| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch fixes the private_flags of mode to be checked and
compared against uapi.mode and not from hw.mode. This helps
properly trigger modeset at boot if desired by driver.
It helps resolve audio_codec initialization issues if display
is connected at boot. Initial discussion on this issue has happened
on below thread:
https://patchwork.freedesktop.org/series/74828/
v2: No functional change. Fixed the Closes tag and added
Maarten's RB.
v3: Added Fixes tag.
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Souza, Jose <jose.souza@intel.com>
Fixes: 58d124ea2739 ("drm/i915: Complete crtc hw/uapi split, v6.")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363
Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com
(cherry picked from commit d5e56705927e00f703b2eb5a98299dd6622d16e5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We move the virtual breadcrumb from one physical engine to the next, if
the next virtual request is scheduled on a new physical engine. Since
the virtual context can only be in one signal queue, we need it to track
the current physical engine for the new breadcrumbs. However, to move
the list we need both breadcrumb locks -- and since we cannot take both
at the same time (unless we are careful and always ensure consistent
ordering) stage the movement of the signaler via the current virtual
request.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1510
Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325130059.30600-1-chris@chris-wilson.co.uk
(cherry picked from commit 6c81e21a4742385c00713137c6fdcade0412e93c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On Ivybridge, we can go lower than rc6 to rc6p. And this is required for
Ivybridge to hit the same minimum power consumption as rc6 on other
platforms, so make it so.
v2: Update selftest to include all rc6 residency counters
Note that Andi did mention that we should be converting the magic
numbers into opaque magic macros, so if they ever get reused (unlikely
given only Ivybridge used the extra modes) we'll need to pay back the
technical debt.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518
Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk
(cherry picked from commit 13c5a577b342d80ea06b7300ce69420a2d0928ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Abuse^W Take advantage that we know we are inside the GT wakeref and
that prevents any client execbuf from reopening the i915_vma in order to
claim all the vma to close without having to drop the spinlock to free
each one individually. By keeping the spinlock, we do not have to
restart if we run concurrently with i915_gem_free_objects -- which
causes them both to restart continually and make very very slow
progress.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1361
Fixes: 77853186e547 ("drm/i915: Claim vma while under closed_lock in i915_vma_parked()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-2-chris@chris-wilson.co.uk
(cherry picked from commit 3447c4c55d0edc95742fdcd91c3efb050546b907)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we park/unpark faster than we can respond to RPS events, we never
will process a downclock event after expiring a waitboost, and thus we
will forever restart the GPU at max clocks even if the workload switches
and doesn't justify full power.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500
Fixes: 3e7abf814193 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v5.5+
(cherry picked from commit 21abf0bf168dffff1192e0f072af1dc74ae1ff0e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use the restored ability to check if a context is closed to decide
whether or not to immediately ban the context from further execution
after a hang.
Fixes: be90e344836a ("drm/i915/gt: Cancel banned contexts after GT reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-2-chris@chris-wilson.co.uk
(cherry picked from commit 8e37d699139128139c0468e005c2f0d6215b0c55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
I need to keep the GEM context around a bit longer so adding an explicit
flag for syncing execbuf with closed/abandonded contexts.
v2:
* Use already available context flags. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-1-chris@chris-wilson.co.uk
(cherry picked from commit 207e4a71fb53e761be72daaeb78a49225bc31c69)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On running several back to back perf capture sessions involving closing
and opening the perf stream, invalid OA reports are seen in the
beginning of the OA buffer in some sessions. Fix this by invalidating OA
TLB when the perf stream is closed or disabled on gen12.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309211057.38575-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit a639b0c15065df930467695b76ef38d5edaed049)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Beware that the context may already be closed as we try to lookup an
engine.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1389
Fixes: 130a95e9098e ("drm/i915/gem: Consolidate ctx->engines[] release")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316161447.18410-1-chris@chris-wilson.co.uk
(cherry picked from commit a22f34783476a39d157b60485285aaa43554cb2d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The residual w/a batch is causing system instablity on Ivybridge and
Baytrail under some workloads, so disable until resolved.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1405
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311103640.26572-1-chris@chris-wilson.co.uk
(cherry picked from commit a62774782b994026ac3198bf115717d55d536166)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There are spelling mistakes in pr_err messages and a comment. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
clang warns:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:6: warning: variable 'shadow'
is used uninitialized whenever 'if' condition is
false [-Wsometimes-uninitialized]
if (offset == grbm_cntl || offset == grbm_idx)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:757:6: note: uninitialized use
occurs here
if (shadow) {
^~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:2: note: remove the 'if' if
its condition is always true
if (offset == grbm_cntl || offset == grbm_idx)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:738:13: note: initialize the
variable 'shadow' to silence this warning
bool shadow;
^
= 0
1 warning generated.
shadow is only assigned in one condition and used as the condition for
another if statement; combine the two if statements and remove shadow
to make the code cleaner and resolve this warning.
Fixes: 2e0cc4d48b91 ("drm/amdgpu: revise RLCG access path")
Link: https://github.com/ClangBuiltLinux/linux/issues/936
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix typo for vcn2.5/jpeg2.5 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix typo for vcn2/jpeg2 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix typo for vcn1 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The CAP fw is for enabling driver compatibility. Currently, it only
enabled for vega10 VF.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
issue smu cmd to disable all features upon baco entry for arcturus
to mitigate potential dirty I2C controller on boot
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Originally, only the PTE valid is taken in consider.
The PRT case is missied when bo update which raise problem.
We need add condition for PRT case.
v2: add PRT condition for amdgpu_vm_bo_update_mapping, too
v3: fix one typo error
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adds logic that will determine if pipes need merging during validation.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The scratch space can be used to pass data between x86 and DMCUB. DMCUB
will manage the actually mapping of CW7 internally, driver does not
program the window.
[How]
Allocate extra space within the DMUB service's framebuffer for this
scratch space and expose them from the service for use in DC.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
before update dpp DTO, we check dppclks in context to determine it is
changed or not, but dppclks in context will be updated anyways after
flip is done, so compare dppclks in context will always get an equal
result.
[How]
Add pipe dpp clks in dccg and compare values between dccg and context.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Causes regression with MST DSC displays not lighting up after DPMS
[how]
Revert commit 8cc426d79be1c3 ("drm/amd/display: Program DSC during timing programming")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
underflow happened when playing video on 1366x768 + 4K clone mode due to
incorrect handle watermark change flag and lower down clocks to early.
[How]
Check watermark change flag when decide doing optimized, and check
optimized required flag to do clock update.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
this register not exist in some asic, based on request remove this from
dc.
[how]
add guard for sanization.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We should check MST BU support capability on output port before building
vsc info packet.
[How]
Add a new definition for port and sink capability check.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
In headless boot cases, self refresh control registers are not
programmed on boot. In certain hybrid graphics cases this may cause
cstate entering to get blocked causing a hang.
[HOW]
Program self refresh control register on boot.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
DP doesn't have message id as the first byte of an hdcp message,
current hdcp psp unifies HDMI and DP message so that it is required
when reading DP HDCP messages in hdcp_ddc, a message id needs to be
added as the first byte of the HDCP message.
The id is currently assigned as a magic number which is not a good
coding practice.
[how]
Replace magic numbers with macro defined in hdcp headers.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We want to be able to enable/disable psr on dmcub and fallback to dmcu
when necessary.
[How]
Use dc config option to do so.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The default value for disable_dmcu is true, even for asics that require
dmcu.
[How]
Set flag properly per asic.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The PSR enablement was dependent on swizzle as a workaround for
non-pageflipping fb console. It's no longer required.
[How]
Remove PSR-enable dependency on swizzle mode.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This is enabled by default on Renoir but there's userspace/API support
to actually make use of this.
Since we're not passing this down through surface updates, let's
explicitly disable this for now.
This fixes "dcn20_program_front_end_for_ctx" warnings associated with
incorrect/unexpected programming sequences performed while this is
enabled.
[How]
Disable it at the topmost level in DM in case anyone tries to flip this
to enabled for any of the other ASICs like Navi10/14.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
A "dcn20_program_front_end_for_ctx" warning is observed on Renoir.
Since the resource definition doesn't explicitly disable triplebuffer
flips like Navi10 DC actually attempts to go and setup triplebuffering
even when we pass in false to the plane state.
If we hit a full update after triplebuffering has been setup we see the
assertion since we don't expect full updates while performing
triplebuffer flips.
Normally this would get reset back to false whne we pass in the new
plane state, but since we never actually copy the flag when doing
surface updates this doesn't happen.
[How]
Copy the flag onto the plane update based on the requested surface
update state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Right now only stream count is used to avoid split. This change updates
the W/A to check plane count instead.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When hotplug a HDMI monitor during entering S0i3 or DPMSOFF state due to
entering infinite loop when calling vbios to program pixel clocks. In
this scenario, pll is enabled but phy is not, and there is not a
programing guide for this case.
[How]
Before we having the proper programing guide, before disable pll, doing
a phy enable and disable to avoid the issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Due to previous code changes displays which are in active state
immediately transition to the active and added state. This makes the two
states redundant and unnecessary.
[How]
Instead of updating the device state to active and added after
successful addition, change state to inactive if addition failed. Also,
change references to active and added state to just added state.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When reprogram MSA with updated color space, the test color space shows
inconsistency. Linux has separate routine to set up test pattern color
space, but it fails to configure RGB.
[How]
Add RGB to test pattern.
Fixes: 43563bc2e6a769 ("drm/amd/display: update MSA and VSC SDP on video test pattern request")
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
drm_connector->display_info is not passed to amdgpu_dm right way after
read edid.
[How]
display_info is parsed from edid and saved into drm_connector by
drm_connector_update_edid_proerty which is called within
amdgpu_dm_update_connector_after_detect. call this function after read
edid to update drm_connector->display_info
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Not programming dto with same values causes test failures in DCN2 diags
DPP tests.
[HOW]
This reverts commit 1b53e733238c0f7faa4744ec7c8c6f193649f168.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
lri ususally of variable len and far exceeding 127 dwords.
Fixes: 00a33be40634 ("drm/i915/gvt: Add valid length check for MI variable commands")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304095121.21609-1-yan.y.zhao@intel.com
|
|
This cmd access is found on BDW.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200305055413.6833-1-yan.y.zhao@intel.com
|
|
htotal*vtotal*vrefresh ~= clock. So just use say "clock" when we mean it.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Replace the hand rolled encoder bitmask thing with drm_encoder_mask()
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
According to the vbt provided by GVT-g, the display output type should
be display port, instead of DVI. Currently, GVT-g display model only
supports display port emulation, not DVI or HDMI. This patch fixes this
by telling guest i915 the right output type supported by GVT-g.
v3: make port_b and port_c use dp type connector too. (Zhenyu)
v2: refine the commit message. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200317093615.10538-1-tina.zhang@intel.com
|
|
Those regs are added in order to slove the following complains:
[70811.201818] gvt: vgpu(1) Invalid FORCE_NONPRIV write 2341 at offset 24d8
[70811.201825] gvt: vgpu(1) Invalid FORCE_NONPRIV write 2351 at offset 24dc
[70811.201831] gvt: vgpu(1) Invalid FORCE_NONPRIV write 10000d82 at offset 24e0
[70811.201837] gvt: vgpu(1) Invalid FORCE_NONPRIV write 10064844 at offset 24e4
So solve them by adding the required regs to the whitelist.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200302083130.17831-1-tina.zhang@intel.com
|
|
VCN HW doesn't support dynamic load balance on multiple instances
for a context. This patch initializes VNC entities with only one
drm_gpu_scheduler picked by drm_sched_pick_best(). Picking a
drm_gpu_scheduler using drm_sched_pick_best() ensures that we
do load balance among multiple contexts but not among multiple
jobs in a context.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove drm_sched_entity_get_free_sched() and use the logic of picking
the least loaded drm scheduler from a drm scheduler list to implement
drm_sched_pick_best(). This patch also exports drm_sched_pick_best() so
that it can be utilized by other drm drivers.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It needs to revert this patch to avoid amdgpu_test compute hang problem
on picasso.
This reverts commit 56822db194232c089601728d68ed078dccb97f8b.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Puts the i2c adapter in common place for sharing by RAS
and upcoming data read from FRU EEPROM feature.
v2:
Move i2c adapter to amdgpu_pm and rename it.
v3: Move i2c adapter init to ASIC specific code and get rid
of the switch case in amdgpu_device
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Job fence on page table should be a shared one, so add it to the root
page talbe bo resv.
last_delayed field is not needed anymore. so remove it.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix switch-case indentation in amdgpu_ctx_init_entity()
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Uma Shankar
Chris Wilson
Umesh Nerlige Ramappa
Colin Ian King
Nathan Chancellor
James Zhu
Zhigang Luo
John Clements
Yintian Tao
Dmytro Laktyushkin
Wyatt Wood
Yongqiang Sun
Nikola Cornij
Charlene Liu
Martin Tsai
Sung Lee
Wenjing Liu
Roman Li
Nicholas Kazlauskas
Isabel Zhang
Jerry (Fangzhi) Zuo
Hersen Wu
Yan Zhao
Ville Syrjälä
Tina Zhang
Nirmoy Das
changzhu
Andrey Grodzovsky
xinhui pan