| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I noticed that a handful of NFSv3 fstests were taking an
unexpectedly long time to run. Troubleshooting showed that the
server's TCP window closed and never re-opened, which caused the
client to trigger an RPC retransmit timeout after 180 seconds.
The client's recovery action was to establish a fresh connection
and retransmit the timed-out requests. This worked, but it adds a
long delay.
I tracked the problem to the commit that attempted to reduce the
rate at which the network layer delivers TCP socket data_ready
callbacks. Under most circumstances this change worked as expected,
but for NFSv3, which has no session or other type of throttling, it
can overwhelm the receiver on occasion.
I'm sure I could tweak the lowat settings, but the small benefit
doesn't seem worth the bother. Just revert it.
Fixes: 2b877fc53e97 ("SUNRPC: Reduce thread wake-up rate when receiving large RPC messages")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Allow clients to request getting a delegation xor an open stateid if a
delegation isn't available. This allows the client to avoid sending a
final CLOSE for the (useless) open stateid, when it is granted a
delegation.
If this flag is requested by the client and there isn't already a new
open stateid, discard the new open stateid before replying.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Allow SETATTR to handle delegated timestamps. This patch assumes that
only the delegation holder has the ability to set the timestamps in this
way, so we allow this only if the SETATTR stateid refers to a
*_ATTRS_DELEG delegation.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add support for the delegated timestamps on write delegations. This
allows the server to proxy timestamps from the delegation holder to
other clients that are doing GETATTRs vs. the same inode.
When OPEN4_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS bit is set in the OPEN
call, set the dl_type to the *_ATTRS_DELEG flavor of delegation.
Add timespec64 fields to nfs4_cb_fattr and decode the timestamps into
those. Vet those timestamps according to the delstid spec and update
the inode attrs if necessary.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The delstid draft adds new NFS4_SHARE_WANT_TYPE_MASK values that don't
fit neatly into the existing WANT_MASK or WHEN_MASK. Add a new
NFS4_SHARE_WANT_MOD_MASK value and redefine NFS4_SHARE_WANT_MASK to
include it.
Also fix the checks in nfsd4_deleg_xgrade_none_ext() to check for the
flags instead of equality, since there may be modifier flags in the
value.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add support for FATTR4_OPEN_ARGUMENTS. This a new mechanism for the
client to discover what OPEN features the server supports.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add some preparatory code to various functions that handle delegation
types to allow them to handle the OPEN_DELEGATE_*_ATTRS_DELEG constants.
Add helpers for detecting whether it's a read or write deleg, and
whether the attributes are delegated.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add the OPEN4_SHARE_ACCESS_WANT constants from the nfs4.1 and delstid
draft into the nfs4_1.x file, and regenerate the headers and source
files. Do a mass renaming of NFS4_SHARE_WANT_* to
OPEN4_SHARE_ACCESS_WANT_* in the nfsd directory.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rename the enum with the same name in include/linux/nfs4.h, add the
proper enum to nfs4_1.x and regenerate the headers and source files. Do
a mass rename of all NFS4_OPEN_DELEGATE_* to OPEN_DELEGATE_* in the nfsd
directory.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In the long run, the NFS development community intends to autogenerate a
lot of the XDR handling code. Both the NFS client and server include
"include/linux/nfs4.hi". That file was hand-rolled, and some of the symbols
in it conflict with the autogenerated symbols.
Add a small nfs4_1.x to Documentation that currently just has the
necessary definitions for the delstid draft, and generate the relevant
header and source files. Make include/linux/nfs4.h include the generated
include/linux/sunrpc/xdrgen/nfs4_1.h and remove the conflicting
definitions from it and nfs_xdr.h.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC8881, section 10.4.3 has some specific guidance as to how the
delegated change attribute should be handled. We currently don't follow
that guidance properly.
In particular, when the file is modified, the server always reports the
initial change attribute + 1. Section 10.4.3 however indicates that it
should be incremented on every GETATTR request from other clients.
Only request the change attribute until the file has been modified. If
there is an outstanding delegation, then increment the cached change
attribute on every GETATTR.
Fixes: 6487a13b5c6b ("NFSD: add support for CB_GETATTR callback")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A subtlety of this API is that if the @nbytes region traverses a
page boundary, the next __xdr_commit_encode will shift the data item
in the XDR encode buffer. This makes the returned pointer point to
something else, leading to unexpected behavior.
There are a few cases where the caller saves the returned pointer
and then later uses it to insert a computed value into an earlier
part of the stream. This can be safe only if either:
- the data item is guaranteed to be in the XDR buffer's head, and
thus is not ever going to be near a page boundary, or
- the data item is no larger than 4 octets, since XDR alignment
rules require all data items to start on 4-octet boundaries
But that safety is only an artifact of the current implementation.
It would be less brittle if these "safe" uses were eventually
replaced.
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit ab04de60ae1c ("NFSD: Optimize nfsd4_encode_fattr()") replaced
the use of write_bytes_to_xdr_buf() because it's expensive and the
data items to be encoded are already properly aligned.
However, there's no guarantee that the pointer returned from
xdr_reserve_space() will still point to the correct reserved space
in the encode buffer after one or more intervening calls to
xdr_reserve_space(). It just happens to work with the current
implementation of xdr_reserve_space().
This commit effectively reverts the optimization.
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There's no guarantee that the pointer returned from
xdr_reserve_space() will still point to the correct reserved space
in the encode buffer after one or more intervening calls to
xdr_reserve_space(). It just happens to work with the current
implementation of xdr_reserve_space().
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Extract the code that encodes the secinfo4 union data type to
clarify the logic. The removed warning is pretty well obscured and
thus probably not terribly useful.
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There's no guarantee that the pointer returned from
xdr_reserve_space() will still point to the correct reserved space
in the encode buffer after one or more intervening calls to
xdr_reserve_space(). It just happens to work with the current
implementation of xdr_reserve_space().
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit eeadcb757945 ("NFSD: Simplify READ_PLUS") replaced the use of
write_bytes_to_xdr_buf(), copying what was in nfsd4_encode_read()
at the time.
However, the current code will corrupt the encoded data if the XDR
data items that are reserved early and then poked into the XDR
buffer later happen to fall on a page boundary in the XDR encoding
buffer.
__xdr_commit_encode can shift encoded data items in the encoding
buffer so that pointers returned from xdr_reserve_space() no longer
address the same part of the encoding stream.
Fixes: eeadcb757945 ("NFSD: Simplify READ_PLUS")
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit eeadcb757945 ("NFSD: Simplify READ_PLUS") replaced the use of
write_bytes_to_xdr_buf(), copying what was in nfsd4_encode_read()
at the time.
However, the current code will corrupt the encoded data if the XDR
data items that are reserved early and then poked into the XDR
buffer later happen to fall on a page boundary in the XDR encoding
buffer.
__xdr_commit_encode can shift encoded data items in the encoding
buffer so that pointers returned from xdr_reserve_space() no longer
address the same part of the encoding stream.
Fixes: eeadcb757945 ("NFSD: Simplify READ_PLUS")
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 28d5bc468efe ("NFSD: Optimize nfsd4_encode_readv()") replaced
the use of write_bytes_to_xdr_buf() because it's expensive and the
data items to be encoded are already properly aligned.
However, the current code will corrupt the encoded data if the XDR
data items that are reserved early and then poked into the XDR
buffer later happen to fall on a page boundary in the XDR encoding
buffer.
__xdr_commit_encode can shift encoded data items in the encoding
buffer so that pointers returned from xdr_reserve_space() no longer
address the same part of the encoding stream.
This isn't an issue for splice reads because the reserved encode
buffer areas must fall in the XDR buffers header for the splice to
work without error. For vectored reads, however, there is a
possibility of send buffer corruption in rare cases.
Fixes: 28d5bc468efe ("NFSD: Optimize nfsd4_encode_readv()")
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
J. David reports an odd corruption of a READDIR reply sent to a
FreeBSD client.
xdr_reserve_space() has to do a special trick when the @nbytes value
requests more space than there is in the current page of the XDR
buffer.
In that case, xdr_reserve_space() returns a pointer to the start of
the next page, and then the next call to xdr_reserve_space() invokes
__xdr_commit_encode() to copy enough of the data item back into the
previous page to make that data item contiguous across the page
boundary.
But we need to be careful in the case where buffer space is reserved
early for a data item whose value will be inserted into the buffer
later.
One such caller, nfsd4_encode_operation(), reserves 8 bytes in the
encoding buffer for each COMPOUND operation. However, a READDIR
result can sometimes encode file names so that there are only 4
bytes left at the end of the current XDR buffer page (though plenty
of pages are left to handle the remaining encoding tasks).
If a COMPOUND operation follows the READDIR result (say, a GETATTR),
then nfsd4_encode_operation() will reserve 8 bytes for the op number
(9) and the op status (usually NFS4_OK). In this weird case,
xdr_reserve_space() returns a pointer to byte zero of the next buffer
page, as it assumes the data item will be copied back into place (in
the previous page) on the next call to xdr_reserve_space().
nfsd4_encode_operation() writes the op num into the buffer, then
saves the next 4-byte location for the op's status code. The next
xdr_reserve_space() call is part of GETATTR encoding, so the op num
gets copied back into the previous page, but the saved location for
the op status continues to point to the wrong spot in the current
XDR buffer page because __xdr_commit_encode() moved that data item.
After GETATTR encoding is complete, nfsd4_encode_operation() writes
the op status over the first XDR data item in the GETATTR result.
The NFS4_OK status code (0) makes it look like there are zero items
in the GETATTR's attribute bitmask.
The patch description of commit 2825a7f90753 ("nfsd4: allow encoding
across page boundaries") [2014] remarks that NFSD "can't handle a
new operation starting close to the end of a page." This bug appears
to be one reason for that remark.
Reported-by: J David <j.david.lists@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/3998d739-c042-46b4-8166-dbd6c5f0e804@oracle.com/T/#t
Tested-by: Rick Macklem <rmacklem@uoguelph.ca>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We can access exp->ex_stats or exp->ex_uuid in rcu context(c_show and
e_show). All these resources should be released using kfree_rcu. Fix this
by using call_rcu, clean them all after a rcu grace period.
==================================================================
BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd]
Read of size 1 at addr ff11000010fdc120 by task cat/870
CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_address_description.constprop.0+0x2c/0x3a0
print_report+0xb9/0x280
kasan_report+0xae/0xe0
svc_export_show+0x362/0x430 [nfsd]
c_show+0x161/0x390 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 830:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_node_track_caller_noprof+0x1bc/0x400
kmemdup_noprof+0x22/0x50
svc_export_parse+0x8a9/0xb80 [nfsd]
cache_do_downcall+0x71/0xa0 [sunrpc]
cache_write_procfs+0x8e/0xd0 [sunrpc]
proc_reg_write+0xe1/0x140
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 868:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kfree+0xf3/0x3e0
svc_export_put+0x87/0xb0 [nfsd]
cache_purge+0x17f/0x1f0 [sunrpc]
nfsd_destroy_serv+0x226/0x2d0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: ae74136b4bb6 ("SUNRPC: Allow cache lookups to use RCU protection rather than the r/w spinlock")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
rcu_read_lock/rcu_read_unlock has already provide protection for the
pointer we will reference when we call c_show. Therefore, there is no
need to obtain a cache reference to help protect cache_head.
Additionally, the .put such as expkey_put/svc_export_put will invoke
dput, which can sleep and break rcu. Stop get cache reference to fix
them all.
Fixes: ae74136b4bb6 ("SUNRPC: Allow cache lookups to use RCU protection rather than the r/w spinlock")
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
rcu_read_lock/rcu_read_unlock has already provide protection for the
pointer we will reference when we call e_show. Therefore, there is no
need to obtain a cache reference to help protect cache_head.
Additionally, the .put such as expkey_put/svc_export_put will invoke
dput, which can sleep and break rcu. Stop get cache reference to fix
them all.
Fixes: ae74136b4bb6 ("SUNRPC: Allow cache lookups to use RCU protection rather than the r/w spinlock")
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This is a prepare patch to add cache_check_rcu, will use it with follow
patch.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It helps to know what kind of callback happened that triggered the
WARN_ONCE in nfsd4_cb_done() function in diagnosing what can set
an uncommon state where both cb_status and tk_status are set at
the same time.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If a client were to send an error to a CB_GETATTR call, the code
erronously continues to try decode past the error code. It ends
up returning BAD_XDR error to the rpc layer and then in turn
trigger a WARN_ONCE in nfsd4_cb_done() function.
Fixes: 6487a13b5c6b ("NFSD: add support for CB_GETATTR callback")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a shrinker which frees unused slots and may ask the clients to use
fewer slots on each session.
We keep a global count of the number of freeable slots, which is the sum
of one less than the current "target" slots in all sessions in all
clients in all net-namespaces. This number is reported by the shrinker.
When the shrinker is asked to free some, we call xxx on each session in
a round-robin asking each to reduce the slot count by 1. This will
reduce the "target" so the number reported by the shrinker will reduce
immediately. The memory will only be freed later when the client
confirmed that it is no longer needed.
We use a global list of sessions and move the "head" to after the last
session that we asked to reduce, so the next callback from the shrinker
will move on to the next session. This pressure should be applied
"evenly" across all sessions over time.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reducing the number of slots in the session slot table requires
confirmation from the client. This patch adds reduce_session_slots()
which starts the process of getting confirmation, but never calls it.
That will come in a later patch.
Before we can free a slot we need to confirm that the client won't try
to use it again. This involves returning a lower cr_maxrequests in a
SEQUENCE reply and then seeing a ca_maxrequests on the same slot which
is not larger than we limit we are trying to impose. So for each slot
we need to remember that we have sent a reduced cr_maxrequests.
To achieve this we introduce a concept of request "generations". Each
time we decide to reduce cr_maxrequests we increment the generation
number, and record this when we return the lower cr_maxrequests to the
client. When a slot with the current generation reports a low
ca_maxrequests, we commit to that level and free extra slots.
We use an 16 bit generation number (64 seems wasteful) and if it cycles
we iterate all slots and reset the generation number to avoid false matches.
When we free a slot we store the seqid in the slot pointer so that it can
be restored when we reactivate the slot. The RFC can be read as
suggesting that the slot number could restart from one after a slot is
retired and reactivated, but also suggests that retiring slots is not
required. So when we reactive a slot we accept with the next seqid in
sequence, or 1.
When decoding sa_highest_slotid into maxslots we need to add 1 - this
matches how it is encoded for the reply.
se_dead is moved in struct nfsd4_session to remove a hole.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If a client ever uses the highest available slot for a given session,
attempt to allocate more slots so there is room for the client to use
them if wanted. GFP_NOWAIT is used so if there is not plenty of
free memory, failure is expected - which is what we want. It also
allows the allocation while holding a spinlock.
Each time we increase the number of slots by 20% (rounded up). This
allows fairly quick growth while avoiding excessive over-shoot.
We would expect to stablise with around 10% more slots available than
the client actually uses.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Each client now reports the number of slots allocated in each session.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rather than guessing how much space it might be safe to use for the DRC,
simply try allocating slots and be prepared to accept failure.
The first slot for each session is allocated with GFP_KERNEL which is
unlikely to fail. Subsequent slots are allocated with the addition of
__GFP_NORETRY which is expected to fail if there isn't much free memory.
This is probably too aggressive but clears the way for adding a
shrinker interface to free extra slots when memory is tight.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Using an xarray to store session slots will make it easier to change the
number of active slots based on demand, and removes an unnecessary
limit.
To achieve good throughput with a high-latency server it can be helpful
to have hundreds of concurrent writes, which means hundreds of slots.
So increase the limit to 2048 (twice what the Linux client will
currently use). This limit is only a sanity check, not a hard limit.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the connection limit only apply to unconfirmed connections,
there is no need to configure it. So remove all the configuration and
fix the number of unconfirmed connections as always 64 - which is
now given a name: XPT_MAX_TMP_CONN
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The heuristic for limiting the number of incoming connections to nfsd
currently uses sv_nrthreads - allowing more connections if more threads
were configured.
A future patch will allow number of threads to grow dynamically so that
there will be no need to configure sv_nrthreads. So we need a different
solution for limiting connections.
It isn't clear what problem is solved by limiting connections (as
mentioned in a code comment) but the most likely problem is a connection
storm - many connections that are not doing productive work. These will
be closed after about 6 minutes already but it might help to slow down a
storm.
This patch adds a per-connection flag XPT_PEER_VALID which indicates
that the peer has presented a filehandle for which it has some sort of
access. i.e the peer is known to be trusted in some way. We now only
count connections which have NOT been determined to be valid. There
should be relative few of these at any given time.
If the number of non-validated peer exceed a limit - currently 64 - we
close the oldest non-validated peer to avoid having too many of these
useless connections.
Note that this patch significantly changes the meaning of the various
configuration parameters for "max connections". The next patch will
remove all of these.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir().
Fixes: 74fd48739d04 ("nfsd: new Kconfig option for legacy client tracking")
Reported-by: Jur van der Burg <jur@avtware.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219580
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
@sb should have been removed by commit 7e64c5bc497c ("NLM/NFSD: Fix
lock notifications for async-capable filesystems").
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_thread_init_status() contains an open-coded
store_release_wake_up(). It is cleaner to use that function directly
rather than needing to remember the barrier.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The wake_up_var interface is fragile as barriers are sometimes needed.
There are now new interfaces so that most wake-ups can use an interface
that is guaranteed to have all barriers needed.
This patch changes the wake up on cl_cb_inflight to use
atomic_dec_and_wake_up().
It also changes the wake up on rp_locked to use store_release_wake_up().
This involves changing rp_locked from atomic_t to int.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since commit e56dc9e2949e ("nfsd: remove fault injection code") remove
all nfsd_recall_delegations codes,
we don't need trace_nfsd_deleg_recall any more.
Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
|
|
The Arch Linux glibc package contains a versioned dependency on
"linux-api-headers". If the linux-api-headers package provided by
pacman-pkg does not specify an explicit version this dependency is not
satisfied.
Fix the dependency by providing an explicit version.
Fixes: c8578539deba ("kbuild: add script and target to generate pacman package")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
For non-pollable files, buffer ring consumption will commit upfront.
This is fine, but io_ring_buffer_select() will return the address of the
buffer after having committed it. For incrementally consumed buffers,
this is incorrect as it will modify the buffer address.
Store the pre-committed value and return that. If that isn't done, then
the initial part of the buffer is not used and the application will
correctly assume the content arrived at the start of the userspace
buffer, but the kernel will have put it later in the buffer. Or it can
cause a spurious -EFAULT returned in the CQE, depending on the buffer
size. As bounds are suitably checked for doing the actual IO, no adverse
side effects are possible - it's just a data misplacement within the
existing buffer.
Reported-by: Gwendal Fernet <gwendalfernet@gmail.com>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d75 ("io_uring/kbuf: add support for incremental buffer consumption")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Driver queries vport_cxt.num_plane and enables multiplane when it is
greater then 0, but some old FWs (versions from x.40.1000 till x.42.1000),
report vport_cxt.num_plane = 1 unexpectedly.
Fix it by querying num_plane only when HCA_CAP2.multiplane bit is set.
Fixes: 2a5db20fa532 ("RDMA/mlx5: Add support to multi-plane device and port")
Link: https://patch.msgid.link/r/1ef901acdf564716fcf550453cf5e94f343777ec.1734610916.git.leon@kernel.org
Cc: stable@vger.kernel.org
Reported-by: Francesco Poli <invernomuto@paranoici.org>
Closes: https://lore.kernel.org/all/nvs4i2v7o6vn6zhmtq4sgazy2hu5kiulukxcntdelggmznnl7h@so3oul6uwgbl/
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When ICSSG interfaces are brought down and brought up again, the
pru cores are shut down and booted again, flushing out all the memories
and start again in a clean state. Hence it is expected that the
IEP_CMP_CFG register needs to be flushed during iep_init() to ensure
that the existing residual configuration doesn't cause any unusual
behavior. If the register is not cleared, existing IEP_CMP_CFG set for
CMP1 will result in SYNC0_OUT signal based on the SYNC_OUT register values.
After bringing the interface up, calling PPS enable doesn't work as
the driver believes PPS is already enabled, (iep->pps_enabled is not
cleared during interface bring down) and driver will just return true
even though there is no signal. Fix this by disabling pps and perout.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
and SLICE1. Currently whenever any ICSSG interface comes up we load the
respective firmwares to PRU cores and whenever interface goes down, we
stop the resective cores. Due to this, when SLICE0 goes down while
SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
stopped. This results in clock jump for SLICE1 interface as the timesync
related operations are no longer running.
As there are interdependencies between SLICE0 and SLICE1 firmwares,
fix this by running both PRU0 and PRU1 firmwares as long as at least 1
ICSSG interface is up. Add new flag in prueth struct to check if all
firmwares are running and remove the old flag (fw_running).
Use emacs_initialized as reference count to load the firmwares for the
first and last interface up/down. Moving init_emac_mode and fw_offload_mode
API outside of icssg_config to icssg_common_start API as they need
to be called only once per firmware boot.
Change prueth_emac_restart() to return error code and add error prints
inside the caller of this functions in case of any failures.
Move prueth_emac_stop() from common to sr1 driver.
sr1 and sr2 drivers have different logic handling for stopping
the firmwares. While sr1 driver is dependent on emac structure
to stop the corresponding pru cores for that slice, for sr2
all the pru cores of both the slices are stopped and is not
dependent on emac. So the prueth_emac_stop() function is no
longer common and can be moved to sr1 driver.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the skb size after coalescing is only limited by the skb
layout (the skb must not carry frag_list). A single coalesced skb
covering several MSS can potentially fill completely the receive
buffer. In such a case, the snd win will zero until the receive buffer
will be empty again, affecting tput badly.
Fixes: 8268ed4c9d19 ("mptcp: introduce and use mptcp_try_coalesce()")
Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Under some corner cases the MPTCP protocol can end-up invoking
mptcp_cleanup_rbuf() when no data has been copied, but such helper
assumes the opposite condition.
Explicitly drop such assumption and performs the costly call only
when strictly needed - before releasing the msk socket lock.
Fixes: fd8976790a6c ("mptcp: be careful on MPTCP-level ack.")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-2-8608af434ceb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the recvmsg() blocks after receiving some data - i.e. due to
SO_RCVLOWAT - the MPTCP code will attempt multiple times to
adjust the receive buffer size, wrongly accounting every time the
cumulative of received data - instead of accounting only for the
delta.
Address the issue moving mptcp_rcv_space_adjust just after the
data reception and passing it only the just received bytes.
This also removes an unneeded difference between the TCP and MPTCP
RX code path implementation.
Fixes: 581302298524 ("mptcp: error out earlier on disconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-1-8608af434ceb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:489
kasan_report+0xd9/0x110 mm/kasan/report.c:602
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:127 [inline]
ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
ila_nf_input+0x1ee/0x620 net/ipv6/ila/ila_xlat.c:185
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:626
nf_hook.constprop.0+0x42e/0x750 include/linux/netfilter.h:269
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0xa4/0x680 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core+0x12e/0x1e0 net/core/dev.c:5672
__netif_receive_skb+0x1d/0x160 net/core/dev.c:5785
process_backlog+0x443/0x15f0 net/core/dev.c:6117
__napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6883
napi_poll net/core/dev.c:6952 [inline]
net_rx_action+0xa94/0x1010 net/core/dev.c:7074
handle_softirqs+0x213/0x8f0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0x109/0x170 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049
Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot+47e761d22ecf745f72b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6772c9ae.050a0220.2f3838.04c7.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Tom Herbert <tom@herbertland.com>
Link: https://patch.msgid.link/20241230162849.2795486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found
by syzbot.
Rework vlan_get_protocol_dgram() to not touch skb at all,
so that it can be used from many cpus on the same skb.
Add a const qualifier to skb argument.
[1]
skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5892 Comm: syz-executor883 Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0b 8d 48 c7 c6 86 d5 25 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 5a 69 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900038d7638 EFLAGS: 00010282
RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 609ffd18ea660600
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffff88802483c8d0 R08: ffffffff817f0a8c R09: 1ffff9200071ae60
R10: dffffc0000000000 R11: fffff5200071ae61 R12: 0000000000000140
R13: ffff88807fc8e400 R14: ffff88807fc8e3f4 R15: 0000000000000011
FS: 00007fbac5e006c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbac5e00d58 CR3: 000000001238e000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
vlan_get_protocol_dgram+0x165/0x290 net/packet/af_packet.c:585
packet_recvmsg+0x948/0x1ef0 net/packet/af_packet.c:3552
sock_recvmsg_nosec net/socket.c:1033 [inline]
sock_recvmsg+0x22f/0x280 net/socket.c:1055
____sys_recvmsg+0x1c6/0x480 net/socket.c:2803
___sys_recvmsg net/socket.c:2845 [inline]
do_recvmmsg+0x426/0xab0 net/socket.c:2940
__sys_recvmmsg net/socket.c:3014 [inline]
__do_sys_recvmmsg net/socket.c:3037 [inline]
__se_sys_recvmmsg net/socket.c:3030 [inline]
__x64_sys_recvmmsg+0x199/0x250 net/socket.c:3030
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 79eecf631c14 ("af_packet: Handle outgoing VLAN packets without hardware offloading")
Reported-by: syzbot+74f70bb1cb968bf09e4f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6772c485.050a0220.2f3838.04c5.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Chengen Du <chengen.du@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241230161004.2681892-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Chuck Lever
Jeff Layton
Yang Erkun
Olga Kornievskaia
NeilBrown
Scott Mayhew
Chen Hanxiao
Linus Torvalds
Thomas Weißschuh
Jens Axboe
Mark Zhang
Meghana Malladi
MD Danish Anwar
Paolo Abeni
Eric Dumazet