aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2024-10-24amdgpu: Don't print L2 status if there's nothing to printKent Russell4-3/+18
If a 2nd fault comes in before the 1st is handled, the 1st fault will clear out the FAULT STATUS registers before the 2nd fault is handled. Thus we get a lot of zeroes. If status=0, just skip the L2 fault status information, to avoid confusion of why some VM fault status prints in dmesg are all zeroes. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amd/display: add missing tracepoint event in DM atomic_commit_tailMelissa Wen1-0/+2
There are two events to trace the beginning and the end of amdgpu_dm_atomic_commit_tail, but only the one ate the beginning was placed. Place amdgpu_dm_atomic_commit_tail_finish tracepoint at the end than. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdkfd: sever xgmi io link if host driver has disable sharingJonathan Kim3-0/+22
Host drivers can create partial hives per guest by disabling xgmi sharing between certain peers in the main hive. Typically, these partial hives are fully connected per guest session. In the event that the host makes a mistake by adding a non-shared node to a guest session, have the KFD reflect sharing disabled by severing the IO link. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: James Yao <yiqing.yao@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdgpu: refine error handling in amdgpu_ttm_tt_pin_userptrLang Yu1-1/+3
Free sg table when dma_map_sgtable() failed to avoid memory leak. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdgpu: Fix the logic for NPS request failureLijo Lazar1-12/+16
On a hive, NPS request is placed by the first one for all devices in the hive. If the request fails, mark the mode as UNKNOWN so that subsequent devices on unload don't request it. Also, fix the mutex double lock issue in error condition, should have been mutex_unlock. Fixes: ee52489d1210 ("drm/amdgpu: Place NPS mode request on unload") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdkfd: remove extra use of volatileVictor Zhao2-2/+2
as the adding of mb() should be sufficient in function unmap_queues_cpsch, remove the add of volatile type as recommended Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdgpu: Reduce redundant gpu resets on nbio v7.4YiPeng Chai1-2/+1
On nbio v7.4, ras controller interrupt and athub interrupt are generated after injecting UE to PCIE, but gpu reset only needs to be triggered once. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: handle default profile on on devices without fullscreen 3DAlex Deucher1-1/+10
Some devices do not support fullscreen 3D. v2: Make the check generic. Fixes: 336568de918e ("drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com>
2024-10-22Revert "drm/amdkfd: SMI report dropped event count"Alex Deucher2-29/+4
This reverts commit a3ab2d45b9887ee609cd3bea39f668236935774c. The userspace side for this code is not ready yet so revert for now. Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Philip Yang <Philip.Yang@amd.com>
2024-10-22drm/amdgpu: Dereference the ATCS ACPI bufferPrike Liang1-0/+1
Need to dereference the atcs acpi buffer after the method is executed, otherwise it will result in a memory leak. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: Save VCN shared memory with init resetLijo Lazar3-10/+23
VCN shared memory is in framebuffer and there are some flags initialized during sw_init. Ideally, such programming should be during hw_init. Make sure the flags are saved during reset on initialization since that reset will affect frame buffer region. For clarity, separate it out to another function. Fixes: 1e4acf4d93cd ("drm/amdgpu: Add reset on init handler for XGMI") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reported-by: Hao Zhou <hao.zhou@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean unused functions of uvd/vcn/vceSunil Khatri3-551/+0
Some of the functions pointers of amdgpu_ip_funcs are not used and are left commented out. Hence this cleans those up which arent used. Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Disable PSR-SU on Parade 08-01 TCON tooMario Limonciello1-0/+2
Stuart Hayhurst has found that both at bootup and fullscreen VA-API video is leading to black screens for around 1 second and kernel WARNING [1] traces when calling dmub_psr_enable() with Parade 08-01 TCON. These symptoms all go away with PSR-SU disabled for this TCON, so disable it for now while DMUB traces [2] from the failure can be analyzed and the failure state properly root caused. Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/uploads/a832dd515b571ee171b3e3b566e99a13/dmesg.log [1] Link: https://gitlab.freedesktop.org/drm/amd/uploads/8f13ff3b00963c833e23e68aa8116959/output.log [2] Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2645 Reviewed-by: Leo Li <sunpeng.li@amd.com> Link: https://lore.kernel.org/r/20240205211233.2601-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for vega20_ihVictor Lu1-0/+27
Port this change to vega20_ih.c: commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts") Original commit message: "Why: Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit if RB_ENABLE is not set. How to fix: Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set. The RB_ENABLE bit is required to be set, together with WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit would clear the RB_OVERFLOW." Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: Clean the functions pointer set as NULLSunil Khatri68-228/+0
We dont need to set the functions to NULL which arent needed as global structure members are by default set to zero or NULL for pointers. Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy soft_reset functionsSunil Khatri16-96/+0
Remove the dummy soft_reset functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy wait_for_idle functionsSunil Khatri16-96/+1
Remove the dummy wait_for_idle functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy suspend functionsSunil Khatri4-19/+2
Remove the dummy suspend functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy resume functionsSunil Khatri1-6/+0
Remove the dummy resume functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate wait_for_idle before function callSunil Khatri1-3/+6
Before making a function call to wait_for_idle, validate the function pointer like we do in sw_init. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate resume before function callSunil Khatri5-60/+49
Before making a function call to resume, validate the function pointer like we do in sw_init. Use the helper function amdgpu_ip_block_resume where same checks and calls are repeated. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate suspend before function callSunil Khatri6-46/+31
Before making a function call to suspend, validate the function pointer like we do in sw_init. Use the helper function amdgpu_ip_block_suspend where same checks and calls are repeated. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate hw_fini before function callSunil Khatri1-16/+22
Before making a function call to hw_fini, validate the function pointer like we do in sw_init. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdkfd: fix the hang caused by the write reorder to fence_addrVictor Zhao2-2/+3
make sure KFD_FENCE_INIT write to fence_addr before pm_send_query_status called, to avoid qcm fence timeout caused by incorrect ordering. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu/gfx9: Add cleaner shader for GFX9.4.2Srinivasan Shanmugam3-1/+208
This commit adds the cleaner shader microcode for GFX9.4.2 GPUs. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. Without the cleaner shader, residual data from a previous workload could potentially be accessed by a subsequent workload, leading to data leaks and incorrect computation results. The cleaner shader microcode is represented as an array of 32-bit words (`gfx_9_4_2_cleaner_shader_hex`). This array is the binary representation of the cleaner shader code, which is written in a low-level GPU instruction set. Also, this patch updates the `gfx_v9_0_sw_init` function to initialize the cleaner shader if the MEC firmware version is 88 or higher. It sets the `cleaner_shader_ptr` and `cleaner_shader_size` to the appropriate values and attempts to initialize the cleaner shader. When the cleaner shader feature is enabled, the AMDGPU driver loads this array into a specific location in the GPU memory. The GPU then reads this memory location to fetch and execute the cleaner shader instructions. The cleaner shader is executed automatically by the GPU at the end of each workload, before the next workload starts. This ensures that all GPU resources are in a clean state before the start of each workload. This change ensures that the GPU memory is properly cleared between different processes, preventing data leakage and enhancing security. It also aligns with the serialization mechanism between KGD and KFD, ensuring that the GPU state is consistent across different workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: fix typo for sdma6 constant fill packetFrank Min1-1/+1
Fix typo for sdma6 constant fill packet Signed-off-by: Frank Min <Frank.Min@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: fix random data corruption for sdma 7Frank Min1-1/+8
There is random data corruption caused by const fill, this is caused by write compression mode not correctly configured. So correct compression mode for const fill. Signed-off-by: Frank Min <Frank.Min@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: 3.2.306Aric Cyr1-1/+1
This version brings along following fixes: - Fix dcn401 idle optimization problem - Fix cursor corruption on dcn35 - Fix DP LL compliance failures - Fix SubVP Phantom VBlank End calculation Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: To change dcn301_init.h guard.Bhuvanachandra Pinninti1-2/+2
[why & How] The original guard is wrongly to be set as for dcn30. Changed it from 30 to 301. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: update fullscreen status to SPLSamson Tam4-2/+9
[Why] Current fullscreen check in SPL using dm_helpers is out-of-sync with dc state. This causes an issue during minimal transition where we pick an invalid intermediate state because the pre and post fullscreen status are different. [How] Add sharpening_required flag to dc_stream_state. Use this flag to indicate if we are in fullscreen or not. Propagate flag to SPL for fullscreen status. Remove workaround in DML Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Add a Precise Delay RoutineFangzhi Zuo1-1/+1
Fix DP compliance failures 4.2.2.12, 4.3.1.21, 4.9.1.19 caused by imprecise delay on fsleep(). Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Recalculate SubVP Phantom VBlank End in dml21Dillon Varone2-0/+2
[WHY] The phantom stream timing is copied from the main stream as most parameters are identical, however some need to be recalculated. Currently VBlank End is not recalculated and copied from the main incorrectly. [HOW] Recalculate VBlank End for phantom stream timing. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: temp w/a for DP Link Layer complianceAurabindo Pillai1-0/+13
[Why&How] Disabling P-State support on full updates for DCN401 results in introducing additional communication with SMU. A UCLK hard min message to SMU takes 4 seconds to go through, which was due to DCN not allowing pstate switch, which was caused by incorrect value for TTU watermark before blanking the HUBP prior to DPG on for servicing the test request. Fix the issue temporarily by disallowing pstate changes for compliance test while test request handler is reworked for a proper fix. Fixes: 67ea53a4bd9d ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Adding array index check to prevent memory corruptionLeo Chen1-2/+4
[Why & How] Array indices out of bound caused memory corruption. Adding checks to ensure that array index stays in bound. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Reuse subvp enable check for DCN401Aurabindo Pillai1-1/+2
Reuse subvp enable check from DCN32 for IGT testing of Sub-Viewport feature on DCN401 Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: w/a to program DISPCLK_R_GATE_DISABLE DCN35Yihan Zhu3-4/+20
[WHY & HOW] Cursor corruption observed on USBC display with specific system setup with a reboot. Cursor memory might still in the lightsleep state due to voltage issue, we need program DISPCLK_R_GATE_DISABLE to avoid this issue only on DCN35. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: temp w/a for dGPU to enter idle optimizationsAurabindo Pillai1-1/+2
[Why&How] vblank immediate disable currently does not work for all asics. On DCN401, the vblank interrupts never stop coming, and hence we never get a chance to trigger idle optimizations. Add a workaround to enable immediate disable only on APUs for now. This adds a 2-frame delay for triggering idle optimization, which is a negligible overhead. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Fixes: e45b6716de4b ("drm/amd/display: use a more lax vblank enable policy for DCN35+") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy sw_fini functionsSunil Khatri7-43/+0
Remove the dummy sw_fini functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Add hpd_source index check for dcn401 link encoder setupSrinivasan Shanmugam1-1/+1
This patch adds a boundary check for the hpd_source index during the link encoder creation process for all dcn401 ip. The check ensures that the index is within the valid range of the link_enc_hpd_regs array to prevent out-of-bounds access. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Add hpd_source index check for dcn10 link encoder setupSrinivasan Shanmugam1-1/+1
This patch adds a boundary check for the hpd_source index during the link encoder creation process for all dcn10 ip. The check ensures that the index is within the valid range of the link_enc_hpd_regs array to prevent out-of-bounds access. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Add hpd_source index check for DCE60/80/100/110/112/120 link encodersSrinivasan Shanmugam6-6/+6
This patch adds a boundary check for the hpd_source index during the link encoder creation process for all DCExxx IP's. The check ensures that the index is within the valid range of the link_enc_hpd_regs array to prevent out-of-bounds access. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: Use SPX as default in partition configLijo Lazar1-3/+7
In certain cases - ex: when a reset is required on initialization - XCP manager won't have a valid partition mode. In such cases, use SPX as the default selected mode for which partition configuration details are populated. Fixes: 4ae86dc87850 ("drm/amdgpu: Add sysfs nodes to get xcp details") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reported-by: Hao Zhou <hao.zhou@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate sw_fini before function callSunil Khatri1-6/+7
Before making a function call to sw_fini, validate the function pointer like we do in sw_init. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy sw_init functionsSunil Khatri3-18/+0
Remove the dummy sw_init functions for all IP blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate sw_init before function callSunil Khatri1-5/+7
Before making a function call to sw_init, validate the function pointer like we do in late_init. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdkfd: Not restore userptr buffer if kfd process has been removedXiaogang Chen1-4/+7
When kfd process has been terminated not restore userptr buffer after mmu notifier invalidates a range. Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/pm: update deep sleep status on smu v14.0.2/3Kenneth Feng1-1/+6
disable deep sleep during the compute workload for the potential performance loss on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/pm: update overdrive function on smu v14.0.2/3Kenneth Feng1-1/+1
update overdrive function on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: Zero-initialize mqd backup memoryLijo Lazar1-3/+3
Zero-initialize mqd backup memory, otherwise the check for 'already-backed-up' could go wrong. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3Kenneth Feng3-89/+102
update the driver-fw interface file for smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.