aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-07-22ARM: dts: mmp2: Add #power-domain-cells to /clocksLubomir Rintel1-0/+1
The power management unit, described by the soc_clocks node, controls the power to the peripherals by the means of power domains with a single cell -- the domain number. Link: https://lore.kernel.org/r/20200718205019.184927-4-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Delete #address-cells from ssp3Lubomir Rintel1-1/+2
On the XO-1.75, this node represents a bus interface that operates in slave mode and thus is only able to accommodate a single subnode; no address cells are necessary. The Documentation/devicetree/bindings/spi/spi-controller.yaml binding prefers that we drop the property instead of setting it to zero. This fixes a DT validation error: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: { ... } is valid under each of {'required': ['spi-slave']}, {'required': ['#address-cells']} We also need to drop #size-cells: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: '#address-cells' is a dependency of '#size-cells' Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Fix camera I2C node validationLubomir Rintel1-3/+3
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0: 'camera_i2c' does not match '^i2c(@.*)?' mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property The "gpios" property actually was documented as deprecated, but got dropped in commit 0175ce4a58d6 ("dt-bindings: i2c: Convert i2c-gpio binding to json-schema"). It's probably best kept forgotten though. Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-21ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkxAmelie Delaunay1-1/+1
Now that USB OTG driver supports usb role switch by overriding PHY input signals (A-Valid, B-Valid and Vbus-Valid), enable it on stm32mp15xx-dkx. dr_mode needn't to be forced to Peripheral anymore, it is set to OTG in SoC device tree. USB role (USB_ROLE_NONE, USB_ROLE_DEVICE, USB_ROLE_HOST) will be provided by STUSB1600 Type-C controller driver. This patch depends on "Add STUSB160x Type-C port controller support" series, which is under review. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: Add compatibles for syscon for stm32mp151Benjamin Gaignard1-1/+1
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: Add compatibles for syscon for stm32h743Benjamin Gaignard1-3/+3
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: Add compatibles for syscon for stm32f746Benjamin Gaignard1-3/+3
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: Add compatibles for syscon for stm32f426Benjamin Gaignard1-3/+3
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21dt-bindings: arm: stm32: Add compatibles for syscon nodesBenjamin Gaignard1-1/+13
Since commit ad440432d1f9 ("dt-bindings: mfd: Ensure 'syscon' has a more specific compatible") it is required to provide at least 2 compatibles string for syscon node. This patch document the missing compatibles for stm32 SoCs. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrlPatrick Delaunay1-14/+14
Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins are not in BANK Z. Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkxFabrice Gasnier1-0/+13
Configure I2C5 on stm32mp15 DK boards. It's available and can be used on: - Arduino connector - GPIO expansion connector Keep it disabled by default, so the pins are kept in their initial state to lower power consumption. This way they can also be used as GPIO. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: add usart2 node to stm32mp157c-dk2Erwan Le Ray1-0/+9
Adds the usart2 node to stm32mp157c-dk2 board. usart2 pins are connected to Bluetooth component. usart2 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boardsErwan Le Ray3-0/+10
Adds uart7 node to stm32mp15xx-dkx and uart7 alias to stm32mp157a-dk1 and stm32mp157c-dk2 boards. uart7 pins are connected to Arduino connector. uart7 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: add usart3 node to stm32mp157c-ev1Erwan Le Ray1-0/+15
Adds the usart3 node to stm32mp157c-ev1 board. usart3 pins are connected to GPIO Expansion connector. usart3 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boardsErwan Le Ray3-0/+11
Adds usart3 node to stm32mp15xx-dkx and usart3 alias to stm32mp157a-dk1 and stm32mp157c-dk2 boards. usart3 pins are connected to GPIO Expansion connector. usart3 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrlErwan Le Ray1-0/+138
Adds usart2_pins_c, usart3_pins_b, usart3_pins_c and uart7_pins_c pins configurations in stm32mp15-pinctrl. - usart2_pins_c pins are connected to Bluetooth chip on dk2 board. - usart3_pins_b pins are connected to GPIO expansion connector on evx board. - usart3_pins_c pins are connected to GPIO expansion connector on dkx board. - uart7_pins_c pins are connected to Arduino Uno connector on dkx board. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrlPatrick Delaunay1-5/+4
Use tabs where possible and remove multiple blanks lines. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-20ARM: dts: exynos: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-07-20arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPsChen-Yu Tsai1-0/+1
The Bananapi M2 Plus H5 v1.2 can work with the standard H5 OPPs. Tie them in to enable CPU frequency scaling. The original Bananapi M2 Plus H5 is left out for now, as adding the fixed regulator along with the enable pin seemed to cause some glitching in Linux. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200717160053.31191-9-wens@kernel.org
2020-07-20arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPsChen-Yu Tsai1-0/+1
The Libre Computer ALL-H3-CC H5 variant can work with the standard H5 OPPs. Tie them in to enable CPU frequency scaling. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200717160053.31191-8-wens@kernel.org