| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
HP ProBook 445/465 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605092243.41963-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion from System Reset event to UMP was missing.
Add the entry for a conversion to a proper UMP System message.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531123718.13420-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid.
Fixes: 7cf5ce66dfda ("ALSA: hda: cs35l41: Add device_link between HDA and cs35l41_hda")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240531120820.35367-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The codec should be cleared when the amp driver is unbound and when
resuming it should be tested to prevent loading firmware into the device
and ALSA in a partially configured system state.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240531112716.25323-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.
In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.
In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.
In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel
Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.
Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the duplicated code paths to check for single bit depth and to
update the params with storing the parameters needed by the function and
have a single code section.
No functional change but the code is easier to follow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the sof_ipc4_copier_is_single_format() to
sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of
'format' when we are querying information on the bit depth.
Format is used to describe a combination of parameters (rate, channels,
sample format / bit depth).
Rename the flags used to store the result at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Print out the number of channels for the format explicitly instead of
having the reader to understand how to interpret the ch_map and ch_cfg
values.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae76 ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We fixed the incorrect UMP type for system messages in the recent
commit, but it missed one place in system_ev_to_ump_midi1().
Fix it now.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Fixes: c2bb79613fed ("ALSA: seq: Fix incorrect UMP type for system messages")
Link: https://lore.kernel.org/r/20240530101044.17524-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When an inquiry of the current protocol via UMP Stream Configuration
message fails by some reason, we may leave the current protocol
undefined, which may lead to unexpected behavior. Better to assume a
valid protocol found in the protocol capability bits instead.
For a device that doesn't support the UMP v1.2 feature, it won't reach
to this code path, and USB MIDI GTB descriptor would be used for
determining the protocol, instead.
Link: https://lore.kernel.org/r/20240529164723.18309-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a UMP Stream Configuration message is received, the driver tries
to switch the protocol, but there was no sanity check of the protocol,
hence it can pass an invalid value. Add the check and bail out if a
wrong value is passed.
Fixes: a79807683781 ("ALSA: ump: Add helper to change MIDI protocol")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529164723.18309-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.
Fixes: 648fea128476 ("ASoC: SOF: ipc4-topology: set copier output format for process module")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The addition of the Cirrus Logic 'sidecar' amps adds a dependency on SPI_MASTER.
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for SND_SOC_CS35L56_SPI
Depends on [n]:
SOUND [=y] && SND [=y] && SND_SOC [=y] && SPI_MASTER [=n] &&
(SOUNDWIRE [=y] || !SOUNDWIRE [=y])
Selected by [y]:
- SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=y] && SOUND [=y] && SND [=y]
&& SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && I2C [=y] && ACPI [=y] &&
(MFD_INTEL_LPSS [=y] || COMPILE_TEST [=n]) &&
(SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES [=y] || COMPILE_TEST
[=n]) && SOUNDWIRE [=y]
Fixes: b831b4dca48d ("ASoC: intel: sof_sdw: Add support for cs42l43-cs35l56 sidecar amps")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405140758.o2HY4nYD-lkp@intel.com/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240527191940.30107-1-pierre-louis.bossart@linux.intel.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the typo in the comment for SNDRV_PCM_RATE_KNOT
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240528191850.63314-1-alexandre.belloni@bootlin.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current code clears the bank selection MSB/LSB after sending a
program change, but this can be wrong, as many apps may not send the
full bank selection with both MSB and LSB but sending only one.
Better to keep the previous bank set.
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529083823.5778-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When converting a legacy system message to a UMP packet, it forgot to
modify the UMP type field but keeping the default type (either type 2
or 4). Correct to the right type for system messages.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529083800.5742-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The information on PCI class/subclass was interesting in the Skylake
timeframe, since the DSP was only enabled on a limited number of
platforms. Now most Intel platforms do enable the DSP, so the
information is less interesting to log.
When a DSP driver is used, the common helper may be called multiple
times due to deferred probes, but there's no reason to print the same
information multiple times. Using dev_info_once() covers all the
existing usages for internal cards with DSPs. External cards don't
rely on DSPs so far.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240527193808.165652-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current code to convert from a legacy sequencer event to UMP MIDI2
clears the bank selection at each time the program change is
submitted. This is confusing and may lead to incorrect bank values
tranmitted to the destination in the end.
Drop the line to clear the bank info and keep the provided values.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a UMP packet is converted between MIDI1 and MIDI2 protocols, the
bank selection may be lost. The conversion from MIDI1 to MIDI2 needs
the encoding of the bank into UMP_MSG_STATUS_PROGRAM bits, while the
conversion from MIDI2 to MIDI1 needs the extraction from that
instead.
This patch implements the missing bank selection mechanism in those
conversions.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MODULE_DESCRIPTION() was optional until it became mandatory and
flagged as an error by 'make W=1'.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow the arbitrary Intel convention order to allow for easier grep.
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The module information is spread across files, group in a single
location. For maintenability and alignment, the arbitrary Intel
convention is used with the following order:
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This file is part of the snd-sof module, there's no reason to re-add the
MODULE_LICENSE here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
James no longer works for Cirrus Logic, remove him from the list of
maintainers for the Cirrus audio CODEC drivers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240527101326.440345-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
wm_adsp is built as a separate module and as such should include a
MODULE_DESCRIPTION() macro.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240527100237.430240-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SoundWire interface can always support 44.1kHz using flow controlled
mode, and whether the ASP is in master mode should obviously only affect
the ASP. Update cs42l43_startup() to only restrict the rates for the ASP
DAI.
Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240527100840.439832-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 2024 ASUS ROG G814J model is much the same as the 2023 model
and the 2023 16" version. We can use the same Cirrus Amp quirk.
Fixes: 811dd426a9b1 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240526091032.114545-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The card-specific debugfs entries are removed at the last stage of
card free phase, and it's performed after synchronization of the
closes of all opened fds. This works fine for most cases, but it can
be potentially problematic for a hotplug device like USB-audio. Due
to the nature of snd_card_free_when_closed(), the card free isn't
called immediately after the driver removal for a hotplug device, but
it's left until the last fd is closed. It implies that the card
debugfs entries also remain. Meanwhile, when a new device is inserted
before the last close and the very same card slot is assigned, the
driver tries to create the card debugfs root again on the very same
path. This conflicts with the remaining entry, and results in the
kernel warning such as:
debugfs: Directory 'card0' with parent 'sound' already present!
with the missing debugfs entry afterwards.
For avoiding such conflicts, remove debugfs entries at the device
disconnection phase instead. The jack kctl debugfs entries get
removed in snd_jack_dev_disconnect() instead of each kctl
private_free.
Fixes: 2d670ea2bd53 ("ALSA: jack: implement software jack injection via debugfs")
Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.
This fixes a randconfig build error on mips:
include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493.
This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.
The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Occasionally, the generic/001 xfstest will fail indicating corruption in
one of the copy chains when run on cifs against a server that supports
FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs). The
problem is that the remote_i_size value isn't updated by cifs_setsize()
when called by smb2_duplicate_extents(), but i_size *is*.
This may cause cifs_remap_file_range() to then skip the bit after calling
->duplicate_extents() that sets sizes.
Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before
calling cifs_setsize() to set i_size.
This means we don't then need to call netfs_resize_file() upon return from
->duplicate_extents(), but we also fix the test to compare against the pre-dup
inode size.
[Note that this goes back before the addition of remote_i_size with the
netfs_inode struct. It should probably have been setting cifsi->server_eof
previously.]
Fixes: cfc63fc8126a ("smb3: fix cached file size problems in duplicate extents (reflink)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix smb3_insert_range() to move the zero_point over to the new EOF.
Without this, generic/147 fails as reads of data beyond the old EOF point
return zeroes.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The commit 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page
deduplication limit") introduced a possible failure case in the
stable_tree_insert(), where we may free the new allocated stable_node_dup
if we fail to prepare the missing chain node.
Then that kfolio return and unlock with a freed stable_node set... And
any MM activities can come in to access kfolio->mapping, so UAF.
Fix it by moving folio_set_stable_node() to the end after stable_node
is inserted successfully.
Link: https://lkml.kernel.org/r/20240513-b4-ksm-stable-node-uaf-v1-1-f687de76f452@linux.dev
Fixes: 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page deduplication limit")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When I did memory failure tests recently, below panic occurs:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:1009!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:__del_page_from_free_list+0x151/0x180
RSP: 0018:ffffa49c90437998 EFLAGS: 00000046
RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0
RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69
R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80
R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009
FS: 00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0
Call Trace:
<TASK>
__rmqueue_pcplist+0x23b/0x520
get_page_from_freelist+0x26b/0xe40
__alloc_pages_noprof+0x113/0x1120
__folio_alloc_noprof+0x11/0xb0
alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130
__alloc_fresh_hugetlb_folio+0xe7/0x140
alloc_pool_huge_folio+0x68/0x100
set_max_huge_pages+0x13d/0x340
hugetlb_sysctl_handler_common+0xe8/0x110
proc_sys_call_handler+0x194/0x280
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff916114887
RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887
RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003
RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0
R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004
R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
And before the panic, there had an warning about bad page state:
BUG: Bad page state in process page-types pfn:8cee00
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
page_type: 0xffffff7f(buddy)
raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22
Call Trace:
<TASK>
dump_stack_lvl+0x83/0xa0
bad_page+0x63/0xf0
free_unref_page+0x36e/0x5c0
unpoison_memory+0x50b/0x630
simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
debugfs_attr_write+0x42/0x60
full_proxy_write+0x5b/0x80
vfs_write+0xcd/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f189a514887
RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887
RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003
RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8
R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040
</TASK>
The root cause should be the below race:
memory_failure
try_memory_failure_hugetlb
me_huge_page
__page_handle_poison
dissolve_free_hugetlb_folio
drain_all_pages -- Buddy page can be isolated e.g. for compaction.
take_page_off_buddy -- Failed as page is not in the buddy list.
-- Page can be putback into buddy after compaction.
page_ref_inc -- Leads to buddy page with refcnt = 1.
Then unpoison_memory() can unpoison the page and send the buddy page back
into buddy list again leading to the above bad page state warning. And
bad_page() will call page_mapcount_reset() to remove PageBuddy from buddy
page leading to later VM_BUG_ON_PAGE(!PageBuddy(page)) when trying to
allocate this page.
Fix this issue by only treating __page_handle_poison() as successful when
it returns 1.
Link: https://lkml.kernel.org/r/20240523071217.1696196-1-linmiaohe@huawei.com
Fixes: ceaf8fbea79a ("mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After switching smaps_rollup to use VMA iterator, searching for next entry
is part of the condition expression of the do-while loop. So the current
VMA needs to be addressed before the continue statement.
Otherwise, with some VMAs skipped, userspace observed memory
consumption from /proc/pid/smaps_rollup will be smaller than the sum of
the corresponding fields from /proc/pid/smaps.
Link: https://lkml.kernel.org/r/20240523183531.2535436-1-yzhong@purestorage.com
Fixes: c4c84f06285e ("fs/proc/task_mmu: stop using linked list and highest_vm_end")
Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
nilfs_detach_log_writer
nilfs_segctor_destroy
nilfs_segctor_kill_thread --> Shut down log writer thread
flush_work
nilfs_iput_work_func
nilfs_dispose_list
iput
nilfs_evict_inode
nilfs_transaction_commit
nilfs_construct_segment (if inode needs sync)
nilfs_segctor_sync --> Attempt to synchronize with
log writer thread
*** DEADLOCK ***
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().
Link: https://lkml.kernel.org/r/20240520132621.4054-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e3973c409251e136fdd0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e3973c409251e136fdd0
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A potential and reproducible race issue has been identified where
nilfs_segctor_sync() would block even after the log writer thread writes a
checkpoint, unless there is an interrupt or other trigger to resume log
writing.
This turned out to be because, depending on the execution timing of the
log writer thread running in parallel, the log writer thread may skip
responding to nilfs_segctor_sync(), which causes a call to schedule()
waiting for completion within nilfs_segctor_sync() to lose the opportunity
to wake up.
The reason why waking up the task waiting in nilfs_segctor_sync() may be
skipped is that updating the request generation issued using a shared
sequence counter and adding an wait queue entry to the request wait queue
to the log writer, are not done atomically. There is a possibility that
log writing and request completion notification by nilfs_segctor_wakeup()
may occur between the two operations, and in that case, the wait queue
entry is not yet visible to nilfs_segctor_wakeup() and the wake-up of
nilfs_segctor_sync() will be carried over until the next request occurs.
Fix this issue by performing these two operations simultaneously within
the lock section of sc_state_lock. Also, following the memory barrier
guidelines for event waiting loops, move the call to set_current_state()
in the same location into the event waiting loop to ensure that a memory
barrier is inserted just before the event condition determination.
Link: https://lkml.kernel.org/r/20240520132621.4054-3-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "nilfs2: fix log writer related issues".
This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.
This patch (of 3):
A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.
The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.
Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive.
Link: https://lkml.kernel.org/r/20240520132621.4054-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240520132621.4054-2-konishi.ryusuke@gmail.com
Fixes: fdce895ea5dd ("nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: "Bai, Shuangpeng" <sjb7183@psu.edu>
Closes: https://groups.google.com/g/syzkaller/c/MK_LYqtt8ko/m/8rgdWeseAwAJ
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix warnings like:
In file included from uffd-unit-tests.c:8:
uffd-unit-tests.c: In function `uffd_poison_handle_fault':
uffd-common.h:45:33: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 3 has type `__u64' {aka `long
unsigned int'} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Link: https://lkml.kernel.org/r/20240521030219.57439-1-mpe@ellerman.id.au
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Klara Modin reported warnings for a kernel configured with BPF_JIT but
without MODULES:
[ 44.131296] Trying to vfree() bad address (000000004a17c299)
[ 44.138024] WARNING: CPU: 1 PID: 193 at mm/vmalloc.c:3189 remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.146675] CPU: 1 PID: 193 Comm: kworker/1:2 Tainted: G D W 6.9.0-01786-g2c9e5d4a0082 #25
[ 44.158229] Hardware name: Raspberry Pi 3 Model B (DT)
[ 44.164433] Workqueue: events bpf_prog_free_deferred
[ 44.170492] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 44.178601] pc : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.183705] lr : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.188772] sp : ffff800082a13c70
[ 44.193112] x29: ffff800082a13c70 x28: 0000000000000000 x27: 0000000000000000
[ 44.201384] x26: 0000000000000000 x25: ffff00003a44efa0 x24: 00000000d4202000
[ 44.209658] x23: ffff800081223dd0 x22: ffff00003a198a40 x21: ffff8000814dd880
[ 44.217924] x20: 00000000d4202000 x19: ffff8000814dd880 x18: 0000000000000006
[ 44.226206] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000002
[ 44.234460] x14: ffff8000811a6370 x13: 0000000020000000 x12: 0000000000000000
[ 44.242710] x11: ffff8000811a6370 x10: 0000000000000144 x9 : ffff8000811fe370
[ 44.250959] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000811fe370
[ 44.259206] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 44.267457] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000002203240
[ 44.275703] Call trace:
[ 44.279158] remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.283858] vfree (mm/vmalloc.c:3322)
[ 44.287835] execmem_free (mm/execmem.c:70)
[ 44.292347] bpf_jit_free_exec+0x10/0x1c
[ 44.297283] bpf_prog_pack_free (kernel/bpf/core.c:1006)
[ 44.302457] bpf_jit_binary_pack_free (kernel/bpf/core.c:1195)
[ 44.307951] bpf_jit_free (include/linux/filter.h:1083 arch/arm64/net/bpf_jit_comp.c:2474)
[ 44.312342] bpf_prog_free_deferred (kernel/bpf/core.c:2785)
[ 44.317785] process_one_work (kernel/workqueue.c:3273)
[ 44.322684] worker_thread (kernel/workqueue.c:3342 (discriminator 2) kernel/workqueue.c:3429 (discriminator 2))
[ 44.327292] kthread (kernel/kthread.c:388)
[ 44.331342] ret_from_fork (arch/arm64/kernel/entry.S:861)
The problem is because bpf_arch_text_copy() silently fails to write to the
read-only area as a result of patch_map() faulting and the resulting
-EFAULT being chucked away.
Update patch_map() to use CONFIG_EXECMEM instead of
CONFIG_STRICT_MODULE_RWX to check for vmalloc addresses.
Link: https://lkml.kernel.org/r/20240521213813.703309-1-rppt@kernel.org
Fixes: 2c9e5d4a0082 ("bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/7983fbbf-0127-457c-9394-8d6e4299c685@gmail.com
Tested-by: Klara Modin <klarasmodin@gmail.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Reset nr_hugepages to zero before the start of the test.
If a non-zero number of hugepages is already set before the start of the
test, the following problems arise:
- The probability of the test getting OOM-killed increases. Proof:
The test wants to run on 80% of available memory to prevent OOM-killing
(see original code comments). Let the value of mem_free at the start
of the test, when nr_hugepages = 0, be x. In the other case, when
nr_hugepages > 0, let the memory consumed by hugepages be y. In the
former case, the test operates on 0.8 * x of memory. In the latter,
the test operates on 0.8 * (x - y) of memory, with y already filled,
hence, memory consumed is y + 0.8 * (x - y) = 0.8 * x + 0.2 * y > 0.8 *
x. Q.E.D
- The probability of a bogus test success increases. Proof: Let the
memory consumed by hugepages be greater than 25% of x, with x and y
defined as above. The definition of compaction_index is c_index = (x -
y)/z where z is the memory consumed by hugepages after trying to
increase them again. In check_compaction(), we set the number of
hugepages to zero, and then increase them back; the probability that
they will be set back to consume at least y amount of memory again is
very high (since there is not much delay between the two attempts of
changing nr_hugepages). Hence, z >= y > (x/4) (by the 25% assumption).
Therefore, c_index = (x - y)/z <= (x - y)/y = x/y - 1 < 4 - 1 = 3
hence, c_index can always be forced to be less than 3, thereby the test
succeeding always. Q.E.D
Link: https://lkml.kernel.org/r/20240521074358.675031-4-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, the test tries to set nr_hugepages to zero, but that is not
actually done because the file offset is not reset after read(). Fix that
using lseek().
Link: https://lkml.kernel.org/r/20240521074358.675031-3-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fixes for compaction_test", v2.
The compaction_test memory selftest introduces fragmentation in memory
and then tries to allocate as many hugepages as possible. This series
addresses some problems.
On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since
compaction_index becomes 0, which is less than 3, due to no division by
zero exception being raised. We fix that by checking for division by
zero.
Secondly, correctly set the number of hugepages to zero before trying
to set a large number of them.
Now, consider a situation in which, at the start of the test, a non-zero
number of hugepages have been already set (while running the entire
selftests/mm suite, or manually by the admin). The test operates on 80%
of memory to avoid OOM-killer invocation, and because some memory is
already blocked by hugepages, it would increase the chance of OOM-killing.
Also, since mem_free used in check_compaction() is the value before we
set nr_hugepages to zero, the chance that the compaction_index will
be small is very high if the preset nr_hugepages was high, leading to a
bogus test success.
This patch (of 3):
Currently, if at runtime we are not able to allocate a huge page, the test
will trivially pass on Aarch64 due to no exception being raised on
division by zero while computing compaction_index. Fix that by checking
for nr_hugepages == 0. Anyways, in general, avoid a division by zero by
exiting the program beforehand. While at it, fix a typo, and handle the
case where the number of hugepages may overflow an integer.
Link: https://lkml.kernel.org/r/20240521074358.675031-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20240521074358.675031-2-dev.jain@arm.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update mailmap with my latest email ID, quic_c_skakit@quicinc.com
is no longer active.
Link: https://lkml.kernel.org/r/20240515-mailmap-update-v1-1-df4853f757a3@quicinc.com
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Cc: Ajit Pandey <quic_ajipan@quicinc.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Imran Shaik <quic_imrashai@quicinc.com>
Cc: Jagadeesh Kona <quic_jkona@quicinc.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When I did memory failure tests recently, below panic occurs:
kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
Call Trace:
<TASK>
do_shrink_slab+0x14f/0x6a0
shrink_slab+0xca/0x8c0
shrink_node+0x2d0/0x7d0
balance_pgdat+0x33a/0x720
kswapd+0x1f3/0x410
kthread+0xd5/0x100
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
The root cause is that HWPoison flag will be set for huge_zero_folio
without increasing the folio refcnt. But then unpoison_memory() will
decrease the folio refcnt unexpectedly as it appears like a successfully
hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when
releasing huge_zero_folio.
Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue.
We're not prepared to unpoison huge_zero_folio yet.
Link: https://lkml.kernel.org/r/20240516122608.22610-1-linmiaohe@huawei.com
Fixes: 478d134e9506 ("mm/huge_memory: do not overkill when splitting huge_zero_page")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*()
functions") and the follow-up fixes, with CONFIG_FORTIFY_SOURCE enabled,
even though the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, FORTIFY_SOURCE still uses
uninstrumented memset/memmove/memcpy as the underlying functions.
As a result, KASAN cannot detect bad accesses in memset/memmove/memcpy.
This also makes KASAN tests corrupt kernel memory and cause crashes.
To fix this, use __asan_/__hwasan_memset/memmove/memcpy as the underlying
functions whenever appropriate. Do this only for the instrumented code
(as indicated by __SANITIZE_ADDRESS__).
Link: https://lkml.kernel.org/r/20240517130118.759301-1-andrey.konovalov@linux.dev
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Fixes: 51287dcb00cc ("kasan: emit different calls for instrumentable memintrinsics")
Fixes: 36be5cba99f6 ("kasan: treat meminstrinsic as builtins in uninstrumented files")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Reported-by: Nico Pache <npache@redhat.com>
Closes: https://lore.kernel.org/all/20240501144156.17e65021@outsider.home/
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Nico Pache <npache@redhat.com>
Acked-by: Nico Pache <npache@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add version string and a header at the beginning of /proc/allocinfo to
allow later format changes. Example output:
> head /proc/allocinfo
allocinfo - version: 1.0
# <size> <calls> <tag info>
0 0 init/main.c:1314 func:do_initcalls
0 0 init/do_mounts.c:353 func:mount_nodev_root
0 0 init/do_mounts.c:187 func:mount_root_generic
0 0 init/do_mounts.c:158 func:do_mount_root
0 0 init/initramfs.c:493 func:unpack_to_rootfs
0 0 init/initramfs.c:492 func:unpack_to_rootfs
0 0 init/initramfs.c:491 func:unpack_to_rootfs
512 1 arch/x86/events/rapl.c:681 func:init_rapl_pmus
128 1 arch/x86/events/rapl.c:571 func:rapl_cpu_online
[akpm@linux-foundation.org: remove stray newline from struct allocinfo_private]
Link: https://lkml.kernel.org/r/20240514163128.3662251-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Andy Chi
Takashi Iwai
Simon Trimmer
Peter Ujfalusi
Pierre-Louis Bossart
Alexandre Belloni
Charles Keepax
Luke D. Jones
Linus Torvalds
Kent Overstreet
Arnaldo Carvalho de Melo
David Howells
Chengming Zhou
Miaohe Lin
Yuanyuan Zhong
Ryusuke Konishi
Michael Ellerman
Will Deacon
Dev Jain
Satya Priya Kakitapalli
Andrey Konovalov
Suren Baghdasaryan