's just the most obvious one out there. Fixes: 542ff7bf18c6 ("block: new direct I/O implementation") Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28drm/etnaviv: Fix implicit/explicit sync sense inversionDaniel Stone1-1/+1
We were reading the no-implicit sync flag the wrong way around, synchronizing too much for the explicit case, and not at all for the implicit case. Oops. Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-06-28drm/etnaviv: fix submit flags getting overwritten by BO contentLucas Stach1-1/+2
The addition of the flags member to etnaviv_gem_submit structure didn't take into account that the last member of this structure is a variable length array. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-06-27NFSv4.1: nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()Trond Myklebust1-1/+0
The current code works only for the case where we have exactly one slot, which is no longer true. nfs4_free_slot() will automatically declare the callback channel to be drained when all slots have been returned. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-06-27Revert "NFS: nfs_rename() handle -ERESTARTSYS dentry left behind"Benjamin Coddington1-27/+24
This reverts commit 920b4530fb80430ff30ef83efe21ba1fa5623731 which could call d_move() without holding the directory's i_mutex, and reverts commit d4ea7e3c5c0e341c15b073016dbf3ab6c65f12f3 "NFS: Fix old dentry rehash after move", which was a follow-up fix. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Fixes: 920b4530fb80 ("NFS: nfs_rename() handle -ERESTARTSYS dentry left behind") Cc: stable@vger.kernel.org # v4.10+ Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-06-27NFSv4.1: Fix a race in nfs4_proc_layoutgetTrond Myklebust1-1/+1
If the task calling layoutget is signalled, then it is possible for the calls to nfs4_sequence_free_slot() and nfs4_layoutget_prepare() to race, in which case we leak a slot. The fix is to move the call to nfs4_sequence_free_slot() into the nfs4_layoutget_release() so that it gets called at task teardown time. Fixes: 2e80dbe7ac51 ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-06-27NFS: Trunking detection should handle ERESTARTSYS/EINTRTrond Myklebust1-0/+2
Currently, it will return EIO in those cases. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-06-27nvme/pci: Fix stuck nvme resetKeith Busch1-1/+2
The controller state is set to resetting prior to disabling the controller, so this patch accounts for that state when deciding if it needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0' blocks forever because the queues were never frozen. Fixes: 82b057caefaf ("nvme-pci: fix multiple ctrl removal scheduling") Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27net: usb: asix88179_178a: Add support for the Belkin B2B128Andrew F. Davis1-0/+16
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com> who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27fsl/fman: add dependency on HAS_DMAMadalin Bucur1-0/+1
A previous commit (5567e989198b5a8d) inserted a dependency on DMA API that requires HAS_DMA to be added in Kconfig. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27dm thin: do not queue freed thin mapping for next stage processingVallish Vaidyeshwara1-13/+13
process_prepared_discard_passdown_pt1() should cleanup dm_thin_new_mapping in cases of error. dm_pool_inc_data_range() can fail trying to get a block reference: metadata operation 'dm_pool_inc_data_range' failed: error = -61 When dm_pool_inc_data_range() fails, dm thin aborts current metadata transaction and marks pool as PM_READ_ONLY. Memory for thin mapping is released as well. However, current thin mapping will be queued onto next stage as part of queue_passdown_pt2() or passdown_endio(). This dangling thin mapping memory when processed and accessed in next stage will lead to device mapper crashing. Code flow without fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> discard passdown --> passdown_endio(m) queues m onto next stage -> dm_pool_inc_data_range() fails, frees memory m but does not remove it from next stage queue -> process_prepared_discard_passdown_pt2(m) -> processes freed memory m and crashes One such stack: Call Trace: [<ffffffffa037a46f>] dm_cell_release_no_holder+0x2f/0x70 [dm_bio_prison] [<ffffffffa039b6dc>] cell_defer_no_holder+0x3c/0x80 [dm_thin_pool] [<ffffffffa039b88b>] process_prepared_discard_passdown_pt2+0x4b/0x90 [dm_thin_pool] [<ffffffffa0399611>] process_prepared+0x81/0xa0 [dm_thin_pool] [<ffffffffa039e735>] do_worker+0xc5/0x820 [dm_thin_pool] [<ffffffff8152bf54>] ? __schedule+0x244/0x680 [<ffffffff81087e72>] ? pwq_activate_delayed_work+0x42/0xb0 [<ffffffff81089f53>] process_one_work+0x153/0x3f0 [<ffffffff8108a71b>] worker_thread+0x12b/0x4b0 [<ffffffff8108a5f0>] ? rescuer_thread+0x350/0x350 [<ffffffff8108fd6a>] kthread+0xca/0xe0 [<ffffffff8108fca0>] ? kthread_park+0x60/0x60 [<ffffffff81530b45>] ret_from_fork+0x25/0x30 The fix is to first take the block ref count for discarded block and then do a passdown discard of this block. If block ref count fails, then bail out aborting current metadata transaction, mark pool as PM_READ_ONLY and also free current thin mapping memory (existing error handling code) without queueing this thin mapping onto next stage of processing. If block ref count succeeds, then passdown discard of this block. Discard callback of passdown_endio() will queue this thin mapping onto next stage of processing. Code flow with fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> dm_pool_inc_data_range() --> if fails, free memory m and bail out -> discard passdown --> passdown_endio(m) queues m onto next stage Cc: stable <stable@vger.kernel.org> # v4.9+ Reviewed-by: Eduardo Valentin <eduval@amazon.com> Reviewed-by: Cristian Gafton <gafton@amazon.com> Reviewed-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com> Reviewed-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-27net: prevent sign extension in dev_get_stats()Eric Dumazet1-3/+3
Similar to the fix provided by Dominik Heidler in commit 9b3dc0a17d73 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5f23ce ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688f57ca ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d315a76 ("net: add rx_nohandler stat counter") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgrDeepak Rawat1-0/+1
The hash table created during vmw_cmdbuf_res_man_create was never freed. This causes memory leak in context creation. Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy. Tested for memory leak by running piglit overnight and kernel memory is not inflated which earlier was. Cc: <stable@vger.kernel.org> Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-26drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocationsChris Wilson1-3/+14
If we write a relocation into the buffer, we require our own implicit synchronisation added after the start of the execbuf, outside of the user's control. As we may end up clflushing, or doing the patch itself on the GPU, asynchronously we need to look at the implicit serialisation on obj->resv and hence need to disable EXEC_OBJECT_ASYNC for this object. If the user does trigger a stall for relocations, we make sure the stall is complete enough so that the batch is not submitted before we complete those relocations. Fixes: 77ae9957897d ("drm/i915: Enable userspace to opt-out of implicit fencing") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 071750e550af46b5d3a84ad56c2a108c3e136284) [danvet: Resolve conflicts, resolution reviewed by Tvrtko on irc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-06-26drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_objectChris Wilson1-1/+5
As we walk the obj->vma_list in per_file_stats(), we need to hold struct_mutex to prevent alteration of that list. Fixes: 1d2ac403ae3b ("drm: Protect dev->filelist with its own mutex") Fixes: c84455b4bacc ("drm/i915: Move debug only per-request pid tracking from request to ctx") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101460 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170617115744.4452-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit 0caf81b5c53d9bd332a95dbcb44db8de0b397a7c) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-06-26drm/i915: Retire the VMA's fence tracker before unbindingChris Wilson1-0/+5
Since we may track unfenced access (GPU access to the vma that explicitly requires no fence), vma->last_fence may be set without any attached fence (vma->fence) and so will not be flushed when we call i915_vma_put_fence(). Since we stopped doing a full retire of the activity trackers for unbind, we need to explicitly retire each tracker. Fixes: b0decaf75bd9 ("drm/i915: Track active vma requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170620124321.1108-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> (cherry picked from commit 760a898d8069111704e1bd43f00ebf369ae46e57) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-06-25Linux 4.12-rc7Linus Torvalds1-1/+1
2017-06-25tcp: reset sk_rx_dst in tcp_disconnect()WANG Cong1-0/+2
We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Reported-by: Andrei Vagin <avagin@gmail.com> Reported-by: Kevin Xu <kaiwen.xu@hulu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: ipv6: reset daddr and dport in sk if connect() failsWei Wang2-2/+9
In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if error occurs. In udp_v6_early_demux(), check for sk_state to make sure it is in TCP_ESTABLISHED state. Together, it makes sure unconnected UDP socket won't be considered as a valid candidate for early demux. v3: add TCP_ESTABLISHED state check in udp_v6_early_demux() v2: fix compilation error Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25bnx2x: Don't log mc removal needlesslyMintz, Yuval1-1/+1
When mc configuration changes bnx2x_config_mcast() can return 0 for success, negative for failure and positive for benign reason preventing its immediate work, e.g., when the command awaits the completion of a previously sent command. When removing all configured macs on a 578xx adapter, if a positive value would be returned driver would errneously log it as an error. Fixes: c7b7b483ccc9 ("bnx2x: Don't flush multicast MACs") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-24x86/mshyperv: Remove excess #includes from mshyperv.hThomas Gleixner1-2/+1
A recent commit included linux/slab.h in linux/irq.h. This breaks the build of vdso32 on a 64-bit kernel. The reason is that linux/irq.h gets included into the vdso code via linux/interrupt.h which is included from asm/mshyperv.h. That makes the 32-bit vdso compile fail, because slab.h includes the pgtable headers for 64-bit on a 64-bit build. Neither linux/clocksource.h nor linux/interrupt.h are needed in the mshyperv.h header file itself - it has a dependency on <linux/atomic.h>. Remove the includes and unbreak the build. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: devel@linuxdriverproject.org Fixes: dee863b571b0 ("hv: export current Hyper-V clocksource") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-23fs/exec.c: account for argv/envp pointersKees Cook1-4/+24
When limiting the argv/envp strings during exec to 1/4 of the stack limit, the storage of the pointers to the strings was not included. This means that an exec with huge numbers of tiny strings could eat 1/4 of the stack limit in strings and then additional space would be later used by the pointers to the strings. For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721 single-byte strings would consume less than 2MB of stack, the max (8MB / 4) amount allowed, but the pointers to the strings would consume the remaining additional stack space (1677721 * 4 == 6710884). The result (1677721 + 6710884 == 8388605) would exhaust stack space entirely. Controlling this stack exhaustion could result in pathological behavior in setuid binaries (CVE-2017-1000365). [akpm@linux-foundation.org: additional commenting from Kees] Fixes: b6a2fea39318 ("mm: variable length argument support") Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23ocfs2: fix deadlock caused by recursive locking in xattrEric Ren2-10/+17
Another deadlock path caused by recursive locking is reported. This kind of issue was introduced since commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()"). Two deadlock paths have been fixed by commit b891fa5024a9 ("ocfs2: fix deadlock issue when taking inode lock at vfs entry points"). Yes, we intend to fix this kind of case in incremental way, because it's hard to find out all possible paths at once. This one can be reproduced like this. On node1, cp a large file from home directory to ocfs2 mountpoint. While on node2, run setfacl/getfacl. Both nodes will hang up there. The backtraces: On node1: __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2] ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2] ocfs2_write_begin+0x43/0x1a0 [ocfs2] generic_perform_write+0xa9/0x180 __generic_file_write_iter+0x1aa/0x1d0 ocfs2_file_write_iter+0x4f4/0xb40 [ocfs2] __vfs_write+0xc3/0x130 vfs_write+0xb1/0x1a0 SyS_write+0x46/0xa0 On node2: __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2] ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2] ocfs2_xattr_set+0x12e/0xe80 [ocfs2] ocfs2_set_acl+0x22d/0x260 [ocfs2] ocfs2_iop_set_acl+0x65/0xb0 [ocfs2] set_posix_acl+0x75/0xb0 posix_acl_xattr_set+0x49/0xa0 __vfs_setxattr+0x69/0x80 __vfs_setxattr_noperm+0x72/0x1a0 vfs_setxattr+0xa7/0xb0 setxattr+0x12d/0x190 path_setxattr+0x9f/0xb0 SyS_setxattr+0x14/0x20 Fix this one by using ocfs2_inode_{lock|unlock}_tracker, which is exported by commit 439a36b8ef38 ("ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock"). Link: http://lkml.kernel.org/r/20170622014746.5815-1-zren@suse.com Fixes: 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") Signed-off-by: Eric Ren <zren@suse.com> Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23slub: make sysfs file removal asynchronousTejun Heo2-14/+27
Commit bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") made slub sysfs file removals synchronous to kmem_cache shutdown. Unfortunately, this created a possible ABBA deadlock between slab_mutex and sysfs draining mechanism triggering the following lockdep warning. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-test+ #48 Not tainted ------------------------------------------------------- rmmod/1211 is trying to acquire lock: (s_active#120){++++.+}, at: [<ffffffff81308073>] kernfs_remove+0x23/0x40 but task is already holding lock: (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.+.}: lock_acquire+0xf6/0x1f0 __mutex_lock+0x75/0x950 mutex_lock_nested+0x1b/0x20 slab_attr_store+0x75/0xd0 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x13c/0x1c0 __vfs_write+0x28/0x120 vfs_write+0xc8/0x1e0 SyS_write+0x49/0xa0 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #0 (s_active#120){++++.+}: __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(s_active#120); lock(slab_mutex); lock(s_active#120); *** DEADLOCK *** 2 locks held by rmmod/1211: #0: (cpu_hotplug.dep_map){++++++}, at: [<ffffffff810a7877>] get_online_cpus+0x37/0x80 #1: (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0 stack backtrace: CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: print_circular_bug+0x1be/0x210 __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 ? SyS_delete_module+0x5/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 It'd be the cleanest to deal with the issue by removing sysfs files without holding slab_mutex before the rest of shutdown; however, given the current code structure, it is pretty difficult to do so. This patch punts sysfs file removal to a work item. Before commit bf5eb3de3847, the removal was punted to a RCU delayed work item which is executed after release. Now, we're punting to a different work item on shutdown which still maintains the goal removing the sysfs files earlier when destroying kmem_caches. Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org Fixes: bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23lib/cmdline.c: fix get_options() overflow while parsing rangesIlya Matveychikov1-3/+3
When using get_options() it's possible to specify a range of numbers, like 1-100500. The problem is that it doesn't track array size while calling internally to get_range() which iterates over the range and fills the memory with numbers. Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23fs/dax.c: fix inefficiency in dax_writeback_mapping_range()Jan Kara1-0/+1
dax_writeback_mapping_range() fails to update iteration index when searching radix tree for entries needing cache flushing. Thus each pagevec worth of entries is searched starting from the start which is inefficient and prone to livelocks. Update index properly. Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz Fixes: 9973c98ecfda3 ("dax: add support for fsync/sync") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAILNeilBrown1-1/+1
If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl, autofs4_d_automount() will return ERR_PTR(status) with that status to follow_automount(), which will then dereference an invalid pointer. So treat a positive status the same as zero, and map to ENOENT. See comment in systemd src/core/automount.c::automount_send_ready(). Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Cc: Ian Kent <raven@themaw.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappingsArd Biesheuvel1-2/+13
Existing code that uses vmalloc_to_page() may assume that any address for which is_vmalloc_addr() returns true may be passed into vmalloc_to_page() to retrieve the associated struct page. This is not un unreasonable assumption to make, but on architectures that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need to ensure that vmalloc_to_page() does not go off into the weeds trying to dereference huge PUDs or PMDs as table entries. Given that vmalloc() and vmap() themselves never create huge mappings or deal with compound pages at all, there is no correct answer in this case, so return NULL instead, and issue a warning. When reading /proc/kcore on arm64, you will hit an oops as soon as you hit the huge mappings used for the various segments that make up the mapping of vmlinux. With this patch applied, you will no longer hit the oops, but the kcore contents willl be incorrect (these regions will be zeroed out) We are fixing this for kcore specifically, so it avoids vread() for those regions. At least one other problematic user exists, i.e., /dev/kmem, but that is currently broken on arm64 for other reasons. Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23mm, thp: remove cond_resched from __collapse_huge_page_copyDavid Rientjes1-1/+0
This is a partial revert of commit 338a16ba1549 ("mm, thp: copying user pages must schedule on collapse") which added a cond_resched() to __collapse_huge_page_copy(). On x86 with CONFIG_HIGHPTE, __collapse_huge_page_copy is called in atomic context and thus scheduling is not possible. This is only a possible config on arm and i386. Although need_resched has been shown to be set for over 100 jiffies while doing the iteration in __collapse_huge_page_copy, this is better than doing if (in_atomic()) cond_resched() to cover only non-CONFIG_HIGHPTE configs. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706191341550.97821@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-23bnxt_en: Fix netpoll handling.Michael Chan1-6/+48
To handle netpoll properly, the driver must only handle TX packets during NAPI. Handling RX events cause warnings and errors in netpoll mode. The ndo_poll_controller() method should call napi_schedule() directly so that a NAPI weight of zero will be used during netpoll mode. The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx. In separate rx/tx mode, the ndo_poll_controller() method will only process the tx rings. In combined mode, the rx and tx completion entries are mixed in the completion ring and we need to drop the rx entries and recycle the rx buffers. Add a function bnxt_force_rx_discard() to handle this in netpoll mode when we see rx entries in combined ring mode. Reported-by: Calvin Owens <calvinowens@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23bnxt_en: Add missing logic to handle TPA end error conditions.Michael Chan2-4/+9
When we get a TPA_END completion to handle a completed LRO packet, it is possible that hardware would indicate errors. The current code is not checking for the error condition. Define the proper error bits and the macro to check for this error and abort properly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23net: dp83640: Avoid NULL pointer dereference.Richard Cochran1-1/+1
The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23sit: use __GFP_NOWARN for user controlled allocationWANG Cong1-1/+1
The memory allocation size is controlled by user-space, if it is too large just fail silently and return NULL, not to mention there is a fallback allocation later. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23net: account for current skb length when deciding about UFOMichal Kubeček2-2/+3
Our customer encountered stuck NFS writes for blocks starting at specific offsets w.r.t. page boundary caused by networking stack sending packets via UFO enabled device with wrong checksum. The problem can be reproduced by composing a long UDP datagram from multiple parts using MSG_MORE flag: sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 3000, 0, ...); Assume this packet is to be routed via a device with MTU 1500 and NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(), this condition is tested (among others) to decide whether to call ip_ufo_append_data(): ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb)) At the moment, we already have skb with 1028 bytes of data which is not marked for GSO so that the test is false (fragheaderlen is usually 20). Thus we append second 1000 bytes to this skb without invoking UFO. Third sendto(), however, has sufficient length to trigger the UFO path so that we end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb() uses udp_csum() to calculate the checksum but that assumes all fragments have correct checksum in skb->csum which is not true for UFO fragments. When checking against MTU, we need to add skb->len to length of new segment if we already have a partially filled skb and fragheaderlen only if there isn't one. In the IPv6 case, skb can only be null if this is the first segment so that we have to use headersize (length of the first IPv6 header) rather than fragheaderlen (length of IPv6 header of further fragments) for skb == NULL. Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Fixes: e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23dm raid: fix oops on upgrading to extended superblock formatHeinz Mauelshagen1-3/+14
When a RAID set was created on dm-raid version < 1.9.0 (old RAID superblock format), all of the new 1.9.0 members of the superblock are uninitialized (zero) -- including the device sectors member needed to support shrinking. All the other accesses to superblock fields new in 1.9.0 were reviewed and verified to be properly guarded against invalid use. The 'sectors' member was the only one used when the superblock version is < 1.9. Don't access the superblock's >= 1.9.0 'sectors' member unconditionally. Also add respective comments. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-23Input: synaptics-rmi4 - only read the F54 query registers which are usedAndrew Duggan1-10/+7
The F54 driver is currently only using the first 6 bytes of F54 so there is no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and similar) have an issue with the touchpad or I2C bus when reading reports larger then 16 bytes. Reads larger then 16 bytes are reported in two HID reports. Something about the back to back reports seems to cause the next read to report incorrect data. This results in F30 failing to load and the click button failing to work. Previous issues with the I2C controller or touchpad were addressed in: commit 5b65c2a02966 ("HID: rmi: check sanity of the incoming report") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-23powerpc/64: Initialise thread_info for emergency stacksNicholas Piggin1-3/+28
Emergency stacks have their thread_info mostly uninitialised, which in particular means garbage preempt_count values. Emergency stack code runs with interrupts disabled entirely, and is used very rarely, so this has been unnoticed so far. It was found by a proposed new powerpc watchdog that takes a soft-NMI directly from the masked_interrupt handler and using the emergency stack. That crashed at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be garbage. To fix this, zero the entire THREAD_SIZE allocation, and initialize the thread_info. Cc: stable@vger.kernel.org Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Move it all into setup_64.c, use a function not a macro. Fix crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.