aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-05-17netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NATTom Rix1-0/+4
gcc with W=1 and ! CONFIG_NF_NAT net/netfilter/nf_conntrack_netlink.c:3463:32: error: ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=] 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = { | ^~~~~~~~~~~~~~~~~~ net/netfilter/nf_conntrack_netlink.c:2979:33: error: ‘any_addr’ defined but not used [-Werror=unused-const-variable=] 2979 | static const union nf_inet_addr any_addr; | ^~~~~~~~ These variables use is controlled by CONFIG_NF_NAT, so should their definitions. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-05-17net: wwan: t7xx: Ensure init is completed before system sleepKai-Heng Feng2-0/+19
When the system attempts to sleep while mtk_t7xx is not ready, the driver cannot put the device to sleep: [ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state [ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14 [ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14 [ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14 [ 12.764776] PM: Some devices failed to suspend, or early wake event detected Mediatek confirmed the device can take a rather long time to complete its initialization, so wait for up to 20 seconds until init is done. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17net: selftests: Fix optstringBenjamin Poirier1-1/+1
The cited commit added a stray colon to the 'v' option. That makes the option work incorrectly. ex: tools/testing/selftests/net# ./fib_nexthops.sh -v (should enable verbose mode, instead it shows help text due to missing arg) Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17net: pcs: xpcs: fix C73 AN not getting enabledVladimir Oltean1-1/+1
The XPCS expects clause 73 (copper backplane) autoneg to follow the ethtool autoneg bit. It actually did that until the blamed commit inaptly replaced state->an_enabled (coming from ethtool) with phylink_autoneg_inband() (coming from the device tree or struct phylink_config), as part of an unrelated phylink_pcs API conversion. Russell King suggests that state->an_enabled from the original code was just a proxy for the ethtool Autoneg bit, and that the correct way of restoring the functionality is to check for this bit in the advertising mask. Fixes: 11059740e616 ("net: pcs: xpcs: convert to phylink_pcs_ops") Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/ Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17net: wwan: iosm: fix NULL pointer dereference when removing deviceM Chetan Kumar3-12/+33
In suspend and resume cycle, the removal and rescan of device ends up in NULL pointer dereference. During driver initialization, if the ipc_imem_wwan_channel_init() fails to get the valid device capabilities it returns an error and further no resource (wwan struct) will be allocated. Now in this situation if driver removal procedure is initiated it would result in NULL pointer exception since unallocated wwan struct is dereferenced inside ipc_wwan_deinit(). ipc_imem_run_state_worker() to handle the called functions return value and to release the resource in failure case. It also reports the link down event in failure cases. The user space application can handle this event to do a device reset for restoring the device communication. Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface") Reported-by: Samuel Wein PhD <sam@samwein.com> Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/ Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()Eric Dumazet1-2/+2
syzbot triggered the following splat [1], sending an empty message through pppoe_sendmsg(). When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header() does not push extra bytes for the VLAN header, because vlan is offloaded. Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto before testing (vlan->flags & VLAN_FLAG_REORDER_HDR). We need to swap the two conditions. [1] BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 __netdev_start_xmit include/linux/netdevice.h:4883 [inline] netdev_start_xmit include/linux/netdevice.h:4897 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3053 [inline] pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774 slab_alloc_node mm/slub.c:3452 [inline] kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520 __alloc_skb+0x3a7/0x850 net/core/skbuff.c:606 alloc_skb include/linux/skbuff.h:1277 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583 pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17mailmap: add entries for Nikolay AleksandrovNikolay Aleksandrov1-0/+5
Turns out I missed a few patches due to use of old addresses by senders. Add a mailmap entry with my old addresses. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17igb: fix bit_shift to be in [1..8] rangeAleksandr Loktionov1-2/+2
In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offsetMarco Migliore1-1/+1
According to datasheet, the command opcode must be specified into bits [14:12] of the Extended Port Control register (EPC). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marco Migliore <m.migliore@tiesse.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17cassini: Fix a memory leak in the error handling path of cas_init_one()Christophe JAILLET1-0/+2
cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa40669cd7 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17tun: Fix memory leak for detached NAPI queue.Kuniyuki Iwashima1-0/+15
syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); write(fd_tun, buf, sizeof(buf)); close(fd_tun); If we enable NAPI and multi-queue on a TUN device, we can put skb into tfile->sk.sk_write_queue after the queue is detached. We should prevent it by checking tfile->detached before queuing skb. Note this must be done under tfile->sk.sk_write_queue.lock because write() and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would be a small race window: write() ioctl(IFF_DETACH_QUEUE) `- tun_get_user `- __tun_detach |- if (tfile->detached) |- tun_disable_queue | `-> false | `- tfile->detached = tun | `- tun_queue_purge |- spin_lock_bh(&queue->lock) `- __skb_queue_tail(queue, skb) Another solution is to call tun_queue_purge() when closing and reattaching the detached queue, but it could paper over another problems. Also, we do the same kind of test for IFF_NAPI_FRAGS. [0]: unreferenced object 0xffff88801edbc800 (size 2048): comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline] [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979 [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline] [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035 [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088 [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438 [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165 [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414 [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920 [<000000008eb24774>] do_open fs/namei.c:3636 [inline] [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791 [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818 [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356 [<00000000057be699>] do_sys_open fs/open.c:1372 [inline] [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline] [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline] [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff88802f671700 (size 240): comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s) hex dump (first 32 bytes): 68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h....... 00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............ backtrace: [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644 [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline] [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378 [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729 [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline] [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841 [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035 [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline] [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline] [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584 [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-16devlink: Fix crash with CONFIG_NET_NS=nIdo Schimmel1-1/+1
'__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this option is disabled it becomes '__initdata', which means the data can be freed after the initialization phase. This annotation is obviously incorrect for the devlink net device notifier block which is still registered after the initialization phase [1]. Fix this crash by removing the '__net_initdata' annotation. [1] general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] PREEMPT SMP CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc59b09 #64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 RIP: 0010:notifier_call_chain+0x58/0xc0 [...] Call Trace: <TASK> dev_set_mac_address+0x85/0x120 dev_set_mac_address_user+0x30/0x50 do_setlink+0x219/0x1270 rtnl_setlink+0xf7/0x1a0 rtnetlink_rcv_msg+0x142/0x390 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x188/0x270 netlink_sendmsg+0x214/0x470 __sys_sendto+0x12f/0x1a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: e93c9378e33f ("devlink: change per-devlink netdev notifier to static one") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/600ddf9e-589a-2aa0-7b69-a438f833ca10@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16iavf: send VLAN offloading caps once after VFRAhmed Zaki1-5/+0
When the user disables rxvlan offloading and then changes the number of channels, all VLAN ports are unable to receive traffic. Changing the number of channels triggers a VFR reset. During re-init, when VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do: 1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag 2 - call iavf_set_vlan_offload_features(adapter, 0, netdev->features); The second step sends to the PF the __default__ features, in this case aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING While the first step forces the watchdog task to call netdev_update_features() -> iavf_set_features() -> iavf_set_vlan_offload_features(adapter, netdev->features, features). Since the user disabled the "rxvlan", this sets: aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING When we start processing the AQ commands, both flags are enabled. Since we process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF enabling the rxvlan offload. This breaks all communications on the VLAN net devices. Fix by removing the call to iavf_set_vlan_offload_features() (second step). Calling netdev_update_features() from watchdog task is enough for both init and reset paths. Fixes: 7598f4b40bd6 ("iavf: Move netdev_update_features() into watchdog task") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: Fix ice VF reset during iavf initializationDawid Wesierski4-4/+25
Fix the current implementation that causes ice_trigger_vf_reset() to start resetting the VF even when the VF-NIC is still initializing. When we reset NIC with ice driver it can interfere with iavf-vf initialization e.g. during consecutive resets induced by ice iavf ice | | |<-----------------| | ice resets vf iavf | reset | start | |<-----------------| | ice resets vf | causing iavf | initialization | error | | iavf reset end This leads to a series of -53 errors (failed to init adminq) from the IAVF. Change the state of the vf_state field to be not active when the IAVF is still initializing. Make sure to wait until receiving the message on the message box to ensure that the vf is ready and initializded. In simple terms we use the ACTIVE flag to make sure that the ice driver knows if the iavf is ready for another reset iavf ice | | | | |<------------- ice resets vf iavf vf_state != ACTIVE reset | start | | | | | iavf | reset-------> vf_state == ACTIVE end ice resets vf | | | | Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration") Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: Fix stats after PF resetAhmed Zaki1-0/+5
After a core PF reset, the VFs were showing wrong Rx/Tx stats. This is a regression in commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") caused by missing to set "stat_offsets_loaded = false" in the ice_vsi_rebuild() path. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16net: bcmgenet: Restore phy_stop() depending upon suspend/closeFlorian Fainelli1-3/+5
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing warnings from the PHY library that phy_start() is called from the RUNNING state since we are no longer stopping the PHY state machine during bcmgenet_suspend(). Restore the call to phy_stop() but make it conditional on being called from the close or suspend path. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-15ARM: dts: stm32: add CAN support on stm32f746Dario Binacchi1-0/+47
Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral configuration and CAN3 in single peripheral configuration: - Dual CAN peripheral configuration: * CAN1: Primary bxCAN for managing the communication between a secondary bxCAN and the 512-byte SRAM memory. * CAN2: Secondary bxCAN with no direct access to the SRAM memory. This means that the two bxCAN cells share the 512-byte SRAM memory and CAN2 can't be used without enabling CAN1. - Single CAN peripheral configuration: * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and 512-byte SRAM memory. ------------------------------------------------------------------------- | features | CAN1 | CAN2 | CAN 3 | ------------------------------------------------------------------------- | SRAM | 512-byte shared between CAN1 & CAN2 | 512-byte | ------------------------------------------------------------------------- | Filters | 26 filters shared between CAN1 & CAN2 | 14 filters | ------------------------------------------------------------------------- Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: bxcan: add support for single peripheral configurationDario Binacchi1-11/+23
Add support for bxCAN controller in single peripheral configuration: - primary bxCAN - dedicated Memory Access Controller unit - 512-byte SRAM memory - 14 filter banks Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-5-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15ARM: dts: stm32: add pin map for CAN controller on stm32f7Dario Binacchi1-0/+82
Add pin configurations for using CAN controller on stm32f7. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15ARM: dts: stm32f429: put can2 in secondary modeDario Binacchi1-0/+1
This is a preparation patch for the upcoming support to manage CAN peripherals in single configuration. The addition ensures backwards compatibility. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-3-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15dt-bindings: net: can: add "st,can-secondary" propertyDario Binacchi1-4/+15
On the stm32f7 Socs the can peripheral can be in single or dual configuration. In the dual configuration, in turn, it can be in primary or secondary mode. The addition of the 'st,can-secondary' property allows you to specify this mode in the dual configuration. CAN peripheral nodes in single configuration contain neither "st,can-primary" nor "st,can-secondary". Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/20230427204540.3126234-2-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: CAN_BXCAN should depend on ARCH_STM32Geert Uytterhoeven1-1/+1
The STMicroelectronics STM32 basic extended CAN Controller (bxCAN) is only present on STM32 SoCs. Hence drop the "|| OF" part from its dependency rule, to prevent asking the user about this driver when configuring a kernel without STM32 SoC support. Fixes: f00647d8127be4d3 ("can: bxcan: add support for ST bxCAN controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/40095112efd1b2214e4223109fd9f0c6d0158a2d.1680609318.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: dev: fix missing CAN XL support in can_put_echo_skb()Oliver Hartkopp1-1/+2
can_put_echo_skb() checks for the enabled IFF_ECHO flag and the correct ETH_P type of the given skbuff. When implementing the CAN XL support the new check for ETH_P_CANXL has been forgotten. Fixes: fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flagOliver Hartkopp1-1/+1
The control message provided by J1939 support MSG_CMSG_COMPAT but blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user space on 64 bit kernels. Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/20230505110308.81087-3-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flagOliver Hartkopp1-1/+1
The control message provided by isotp support MSG_CMSG_COMPAT but blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user space on 64 bit kernels. Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when reading from socket") Link: https://lore.kernel.org/20230505110308.81087-2-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15net: phylink: fix ksettings_set() ethtool callRussell King (Oracle)1-4/+4
While testing a Fiberstore SFP-10G-T module (which uses 10GBASE-R with rate adaption) in a Clearfog platform (which can't do that) it was found that the PHYs advertisement was not limited according to the hosts capabilities when using ethtool to change it. Fix this by ensuring that we mask the advertisement with the computed support mask as the very first thing we do. Fixes: cbc1bb1e4689 ("net: phylink: simplify phy case for ksettings_set method") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15tipc: check the bearer min mtu properly when setting it by netlinkXin Long1-2/+2
Checking the bearer min mtu with tipc_udp_mtu_bad() only works for IPv4 UDP bearer, and IPv6 UDP bearer has a different value for the min mtu. This patch checks with encap_hlen + TIPC_MIN_BEARER_MTU for min mtu, which works for both IPv4 and IPv6 UDP bearer. Note that tipc_udp_mtu_bad() is still used to check media min mtu in __tipc_nl_media_set(), as m->mtu currently is only used by the IPv4 UDP bearer as its default mtu value. Fixes: 682cd3cf946b ("tipc: confgiure and apply UDP bearer MTU on running links") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15tipc: do not update mtu if msg_max is too small in mtu negotiationXin Long1-3/+6
When doing link mtu negotiation, a malicious peer may send Activate msg with a very small mtu, e.g. 4 in Shuang's testing, without checking for the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then n->links[bearer_id].mtu is set to 4294967228, which is a overflow of '4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss(). With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning: tipc: Too large msg, purging xmit list 1 5 0 40 4! tipc: Too large msg, purging xmit list 1 15 0 60 4! And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in named_distribute(), and when purging it in tipc_link_xmit(), a crash was even caused: general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19 RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0 Call Trace: <IRQ> skb_release_data+0xf9/0x1d0 kfree_skb_reason+0x40/0x100 tipc_link_xmit+0x57a/0x740 [tipc] tipc_node_xmit+0x16c/0x5c0 [tipc] tipc_named_node_up+0x27f/0x2c0 [tipc] tipc_node_write_unlock+0x149/0x170 [tipc] tipc_rcv+0x608/0x740 [tipc] tipc_udp_recv+0xdc/0x1f0 [tipc] udp_queue_rcv_one_skb+0x33e/0x620 udp_unicast_rcv_skb.isra.72+0x75/0x90 __udp4_lib_rcv+0x56d/0xc20 ip_protocol_deliver_rcu+0x100/0x2d0 This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(), and not updating mtu if it is too small. Fixes: ed193ece2649 ("tipc: simplify link mtu negotiation") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15tipc: add tipc_bearer_min_mtu to calculate min mtuXin Long3-2/+19
As different media may requires different min mtu, and even the same media with different net family requires different min mtu, add tipc_bearer_min_mtu() to calculate min mtu accordingly. This API will be used to check the new mtu when doing the link mtu negotiation in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15net: mdio: i2c: fix rollball accessorsRussell King (Oracle)1-7/+8
Commit 87e3bee0f247 ("net: mdio: i2c: Separate C22 and C45 transactions") separated the non-rollball bus accessors, but left the rollball accessors as is. As rollball accessors are clause 45, this results in the rollball protocol being completely non-functional. Fix this. Fixes: 87e3bee0f247 ("net: mdio: i2c: Separate C22 and C45 transactions") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15virtio_net: Fix error unwinding of XDP initializationFeng Liu1-17/+44
When initializing XDP in virtnet_open(), some rq xdp initialization may hit an error causing net device open failed. However, previous rqs have already initialized XDP and enabled NAPI, which is not the expected behavior. Need to roll back the previous rq initialization to avoid leaks in error unwinding of init code. Also extract helper functions of disable and enable queue pairs. Use newly introduced disable helper function in error unwinding and virtnet_close. Use enable helper function in virtnet_open. Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info") Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15net: fec: remove the xdp_return_frame when lack of tx BDsShenwei Wang1-1/+0
In the implementation, the sent_frame count does not increment when transmit errors occur. Therefore, bq_xmit_all() will take care of returning the XDP frames. Fixes: 26312c685ae0 ("net: fec: correct the counting of XDP sent frames") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()Dong Chenchen1-5/+3
As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed854584 ("nsh: add GSO support") Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix reset timeout when enable full VFJijie Shao2-5/+28
The timeout of the cmdq reset command has been increased to resolve the reset timeout issue in the full VF scenario. The timeout of other cmdq commands remains unchanged. Fixes: 8d307f8e8cf1 ("net: hns3: create new set of unified hclge_comm_cmd_send APIs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix reset delay time to avoid configuration timeoutJie Wang1-1/+4
Currently the hns3 vf function reset delays 5000ms before vf rebuild process. In product applications, this delay is too long for application configurations and causes configuration timeout. According to the tests, 500ms delay is enough for reset process except PF FLR. So this patch modifies delay to 500ms in these scenarios. Fixes: 6988eb2a9b77 ("net: hns3: Add support to reset the enet/ring mgmt layer") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix sending pfc frames after reset issueJijie Shao3-8/+16
To prevent the system from abnormally sending PFC frames after an abnormal reset. The hns3 driver notifies the firmware to disable pfc before reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix output information incomplete for dumping tx queue info with debugfsJie Wang2-1/+2
In function hns3_dump_tx_queue_info, The print buffer is not enough when the tx BD number is configured to 32760. As a result several BD information wouldn't be displayed. So fix it by increasing the tx queue print buffer length. Fixes: 630a6738da82 ("net: hns3: adjust string spaces of some parameters of tx bd info in debugfs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: disable learning for standalone portsClément Léger1-8/+16
When ports are in standalone mode, they should have learning disabled to avoid adding new entries in the MAC lookup table which might be used by other bridge ports to forward packets. While adding that, also make sure learning is enabled for CPU port. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: fix STP states handlingAlexis Lothoré2-9/+49
stp_set_state() should actually allow receiving BPDU while in LEARNING mode which is not the case. Additionally, the BLOCKEN bit does not actually forbid sending forwarded frames from that port. To fix this, add a5psw_port_tx_enable() function which allows to disable TX. However, while its name suggest that TX is totally disabled, it is not and can still allow to send BPDUs even if disabled. This can be done by using forced forwarding with the switch tagging mechanism but keeping "filtering" disabled (which is already the case in the rzn1-a5sw tag driver). With these fixes, STP support is now functional. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: enable management frames for CPU portClément Léger2-2/+2
Currently, management frame were discarded before reaching the CPU port due to a misconfiguration of the MGMT_CONFIG register. Enable them by setting the correct value in this register in order to correctly receive management frame and handle STP. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13erspan: get the proto with the md version for collect_mdXin Long1-5/+8
In commit 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver"), it gets the proto with t->parms.erspan_ver, but t->parms.erspan_ver is not used by collect_md branch, and instead it should get the proto with md->version for collect_md. Thanks to Kevin for pointing this out. Fixes: 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver") Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Reported-by: Kevin Traynor <ktraynor@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12tcp: fix possible sk_priority leak in tcp_v4_send_reset()Eric Dumazet1-2/+3
When tcp_v4_send_reset() is called with @sk == NULL, we do not change ctl_sk->sk_priority, which could have been set from a prior invocation. Change tcp_v4_send_reset() to set sk_priority and sk_mark fields before calling ip_send_unicast_reply(). This means tcp_v4_send_reset() and tcp_v4_send_ack() no longer have to clear ctl_sk->sk_mark after their call to ip_send_unicast_reply(). Fixes: f6c0f5d209fa ("tcp: honor SO_PRIORITY in TIME_WAIT state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12vsock: avoid to close connected socket after the timeoutZhuang Shengen1-1/+1
When client and server establish a connection through vsock, the client send a request to the server to initiate the connection, then start a timer to wait for the server's response. When the server's RESPONSE message arrives, the timer also times out and exits. The server's RESPONSE message is processed first, and the connection is established. However, the client's timer also times out, the original processing logic of the client is to directly set the state of this vsock to CLOSE and return ETIMEDOUT. It will not notify the server when the port is released, causing the server port remain. when client's vsock_connect timeout，it should check sk state is ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection is established, the client should not set the sk state to CLOSE Note: I encountered this issue on kernel-4.18, which can be fixed by this patch. Then I checked the latest code in the community and found similar issue. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Zhuang Shengen <zhuangshengen@huawei.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12sfc: disable RXFCS and RXALL features by defaultPieter Jansen van Vuuren1-1/+3
By default we would not want RXFCS and RXALL features enabled as they are mainly intended for debugging purposes. This does not stop users from enabling them later on as needed. Fixes: 8e57daf70671 ("sfc_ef100: RX path for EF100") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12ice: Fix undersized tx_flags variableJan Sokolowski3-14/+8
As not all ICE_TX_FLAGS_* fit in current 16-bit limited tx_flags field that was introduced in the Fixes commit, VLAN-related information would be discarded completely. As such, creating a vlan and trying to run ping through would result in no traffic passing. Fix that by refactoring tx_flags variable into flags only and a separate variable that holds VLAN ID. As there is some space left, type variable can fit between those two. Pahole reports no size change to ice_tx_buf struct. Fixes: aa1d3faf71a6 ("ice: Robustify cleaning/completing XDP Tx buffers") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12MAINTAINERS: exclude wireless drivers from netdevJakub Kicinski1-0/+1
It seems that we mostly get netdev CCed on wireless patches which are written by people who don't know any better and CC everything that get_maintainers spits out. Rather than patches which indeed could benefit from general networking review. Marking them down in patchwork as Awaiting Upstream is a bit tedious. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12nfp: fix NFP_NET_MAX_DSCP definition errorHuayu Chen1-1/+1
The patch corrects the NFP_NET_MAX_DSCP definition in the main.h file. The incorrect definition result DSCP bits not being mapped properly when DCB is set. When NFP_NET_MAX_DSCP was defined as 4, the next 60 DSCP bits failed to be set. Fixes: 9b7fe8046d74 ("nfp: add DCB IEEE support") Cc: stable@vger.kernel.org Signed-off-by: Huayu Chen <huayu.chen@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12MAINTAINERS: don't CC docs@ for netlink spec changesJakub Kicinski1-0/+2
Documentation/netlink/ contains machine-readable protocol specs in YAML. Those are much like device tree bindings, no point CCing docs@ for the changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com>
2023-05-12MAINTAINERS: sctp: move Neil to CREDITSMarcelo Ricardo Leitner2-2/+5
Neil moved away from SCTP related duties. Move him to CREDITS then and while at it, update SCTP project website. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12net: phy: dp83867: add w/a for packet errors seen with short cablesGrygorii Strashko1-1/+21
Introduce the W/A for packet errors seen with short cables (<1m) between two DP83867 PHYs. The W/A recommended by DM requires FFE Equalizer Configuration tuning by writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard and soft resets as follows: write_reg(0x001F, 0x8000); //hard reset write_reg(DSP_FFE_CFG, 0x0E81); write_reg(0x001F, 0x4000); //soft reset Since DP83867 PHY DM says "Changing this register to 0x0E81, will not affect Long Cable performance.", enable the W/A by default. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.