| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The PEBS counters snapshotting group also requires a group flag in the
leader. The leader must be a X86 event.
Fixes: e02e9b0374c3 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-3-kan.liang@linux.intel.com
|
|
A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.
perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1
It's because the group is mistakenly treated as a branch counter group.
The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.
For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.
There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.
Fixes: 33744916196b ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
|
|
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbbd2 ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
|
|
Commit:
f4b07fd62d4d11d5 ("perf/core: Use POLLHUP for pinned events in error")
started to emit POLLHUP for pinned events in an error state.
But the POLLHUP is also used to signal events that the attached task is
terminated. To distinguish pinned per-task events in the error state
it would need to check if the task is live.
Change it to POLLERR to make it clear.
Suggested-by: Gabriel Marin <gmx@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250422223318.180343-1-namhyung@kernel.org
|
|
On IMA policy update, if a measure rule exists in the policy,
IMA_MEASURE is set for ima_policy_flags which makes the violation_check
variable always true. Coupled with a no-action on MAY_READ for a
FILE_CHECK call, we're always taking the inode_lock().
This becomes a performance problem for extremely heavy read-only workloads.
Therefore, prevent this only in the case there's no action to be taken.
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
I had left the warning around but as a non-fatal error to get my gcc-15
builds going, but fixed up some of the most annoying warning cases so
that it wouldn't be *too* verbose.
Because I like the _concept_ of the warning, even if I detested the
implementation to shut it up.
It turns out the implementation to shut it up is even more broken than I
thought, and my "shut up most of the warnings" patch just caused fatal
errors on gcc-14 instead.
I had tested with clang, but when I upgrade my development environment,
I try to do it on all machines because I hate having different systems
to maintain, and hadn't realized that gcc-14 now had issues.
The ACPI case is literally why I wanted to have a *type* that doesn't
trigger the warning (see commit d5d45a7f2619: "gcc-15: make
'unterminated string initialization' just a warning"), instead of
marking individual places as "__nonstring".
But gcc-14 doesn't like that __nonstring location that shut gcc-15 up,
because it's on an array of char arrays, not on one single array:
drivers/acpi/tables.c:399:1: error: 'nonstring' attribute ignored on objects of type 'const char[][4]' [-Werror=attributes]
399 | static const char table_sigs[][ACPI_NAMESEG_SIZE] __initconst __nonstring = {
| ^~~~~~
and my attempts to nest it properly with a type had failed, because of
how gcc doesn't like marking the types as having attributes, only
symbols.
There may be some trick to it, but I was already annoyed by the bad
attribute design, now I'm just entirely fed up with it.
I wish gcc had a proper way to say "this type is a *byte* array, not a
string".
The obvious thing would be to distinguish between "char []" and an
explicitly signed "unsigned char []" (as opposed to an implicitly
unsigned char, which is typically an architecture-specific default, but
for the kernel is universal thanks to '-funsigned-char').
But any "we can typedef a 8-bit type to not become a string just because
it's an array" model would be fine.
But "__attribute__((nonstring))" is sadly not that sane model.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 4b4bd8c50f48 ("gcc-15: acpi: sprinkle random '__nonstring' crumbles around")
Fixes: d5d45a7f2619 ("gcc-15: make 'unterminated string initialization' just a warning")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf15129 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gcc-15 enabling -Wunterminated-string-initialization in -Wextra by
default was done with the best intentions, but the warning is still
quite broken.
What annoys me about the warning is that this is a very traditional AND
CORRECT way to initialize fixed byte arrays in C:
unsigned char hex[16] = "0123456789abcdef";
and we use this all over the kernel. And the warning is fine, but gcc
developers apparently never made a reasonable way to disable it. As is
(sadly) tradition with these things.
Yes, there's "__attribute__((nonstring))", and we have a macro to make
that absolutely disgusting syntax more palatable (ie the kernel syntax
for that monstrosity is just "__nonstring").
But that attribute is misdesigned. What you'd typically want to do is
tell the compiler that you are using a type that isn't a string but a
byte array, but that doesn't work at all:
warning: ‘nonstring’ attribute does not apply to types [-Wattributes]
and because of this fundamental mis-design, you then have to mark each
instance of that pattern.
This is particularly noticeable in our ACPI code, because ACPI has this
notion of a 4-byte "type name" that gets used all over, and is exactly
this kind of byte array.
This is a sad oversight, because the warning is useful, but really would
be so much better if gcc had also given a sane way to indicate that we
really just want a byte array type at a type level, not the broken "each
and every array definition" level.
So now instead of creating a nice "ACPI name" type using something like
typedef char acpi_name_t[4] __nonstring;
we have to do things like
char name[ACPI_NAMESEG_SIZE] __nonstring;
in every place that uses this concept and then happens to have the
typical initializers.
This is annoying me mainly because I think the warning _is_ a good
warning, which is why I'm not just turning it off in disgust. But it is
hampered by this bad implementation detail.
[ And obviously I'm doing this now because system upgrades for me are
something that happen in the middle of the release cycle: don't do it
before or during travel, or just before or during the busy merge
window period. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit ddee68c499f76ae47c011549df5be53db0057402.
There's ongoing discussion about better maintenance of at least hfsplus.
Rever the deprecation warning for now.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
IB_SIZE is only b0..b19. Starting with a6xx gen3, additional fields
were added above the IB_SIZE. Accidentially setting them can cause
badness. Fix this by properly defining the CP_INDIRECT_BUFFER packet
and using the generated builder macro to ensure unintended bits are not
set.
v2: add missing type attribute for IB_BASE
v3: fix offset attribute in xml
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Fixes: a83366ef19ea ("drm/msm/a6xx: add A640/A650 to gpulist")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/643396/
|
|
Running the following commands was broken:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
And would produce nothing when it should have produced something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Add a test to check this case so that it will be caught if it breaks
again.
Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Communicating with the hypervisor using the shared GHCB page requires
clearing the C bit in the mapping of that page. When executing in the
context of the EFI boot services, the page tables are owned by the
firmware, and this manipulation is not possible.
So switch to a different API for accepting memory in SEV-SNP guests, one
which is actually supported at the point during boot where the EFI stub
may need to accept memory, but the SEV-SNP init code has not executed
yet.
For simplicity, also switch the memory acceptance carried out by the
decompressor when not booting via EFI - this only involves the
allocation for the decompressed kernel, and is generally only called
after kexec, as normal boot will jump straight into the kernel from the
EFI stub.
Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1
Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2
Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission
|
|
Erratum 1054 affects AMD Zen processors that are a part of Family 17h
Models 00-2Fh and the workaround is to not set HWCR[IRPerfEn]. However,
when X86_FEATURE_ZEN1 was introduced, the condition to detect unaffected
processors was incorrectly changed in a way that the IRPerfEn bit gets
set only for unaffected Zen 1 processors.
Ensure that HWCR[IRPerfEn] is set for all unaffected processors. This
includes a subset of Zen 1 (Family 17h Models 30h and above) and all
later processors. Also clear X86_FEATURE_IRPERF on affected processors
so that the IRPerfCount register is not used by other entities like the
MSR PMU driver.
Fixes: 232afb557835 ("x86/CPU/AMD: Add X86_FEATURE_ZEN1")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/caa057a9d6f8ad579e2f1abaa71efbd5bd4eaf6d.1744956467.git.sandipan.das@amd.com
|
|
There is a problem with page pools not dma-unmapping immediately when
the device is going down, and delaying it until the page pool is
destroyed, which is not allowed (see links). That just got fixed for
normal page pools, and we need to address memory providers as well.
Unmap pages in the memory provider uninstall callback, and protect it
with a new lock. There is also a gap between when a dma mapping is
created and the mp is installed, so if the device is killed in between,
io_uring would be holding on to dma mappings to a dead device with no
one to call ->uninstall. Move it to page pool init and rely on
->is_mapped to make sure it's only done once.
Link: https://lore.kernel.org/lkml/8067f204-1380-4d37-8ffd-007fc6f26738@kernel.org/T/
Link: https://lore.kernel.org/all/20250409-page-pool-track-dma-v9-0-6a9ef2e0cba8@redhat.com/
Fixes: 34a3e60821ab9 ("io_uring/zcrx: implement zerocopy receive pp memory provider")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ef9b7db249b14f6e0b570a1bb77ff177389f881c.1744965853.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We place this under memory mapping as related to memory mapping
abstractions in the form of mm_struct and vm_area_struct (VMA). Now we
have separated out mmap/vma locking logic into the mmap_lock.c and
mmap_lock.h files, so this should encapsulate the majority of the mm
locking logic in the kernel.
Suren is best placed to maintain this logic as the core architect of VMA
locking as a whole.
Link: https://lkml.kernel.org/r/e6ed679a184ca444b20dfa77af96913fd8b5efa0.1744799282.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Vlastimil points out an issue with kswapd in defrag_mode not waking up
kcompactd reliably.
Background: When kswapd is woken for any higher-order request, it
initially checks those high-order watermarks to decide if work is
necesary. However, it cannot (efficiently) meet the contiguity goal of
such a request by itself. So once it has reclaimed a compaction gap, it
adjusts the request down to check for free order-0 pages, then wakes
kcompactd to coalesce them into larger blocks.
In defrag_mode, the initial watermark check needs to be analogously
against free pageblocks. However, once kswapd drops the high-order to
hand off contiguity work, it also needs to fall back to base page
watermarks - otherwise it'll keep reclaiming until blocks are freed.
While it appears kcompactd is woken up frequently enough to do most of the
compaction work, kswapd ends up overreclaiming by quite a bit:
DEFRAGMODE DEFRAGMODE-thispatch
Hugealloc Time mean 79381.34 ( +0.00%) 88126.12 ( +11.02%)
Hugealloc Time stddev 85852.16 ( +0.00%) 135366.75 ( +57.67%)
Kbuild Real time 249.35 ( +0.00%) 226.71 ( -9.04%)
Kbuild User time 1249.16 ( +0.00%) 1249.37 ( +0.02%)
Kbuild System time 171.76 ( +0.00%) 166.93 ( -2.79%)
THP fault alloc 51666.87 ( +0.00%) 52685.60 ( +1.97%)
THP fault fallback 16970.00 ( +0.00%) 15951.87 ( -6.00%)
Direct compact fail 166.53 ( +0.00%) 178.93 ( +7.40%)
Direct compact success 17.13 ( +0.00%) 4.13 ( -71.69%)
Compact daemon scanned migrate 3095413.33 ( +0.00%) 9231239.53 ( +198.22%)
Compact daemon scanned free 2155966.53 ( +0.00%) 7053692.87 ( +227.17%)
Compact direct scanned migrate 265642.47 ( +0.00%) 68388.33 ( -74.26%)
Compact direct scanned free 130252.60 ( +0.00%) 55634.87 ( -57.29%)
Compact total migrate scanned 3361055.80 ( +0.00%) 9299627.87 ( +176.69%)
Compact total free scanned 2286219.13 ( +0.00%) 7109327.73 ( +210.96%)
Alloc stall 1890.80 ( +0.00%) 6297.60 ( +232.94%)
Pages kswapd scanned 9043558.80 ( +0.00%) 5952576.73 ( -34.18%)
Pages kswapd reclaimed 1891708.67 ( +0.00%) 1030645.00 ( -45.52%)
Pages direct scanned 1017090.60 ( +0.00%) 2688047.60 ( +164.29%)
Pages direct reclaimed 92682.60 ( +0.00%) 309770.53 ( +234.22%)
Pages total scanned 10060649.40 ( +0.00%) 8640624.33 ( -14.11%)
Pages total reclaimed 1984391.27 ( +0.00%) 1340415.53 ( -32.45%)
Swap out 884585.73 ( +0.00%) 417781.93 ( -52.77%)
Swap in 287106.27 ( +0.00%) 95589.73 ( -66.71%)
File refaults 551697.60 ( +0.00%) 426474.80 ( -22.70%)
Link: https://lkml.kernel.org/r/20250416135142.778933-3-hannes@cmpxchg.org
Fixes: a211c6550efc ("mm: page_alloc: defrag_mode kswapd/kcompactd watermarks")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Vlastimil points out that commit a211c6550efc ("mm: page_alloc:
defrag_mode kswapd/kcompactd watermarks") switched kswapd from
zone_watermark_ok_safe() to the standard, percpu-cached version of reading
free pages, thus dropping the watermark safety precautions for systems
with high CPU counts (e.g. >212 cpus on 64G). Restore them.
Since zone_watermark_ok_safe() is no longer the right interface, and this
was the last caller of the function anyway, open-code the
zone_page_state_snapshot() conditional and delete the function.
Link: https://lkml.kernel.org/r/20250416135142.778933-2-hannes@cmpxchg.org
Fixes: a211c6550efc ("mm: page_alloc: defrag_mode kswapd/kcompactd watermarks")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pedro has offered to review memory mapping code. He has good experience
in this area and has provided excellent feedback on memory mapping series
in the past so I feel he'll be a great addition.
Link: https://lkml.kernel.org/r/20250416135301.43513-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In __folio_remove_rmap() for RMAP_LEVEL_PMD/RMAP_LEVEL_PUD and with
CONFIG_PAGE_MAPCOUNT we first decrement the folio mapcount (and recompute
mapped shared vs. mapped exclusively) to then adjust the entire mapcount.
This means that another process might stumble in do_wp_page() over a
PTE-mapped PMD folio that is indicated as "exclusively mapped", but still
has an entire mapcount (PMD mapping), because it is racing with the
process that is unmapping the folio (PMD mapping). Note that do_wp_page()
will back off once it detects the remaining folio reference from the
process that is in the process of unmapping the folio.
This will trigger the early VM_WARN_ON_ONCE(folio_entire_mapcount(folio))
check in do_wp_page(), that can easily be reproduced by looping a couple
of times over allocating a PMD THP, forking a child where we immediately
unmap it again, and writing in the parent concurrently to the THP.
[ 252.738129][T16470] ------------[ cut here ]------------
[ 252.739267][T16470] WARNING: CPU: 3 PID: 16470 at mm/memory.c:3738 do_wp_page+0x2a75/0x2c00
[ 252.740968][T16470] Modules linked in:
[ 252.741958][T16470] CPU: 3 UID: 0 PID: 16470 Comm: ...
...
[ 252.765841][T16470] <TASK>
[ 252.766419][T16470] ? srso_alias_return_thunk+0x5/0xfbef5
[ 252.767558][T16470] ? rcu_is_watching+0x12/0x60
[ 252.768525][T16470] ? srso_alias_return_thunk+0x5/0xfbef5
[ 252.769645][T16470] ? srso_alias_return_thunk+0x5/0xfbef5
[ 252.770778][T16470] ? lock_acquire+0x33/0x80
[ 252.771697][T16470] ? __handle_mm_fault+0x5e8/0x3e40
[ 252.772735][T16470] ? __handle_mm_fault+0x5e8/0x3e40
[ 252.773781][T16470] __handle_mm_fault+0x1869/0x3e40
[ 252.774839][T16470] handle_mm_fault+0x22a/0x640
[ 252.775808][T16470] do_user_addr_fault+0x618/0x1000
[ 252.776847][T16470] exc_page_fault+0x68/0xd0
[ 252.777775][T16470] asm_exc_page_fault+0x26/0x30
While we could adjust the sequence in __folio_remove_rmap(), let's rater
move the mapcount sanity checks after the mapcount vs. refcount
stabilization phase. With this fix, a simple reproducer is happy.
While at it, convert the two VM_WARN_ON_ONCE() we are moving to
VM_WARN_ON_ONCE_FOLIO().
Link: https://lkml.kernel.org/r/20250415095007.569836-1-david@redhat.com
Fixes: 1da190f4d0a6 ("mm: Copy-on-Write (COW) reuse support for PTE-mapped THP")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+5e8feb543ca8e12e0ede@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/67fab4fe.050a0220.2c5fcf.0011.GAE@google.com
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 4eeec8c89a0c ("mm: move hugetlb specific things in folio to
page[3]") shifted hugetlb specific stuff, and now mapping overlaps
_hugetlb_cgroup field.
Upon restoring the vmemmap for HVO, only the first two tail pages are
reset, and this causes the check in free_tail_page_prepare() to fail as it
finds an unexpected mapping value in some tails.
Increment the number of pages to be reset to 4 (head + 3 tail pages)
Link: https://lkml.kernel.org/r/20250415111859.376302-1-osalvador@suse.de
Fixes: 4eeec8c89a0c ("mm: move hugetlb specific things in folio to page[3]")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
inode_to_wb() is used also for filesystems that don't support cgroup
writeback. For these filesystems inode->i_wb is stable during the
lifetime of the inode (it points to bdi->wb) and there's no need to hold
locks protecting the inode->i_wb dereference. Improve the warning in
inode_to_wb() to not trigger for these filesystems.
Link: https://lkml.kernel.org/r/20250412163914.3773459-3-agruenba@redhat.com
Fixes: aaa2cacf8184 ("writeback: add lockdep annotation to inode_to_wb()")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The Microsoft email address is bouncing:
550 5.4.1 Recipient address rejected: Access denied.
So let's replace it with Matteo's current mail address.
Link: https://lkml.kernel.org/r/20250414-fix-mcroce-mail-bounce-v3-1-0aed2d71f3d7@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Matteo Croce <teknoraver@meta.com>
Link: https://lore.kernel.org/all/BYAPR15MB2504E4B02DFFB1E55871955DA1062@BYAPR15MB2504.namprd15.prod.outlook.com/
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Not like fault_in_readable() or fault_in_writeable(), in
fault_in_safe_writeable() local variable 'start' is increased page by page
to loop till the whole address range is handled. However, it mistakenly
calculates the size of the handled range with 'uaddr - start'.
Fix it here.
Andreas said:
: In gfs2, fault_in_iov_iter_writeable() is used in
: gfs2_file_direct_read() and gfs2_file_read_iter(), so this potentially
: affects buffered as well as direct reads. This bug could cause those
: gfs2 functions to spin in a loop.
Link: https://lkml.kernel.org/r/20250410035717.473207-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20250410035717.473207-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Fixes: fe673d3f5bf1 ("mm: gup: make fault_in_safe_writeable() use fixup_user_fault()")
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Yanjun.Zhu <yanjun.zhu@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The madvise code straddles both VMA and page table manipulation. As a
result, separate it out into its own section and add maintainers/reviewers
as appropriate.
We additionally include the mman-common.h file as this contains the shared
madvise flags and it is important we maintain this alongside madvise.c.
Link: https://lkml.kernel.org/r/20250411072724.10841-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Jann Horn <jannh@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MEMORY MAPPING does not list the mmap.h trace point file, but does list
the mmap.c file. Couple the trace points with the users and authors of
the trace points for notifications of updates.
Link: https://lkml.kernel.org/r/20250411173328.8172-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 73f839b6d2ed addressed an issue regarding the swap counter leak
that occurred from an offline cgroup. However, commit 89ce924f0bd4
modified the parameter from @swap_memcg to @memcg (presumably this
alteration was introduced while resolving conflicts). Fix this problem by
reverting this minor change.
Link: https://lkml.kernel.org/r/20250410081812.10073-1-songmuchun@bytedance.com
Fixes: 89ce924f0bd4 ("mm: memcontrol: move memsw charge callbacks to v1")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a subsection for the page allocator, including compaction as it's
crucial for high-order allocations and works together with the
anti-fragmentation features. Add reviewers (including myself) who
voluteered.
Link: https://lkml.kernel.org/r/20250410090021.72296-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Christoph Lameter (Ampere) <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With permission, reduce the number of maintainers. Create a CREDITS entry
for Joonsoo (Pekka already has one). Thanks for all the work!
Link: https://lkml.kernel.org/r/20250410090021.72296-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Christoph Lameter (Ampere) <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Alison reports an issue with fsdax when large extends end up using large
ZONE_DEVICE folios:
[ 417.796271] BUG: kernel NULL pointer dereference, address: 0000000000000b00
[ 417.796982] #PF: supervisor read access in kernel mode
[ 417.797540] #PF: error_code(0x0000) - not-present page
[ 417.798123] PGD 2a5c5067 P4D 2a5c5067 PUD 2a5c6067 PMD 0
[ 417.798690] Oops: Oops: 0000 [#1] SMP NOPTI
[ 417.799178] CPU: 5 UID: 0 PID: 1515 Comm: mmap Tainted: ...
[ 417.800150] Tainted: [O]=OOT_MODULE
[ 417.800583] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 417.801358] RIP: 0010:__lruvec_stat_mod_folio+0x7e/0x250
[ 417.801948] Code: ...
[ 417.803662] RSP: 0000:ffffc90002be3a08 EFLAGS: 00010206
[ 417.804234] RAX: 0000000000000000 RBX: 0000000000000200 RCX: 0000000000000002
[ 417.804984] RDX: ffffffff815652d7 RSI: 0000000000000000 RDI: ffffffff82a2beae
[ 417.805689] RBP: ffffc90002be3a28 R08: 0000000000000000 R09: 0000000000000000
[ 417.806384] R10: ffffea0007000040 R11: ffff888376ffe000 R12: 0000000000000001
[ 417.807099] R13: 0000000000000012 R14: ffff88807fe4ab40 R15: ffff888029210580
[ 417.807801] FS: 00007f339fa7a740(0000) GS:ffff8881fa9b9000(0000) knlGS:0000000000000000
[ 417.808570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 417.809193] CR2: 0000000000000b00 CR3: 000000002a4f0004 CR4: 0000000000370ef0
[ 417.809925] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 417.810622] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 417.811353] Call Trace:
[ 417.811709] <TASK>
[ 417.812038] folio_add_file_rmap_ptes+0x143/0x230
[ 417.812566] insert_page_into_pte_locked+0x1ee/0x3c0
[ 417.813132] insert_page+0x78/0xf0
[ 417.813558] vmf_insert_page_mkwrite+0x55/0xa0
[ 417.814088] dax_fault_iter+0x484/0x7b0
[ 417.814542] dax_iomap_pte_fault+0x1ca/0x620
[ 417.815055] dax_iomap_fault+0x39/0x40
[ 417.815499] __xfs_write_fault+0x139/0x380
[ 417.815995] ? __handle_mm_fault+0x5e5/0x1a60
[ 417.816483] xfs_write_fault+0x41/0x50
[ 417.816966] xfs_filemap_fault+0x3b/0xe0
[ 417.817424] __do_fault+0x31/0x180
[ 417.817859] __handle_mm_fault+0xee1/0x1a60
[ 417.818325] ? debug_smp_processor_id+0x17/0x20
[ 417.818844] handle_mm_fault+0xe1/0x2b0
[...]
The issue is that when we split a large ZONE_DEVICE folio to order-0 ones,
we don't reset the order/_nr_pages. As folio->_nr_pages overlays
page[1]->memcg_data, once page[1] is a folio, it suddenly looks like it
has folio->memcg_data set. And we never manually initialize
folio->memcg_data in fsdax code, because we never expect it to be set at
all.
When __lruvec_stat_mod_folio() then stumbles over such a folio, it tries
to use folio->memcg_data (because it's non-NULL) but it does not actually
point at a memcg, resulting in the problem.
Alison also observed that these folios sometimes have "locked" set, which
is rather concerning (folios locked from the beginning ...). The reason
is that the order for large folios is stored in page[1]->flags, which
become the folio->flags of a new small folio.
Let's fix it by adding a folio helper to clear order/_nr_pages for
splitting purposes.
Maybe we should reinitialize other large folio flags / folio members as
well when splitting, because they might similarly cause harm once page[1]
becomes a folio? At least other flags in PAGE_FLAGS_SECOND should not be
set for fsdax, so at least page[1]->flags might be as expected with this
fix.
From a quick glimpse, initializing ->mapping, ->pgmap and ->share should
re-initialize most things from a previous page[1] used by large folios
that fsdax cares about. For example folio->private might not get
reinitialized, but maybe that's not relevant -- no traces of it's use in
fsdax code. Needs a closer look.
Another thing that should be considered in the future is performing
similar checks as we perform in free_tail_page_prepare()
-- checking pincount etc.
-- when freeing a large fsdax folio.
Link: https://lkml.kernel.org/r/20250410091020.119116-1-david@redhat.com
Fixes: 4996fc547f5b ("mm: let _folio_nr_pages overlay memcg_data in first tail page")
Fixes: 38607c62b34b ("fs/dax: properly refcount fs dax pages")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Alison Schofield <alison.schofield@intel.com>
Closes: https://lkml.kernel.org/r/Z_W9Oeg-D9FhImf3@aschofie-mobl2.lan
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: "Darrick J. Wong" <djwong@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the last page in the zone is accepted, __accept_page() calls
static_branch_dec(). This function takes cpu_hotplug_lock, which can lead
to a deadlock if the allocation occurs during CPU bringup path as
_cpu_up() also takes the lock.
To prevent this deadlock, defer static_branch_dec() to a workqueue.
Call static_branch_dec() only when the workqueue is not yet initialized.
Workqueues are initialized before CPU bring up, so this will not conflict
with the first scenario.
Link: https://lkml.kernel.org/r/20250329171030.3942298-1-kirill.shutemov@linux.intel.com
Fixes: 55ad43e8ba0f ("mm: add a helper to accept page")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.
Running the following commands:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
Would produce nothing, but with the fix it will produce something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc7e5 ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The PXP terminate debugfs currently unconditionally simulates a
termination, no matter what the HW status is. This is unneeded if PXP is
not in use and can cause errors if the HW init hasn't completed yet.
To solve these issues, we can simply limit the terminations to the cases
where PXP is fully initialized and in use.
v2: s/pxp_status/ready/ to avoid confusion with pxp->status (John)
Fixes: 385a8015b214 ("drm/xe/pxp: Add PXP debugfs support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4749
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250416201622.1295369-1-daniele.ceraolospurio@intel.com
(cherry picked from commit ba1f62a0cac84757ca35f4217e3cd3a2654233ae)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The is_vram() is checking the current placement, however if we consider
exported VRAM with dynamic dma-buf, it looks possible for the xe driver
to async evict the memory, notifying the importer, however importer does
not have to call unmap_attachment() immediately, but rather just as
"soon as possible", like when the dma-resv idles. Following from this we
would then pipeline the move, attaching the fence to the manager, and
then update the current placement. But when the unmap_attachment() runs
at some later point we might see that is_vram() is now false, and take
the complete wrong path when dma-unmapping the sg, leading to
explosions.
To fix this check if the sgl was mapping a struct page.
v2:
- The attachment can be mapped multiple times it seems, so we can't
really rely on encoding something in the attachment->priv. Instead
see if the page_link has an encoded struct page. For vram we expect
this to be NULL.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4563
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250410162716.159403-2-matthew.auld@intel.com
(cherry picked from commit d755887f8e5a2a18e15e6632a5193e5feea18499)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4765
Fixes: 0a98219bcc96 ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250414132539.26654-2-matthew.auld@intel.com
(cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The metadata saved in the ADS is read by GuC when it's initialized.
Saving the addresses to the LRCs when they are populated is too late as
GuC will keep using the old ones.
This was causing GuC to use the RCS LRC for any engine class. It's not a
big problem on a Linux-only scenario since the they are used by GuC only
on media engines when the watchdog is triggered. However, in a
virtualization scenario with Windows as the VF, it causes the wrong LRCs
to be loaded as the watchdog is used for all engines.
Fix it by letting guc_golden_lrc_init() initialize the metadata, like
other *_init() functions, and later guc_golden_lrc_populate() to copy
the LRCs to the right places. The former is called before the second GuC
load, while the latter is called after LRCs have been recorded.
Cc: Chee Yin Wong <chee.yin.wong@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Chee Yin Wong <chee.yin.wong@intel.com>
Link: https://lore.kernel.org/r/20250409-fix-guc-ads-v1-1-494135f7a5d0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit c31a0b6402d15b530514eee9925adfcb8cfbb1c9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
ftrace_graph_ent.depth is int, but ftrace_graph_ent_entry.depth is
unsigned long. This confuses trace-cmd on 64-bit big-endian systems and
makes it print a huge amount of spaces. Fix this by using unsigned int,
which has a matching size, instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250412221847.17310-2-iii@linux.ibm.com
Fixes: ff5c9c576e75 ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb470663a ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The subops processing creates new hashes when adding and removing subops.
There were some places that the old hashes that were replaced were not
freed and this caused some memory leaks.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417135939.245b128d@gandalf.local.home
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There's several locations that free a ftrace hash pointer but may be
referenced again. Reset them to EMPTY_HASH so that a u-a-f bug doesn't
happen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417110933.20ab718b@gandalf.local.home
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The reworking to fix and simplify the ftrace_startup_subops() and the
ftrace_shutdown_subops() made it possible for the filter_hash and
notrace_hash variables to be used uninitialized in a way that the compiler
did not catch it.
Initialize both filter_hash and notrace_hash to the EMPTY_HASH as that is
what they should be if they never are used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417104017.3aea66c2@gandalf.local.home
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Closes: https://lore.kernel.org/all/1db64a42-626d-4b3a-be08-c65e47333ce2@linux.ibm.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Subvolume roots and the dirents that point to them are special; they
don't obey the normal snapshot versioning rules because they cross
snapshot boundaries.
We don't keep around older versions of subvolume dirents on rename - we
don't need to, because subvolume dirents are only visible in the parent
subvolume, and we wouldn't be able to match up the different dirent and
inode versions due to crossing the snapshot ID boundary.
That means that when we rename a subvolume, that's been snapshotted, the
older version of the subvolume root will become dangling - it won't have
a dirent that points to it.
That's expected, we just need to tell fsck that this is ok.
Fixes: https://github.com/koverstreet/bcachefs/issues/856
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
kbuf imports have the front offset adjusted and segments removed, but
the tail segments are still included in the segment count that gets
passed in the iov_iter. As the segments aren't necessarily all the
same size, move importing to a separate helper and iterate the
mapped length to get an exact count.
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Android has mounted the v1 cpuset controller using filesystem type
"cpuset" (not "cgroup") since 2015 [1], and depends on the resulting
behavior where the controller name is not added as a prefix for cgroupfs
files. [2]
Later, a problem was discovered where cpu hotplug onlining did not
affect the cpuset/cpus files, which Android carried an out-of-tree patch
to address for a while. An attempt was made to upstream this patch, but
the recommendation was to use the "cpuset_v2_mode" mount option
instead. [3]
An effort was made to do so, but this fails with "cgroup: Unknown
parameter 'cpuset_v2_mode'" because commit e1cba4b85daa ("cgroup: Add
mount flag to enable cpuset to use v2 behavior in v1 cgroup") did not
update the special cased cpuset_mount(), and only the cgroup (v1)
filesystem type was updated.
Add parameter parsing to the cpuset filesystem type so that
cpuset_v2_mode works like the cgroup filesystem type:
$ mkdir /dev/cpuset
$ mount -t cpuset -ocpuset_v2_mode none /dev/cpuset
$ mount|grep cpuset
none on /dev/cpuset type cgroup (rw,relatime,cpuset,noprefix,cpuset_v2_mode,release_agent=/sbin/cpuset_release_agent)
[1] https://cs.android.com/android/_/android/platform/system/core/+/b769c8d24fd7be96f8968aa4c80b669525b930d3
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libprocessgroup/setup/cgroup_map_write.cpp;drc=2dac5d89a0f024a2d0cc46a80ba4ee13472f1681;l=192
[3] https://lore.kernel.org/lkml/f795f8be-a184-408a-0b5a-553d26061385@redhat.com/T/
Fixes: e1cba4b85daa ("cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When adding folio_memcg function call in the zram module for
Android16-6.12, the following error occurs during compilation:
ERROR: modpost: "cgroup_mutex" [../soc-repo/zram.ko] undefined!
This error is caused by the indirect call to lockdep_is_held(&cgroup_mutex)
within folio_memcg. The export setting for cgroup_mutex is controlled by
the CONFIG_PROVE_RCU macro. If CONFIG_LOCKDEP is enabled while
CONFIG_PROVE_RCU is not, this compilation error will occur.
To resolve this issue, add a parallel macro CONFIG_LOCKDEP control to
ensure cgroup_mutex is properly exported when needed.
Signed-off-by: gao xu <gaoxu2@honor.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
|
|
Notice that ignore_dl_rate_limit() need not piggy back on the
limits_changed handling to achieve its goal (which is to enforce a
frequency update before its due time).
Namely, if sugov_should_update_freq() is updated to check
sg_policy->need_freq_update and return 'true' if it is set when
sg_policy->limits_changed is not set, ignore_dl_rate_limit() may
set the former directly instead of setting the latter, so it can
avoid hitting the memory barrier in sugov_should_update_freq().
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/10666429.nUPlyArG6x@rjwysocki.net
|
Kan Liang
Luo Gengkun
Namhyung Kim
Frederick Lawler
Linus Torvalds
Christian Brauner
Rob Clark
Steven Rostedt
Ard Biesheuvel
Sandipan Das
Pavel Begunkov
Lorenzo Stoakes
Johannes Weiner
David Hildenbrand
Oscar Salvador
Andreas Gruenbacher
Ahmad Fatoum
Baoquan He
Liam R. Howlett
Muchun Song
Vlastimil Babka
Kirill A. Shutemov
Daniele Ceraolo Spurio
Matthew Auld
Lucas De Marchi
Ilya Leoshkevich
Menglong Dong
Kent Overstreet
Jens Axboe
T.J. Mercier
gaoxu
Rafael J. Wysocki