| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On Sapphire Rapids and related platforms, the DSA and IAA devices have an
erratum that causes direct access (for example, by using the ENQCMD or
MOVDIR64 instructions) from untrusted applications to be a security problem.
To solve this, add a flag to the PCI device enumeration and device structures
to indicate the presence/absence of this security exposure. In the mmap()
method of the device, this flag is then used to enforce that the user
has the CAP_SYS_RAWIO capability.
In a future patch, a write() based method will be added that allows untrusted
applications submit work to the accelerator, where the kernel can do
sanity checking on the user input to ensure secure operation of the accelerator.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.
The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
arch/sh/kernel/setup.c:244:12: warning: no previous prototype for 'sh_fdt_init' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/7e3ea09e706a075bceb6bfd172990676e79be1c2.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/smp.c:326:5: warning: no previous prototype for 'setup_profiling_timer' [-Wmissing-prototypes]
The function is unconditionally defined in smp.c, but conditionally
declared in <linux/profile.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/effa5eecbd2389c6661974e91bb834db210989ea.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/of-generic.c:146:20: warning: no previous prototype for 'arch_init_clk_ops' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/942621553ed82e3331e2e91485b643892d2d08bc.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
The G2-to-PCI bridge chip found in SEGA Dreamcast assumes P2 area
relative addresses.
Set the appropriate IOPORT base offset.
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240511191614.68561-2-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Dan Carpenter reports:
Commit cbeb479ff4cd ("hwmon: (nzxt-kraken3) Decouple device names
from kinds") from Apr 28, 2024 (linux-next), leads to the following
Smatch static checker warning:
drivers/hwmon/nzxt-kraken3.c:957 kraken3_probe()
error: uninitialized symbol 'device_name'.
Indeed, 'device_name' will be uninitizalized if an unknown product is
encountered. In practice this should not matter because the driver
should not instantiate on unknown products, but lets play safe and
bail out if that happens.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/b1738c50-db42-40f0-a899-9c027c131ffb@moroto.mountain/
Cc: Jonas Malaco <jonas@protocubo.io>
Cc: Aleksa Savic <savicaleksa83@gmail.com>
Fixes: cbeb479ff4cd ("hwmon: (nzxt-kraken3) Decouple device names from kinds")
Acked-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
|
|
EMC1428 and EMC1438 are similar to EMC14xx, but have eight temperature
channels, as well as signed data and limit registers. Chips currently
supported by this driver have unsigned registers only.
Signed-off-by: Lars Petter Mostad <larspm@gmail.com>
Link: https://lore.kernel.org/r/20240510142824.824332-1-lars.petter.mostad@appear.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If TEST_F() explicitly calls exit(code) with code different than 0, then
_metadata->exit_code is set to this code (e.g. KVM_ONE_VCPU_TEST()). We
need to keep in mind that _metadata->exit_code can be KSFT_SKIP while
the process exit code is 0.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Reported-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Closes: https://lore.kernel.org/r/ZjPelW6-AbtYvslu@google.com
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Link: https://lore.kernel.org/r/20240511171445.904356-11-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Setting the time namespace with CLONE_NEWTIME returns -EUSERS if the
calling thread shares memory with another thread (because of the shared
vDSO), which is the case when it is created with vfork().
Fix pidfd_setns_test by replacing test harness's vfork() call with a
clone3() call with CLONE_VFORK, and an explicit sharing of the
_metadata and self objects.
Replace _metadata->teardown_parent with a new FIXTURE_TEARDOWN_PARENT()
helper that can replace FIXTURE_TEARDOWN(). This is a cleaner approach
and it enables to selectively share the fixture data between the child
process running tests and the parent process running the fixture
teardown. This also avoids updating several tests to not rely on the
self object's copy-on-write property (e.g. storing the returned value of
a fork() call).
Cc: Christian Brauner <brauner@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403291015.1fcfa957-oliver.sang@intel.com
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-10-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Unconditionally share _metadata between all forked processes, which
enables to actually catch errors which were previously ignored.
This is required for a following commit replacing vfork() with clone3()
and CLONE_VFORK (i.e. not sharing the full memory) . It should also be
useful to share _metadata to extend expectations to test process's
forks. For instance, this change identified a wrong expectation in
pidfd_setns_test.
Because this _metadata is used by the new XFAIL_ADD(), use a global
pointer initialized in TEST_F(). This is OK because only XFAIL_ADD()
use it, and XFAIL_ADD() already depends on TEST_F().
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Will Drewry <wad@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-9-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Replace a wrong EXPECT_GT(self->child_pid_exited, 0) with EXPECT_GE(),
which will be actually tested on the parent and child sides with a
following commit.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240511171445.904356-8-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
FIXTURE_VARIANT_ADD() types are passed as const pointers to
FIXTURE_TEARDOWN(). Make that explicit by constifying the variants
declarations.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Will Drewry <wad@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-7-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Do not allocate self->dir_path in the test process because this would
not be visible in the FIXTURE_TEARDOWN() process when relying on
fork()/clone3() instead of vfork().
This change is required for a following commit removing vfork() call to
not break the layout3_fs.* test cases.
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-6-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Fix a race condition when running several FIXTURE_TEARDOWN() managing
the same resource. This fixes a race condition in the Landlock file
system tests when creating or unmounting the same directory.
Using clone3() with CLONE_VFORK guarantees that the child and grandchild
test processes are sequentially scheduled. This is implemented with a
new clone3_vfork() helper replacing the fork() call.
This avoids triggering this error in __wait_for_test():
Test ended in some other way [127]
Cc: Christian Brauner <brauner@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Fixes: 41cca0542d7c ("selftests/harness: Fix TEST_F()'s vfork handling")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Make sure fixture teardowns are run when test cases failed, including
when _metadata->teardown_parent is set to true.
Make sure only one fixture teardown is run per test case, handling the
case where the test child forks.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shengyu Li <shengyu.li.evgeny@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 72d7cb5c190b ("selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWN")
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-4-mic@digikod.net
Rule: add
Link: https://lore.kernel.org/stable/20240506165518.474504-4-mic%40digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
According to the test environment, the mount point of the test's working
directory may be shared or not, which changes the visibility of the
nested "tmp" mount point for the test's parent process calling
umount("tmp").
This was spotted while running tests in containers [1], where mount
points are private.
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://github.com/landlock-lsm/landlock-test-tools/pull/4 [1]
Fixes: 41cca0542d7c ("selftests/harness: Fix TEST_F()'s vfork handling")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Required by switch_timens() to open /proc/self/ns/time_for_children.
CONFIG_GENERIC_VDSO_TIME_NS is not available on UML, so pidfd_setns_test
cannot be run successfully on this architecture.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 2b40c5db73e2 ("selftests/pidfd: add pidfd setns tests")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240511171445.904356-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on csky.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
Co-developed-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-csky@vger.kernel.org>
|
|
This reverts commit 52a6947bf576b97ff8e14bb0a31c5eaf2d0d96e2.
This causes loading failures in
[ 0.367379] nouveau 0000:01:00.0: NVIDIA GP104 (134000a1)
[ 0.474499] nouveau 0000:01:00.0: bios: version 86.04.50.80.13
[ 0.474620] nouveau 0000:01:00.0: pmu: firmware unavailable
[ 0.474977] nouveau 0000:01:00.0: fb: 8192 MiB GDDR5
[ 0.484371] nouveau 0000:01:00.0: sec2(acr): mbox 00000001 00000000
[ 0.484377] nouveau 0000:01:00.0: sec2(acr):load: boot failed: -5
[ 0.484379] nouveau 0000:01:00.0: acr: init failed, -5
[ 0.484466] nouveau 0000:01:00.0: init failed with -5
[ 0.484468] nouveau: DRM-master:00000000:00000080: init failed with -5
[ 0.484470] nouveau 0000:01:00.0: DRM-master: Device allocation failed: -5
[ 0.485078] nouveau 0000:01:00.0: probe with driver nouveau failed with error -50
I tried tracking it down but ran out of time this week, will revisit next week.
Reported-by: Dan Moulding <dan@danm.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Include a .mailmap entry to synchronize with both my past and current
emails. Among them, three business mailboxes are dead.
Link: https://lkml.kernel.org/r/20240506042009.10854-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
the logic to detect the machine architecture in the Makefile was changed
to use ARCH, and only fallback to uname -m if ARCH is unset. However the
tests of ARCH were not updated to account for the fact that ARCH is
"powerpc" for powerpc builds, not "ppc64".
Fix it by changing the checks to look for "powerpc", and change the
uname -m logic to convert "ppc64.*" into "powerpc".
With that fixed the following tests now build for powerpc again:
* protection_keys
* va_high_addr_switch
* virtual_address_range
* write_to_hugetlbfs
Link: https://lkml.kernel.org/r/20240506115825.66415-1-mpe@ellerman.id.au
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> [6.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It incorrectly claimed a resource isn't CPU visible if it's located at
the very end of CPU visible VRAM.
Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-and-Tested-by: Jeremy Day <jsday@noreason.ca>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
|
|
We don't get the right offset in that case. The GPU has
an unused 4K area of the register BAR space into which you can
remap registers. We remap the HDP flush registers into this
space to allow userspace (CPU or GPU) to flush the HDP when it
updates VRAM. However, on systems with >4K pages, we end up
exposing PAGE_SIZE of MMIO space.
Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The original topology evaluation code initialized cpu_data::topo::llc_id
with the die ID initialy and then eventually overwrite it with information
gathered from a CPUID leaf.
The conversion analysis failed to spot that particular detail and omitted
this initial assignment under the assumption that each topology evaluation
path will set it up. That assumption is mostly correct, but turns out to be
wrong in case that the CPUID leaf 0x80000006 does not provide a LLC ID.
In that case, LLC ID is invalid and as a consequence the setup of the
scheduling domain CPU masks is incorrect which subsequently causes the
scheduler core to complain about it during CPU hotplug:
BUG: arch topology borken
the CLS domain not a subset of the MC domain
Cure it by reusing legacy_set_llc() and assigning the die ID if the LLC ID
is invalid after all possible parsers have been tried.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Link: https://lore.kernel.org/r/PUZPR04MB63168AC442C12627E827368581292@PUZPR04MB6316.apcprd04.prod.outlook.com
|
|
If a line is requested with debounce, and that results in debouncing
in software, and the line is subsequently reconfigured to enable edge
detection then the allocation of the kfifo to contain edge events is
overlooked. This results in events being written to and read from an
uninitialised kfifo. Read events are returned to userspace.
Initialise the kfifo in the case where the software debounce is
already active.
Fixes: 65cff7046406 ("gpiolib: cdev: support setting debounce")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240510065342.36191-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Enables the ARCH_AIROHA config by default.
Signed-off-by: Daniel Danzberger <dd@embedd.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/65737ca5506371ef84c3a055e68d280f314e3b41.1709975956.git.lorenzo@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Introduce the Kconfig entry for the Airoha EN7581 multicore architecture
available in the Airoha EN7581 evaluation board.
Signed-off-by: Daniel Danzberger <dd@embedd.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/d52d95db313e6a58ba997ba2181faf78a1014bcc.1709975956.git.lorenzo@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the new PCI Device IDs to the MISC IDs list to support new
generation of AMD 1Ah family 70h Models of processors.
[ bp: Massage commit message. ]
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240510111829.969501-1-Shyam-sundar.S-k@amd.com
|
|
Support to inject result for NOP so that we can inject failure from
userspace. It is very helpful for covering failure handling code in
io_uring core change.
With nop flags, it becomes possible to add more test features on NOP in
future.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240510035031.78874-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The NOP op flags should have been checked from beginning like any other
opcode, otherwise NOP may not be extended with the op flags.
Given both liburing and Rust io-uring crate always zeros SQE op flags, just
ignore users which play raw NOP uring interface without zeroing SQE, because
NOP is just for test purpose. Then we can save one NOP2 opcode.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Fixes: 2b188cc1bb85 ("Add io_uring IO interface")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240510035031.78874-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set up sysfs for the Atmel SHA204a. Provide the content of the otp zone as
an attribute field on the sysfs entry. Thereby make sure that if the chip
is locked, not connected or trouble with the i2c bus, the sysfs device is
not set up. This is mostly already handled in atmel-i2c.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Provide a read function reading the otp zone. The otp zone can be used for
storing serial numbers. The otp zone, as also data zone, are only
accessible if the chip was locked before. Locking the chip is a post
production customization and has to be done manually i.e. not by this
driver. Without this step the chip is pretty much not usable, where
putting or not putting data into the otp zone is optional.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the memory read function name more specific to the read memory zone.
The Atmel SHA204 chips provide config, otp and data zone. The implemented
read function in fact only reads some fields in zone config. The function
renaming allows for a uniform naming scheme when reading from other memory
zones.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add missing description for argument hwrng.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixes the following two Coccinelle/coccicheck warnings reported by
memdup.cocci:
iaa_crypto_main.c:350:19-26: WARNING opportunity for kmemdup
iaa_crypto_main.c:358:18-25: WARNING opportunity for kmemdup
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_killable_timeout() causing patterns like:
timeout = wait_for_completion_killable_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
iMX8ULP have a secure-enclave hardware IP called EdgeLock Enclave(ELE),
that control access to caam controller's register page, i.e., page0.
At all, if the ELE release access to CAAM controller's register page,
it will release to secure-world only.
Clocks are turned on automatically for iMX8ULP. There exists the caam
clock gating bit, but it is not advised to gate the clock at linux, as
optee-os or any other entity might be using it.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CAAM clock initializat is done based on the basis of soc specific
info stored in struct caam_imx_data:
- caam-page0-access flag
- num_clks
CAAM driver needs to be aware of access rights to CAAM control page
i.e., page0, to do things differently.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Dma address mapping fails on unaligned scatterlist offset. Use sw
fallback for these cases.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations.
Cc: <stable@vger.kernel.org> #6.7+
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Skip sw fallback allocation if RSA module failed to get device handle.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Skip dma setup and mapping for AES driver if plaintext is empty.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This isn't modified at runtime. Mark it const so it can move to
read-only data.
Cc: dann frazier <dann.frazier@canonical.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240502233447.420888-1-swboyd@chromium.org
|
|
In "struct dmtimer", the 'rate' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/c9f7579922c587fce334a1aa9651f3189de7a00b.1714513336.git.christophe.jaillet@wanadoo.fr
|
|
The Renesas OS Timer (OSTM) driver contains two probe points, of which
only one should complete:
1. Early probe, using TIMER_OF_DECLARE(), to provide the sole
clocksource on (arm32) RZ/A1 and RZ/A2 SoCs,
2. Normal probe, using a platform driver, to provide additional timers
on (arm64 + riscv) RZ/G2L and similar SoCs.
The latter is needed because using OSTM on RZ/G2L requires manipulation
of its reset signal, which is not yet available at the time of early
probe, causing early probe to fail with -EPROBE_DEFER. It is only
enabled when building a kernel with support for the RZ/G2L family, so it
does not impact RZ/A1 and RZ/A2. Hence only one probe method can
complete on all affected systems.
As relying on the order of initialization of subsystems inside the
kernel is fragile, set the DT node's OF_POPULATED flag after a succesful
early probe. This makes sure the platform driver's probe is never
called after a successful early probe.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviwed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/bd027379713cbaafa21ffe9e848ebb7f475ca0e7.1710930542.git.geert+renesas@glider.be
|
|
The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module,
also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P)
SoC requires the reset line to be deasserted before accessing any
registers.
Early call to ostm_init() happens through TIMER_OF_DECLARE() which always
fails with -EPROBE_DEFER, as resets are not available that early in the
boot process. To address this issue on the RZ/V2H(P) SoC, enable the OSTM
driver to be reprobed through the platform driver probe mechanism.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-3-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Document the General Timer Module (a.k.a OSTM) block on Renesas RZ/V2H(P)
("R9A09G057") SoC, which is identical to the one found on the RZ/A1H and
RZ/G2L SoCs. Add the "renesas,r9a09g057-ostm" compatible string for the
RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
Arjan van de Ven
Geert Uytterhoeven
Artur Rojek
Guenter Roeck
Linus Torvalds
Lars Petter Mostad
Mickaël Salaün
Paul E. McKenney
Dave Airlie
Barry Song
Michael Ellerman
Michel Dänzer
Alex Deucher
Thomas Gleixner
Kent Gibson
Daniel Danzberger
Shyam Sundar S K
Ming Lei
Lothar Rubusch
Thorsten Blum
Wolfram Sang
Pankaj Gupta
Jia Jie Ho
Stephen Boyd
Christophe JAILLET
Lad Prabhakar